Drawings Packet.pdf
PDF 5 MB Posted
- Attached to
- RFI Added SOLICITATION: 9930--supply flat bronze markers for Worldwide Distribution Base + 4 contract
- Solicitation number
- 36C78621R0027
About this file
This is a pre-solicitation notice for a requirements contract to supply flat bronze markers for worldwide distribution. The National Cemetery Administration is seeking offers for a base contract plus four delivery orders to manufacture, inscribe, package, and ship four types of flat bronze markers. Offerors must meet specifications, drawings, terms and conditions outlined in the solicitation. Proposals will be evaluated on past performance, technical approach, and price, in that order of importance, with an award to the responsible offeror representing the best value. The contract will have a 20-day delivery requirement after order issuance. Questions are due by May 13, 2021 and responses to the solicitation are due by May 21, 2021.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 36C78621R0027 0001.pdf | ||
| 36C78621R0027 RFP for Flat Bronze Marker Worldwide.pdf | ||
| 36C78621R0027_1.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Date
Project No.
DrawnCheckedMarker Type
Project TitleDrawing Title
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
DRAWING NO.
Sheet Of
Approved: Director, Memorial Programs Service
Approved: Chief of Operations, Memorial Programs Service
A-B1
1 1
Signed
Signed
DO NOT SCALE THIS DRAWING
Location
Digital File
A-B1.DWG 24" x 36" SHEET
PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY
GOVERNMENT HEADSTONES
AND MARKERS
FLAT BRONZE MARKER
-- PMG
SEPTEMBER 23, 2019
B1
DateRevisions
ApprovedCheckedDrawn
AE Contractor
CSJ CSJIRN
PLANATE MANAGEMENT GROUP
1800 Diagonal Road, Suite 600, 12" X 24"
03-01-0700
SUPERSEDES DRAWING MFB-1A
DATED 5-16-1997
AE Contractor
Alexandria, VA 22314
101-7J7031
09-23-19A
SUPERSEDES DRAWING REV00 DATED 03-01-07,
INSCRIPTION LAYOUT CENTERING AND
TOLERANCE
4 LINE INSCRIPTION PLACEMENT AND DETAIL
ITEM L4
ITEM L2
ITEM L4
ITEM L4 ITEM L4
EMB
5 LINE INSCRIPTION PLACEMENT AND DETAIL
ITEM L4
ITEM L2
ITEM L4
ITEM L4 ITEM L4
EMB
ITEM L4
REAR VIEW SHOWING BOSSES
6 LINE DEPENDENT INSCRIPTION PLACEMENT
AND DETAIL WITH EMBLEM
ITEM L2
ITEM L4 ITEM L4EMB
ITEM L4
ITEM L4
ITEM L4
3 LINE INSCRIPTION PLACEMENT AND DETAIL
SEE PLAN LNC & E-1 THROUGH 3 FOR INSCRIPTION SIZES
6 LINE INSCRIPTION PLACEMENT AND DETAIL
WITHOUT EMBLEM OF BELIEF
ITEM L2
ITEM L4
ITEM L4 ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L2
ITEM L4
ITEM L4 ITEM L4
EMB
4 LINE INSCRIPTION PLACEMENT AND DETAIL
6 LINE INSCRIPTION PLACEMENT AND DETAIL WITH 2 EMBLEMS
(TWO VETERANS OR A VETERAN AND A DEPENDENT)
ITEM L2
ITEM L4 ITEM L4
ITEM L4
ITEM L4
ITEM L2
ITEM L4
ITEM L4 ITEM L4
EMB
ITEM L4
EMB
ITEM L2
ITEM L4
EMB
ITEM L4
6 LINE INSCRIPTION PLACEMENT
AND DETAIL WITH EMBLEM
7 LINE INSCRIPTION PLACEMENT AND DETAIL
ITEM L2
ITEM L4
ITEM L2
ITEM L4
ITEM L4 ITEM L4
EMB
ITEM L4
ITEM L4ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
STANDARD INSCRIPTION
SCALE: 3" = 1'-0"
1'-0"
ITEM L6
ITEM L6ITEM L6
ITEM L6ITEM L6
ITEM L6
9"
2'-0"
"6
ITEM L6
ITEM L4
ITEM L6
ITEM L6
MEMORIAL INSCRIPTION
SCALE: 3" = 1'-0"
TYPICAL FACE OF MARKER
SCALE: 6" = 1'-0"
CASTING PATTERN DETAIL
SCALE: NTS
WOVEN LOOP
FINISH COATING
POLISHED BRASS
RANDOM WOVEN LOOP
CAST-IN PATTERN EDGE,
FINISHED SURFACE PER
CONTRACT SPECIFICATIONS
SIDE VIEW
5/16" TYP.
2'-0"
S E
E
P
L A
C E
M E
N T
D
E T
A I L
SEE WOVEN LOOP DETAIL
1/2" TYP.
T
Y P
M
I N
LIMITS OF
INSCRIPTION AREA
(CONTRACTOR- DO
NOT INSCRIBE THIS
LINE - FOR REF.
ONLY)
0.34"
ROD, BRASS, THREADED
3/8"-16 NC-2 X 6" LG. (4 REQUIRED)
WASHER, BRASS, FLAT
REINFORCED 2" SQUARE X
SIXTEEN GAUGE TK. (4 REQUIRED)
NUT, BRASS, HEX, 3/8"-16 NC-2
(4 REQUIRED)
6"
0.09" LETTERING
0.19"
THREADED
BOSS 0.75 O.D.
0.56"
0.41"
0.25"
0.047"
R
GENERAL NOTES:
1. ITEM NUMBER IN INSCRIPTION BLOCK REFER TO SIZE AND EMBLEM OF
BELIEF SHOWN ON DRAWING A-LNC & E-1, A-LNC & E-2, A-LNC & E-3
DATED 6-5-03.
2. EMBLEM BELIEF IS OPTIONAL.
3. CASTING - MARKERS SHALL BE FREE OF BENDS OF WARPING
EXCEEDING 1/16". CASTING SHALL BE FREE OF WRINKLES.
4. LETTERS, NUMERALS AND EMBLEMS OF BELIEF - LETTERS, NUMERALS
AND EMBLEMS OF BELIEF SHALL BE CLEAR AND SHARPLY CAST, FREE
OF SCRATCHES, PROPERLY CENTERED AND ALIGNED AS SHOWN.
