377-026 - GPS Fire Alarm Upgrades - Addendum 01 (Package).pdf

Date: 10/26/2026

Owner: Greenville Public Schools

Project Name: Fire Alarm Upgrades

Location: Baldwin Heights Elementary - 821 W Oak St, Greenville, MI 48838 Cedar Crest Elementary - 622 S Cedar St., Greenville, MI 48838 Walnut Hills Elementary - 712 N. Walnut St., Greenville, MI 48838

CM No.: 377-026

A/E No.: 25.118

ADDENDUM NO. 01

SPECIAL NOTE:

The Notice to Bidders, Instruction to Bidders, General Conditions of the Contract Construction, Supplementary

Conditions of the Contract for Construction, and all modifications and previously issued Contract Documentation are a part of the Addendum.

SCOPE OF WORK:

The following items are changes, additions, deletions, clarifications and/or errors and omissions in the plans and specifications and shall be considered by each Bidder regarding their proposal submitted. This document and all its entirety shall be considered part of the Contract Documents.

NOTICE TO ALL BIDDERS:

It is the responsibility of the Bidder to take note of all items covered in this Addendum. It is the responsibility of the

Bidder to review all documentations in total regarding their scope of work and any work that will interface with their scope of work.

ATTACHMENTS:

Specifications: NA

Drawings: NA

Other: Pre-Bid Walk-Thru Minutes & Attendance RFI Questions #1-3 & Responses

GREENVILLE PUBLIC SCHOOLS

Fire Alarm Upgrades

SPECIFICATIONS CLARIFICATIONS / REVISIONS:

(NA)

SHEET CLARIFICATIONS / REVISIONS:

(NA)

OTHER:

ITEM NO. 1: PRE-BID WALK-THRU MINUTES & ATTENDANCE

Pre-Bid walk through minutes and attendance are included in this Addendum.

ITEM NO. 2: RFI QUESTIONS & RESPONSES

RFI questions #1-3 submitted by contractors and the responses are included in this Addendum.

PRE-BID MEETING MINUTES

LOCATION: Cedar Crest Elementary, Walnut Hills Elementary, Baldwin Heights Elementary

DATE & TIME: October 15, 2026 | 4:45 @ Cedar Crest, 5:30 @ Walnut Hills, 6:00 @ Baldwin Heights

1. Introduction of Project Team

a. Justin Rees - GPS

b. Craig Janetzke, Ben Sage - Kingscott

c. Fritz Wahlfield III - FWC

2. Review Project Front End

a. Bid Form with Bid Bond

b. Disclosure Forms

c. RFI’s due by October 19, 2026 BY 10:00 A.M.

d. Bids Due by October 28, 2026 at 1:00 P.M.

e. Public Opening @ Administration Building

i. October 28, 2026 at 1:00 P.M.

f. Owners’ Rights

g. Post Bid Interviews (Mandatory)

i. October 30, 2026

h. Project Dates:

*Note: This Bid Package will be completed in phases over a three-year period, with one (1) school scheduled for completion each summer as stated below:

i. Fire Alarm Upgrades - Cedar Crest Elementary

1. Begin Construction: June 2027 (Summer Break)

2. Substantial Completion: August 9, 2027

ii. Fire Alarm Upgrades - Walnut Hills Elementary

1. Begin Construction: June 2028 (Summer Break)

2. Substantial Completion: August 7, 2028

iii. Fire Alarm Upgrades - Baldwin Heights Elementary

1. Begin Construction: June 2029 (Summer Break)

2. Substantial Completion: August 6, 2029

3. Overview of the Project

a. Fire Alarm upgrades to Multiple buildings.

b. Permitting will be Local

c. Site Access - In & Out Times

4. Rules & Guidelines

a. Alcohol, Drugs, and Tobacco Free Zone

b. Weapons Free Zone

5. Bid Notes

a. General Dumpster provided by CM

6. Review of the Site

7. End of Pre-Bid Meeting

Pre-Bid RFI'S 377-026 - Fire Alarm Upgrades

Bid Trade Subcontractor / Contact RFI # Addendum

Vendor National Time & Signal / Aaron Bauman 1 1

Vendor EPS Security / David Drake 2 1

Fire Protection Universal Fire Protection / Tom Danner 3 1

REQUEST FOR INFORMATION (RFI) FORM

Project: Fire Alarm Upgrades Date: ________________

Deadline: OCTOBER 19, 2026 BY 10:00 A.M Action Requested:

______ Clarification Attn: Fritz Wahlfield III, Fritz Wahlfield Construction (CM) ______ Direction ______ Approval Company: __________________________________________________ ______ Alternate Contact: ___________________________________________________ ______ Other Email: _____________________________________________________ Phone No:__________________________________________________

Reference Drawing No: __________________________ Detail No: ___________ Spec. Section: ___________ Request Information:

RFI #: _________

CM Recommendation:

By: _______________________________ Date: ________________ AE Recommendation:

By: _______________________________ Date: ________________

National Time and Signal Aaron Bauman abauman@natsco.net

(248) 773-9321

10/7/2026

28 4621 2.2 A.

Manufacturers

X

National Time and Signal would like to submit a request to be added as an approved equal acceptable manufacturer in the fire alarm specifications.

See AE Recommendation

AB 10.7.26

NATIONAL TIME AND SIGNAL MAY SUBMIT AS AN ACCEPTABLE VOLUNTARY ALTERANTE FOR THIS PROJECT

10/16/2026

The 901 Fire Alarm Series combines modular design with ease of installation and field service-ability expected from a respected industry leader for over 100 years. Begin with National’s highly reliable state-of-the-art addressable system, and build a system to suit installations from small single story to large high rises. The 901 series can be a stand-alone single panel or network with any National Time FACP series to create a distributed system rivaled by no other.

Audio evacuation and paging options can be added allowing building occupants to feel safe and secure. Point annunciation options can range from bullet style LEDs, to graphic map an-nunciators, to National’s exclusive Interactive Graphic Display (IGD) allowing first responders to quickly access building status. A Color Graphic workstation can provide advanced control for building personnel. For off-site access to information, there is no equal to On-PointTM Central that can provide live system status complete with building maps, text and e-mail messaging and more through an internet connection.

The 901 Series FACP innovative chassis design concept eases installation effort and provides clear access to all field connections. Multiple box and trim combinations create an attractive and versatile installation.

Tel: (248) 380-6264 • (800) 326-8456 • Fax: (248) 380-6268 • 28045 Oakland Oaks Court • Wixom, MI 48393 w w w . n a t s c o . n e t

Capabilities:

DigiCommTM Addressable Loops

Horn-Strobe or Speaker-Strobe Systems

Local and Remote Paging

Digital Recorded Messages

Zone Paging Control

Programmable Swtiches & Status LEDs

Style Y (Class B) or Style Z (Class A)

Synchronized Control of Horns and Strobes

Silence Horns with Strobes Operating on a Single Pair of Wires

Networkable with all National Panels

Modular, Expandable Design

Internet Connectivity

On-PointTM Central Compatible

UL Listed

901 Series Fire Alarm Control Panel

Tel: (248) 380-6264 • Fax: (248) 380-6268 • 28045 Oakland Oaks Court • Wixom, MI 48393w w w . n a t s c o . n e t w w w . n a t s c o . n e t BULLETIN F-554 RevD

Options and Part Numbers

General Module and Option Ordering Information

Order No. Bulletin Description

1 A901-CHASSIS-CP F-561 901 Series Control Panel Mounting Chassis

2 A901-CPU Computer Processing Unit with Display and User Controls (shown hinge open)

3 A901-POWER Power Board, 2 NAC Outputs, Auxiliary Power, Battery Charger

4 A901-DIGI (2) DigiCommTM Addressable Loops, Auxiliary Relays

5 A901-LAN 901 Series Local Area Network module

6 A901-LA-MIC-SS F-564 Local Annunciator with Microphone (-SS version shown,-LS,-LL,-SB etc.)

7 A901-LA-SSSS F-564 Local Annunciator (not shown, -SSSS,-SSLL,-SSBB etc.)

8 A901-CTRL AV-2 F-562 Dual Addressable Audio/Visual Output Module Assembly

9 A901-CTRL IO-2 F-562 Dual Addressable Input/Output Module Assembly

10 A901-BLANK F-564 901 Series Blank Cover Plate (Shown removed)

11 A901-CHASSIS-AMP F-561 901 Series Amplifier Mounting Chassis

12 A901-AMP-100 901 Series Amplifier Assembly ,100 Watt. (-25, -50, -100 Versions avail.)

13 A901-CTRL AVIO F-562 Addressable Audio/Visual and Input/Output Modules Assembly

14 A901-CTRL AV F-562 Addressable Audio/Visual Output Module Assembly

15 A901-BOX-DUAL-F-WS F-555 Dual Flush Mount Box with Window Door/Solid Door (shown front page)

16 A901-RS485 901 Series RS485 Network Module

A901-FACP

Example Layout

4 3 11

Shown in A901-BOX-SINGLE-F-W Shown in A901-BOX-SINGLE-S-W Shown in A901-BOX-DUAL-F-WW