5. COATING - THE PROTECTIVE COATING SHALL BE IN UNIFORM IN COLOR
AND CLEAR AND FREE OF BARE SPOTS, SCRATCHES, EMBEDDED
FOREIGN MATTER AND BLISTERING.
6. RODS AND BOSSES - FOUR (4) 5 OR 6 INCH BRASS RODS WITH NUTS
AND WASHERS SHALL BE FURNISHED WITH EACH MARKER. RODS
SHALL BE FULLY THREADED, STANDARD MACHINE THREAD 3/8"-16 NC-2
TO FIT TAPPED BOSSES AS SHOWN ABOVE. WASHERS SHALL BE IN 2
INCHES SQUARE.
7. REVERSE SIDE - SURFACE TEXTURE OF REVERSE SIDE OF MARKER
SHALL BE NORMAL AS-CAST SAND TEXTURE (FOUNDRY SAND
TEXTURE).
C
L
C
L
8. THE INSCRIPTION LAYOUT WILL BE CENTERED OFF OF THE CENTERLINE
AS MARKED IN SCENARIOS ABOVE. THE TOLERANCE FOR CENTERING
THE LINES OF INSCRIPTION IS LESS THAN OR EQUAL TO 3/16" ON EACH
SIDE OF THE CENTERLINE.
A B
C D
E F
A B
C D
E F
G
G
WOVEN LOOP EDGING WOVEN
LOOP
EDGING
AutoCAD SHX Text U
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text V
AutoCAD SHX Text E
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text A
AutoCAD SHX Text N
AutoCAD SHX Text S
AutoCAD SHX Text A
AutoCAD SHX Text F
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text N
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text
ATIONAL
AutoCAD SHX Text
EMETERY
AutoCAD SHX Text
DMINISTRATION
Date
Project No.
DrawnCheckedMarker Type
Project TitleDrawing Title
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
DRAWING NO.
Sheet Of
Approved: Director, Memorial Programs Service
Approved: Chief of Operations, Memorial Programs Service
A-B6
1 1
Signed
Signed
DO NOT SCALE THIS DRAWING
Location
Digital File
A-B6.DWG 24" x 36" SHEET
PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY
GOVERNMENT HEADSTONES
AND MARKERS
FLAT BRONZE MARKER
-- PMG
SEPTEMBER 23, 2019
B6
DateRevisions
ApprovedCheckedDrawn
AE Contractor
CSJ CSJIRN
PLANATE MANAGEMENT GROUP
1800 Diagonal Road, Suite 600, MEDAL OF HONOR
03-01-0700
SUPERSEDES DRAWING MFB-1A
DATED 5-16-1997
AE Contractor
Alexandria, VA 22314
101-7J7031
09-23-19A
SUPERSEDES DRAWING REV00 DATED 03-01-07,
INSCRIPTION LAYOUT CENTERING AND
TOLERANCE
REAR VIEW SHOWING BOSSES
5 LINE INSCRIPTION PLACEMENT AND DETAIL WITHOUT EMBLEM OF BELIEF
SEE DWG A-B1 FOR OTHER INSCRIPTION SCENARIOS
ITEM L2
ITEM L4
ITEM L4
6 LINE INSCRIPTION PLACEMENT AND DETAIL
MEDAL OF HONOR WITH EMBLEM OF BELIEF
ITEM L2
ITEM L4
EMB
STANDARD INSCRIPTION
SCALE: 3" = 1'-0"
1'-0"
ITEM L6ITEM L6
9"
2'-0"
TYPICAL FACE OF STONE
SCALE: 6" = 1'-0"
CASTING PATTERN DETAIL
SCALE: NTS
WOVEN LOOP
FINISH COATING
POLISHED BRASS
RANDOM WOVEN LOOP
CAST-IN PATTERN EDGE,
FINISHED SURFACE PER
CONTRACT SPECIFICATIONS
SIDE VIEW
5/16" TYP.
2'-0"
S E
E
P
L A
C E
M E
N T
D
E T
A I L
SEE WOVEN LOOP DETAIL
1/2" TYP.
T
Y P
M
I N
LIMITS OF
INSCRIPTION AREA
(CONTRACTOR- DO
NOT INSCRIBE THIS
LINE - FOR REF.
ONLY)
0.34"
ROD, BRASS, THREADED
3/8"-16 NC-2 X 6" LG. (4 REQUIRED)
WASHER, BRASS, FLAT
REINFORCED 2" SQUARE X
SIXTEEN GAUGE TK. (4 REQUIRED)
NUT, BRASS, HEX, 3/8"-16 NC-2
(4 REQUIRED)
6"
0.09" LETTERING
0.19"
THREADED
BOSS 0.75 O.D.
0.56"
0.41"
0.25"
0.047"
R
C
L
C
L
12" X 24"
GENERAL NOTES:
1. ITEM NUMBER IN INSCRIPTION BLOCK REFER TO SIZE AND EMBLEM OF
BELIEF SHOWN ON DRAWING A-LNC & E-1, A-LNC & E-2, A-LNC & E-3
DATED 6-5-03.
2. EMBLEM BELIEF IS OPTIONAL.
3. CASTING - MARKERS SHALL BE FREE OF BENDS OF WARPING
EXCEEDING 1/16". CASTING SHALL BE FREE OF WRINKLES.
4. LETTERS, NUMERALS AND EMBLEMS OF BELIEF - LETTERS, NUMERALS
AND EMBLEMS OF BELIEF SHALL BE CLEAR AND SHARPLY CAST, FREE
OF SCRATCHES, PROPERLY CENTERED AND ALIGNED AS SHOWN.
5. COATING - THE PROTECTIVE COATING SHALL BE IN UNIFORM IN COLOR
AND CLEAR AND FREE OF BARE SPOTS, SCRATCHES, EMBEDDED
FOREIGN MATTER AND BLISTERING.
6. RODS AND BOSSES - FOUR (4) 5 OR 6 INCH BRASS RODS WITH NUTS
AND WASHERS SHALL BE FURNISHED WITH EACH MARKER. RODS
SHALL BE FULLY THREADED, STANDARD MACHINE THREAD 3/8"-16 NC-2
TO FIT TAPPED BOSSES AS SHOWN ABOVE. WASHERS SHALL BE IN 2
INCHES SQUARE.
7. REVERSE SIDE - SURFACE TEXTURE OF REVERSE SIDE OF MARKER
SHALL BE NORMAL AS-CAST SAND TEXTURE (FOUNDRY SAND
TEXTURE).
8. THE INSCRIPTION LAYOUT WILL BE CENTERED OFF OF THE CENTERLINE
AS MARKED IN SCENARIOS ABOVE. THE TOLERANCE FOR CENTERING
THE LINES OF INSCRIPTION IS LESS THAN OR EQUAL TO 3/16" ON EACH
SIDE OF THE CENTERLINE.
A B
C D
E F
A B
C D
E F
G
G
1 2
BOS
MOH
EMBLEM
WOVEN LOOP EDGING WOVEN
LOOP
EDGING
BOS
MOH
EMBLEM
BOS
MOH
EMBLEM
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4ITEM L4
GRAPHIC SCALE 6" = 1'-0"
4321.510.50
AutoCAD SHX Text U
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text V
AutoCAD SHX Text E
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text A
AutoCAD SHX Text N
AutoCAD SHX Text S
AutoCAD SHX Text A
AutoCAD SHX Text F
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text N
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text
ATIONAL
AutoCAD SHX Text
EMETERY
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
A B
C D
E F
A B
C D
E F
G
G
DO NOT SCALE THIS DRAWING
PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY
EMBLEM TABLE - NUMERICAL
EMBLEM NAME
NUMBER
EMBLEM
LOCATION
SHEET
CHRISTIAN
2 BUDDHIST
3 JUDAISM
4 PRESBYTERIAN CROSS
5 RUSSIAN ORTHODOX CROSS
6 LUTHERAN CROSS
7 EPISCOPAL CROSS
8 UNITARIAN CHURCH FLAMING CHALICE
9 UNITED METHODIST CHURCH
10 AARONIC ORDER CHURCH
11 MORMON - ANGEL MORONI
12 NATIVE AMERICAN CHURCH OF AMERICA
13 SERBIAN ORTHODOX
14 GREEK CROSS
15 BAHAI - 9 POINT STAR
16 ATHEIST
17 MUSLIM-CRESCENT AND STAR
18 HINDU
19 KONKO-KYO FAITH
20 COMMUNITY OF CHRIST
SUFISM REORIENTED
22 TENRIKYO CHURCH
23 SEICHO-NO-IE
24 THE CHURCH OF THE WORLD MESSIANITY (IZUNOME)
25 UNITED CHURCH OF RELIGIOUS SCIENCE
26 CHRISTIAN REFORMED CHURCH
27 UNITED MORAVIAN CHURCH
28 ECKANKAR
29 CHRISTIAN CHURCH
30 CHRISTIAN & MISSIONARY ALLIANCE
31 UNITED CHURCH OF CHRIST
32 HUMANIST EMBLEM OF SPIRIT
33 PRESBYTERIAN CHURCH (USA)
34 IZUMO TAISHAKYO MISSION OF HAWAII
35 SOKA GAKKAI INTERNATIONAL - USA
36 SIKH (KHANDA)
37 WICCA (PENTACLE)
38 LUTHERAN CHURCH MISSOURI SYNOD
39 NEW APOSTOLIC CHURCH
40 SEVENTH DAY ADVENTIST
CELTIC CROSS
42 ARMENIAN CROSS
43 FAROHAR
44 MESSIANIC JEWISH
45 KOHEN HANDS
46 CATHOLIC CELTIC CROSS
47 FIRST CHURCH OF CHRIST, SCIENTIST
48 MEDICINE WHEEL
49 INFINITY
50 CONFEDERATE (SOUTHERN CROSS OF HONOR)
51 LUTHER ROSE
52 LANDING EAGLE
53 FOUR DIRECTIONS
54 CHURCH OF NAZARENE
55 HAMMER OF THOR
56 UNIFICATION CHURCH
57 SANDHILL CRANE
EMBLEM TABLE - ALPHABETICAL
LOCATION
SHEET
AARONIC ORDER CHURCH
BAHAI - 9 POINT STAR
ATHEIST
COMMUNITY OF CHRIST
CHRISTIAN REFORMED CHURCH
CHRISTIAN CHURCH
CHRISTIAN & MISSIONARY ALLIANCE
CELTIC CROSS
CATHOLIC CELTIC CROSS
CONFEDERATE (SOUTHERN CROSS OF HONOR)
CHURCH OF NAZARENE
NUMBER
EMBLEM
CHRISTIAN1
ARMENIAN CROSS
BUDDHIST2
MORMON - ANGEL MORONI
NATIVE AMERICAN CHURCH OF AMERICA
SERBIAN ORTHODOX
GREEK CROSS
MUSLIM-CRESCENT AND STAR
HINDU
KONKO-KYO FAITH
SUFISM REORIENTED
TENRIKYO CHURCH
SEICHO-NO-IE
UNITED CHURCH OF RELIGIOUS SCIENCE
UNITED MORAVIAN CHURCH
ECKANKAR
UNITED CHURCH OF CHRIST
HUMANIST EMBLEM OF SPIRIT
PRESBYTERIAN CHURCH (USA)
IZUMO TAISHAKYO MISSION OF HAWAII
SOKA GAKKAI INTERNATIONAL - USA
SIKH (KHANDA)
WICCA (PENTACLE)
LUTHERAN CHURCH MISSOURI SYNOD
NEW APOSTOLIC CHURCH
SEVENTH DAY ADVENTIST
FAROHAR
MESSIANIC JEWISH
KOHEN HANDS
FIRST CHURCH OF CHRIST, SCIENTIST
MEDICINE WHEEL
INFINITY
LUTHER ROSE
LANDING EAGLE
FOUR DIRECTIONS
GUARDIAN ANGEL
UNIFICATION CHURCH
ISLAMIC 5 POINTED STAR
JUDAISM
PRESBYTERIAN CROSS
RUSSIAN ORTHODOX CROSS
LUTHERAN CROSS
EPISCOPAL CROSS
UNITARIAN CHURCH FLAMING CHALICE
UNITED METHODIST CHURCH
MEDAL MOH US AIR FORCE
MEDAL MOH US ARMY
MEDAL MOH US NAVY, US MARINE CORPS, AND US COAST GUARD
61 SHINTO
SANDHILL CRANE57
CHURCH OF GOD
POMEGRANATE
MESSIANIC
POMEGRANATE59
MESSIANIC60
CHURCH OF GOD58
66 WISCONSIN EVANGELICAL LUTHERAN SYNOD
SHINTO61
62 SACRED HEART
63 AFRICAN ANCESTRAL TRADITIONALIST
64 MALTESE CROSS