Box and Door Ordered Separately. See Bulletin F-555: 901 Cabinets

Tel: (248) 380-6264 • (800) 326-8456 • Fax: (248) 380-6268 • 28045 Oakland Oaks Court • Wixom, MI 48393 w w w . n a t s c o . n e t

The NATIONAL TIME A902-RPS Series Remote Power Supply is designed to meet the needs of your increasing power requirements. The 902-RPS provides two styles, Y or Z conventional Notification Appliance Circuit (NAC) rated for a total of 5 Amps. The 24 VDC (0.5 Amp) auxiliary power output provide for system application flexibility.

The A902-RPS Series version, in addition, provides two input control circuits to direct the activation of the two NAC output circuits. The two input control circuits are activated by a 24VDC reverse polarity or dry contact. The 902-RPS trouble relay provides polarized or dry (form C) contact outputs. The 902-RPS (with standard firmware) provides three available evacuation rates selectable on a per circuit basis:

continuous, march time and temporal.

The A902-RPS-SG Series version provides all the features of the standard 902-RPS and is capable of synchronized horn (temporal) and strobe operation directly from the power supply without the need of a synchronization module. This provides horn (temporal) and strobe synchronization with independent control (alarm silence capability) on the same pair of wires.

A902 –RPS-SG Shown

Features:

• 5 Amps of Notification Appliance Power

• 2 Notification Appliance Circuits

• Synchronized Horn/Strobe Operation on a Single Pair of Wires

• Silence Horns with Strobes Operating on a Single Pair of Wires

• 24 VDC Auxiliary Power Output

• Trouble Contacts

• Expandable Design

• Dry Contact Activation

• Reverse Polarity Activation

• U.L. Listed

National Time and Signal w w w . n a t s c o . n e t Bulletin F - 376 REV A

ORDERING INFORMATION AND SPECIFICATIONS

Primary Power: 120VAC or (240VAC) @ 50/60Hz Battery Power: 24 VDC

NAC Power: 5 Amps Remote Input Power: Rev. Polarity 19VDC to 31 VDC and /or Dry contact

Auxiliary Power: 24VDC @ .5Amax.

Trouble Contacts: Form “C” 24VDC/5A or Polarized 24VDC /0.2A

Max. Temp Range: 32° -120°F (0-49°C) Humidity: 85% Non-Condensing Max.

Dimensions: 12” W x 15”H x 4”D

Modules. Description A902-RPS-SG Remote Synchronized Fire Alarm Power Supply A902-RPS-SG-240 Remote Synchronized Fire Alarm Power Supply (240VAC version)

Accessories

Part No. Description A902-PC-CG 5 Ampere Hour – 24VDC Battery Pack

Page|2

Wiring Diagrams

Specifications

Ordering Information

NATIONAL TIME 540 Series Fire Alarm Pull Stations are high quality, die-cast metal devices available in either single or dual-action configurations with SPST or DPST switches. They include either wire lead or terminal strip connections. The normally open contact, which closes when the pull station is activated, is rated for 1 amp, at 125 VAC, or 30 VDC. The contacts are gold-plated to avoid risk of corrosion. All models in the series have been tested by UL for compliance to the latest requirements of the Americans with Disabilities

Act (ADA).

The 540 Series is operated by simply pulling the handle on the front of the station as far down as it will go. The handle locks into place indicating its activated status. The station is restored to normal with the use of a key. Standard models are provided with identically keyed locks and come with one key and one scored acrylic break-rod. On the 540D and

542D dual action models, the Push bar rotates inward allowing the Pull handle to be grasped in a one-handed motion.