65 DRUID
SACRED HEART62
AFRICAN ANCESTRAL TRADITIONALIST63
MALTESE CROSS64
DRUID65
DESCRIPTION
NUMBER
REVISION
DATE
98 ISLAMIC 5 POINTED STAR
67 POLISH NATIONAL CATHOLIC CHURCH
WISCONSIN EVANGELICAL LUTHERAN SYNOD
POLISH NATIONAL CATHOLIC CHURCH67
MOH US AIR FORCE
MOH US ARMY
MOH US NAVY, US MARINE CORPS, AND US COAST GUARD
MEDAL
MEDAL
MEDAL
THE CHURCH OF THE WORLD MESSIANITY (IZUNOME)24
EMBLEM NAME
A 03-01-07
B 03-01-07
C
D
06-27-14
07-02-15
E 01-18-17
MOVED INCISED STONE DETAIL FROM SHEET 1, REARRANGED
EMBLEMS FROM SHEET 1 OF 3. ADDED EMBLEMS 33, 34, 35 & 36
ADDED EMBLEMS 37 THRU 57 - REARRANGED ALL EMBLEMS TO FIT
FULL SCALE SHEET LAYOUT, REVISED GENERAL NOTES, ADDED
INDEX CHARTS
ADDED EMBLEMS 58 THRU 60. UPDATED EMBLEM TABLES
REVISED EMBLEM 43. ADDED EMBLEM 61.
ADDED EMBLEMS 62, 63, 64 AND 65.
F 01-23-17
G 11-24-17ADDED EMBLEMS 66 AND 67
H 12-09-17
ROTATED EMBLEM 63. INSERTED AE CONTRACTOR LOGO AND
DETAILS. MOVE EMBLEM TABLE AND REVISION BLOCK INTO COVER
PAGE.
ADDED NOTES TO GENERAL NOTES NUMBER 1. REPLACED NOTES
TO GENERAL NOTES NUMBERS 2 AND 4. REVISED AE
CONTRACTOR DETAILS.
REVISION TABLE
I 12-23-17
REVISED DIMENSION ON RAISED BRONZE AND INCISED STONE ON
SHEET 1.
69 HEART
68 GUARDIAN ANGEL
70 SHEPHERD AND FLAG
SHEPHERD AND FLAG70
HEART69
HAMMER OF THOR55
J 06-28-18
ADDED EMBLEMS 68, 69 AND 70.
K 09-04-19
ADDED EMBLEMS 71, 72, 73 AND 74.
FAITH AND PRAYER
EVANGELICAL LUTHERAN CHURCH72
AFRICAN METHODIST EPISCOPAL (AME)
UNIVERSALIST CROSS
AFRICAN METHODIST EPISCOPAL (AME)71
EVANGELICAL LUTHERAN CHURCH72
FAITH AND PRAYER74
UNIVERSALIST CROSS
L 04-13-21
ADDED EMBLEM 75. REVISED AE CONTRACTOR DETAILS
75 ICHTHYS
ICHTHYS
AutoCAD SHX Text
NATIONAL CEMETERY ADMINISTRATION
AutoCAD SHX Text
GOVERNMENT HEADSTONES AND MARKERS
AutoCAD SHX Text U
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text V
AutoCAD SHX Text E
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text A
AutoCAD SHX Text N
AutoCAD SHX Text S
AutoCAD SHX Text A
AutoCAD SHX Text F
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text R
S
RAISED BRONZE
SCALE:1"=1"
INCISED STONE
SCALE:1"=1"
E
E
JUDAISM
(3)
SECTION E-E
SEE INSCRIPTION
TABLE
F
F
G
G
H
H
SEE INSCRIPTION
TABLE
SEE INSCRIPTION
TABLE
SEE INSCRIPTION
TABLE
CHRISTIAN SECTION F-F BUDDHIST
(2)
SECTION G-G CONFEDERATE (SOUTHERN CROSS OF HONOR)
(50)
SECTION H-H
HEBREW
(3)
BUDDHIST
(2)
SECTION A-A SECTION C-CCHRISTIAN
(1)
CONFEDERATE
(SOUTHERN CROSS OF HONOR)SECTION B-B SECTION D-D
(50)
A
A B
B C
C
D
D
1 3/8"
3/32"
1/64"
1/8" (4/32")
3/64"
1/8" (4/32") 1/8" (4/32")
Date
Project No.
DrawnCheckedMarker Type
Project TitleDrawing Title
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
A B
C D
E F
DRAWING NO.
Sheet Of
A B
C D
E F
Approved: Director, Memorial Programs Service
Approved: Chief of Operations, Memorial Programs Service
A-EM-1
1 5
Signed
Signed
G
G
DO NOT SCALE THIS DRAWING
Location
Digital File
A-EM-1.DWG 24" x 36" SHEET
PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY
GOVERNMENT HEADSTONES
AND MARKERS
EMBLEMS
KEE/KS
MLT
SYSTEMS
DECEMBER 23, 2017
ALL
GENERAL NOTES:
1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER
AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO
POINT MEASUREMENT AND ALL OTHER AREAS SHALL BE IN EQUAL PROPORTION.
2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.
3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN AS FINISHED SURFACE.
4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO DETAILED AS TO MAKE IT IMPRACTICAL
TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.
DateRevisions DateRevisions
ApprovedCheckedDrawn
AE Contractor
IRN CSJJP/JN/IRN
06-05-03
SUPERSEDES DRAWING ID-4
SHEET 2 OF 2 DATED 12-2-99
03-01-07
A
MOVED INCISED STONE DETAIL FROM SHT 1,
REARRANGED EMBLEMS FROM SHEET 1 OF 3
07-01-13
B
REARRANGED ALL EMBLEMS TO FIT FULL SCALE
SHEET LAYOUT. REVISED GENERAL NOTES,
ADDED INDEX CHARTS
01-23-17
F
INSERTED AE CONTRACTOR LOGO AND DETAILS.