Tel: (248) 380-6264 • (800) 326-8456 • Fax: (248) 380-6268 • 28045 Oakland Oaks Court • Wixom, MI 48393 w w w . n a t s c o . n e t

Features:

• Single or dual action modules

• Semi-flush mounts on single gang box

• High gloss red enamel finish

• Anti-corrosion gold-plated contacts

• ADA compliant

• UL listed

• Surface boxes optional

• DPST switch available

540 SERIES PULL STATIONS

541S Shown

Tel: (248) 380-6264 • Fax: (248) 380-6268 • 28045 Oakland Oaks Court • Wixom, MI 48393w w w . n a t s c o . n e t w w w . n a t s c o . n e t BULLETIN F-350 RevD

Ordering Information and Specifications

Mounting & Wiring Diagrams

Ordering Information & Specifications

MODEL

NUMBER

ACTION VOLTAGE

AC/DC

AMPS CONNECTION SWITCH

TYPE

541S SINGLE 125/30 1A WIRE LEADS SPST

541D DUAL 125/30 1A WIRE LEADS SPST

542S SINGLE 125/30 1A TERMINALS DPST

542D DUAL 125/30 1A TERMINALS DPST

MODEL NUMBER ACCESSORY DESCRIPTION

540B RED INTERIOR SURFACE BOX

540B-WP RED WEATHERPROOF SURFACE BOX

543G 12 SPARE BREAK RODS

ACCESSORIES

540 SERIES PULL STATIONS

541S/D & 542S/D

541B BOX

541S/D & 542S/D

4 Square Box and Single Gang Mud Ring (by others)

Surface Mount Semi-flush Mount

The NATIONAL TIME Addressable Analog Photo-electric detector maintains consistent alarm detection over changing ambient conditions. In collaboration with the FACP, its intelligent self-adjusting drift compensation algorithm provides true alarm threshold levels above the detector’s ambient levels. The robust DigiCommTM communication protocol provides reliable and accurate information to be exchanged between the detector and the Fire Alarm Control Panel. This two-wire loop circuit carries both data and 17-28VDC supply. The detector’s address is set in its base providing a convenient and trouble free maintenance procedure. The detectors mount to a selection of base styles to accommodate installation requirements. Bases include 4” and 6” versions with optional sounder. The detectors are UL268 7th edition approved.

Tel: (248) 380-6264 • (800) 326-8456 • Fax: (248) 380-6268 • 28045 Oakland Oaks Court • Wixom, MI 48393 w w w . n a t s c o . n e t

Features:

• False Alarm Immunity

• Dirty Detector Sense

• Drift Compensation

• Class A, B or X Communication Wiring

• Superior DigiCommTM Digital Communi-cation Protocol

• LED Indicator

• Integrated NFPA 72 Detector Sensitivity Self Test

• U.L. Listed

DigiCommTM SMOKE

DETECTORS

Tel: (248) 380-6264 • Fax: (248) 380-6268 • 28045 Oakland Oaks Court • Wixom, MI 48393w w w . n a t s c o . n e t w w w . n a t s c o . n e t BULLETIN F-357 RevD

Specifications

Ordering Information

Part No. Description

DX900-PHOTO DigicommTM Photo Smoke Detector

DS900-PHOTO DigicommTM Photo Smoke Detector w/ Built-in Isolator

Voltage Range 17VDC to 28VDC DX900: 340uA DS900: 500uA 4mA (LED Active) 0-300 fpm 32 to 120 oF 0 to 95% RH non-condensing Class A, B or X (via the DigiCommTM Communication Loop) Flame-retardant White Polycarbonate 4”dia. x 1.41”

2.93 oz.

To DigiCommTM Detector Bases (see Bulletin F-360)

DigiCommTM Loop Power:

SUPERVISORY CURRENT:

ALARM CURRENT:

AIR VELOCITY:

OPERATING TEMPERATURE:

HUMIDITY:

Communication:

Finish:

Dimensions:

Net Wt.:

Mounting:

Both detectors are compatible with DS900 Series Bases ordered separately.

See Bulletin F-360 for DS900 base styles.

The NATIONAL TIME CXU Series is a universal ceiling and wall mount speaker or speaker/strobe combination designed for audio and voice communications. The speaker is high-fidelity speaker, tested to a wide frequency range of 315Hz to 5000Hz, exceeding the UL1480 requirements. The CXU Series offers both dependable evacuation signaling and visual alarms or a combination of both.

The CXU speaker/strobe offers tamperproof field selectable strobe options of 15, 30, 75, 115, 150, and 177 candela.