MOVE EMBLEM TABLE AND REVISION BLOCK INTO
COVER PAGE.
42 310
1" = 1" GRAPHIC SCALE
12-09-17H
ADD NOTES TO GENERAL NOTES NUMBER 1.
REPLACED NOTES TO GENERAL NOTES NUMBERS
2 AND 4. REVISED AE CONTRACTOR DETAILS.
PLANATE MANAGEMENT GROUP
3631 Ransom Place, Alexandria, VA 22306
12-23-17I
REVISED DIMENSION ON RAISED BRONZE AND
INCISED STONE ON SHEET 1.
AutoCAD SHX Text U
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text V
AutoCAD SHX Text E
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text A
AutoCAD SHX Text N
AutoCAD SHX Text S
AutoCAD SHX Text A
AutoCAD SHX Text F
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text N
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text
ATIONAL
AutoCAD SHX Text
EMETERY
(4)
PRESBYTERIAN CROSS
(5)
RUSSIAN ORTHODOX CROSS
(3)
JUDAISM
(2)
CHRISTIAN BUDDHIST
(1)
(10)
AARONIC ORDER CHURCH
(6)
LUTHERAN CROSS
(7)
EPISCOPAL CROSS
(8)
UNITARIAN CHURCH FLAMING
(9)
UNITED METHODIST CHURCH
CHALICE
(11)
MORMON-ANGEL MORONI
(12)
NATIVE AMERICAN CHURCH
(13)
SERBIAN ORTHODOX
(14)
GREEK CROSS
(15)
BAHAI-9 POINT STAR
OF AMERICA
(16)
ATHEIST
(17)
MUSLIM-CRESCENT AND STAR
(18)
HINDU
(19)
KONKO-KYO FAITH
(20)
COMMUNITY OF CHRIST
Date
Project No.
DrawnCheckedMarker Type
Project TitleDrawing Title
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
A B
C D
E F
DRAWING NO.
Sheet Of
A B
C D
E F
Approved: Director, Memorial Programs Service
Approved: Chief of Operations, Memorial Programs Service
A-EM-2
2 5
Signed
Signed
G
G
DO NOT SCALE THIS DRAWING
Location
Digital File
A-EM-2.DWG 24" x 36" SHEET
PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY
GOVERNMENT HEADSTONES
AND MARKERS
EMBLEMS
KEE/KS
MLT
SYSTEMSALL
DateRevisions DateRevisions
ApprovedCheckedDrawn
AE Contractor
IRN CSJJP/JN/IRN
06-05-03
SUPERSEDES DRAWING ID-4
SHEET 2 OF 2 DATED 12-2-99
07-01-13
B
REARRANGED ALL EMBLEMS TO FIT FULL SCALE
SHEET LAYOUT. REVISED GENERAL NOTES,
ADDED INDEX CHARTS
01-23-17
F
INSERTED AE CONTRACTOR LOGO AND DETAILS.
ADDED REVISION BLOCK IN COVER PAGE.
42 310
1" = 1" GRAPHIC SCALE
12-09-17H
ADD NOTES TO GENERAL NOTES NUMBER 1.
REPLACED NOTES TO GENERAL NOTES NUMBERS
2 AND 4. REVISED AE CONTRACTOR DETAILS.
DECEMBER 23, 2017
GENERAL NOTES:
1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER
AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO
POINT MEASUREMENT AND ALL OTHER AREAS SHALL BE IN EQUAL PROPORTION.
2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.
3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN AS FINISHED SURFACE.
4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO DETAILED AS TO MAKE IT IMPRACTICAL
TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.
PLANATE MANAGEMENT GROUP
3631 Ransom Place, Alexandria, VA 22306
AutoCAD SHX Text U
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text V
AutoCAD SHX Text E
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text A
AutoCAD SHX Text N
AutoCAD SHX Text S
AutoCAD SHX Text A
AutoCAD SHX Text F
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text N
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text
ATIONAL
AutoCAD SHX Text
EMETERY
(22)
TENRIKYO CHURCH
(23)
SEICHO-NO-IE
(24)
THE CHURCH OF WORLD MESSIANITY
(21)
SUFISM REORIENTED
(IZUNOME)
(25)
UNITED CHURCH OF RELIGIOUS
SCIENCE
(28)
ECKANKAR
(29)
CHRISTIAN CHURCH
(30)
CHRISTIAN & MISSIONARY ALLIANCE
(26)
CHRISTIAN REFORMED CHURCH
(27)
UNITED MORAVIAN CHURCH
(31)
UNITED CHURCH OF CHRIST
(32)
HUMANIST EMBLEM OF SPIRIT
(33)
PRESBYTERIAN CHURCH
(USA)
(34)
IZUMO TAISHAKYO MISSION
OF HAWAII
(35)
SOKA GAKKAI INTERNATIONAL -
USA
(36)
SIKH
(KHANDA)
(37)
WICCA
(PENTACLE)
(40)
SEVENTH DAY ADVENTIST
(39)
NEW APOSTOLIC CHURCH
(38)
LUTHERAN CHURCH MISSOURI SYNOD
Date
Project No.
DrawnCheckedMarker Type
Project TitleDrawing Title
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
A B
C D
E F
DRAWING NO.
Sheet Of
A B
C D
E F
Approved: Director, Memorial Programs Service
Approved: Chief of Operations, Memorial Programs Service
A-EM-3
3 5
Signed
Signed
G
G
DO NOT SCALE THIS DRAWING
Location
Digital File
A-EM-3.DWG 24" x 36" SHEET
PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY
GOVERNMENT HEADSTONES
AND MARKERS
EMBLEMS
KEE/KS
MLT
SYSTEMSALL
DateRevisions DateRevisions
ApprovedCheckedDrawn
AE Contractor
IRN CSJJP/JN/IRN
A 03-01-07
B 07-01-13
ADDED EMBLEMS 33, 34, 35 & 36
ADDED EMBLEMS 37 THRU 57 - REARRANGED ALL
EMBLEMS TO FIT FULL SCALE SHEET LAYOUT,
REVISED GENERAL NOTES, ADDED INDEX CHARTS
06-05-03---
SUPERSEDES DRAWING ID-4
SHEET 2 OF 2 DATED 12-2-99
01-23-17F
INSERTED AE CONTRACTOR LOGO AND DETAILS.
ADDED REVISION BLOCK IN COVER PAGE.
42 310
1" = 1" GRAPHIC SCALE
12-09-17H
ADD NOTES TO GENERAL NOTES NUMBER 1.
REPLACED NOTES TO GENERAL NOTES NUMBERS
2 AND 4. REVISED AE CONTRACTOR DETAILS.
DECEMBER 23, 2017
GENERAL NOTES:
1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER
AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO
POINT MEASUREMENT AND ALL OTHER AREAS SHALL BE IN EQUAL PROPORTION.
2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.
3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN AS FINISHED SURFACE.
4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO DETAILED AS TO MAKE IT IMPRACTICAL
TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.
PLANATE MANAGEMENT GROUP
3631 Ransom Place, Alexandria, VA 22306
AutoCAD SHX Text U
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text V
AutoCAD SHX Text E
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text A
AutoCAD SHX Text N
AutoCAD SHX Text S
AutoCAD SHX Text A
AutoCAD SHX Text F
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text N
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text
ATIONAL
AutoCAD SHX Text
EMETERY
(45)
KOHEN HANDS
(44)
MESSIANIC JEWISH
(42)
ARMENIAN CROSS
(41)
CELTIC CROSS
(43)
FAROHAR
(50)
CONFEDERATE
(49)
INFINITY
(48)
MEDICINE WHEEL
(47)
FIRST CHURCH OF CHRIST, SCIENTIST
(46)
CATHOLIC CELTIC CROSS
(SOUTHERN CROSS OF HONOR)
(53)
FOUR DIRECTIONS
(52)
LANDING EAGLE
(51)
LUTHER ROSE
(54)
CHURCH OF NAZARENE
(55)
HAMMER OF THOR
(56)
UNIFICATION CHURCH
(57)
SANDHILL CRANE
(58)
CHURCH OF GOD
(59)
POMEGRANATE
(60)
MESSIANIC
Date
Project No.
DrawnCheckedMarker Type
Project TitleDrawing Title
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
A B
C D
E F
DRAWING NO.
Sheet Of
A B
C D
E F
Approved: Director, Memorial Programs Service
Approved: Chief of Operations, Memorial Programs Service
A-EM-4
4 5
Signed
Signed
G
G
DO NOT SCALE THIS DRAWING
Location
Digital File
A-EM-4.DWG 24" x 36" SHEET
PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY
GOVERNMENT HEADSTONES
AND MARKERS
EMBLEMS
KEE/KS
MLT
SYSTEMSALL
DateRevisions DateRevisions
ApprovedCheckedDrawn
AE Contractor
IRN CSJJP/JN/IRN
C 06-27-14
D 07-02-15
ADDED EMBLEMS 58 THRU 60.
REVISE EMBLEM 43.
06-05-03---
SUPERSEDES DRAWING ID-4
SHEET 2 OF 2 DATED 12-2-99
B 07-01-13
ADDED EMBLEMS 37 THRU 57. REARRANGED ALL
EMBLEMS TO FIT FULL SCALE SHEET LAYOUT.
REVISED GENERAL NOTES, ADDED INDEX CHARTS
01-23-17
F
INSERTED AE CONTRACTOR LOGO AND DETAILS.
ADDED REVISION BLOCK IN COVER PAGE.
42 310
1" = 1" GRAPHIC SCALE
12-09-17H
ADD NOTES TO GENERAL NOTES NUMBER 1.
REPLACED NOTES TO GENERAL NOTES NUMBERS
2 AND 4. REVISED AE CONTRACTOR DETAILS.
DECEMBER 23, 2017
GENERAL NOTES:
1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER
AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO
POINT MEASUREMENT AND ALL OTHER AREAS SHALL BE IN EQUAL PROPORTION.
2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.
3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN AS FINISHED SURFACE.
4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO DETAILED AS TO MAKE IT IMPRACTICAL
TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.
PLANATE MANAGEMENT GROUP
3631 Ransom Place, Alexandria, VA 22306
AutoCAD SHX Text U
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text V
AutoCAD SHX Text E
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text A
AutoCAD SHX Text N
AutoCAD SHX Text S
AutoCAD SHX Text A
AutoCAD SHX Text F
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text N
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text
ATIONAL
AutoCAD SHX Text
EMETERY
(61)
SHINTO
(62)
SACRED HEART
(63)
AFRICAN ANCESTRAL TRADITIONALIST
(64)
MALTESE CROSS
(65)
DRUID
(67)
POLISH NATIONAL CATHOLIC CHURCH
(66)
WISCONSIN EVANGELICAL LUTHERAN SYNOD
(68)
GUARDIAN ANGEL
(69)
HEART
(70)
SHEPHERD AND FLAG
(71)
AFRICAN METHODIST EPISCOPAL (AME)
(74)
FAITH AND PRAYER
(72)
EVANGELICAL LUTHERAN CHURCH
(73)
UNIVERSALIST CROSS ICHTHYS
(75)
Date
Project No.
DrawnCheckedMarker Type
Project TitleDrawing Title
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
A B
C D
E F
DRAWING NO.
Sheet of
A B
C D
E F
Approved: Director, Memorial Programs Service
Approved: Chief of Operations, Memorial Programs Service
A-EM-5
5 6
Signed
Signed
G
G
DO NOT SCALE THIS DRAWING
Location
Digital File
A-EM-5.DWG 24" x 36" SHEET
PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY
GOVERNMENT HEADSTONES
AND MARKERS
EMBLEMS
KEE/KS
MLT
SYSTEMSALL
ApprovedCheckedDrawn
AE Contractor
42 310
1" = 1" GRAPHIC SCALE
DateRevisions DateRevisions
ADDED EMBLEM 61.
ADDED EMBLEMS 62, 63, 64 AND 65.
D 07-02-15
E 01-18-17
F 01-23-17ROTATED EMBLEM 6306-05-03---
SUPERSEDES DRAWING ID-4
SHEET 2 OF 2 DATED 12-2-99
REARRANGED ALL EMBLEMS TO FIT FULL SCALE
SHEET LAYOUT. REVISED GENERAL NOTES,
ADDED INDEX CHARTS
B 07-01-13 G 11-24-17ADDED EMBLEM 66 AND 67.