The strobe is synchronized directly from the NATSCO Fire Alarm Panels and NAC Panels. The unit can be mounted in a 4” square x 2-1/8” deep back box, an extension ring is not needed. The CXU Series provides a 25 or 70.7 VRMS speaker with field selectable power taps of 1/8W, 1/4W, 1/2W, 1W, 2W or 4W.

The included mounting plate incorporates the popular Super-Slide® feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing. The CXU also features the patented Checkmate® Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint.

Bezels are available in white or red. Bezel text options of Fire, Alert, or plain without text.

The CXU devices are listed to ANSI/UL 1480, ANSI/UL 1638.

Tel: (248) 380-6264 • (800) 326-8456 • Fax: (248) 380-6268 • 28045 Oakland Oaks Court • Wixom, MI 48393 w w w . n a t s c o . n e t

Features:

• Universal wall or ceiling mount

• Tamperproof field selectable candela options of 15, 30, 75, 115, 150, & 177

• Field selectable 1/8W, 1/4W, 1/2W, 1W, 2W, 4W

• High fidelity speaker frequency range 315- 5000Hz

• Speaker voltage 25 or 70.7 VRMS Field selectable

• Slide-on bracket eases supervision testing

• Instant Voltage Verification Ports

• Mounts to a standard 4” x 2-1/8” deep back box

CXU SERIES SPEAKER

AND SPEAKER/STROBES

Product Listings:

ANSI/UL 1480, ANSI/UL 1638

Product Compliance:

Americans with Disabilities Act (ADA)

NFPA 72; IBC/IFC/IRC; ISO 9001:2008

Tel: (248) 380-6264 • Fax: (248) 380-6268 • 28045 Oakland Oaks Court • Wixom, MI 48393w w w . n a t s c o . n e t w w w . n a t s c o . n e t BULLETIN F-632 RevB

ORDERING INFORMATION AND SPECIFICATIONS

Ordering Information

Label Color Part No. Description

Fire Bezel

Red SG-CXUF-SSZ Combination Speaker/Strobe, Synchronize, Universal Mount (wall/ceiling); Fire, Red;

SG-CXUF-SN Speaker Universal Mount (wall/ceiling); Fire, Red

White SG-CXUF-SSZ-WH Combination Speaker/Strobe, Synchronize, Universal Mount (wall/ceiling); Fire, White

SG-CXUF-SN-WH Speaker Universal MT (wall/ceiling); Fire, White

Alert Bezel

Red SG-CXUA-SSZ Combination Speaker/Strobe, Synchronize, Universal Mount (wall/ceiling); Alert, Red

SG-CXUA-SN Speaker Universal Mount (wall/ceiling); Alert, Red

White SG-CXUA-SSZ-WH Combination Speaker/Strobe, Synchronize, Universal Mount (wall/ceiling); Alert, White

SG-CXUA-SN-WH Speaker Universal Mount (wall/ceiling); Alert, White

Plain Bezel

Red SG-CXUP-SSZ Combination Speaker/Strobe, Synchronize, Universal Mount (wall/ceiling); Plain, Red

SG-CXUP-SN Speaker Universal Mount (wall/ceiling); Plain, Red

White SG-CXUP-SSZ-WH Combination Speaker/Strobe, Synchronize, Universal Mount (wall/ceiling); Plain, White

SG-CXUP-SN-WH Speaker Universal Mount (wall/ceiling); Plain, White

Strobe Current Ratings 24VDC (16-33 Volts)

Candela UL Max 24VDC

15 35 mA 28 mA

30 41 mA 34 mA

75 74 mA 55 mA

115 107 mA 76 mA

150 138 mA 98 mA

177 162 mA 117 mA

Speaker dBA @ 10 ft.

Input Watts 25 Volts 70.7 Volts

1/8 75 dBA 75 dBA

1/4 78 dBA 78 dBA

1/2 80 dBA 80 dBA

1 83 dBA 83 dBA

2 86 dBA 86 dBA

4 89 dBA 89 dBA

Specifications

The NATIONAL TIME addressable module family includes initiating input circuit modules and relay output modules. The Control I/O module combines the initiating input and the relay output on a single module. Single and a double input modules are available simplifying installation layouts. The inputs provide a Class A or B supervision to monitor dry contact initiating devices. The relay output provides a form “C” dry contact rated for 4 Amps. The DigiCommTM communication allows Class A, B or X wiring supervision and devices have a built-in isolator. The robust DigiCommTM communication protocol enables reliable and accurate information to be exchanged between modules and the Fire Alarm Control Panel.