12-09-17H
ADD NOTES TO GENERAL NOTES NUMBER 1.
REPLACED NOTES TO GENERAL NOTES NUMBERS
2 AND 4. REVISED AE CONTRACTOR DETAILS.
06-28-18J
ADDED EMBLEM 68, 69 AND 70.
GENERAL NOTES:
1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT
MEASUREMENT AND ALL OTHER AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND
UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER
AREAS SHALL BE IN EQUAL PROPORTION.
2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.
3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN
AS FINISHED SURFACE.
4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO
DETAILED AS TO MAKE IT IMPRACTICAL TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.
DateRevisions
K 09-04-19
ADDED EMBLEMS 71, 72, 73 AND 74.
APRIL 13, 2021
JCH DMAVDN
L 04-13-21
ADDED EMBLEM 75. REVISED AE CONTRACTOR
DETAILS
1100 NORTH MOUNTAIN ROAD
HARRISBURG, PA 17112
717-533-9077
WWW.HONORENGINEER.COM
HONOR
ENGINEER CO.
AutoCAD SHX Text U
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text V
AutoCAD SHX Text E
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text A
AutoCAD SHX Text N
AutoCAD SHX Text S
AutoCAD SHX Text A
AutoCAD SHX Text F
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text N
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text
ATIONAL
AutoCAD SHX Text
EMETERY
MOH US AIR FORCE MOH US ARMY MOH US NAVY, US MARINE CORPS, AND US COAST GUARD
(98)
CANNOT BE MADE AVAILABLE FOR PUBLIC OR PRIVATE USE.
NOTE: THE ABOVE EMBLEM IS COPYRIGHT PROTECTED AND
ISLAMIC 5 POINTED STAR
Date
Project No.
DrawnCheckedMarker Type
Project TitleDrawing Title
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
A B
C D
E F
DRAWING NO.
Sheet Of
A B
C D
E F
Approved: Director, Memorial Programs Service
Approved: Chief of Operations, Memorial Programs Service
A-EM-6
6 6
Signed
Signed
G
G
DO NOT SCALE THIS DRAWING
Location
Digital File
A-EM-6.DWG 24" x 36" SHEET
PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY
GOVERNMENT HEADSTONES
AND MARKERS
EMBLEMS
KEE/KS
MLT
SYSTEMS
APRIL 13, 2021
ALL
DateRevisions DateRevisions
ApprovedCheckedDrawn
AE Contractor
JCH DMAVDN
ADDED EMBLEM 61.
ADDED EMBLEMS 62, 63, 64 AND 65.
D 07-02-15
E 01-18-17
F 01-23-17ROTATED EMBLEM 6306-05-03---
SUPERSEDES DRAWING ID-4
SHEET 2 OF 2 DATED 12-2-99
REARRANGED ALL EMBLEMS TO FIT FULL SCALE
SHEET LAYOUT. REVISED GENERAL NOTES,
ADDED INDEX CHARTS
B 07-01-13 G 11-24-17ADDED EMBLEM 66 AND 67.
42 310
1" = 1" GRAPHIC SCALE
12-09-17H
ADD NOTES TO GENERAL NOTES NUMBER 1.
REPLACED NOTES TO GENERAL NOTES NUMBERS
2 AND 4. REVISED AE CONTRACTOR DETAILS.
06-28-18J
ADDED EMBLEM 68, 69 AND 70.
GENERAL NOTES:
1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT
MEASUREMENT AND ALL OTHER AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND
UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER
AREAS SHALL BE IN EQUAL PROPORTION.
2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.
3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN
AS FINISHED SURFACE.
4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO
DETAILED AS TO MAKE IT IMPRACTICAL TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.
DateRevisions
K 09-04-19
ADDED EMBLEMS 71, 72, 73 AND 74.
L 04-13-21
ADDED EMBLEM 75. REVISED AE CONTACTOR
DETAILS
1100 NORTH MOUNTAIN ROAD
HARRISBURG, PA 17112
717-533-9077
WWW.HONORENGINEER.COM
HONOR
ENGINEER CO.
AutoCAD SHX Text U
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text V
AutoCAD SHX Text E
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text A
AutoCAD SHX Text N
AutoCAD SHX Text S
AutoCAD SHX Text A
AutoCAD SHX Text F
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text N
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text
ATIONAL
AutoCAD SHX Text
EMETERY
ITEM L-1
ITEM L-2
Date
Project No.
DrawnMarker Type
Project TitleDrawing Title
DRAWING NO.
Sheet Of
Approved: Director, Memorial Programs Service
Approved: Chief of Operations, Memorial Programs Service
A-LFN&OC-1
1 3
GOVERNMENT HEADSTONES,
MARKERS, AND NICHE COVERS
LETTERS, FONTS, NUMBERS &
OTHER CHARACTERS
Signed
Signed
DO NOT SCALE THIS DRAWING
Location
Digital File
A-LFN&OC-1.DWG 24" x 36" SHEET
PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY
" 1
" 1
" 1
" 1
" 1
" 1
" 1
" 1
" 1
"1
" 1
" 1
" 1
" 1
" 1
" 1
" 1
"1
" 1
" 1
" 1
" 1
"1
" 1
1"
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
A B
C D
E F
A B
C D
E F
G
G
1"
1"
ITEM L-1 CONTINUED
1 8
42 310
1" = 1" GRAPHIC SCALE
INSCRIPTION
SECTION E-E
STONE
INCISED
E E
TABLE
SEE
"AND" or
AMPERSAND SYMBOL
VIRGULEPARENTHESIS
NOTE 2:
NOTE 1:
DIERESIS
GRAVE ACCENT ACUTE ACCENT TILDE MACRON
THE ABOVE SYMBOLS WILL BE USED WHEN INDICATED ON THE
ORDER FORM. THE SIZE OF THE SYMBOLS WILL BE RELATIVE
TO THE SIZE OF THE LETTERS WITH WHICH THEY ARE USED.
COLON
HYPHENAPOSTROPHE
ROMAN NUMERALS WILL BE USED AS PART OF PROPER NAMES, WORLD WAR DESIGNATIONS OR IN
ANY MANNER INDICATED ON THE ORDER FORM. THEY WILL HAVE THE SAME HEIGHT, INSCRIBED TO THE
SAME DEPTH AS THE LETTERS OF THAT LINE FOR THE INSCRIPTION OF WHICH THEY ARE A PART.
WHEN RAISED, THEY WILL CONFORM IN A LIKE MANNER.
CROSS SECTION DETAIL ACCENT MARKS OTHER CHARACTERS
ROMAN
NUMERALS
ITEM L-2 CONTINUED
REFER TO
DEPTH CHART
BRONZE
RAISED
J J
SECTION J-J
1/64"
NOTE:
KEE/KS STONER
JUNE 13, 2016
Checked
SHOWN IN DRAWINGS RELATED TO SPECIFIC MONUMENT TYPES.
GENERAL NOTES
2.
3.
DateRevisions
TYPE
A-F-1
A-G1/J1/L1
A-MW-1/2/3
1 1/8" 1" 7/8" 3/4"
A-YA
2" OR 3"
MARKER
L1
A-U1-1/2
A-V1/W1
A-XA/XB/XC
7/16" 3/8" 5/8"
L2 L3 L4 L5 L6 L7 EMBLEM
ITEM NAME AND LETTER HEIGHT
LOCATION
DRAWING
F1
G1/J1/L1
A1/C1
YA
U1
V1/W1
XA/XB/XC
N/A N/A N/A N/A N/A4/32" - 5/32" 4/32" - 5/32" 4/32" - 5/32"
6/32" - 8/32" 4/32" - 6/32" 4/32" - 6/32" 6/32" - 8/32"
N/A N/A N/AN/A
7/32" - 9/32" 6/32" - 7/32" 6/32" - 7/32" 7/32" - 9/32"N/A N/A N/AN/A
6/32" - 8/32" 4/32" - 6/32" 4/32" - 6/32" 6/32" - 8/32"
N/A N/A N/AN/A
7/32" - 9/32" 6/32" - 7/32" 6/32" - 7/32" 7/32" - 9/32"N/A N/A N/AN/A
3/16" RAISED AND INSCRIBED
3/16" RAISED AND INSCRIBED
N/A
N/A N/A
N/A N/A
N/A
N/A
N/A
N/AN/A
N/A
N/A
N/A
Z1
A-B1
A-Z1
DEPTH BY MARKER TYPE
B1
N/A
3/32" 3/32" 3/32"N/A N/A N/A N/A N/A
3/32" 3/32" 3/32"N/A N/A N/AN/AN/A
DEPTH BY TYPE
A-NCIS-1/2 E1/H1/I1
4/32" - 6/32" 4/32" - 6/32" 4/32" - 6/32"5/32" - 7/32" N/A N/A N/A 5/32" - 7/32"
SUPERCEDES REV B - REVERT INSCRIPTION DEPTHS FOR
MARBLE TO PRE-REVISION B DEPTHS. CHANGES ARE IN
BOLD IN DEPTH BY TYPE TABLE.
ADDED L5 & L6 & L7 FONTS, UPDATED
INSCRIPTION TABLE, ADD SHT 2 & 3
MOVED INCISED DETAILS TO SHT 2, DELETED
EMBLEM 50, ADDED ACCENT MARKS &
CHARACTERS
SUPERSEDES DRAWING ID-4 DATED 12-2-99
FOR MARBLE AND GRANITE NICHE COVERS: SMALL CAPITAL LETTERS
WILL BE USED IN THE FOLLOWING MANNER: FOR "C" IN MC DONALD,
"AC" IN MAC DONALD, "R" IN JR, "D" IN 2D LIEUTENANT, "ST" IN
1ST LIEUTENANT, ETC. THEY WILL HAVE THE SAME DEPTH OR RISE
AS THE LARGE LETTERS. THE SIZE OF THE LETTERING WILL BE ITEM
L-3 WHEN USED WITH ITEM L-1 AND ITEM L-4 WHEN USED WITH ITEM
L-3.
THE COTR MAY PROVIDE WRITTEN APPROVAL TO SLIGHTLY REVISE THE
CENTER AREA OF LETTERS, NUMBERS, AND OTHER CHARACTERS TO
PREVENT BLOWOUT.
NOTE: AS OF JUNE 13, 2016 THE DEPTHS SURROUNDED BY BOLD BORDERS SUPERCEDE
DEPTHS WHICH WERE PREVIOUSLY SPECIFIED AND MUST BE FOLLOWED IN LIEU OF DEPTHS
SHOWN IN DRAWINGS RELATED TO SPECIFIC MONUMENT TYPES .
1.
THE MINIMUM DEPTH FOR ALL MARBLE AND GRANITE INSCRIPTIONS IS
4/32”. ANY PART OF ANY INSCRIPTION NOT MEETING THE MINIMUM WILL
BE SUBJECT TO REJECTION.
| A-T1 Model (1)_P1 |
| A-T6 Model (1)_P1 |
| A-B1, Rev A dtd 2019-09-23 |
| Sheets and Views |
| A-B1 |
| A-B6, Rev A dtd 2019-09-23 |
| Sheets and Views |
| A-B6 |
| A-EM Cover Page, Rev L dtd 2021-04-13 |
| Sheets and Views |
| COVERSHEET |
| A-EM-1, Rev I dtd 2017-12-23 |
| Sheets and Views |
| A-EM-1 |
| A-EM-2, Rev H dtd 2017-12-23 |
| Sheets and Views |
| A-EM-2 |
| A-EM-3, Rev H dtd 2017-12-23 |
| Sheets and Views |
| A-EM-3 |
| A-EM-4, Rev H dtd 2017-12-23 |
| Sheets and Views |
| A-EM-4 |
| A-EM-5, Rev L dtd 2021-04-13 |
| Sheets and Views |
| A-EM-5 |
| A-EM-6, Rev L dtd 2021-04-13 |
| Sheets and Views |
| A-EM-6 |
| A-LFN _ OC-1_Rev C_dtd 2016-6-13 |
| A-LFN _ OC-2_Rev C_dtd 2016-6-13 |
| A-LFN _ OC-3_Rev C_dtd 2016-6-13 |
File details come from the government source that posted it. Updated .