Large terminals make field wiring easier. Switch settings can be viewed and changed without removing the device from the electrical box and are covered with a decorative face plate. All modules mount in a 4” square or 2 gang electrical box.

Tel: (248) 380-6264 • (800) 326-8456 • Fax: (248) 380-6268 • 28045 Oakland Oaks Court • Wixom, MI 48393 w w w . n a t s c o . n e t

Features:

• Addressable 2 Wire Initiating Circuit

• Supervised Class A or B Input

• 1 Form C Dry Contact

• Relay only and Input only versions available

• Built-in Isolator

• Class A, B or X Communication Wiring

• Superior DigiCommTM Digital Communication Protocol

• Large Terminals for easy termina-tions

• Front Access to Switch Settings

• LED Indicator

• U.L. Listed

DigiCommTM CONTROL Input/output MODULES

Tel: (248) 380-6264 • Fax: (248) 380-6268 • 28045 Oakland Oaks Court • Wixom, MI 48393w w w . n a t s c o . n e t w w w . n a t s c o . n e t BULLETIN F-354 RevE

Specifications

Ordering Information

Part No. Description

DS900-CTRL I/O DigiCommTM Control I/O Module

DS900-MONITOR DigiCommTM Dry Contact Monitor Module

DS900-MONITOR-DUAL DigiCommTM Dual Dry Contact Monitor Module

DS900-CTRL-RELAY DigiCommTM Control Relay Module with Form C Contact

32-120 oF 0-95% RH no condensation or icing 4.9”x 4.9”x 1.175” 4” sq. or 2 Gang Electrical Box (minimum depth of 2-1/8”) Housing: UL94 V-0 Polycarbonate

12-24AWG

Non-Supervised, Programmable Dry Contact 30VDC - 4A resistive; 240VAC - 4A resistive

Supervised power limited Class A or B 100 Ohms Max 47 K Ohms

Supervised power limited 500uA 900uA 3.2mA Class A, B or X (via DigiCommTM Communication Loop)

Product operating Temperature:

Humidity:

Dimensions:

Mounting:

Materials:

Wiring Size:

relay output- Contact rating:

initiating device circuit- Wiring styles:

line impedance:

End-of-line resistor:

Signal Line Circuit (SLC)- Supervisory current:

Switch-on Surge Current:

MAX. Alarm/operated current:

Communication supervision:

The Dual Monitor module uses separate SLC addresses for each input.

DS900-CTRL-RELAY DS900-CTRL I/O DS900-MONITOR DS900-MONITOR-DUAL

Back view

______ Clarification

Attn: Fritz Wahlfield III, Fritz Wahlfield Construction (CM) ______ Direction

______ Approval

Company: __________________________________________________ ______ Alternate

Contact: ___________________________________________________ ______ Other

Email: _____________________________________________________

Phone No:__________________________________________________

Reference Drawing No: __________________________ Detail No: ___________ Spec. Section: ___________

Request Information:

By: _______________________________ Date: ________________

AE Recommendation:

By: _______________________________ Date: ________________

See AE Recommendation

AB 10.9.26

10/09/2026

XEPS Security ddrake@epssecurity.com David Drake

517-507-6895

2.2 (A)

Request to add Honeywell Notifier into list of approved Manufacturers. Same features as Honeywell XLS, just re-branded.

Honeywell Notifier is acceptable for the fire alarm systems to be provided in these projects.

10/14/2026

______ Clarification

Attn: Fritz Wahlfield III, Fritz Wahlfield Construction (CM) ______ Direction

______ Approval

Company: __________________________________________________ ______ Alternate

Contact: ___________________________________________________ ______ Other

Email: _____________________________________________________

Phone No:__________________________________________________

Reference Drawing No: __________________________ Detail No: ___________ Spec. Section: ___________

Request Information:

By: _______________________________ Date: ________________

AE Recommendation:

By: _______________________________ Date: ________________

See AE Recommendation

AB 10.15.26

Universal Fire Protection

Tom Danner Tdanner@Universalpiping.com

248-602-5013

Is Siemens an acceptable fire alarm manufacturer to use? It is not listed in the manufacturer list.

10/14/2026

10/16/2026

SIEMENS MAY SUBMIT AS AN ACCEPTABLE VOLUNTARY ALTERNATE FOR THIS PROJECT