36C26119B0017-0003002.pdf

VA Northern California Health Care System VA Project 612-17-111 McClellan Park (Sacramento), California Renovate Bldg. 209 at McClellan

SECTION 09 06 00

SCHEDULE FOR FINISHES

PART 1 – GENERAL

1.1 DESCRIPTION

A. This section contains a coordinated system in which requirements for materials specified in other sections shown are identified by abbreviated material names and finish codes in the room finish schedule or shown for other locations.

1.2 MANUFACTURERS

A. Manufacturer’s trade names and numbers used herein are only to identify colors, finishes, textures and patterns. Products of other manufacturer’s equivalent to colors, finishes, textures and patterns of manufacturers listed that meet requirements of technical specifications will be acceptable upon approval in writing by contracting officer for finish requirements.

1.3 SUBMITALS

A. Submit in accordance with SECTION 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES provide quadruplicate samples for color approval of materials and finishes specified in this section.

1. DIGITAL COLOR PHOTOS-INTERIOR VIEWS (Verify locations and view with VA Project Engineer):

Room Number and Name Item/View to be Photographed

1. Room 103, Lobby As directed by VA Project Engineer

2. Room 118, Conference Room As directed by VA Project Engineer

3. Room 126, Open Office As directed by VA Project Engineer

4. Room 202, Lobby As directed by VA Project Engineer

1.4 APPLICABLE PUBLICATIONS

A. Publications listed below form a part of this specification to the extent referenced. Publications are referenced in text by basic designation only.

B. MASTER PAINTING INSTITUTE: (MPI)

2001 ........................................... Architectural Painting Specification Manual

PART 2 - PRODUCTS

2.1 DIGITAL COLOR PHOTOS

A. Size 24 x 35 mm (0.94 x 1.38 inches)

B. Labeled for:

1. Building name and Number

2. Room Name and Number

2.2 DIVISION 05 – METALS

A. SECTION 05 50 00, METAL FABRICATION

Item Finish

Modular Channel Units Factory Painted; touch up cut ends.

2.3 DIVISION 07 - THERMAL AND MOISTURE PROTECTION

A. SECTION 07 60 00, FLASHING AND SHEET METAL

Item Material Finish

Flashing at Exterior Louvers Stainless steel Unpainted, #4 finish; natural color

B. SECTION 07 92 00, JOINT SEALANTS

Location Color Manufacturer Manufacturer Color

New to Existing Walls Color to match adjacent wall surface

Dow Corning (Basis of Design) Color to match adjacent wall surface

Plumbing Fixtures to Floors/Walls White with biocidal component do White

2.4 DIVISION 08 - OPENINGS

A. SECTION 08 11 13, HOLLOW METAL DOORS AND FRAMES

Paint both sides of door frames same color including ferrous metal louvers, and hardware attached to door.

Finish Code Component Color of Paint Type and Gloss

O-8 Hollow Metal Frame Dunn Edwards, Semi-gloss (Level 5); Color to match adjacent wall surface.

B. SECTION 08 14 00, WOOD DOORS

Component Finish/Color

Wood Doors WDMA I.S.1-A Section F-3 specification for System TR-4, Conversion Varnish or System TR-5, Catalyzed Vinyl; Color: Match existing doors.

C. SECTION 08 14 23, HIGH IMPACT RESISTANT WOOD DOORS

Finish Code Component Finish/Color

O-7 Doors CS Acrovyn, Flush Type; Color: 372 ‘Classic Maple’

D. SECTION 08 31 13, ACCESS DOORS AND FRAMES

Material Finish/Color

Galvanized Steel Painted, Level 5; Color to match adjacent wall surface.

Stainless steel Unpainted, #4 finish; natural color

E. SECTION 08 5 13, ALUMINUM WINDOWS

Storefront frames Clear Anodized Aluminum

F. SECTION 08 71 00, HARDWARE

Item Material Finish

Hinges Satin Chrome Plated Steel 652

Surface Closers Aluminum Painted 689

Floor/Wall Stops Satin Stainless Steel 630

Locks/Latches Satin Chrome Plated Brass/Bronze 626

Kick/Mop Plates Stainless Steel #4 Finish

Push/Pull Plates Stainless Steel #4 Finish

Mortise Shell Satin Chrome Plated Brass/Bronze 626

Const. Latching Bolt/Dust Proof Strike Satin Stainless Steel 630

Coordinator Satin Aluminum, Clear Anodized 628

Low-Voltage Power-Assist Actuator Plates Satin Stainless Steel 630

G. SECTION 08 80 00, GLAZING

Glass, Tempered, 6 mm (¼”) Thick Clear, Kind FT, Condition A, Type I, Class 1, Quality q3

2.5 DIVISION 09 - FINISHES

A. SECTION 09 30 13, CERAMIC/PORCELAIN TILING

Finish Code Component Color Pattern Manufacturer Mfg Name/No.

F-3

GR-1

Floor Tile

Grout

Avondale

Dal Tile

Custom Bldg.

Products

AD03 – ‘Castle Rock’

#10 – ‘Antique White’

B-3

GR-1

TR-1

Base

Grout

Trim

Avondale

Dal Tile

Custom Bldg.

Products

Schluter

AD03 – ‘Castle Rock’

#10 – ‘Antique White’

‘DILEX-HKS’ Stainless Steel

W-3

GR-2

Wall Tile

Grout

Articulo Dal Tile

Custom Bldg.

Products

0190 – ‘Arctic White’

#318 – ‘Bright White’

W-4

GR-2

Accent Tile

Grout

Slate Radiance (Mosaic Blend Tile) Dal Tile

Custom Bldg.

Products

SA57 - ‘Cactus’

#318 – ‘Bright White’

B. SECTION 09 51 00, ACOUSTICAL CEILINGS

Finish Code Component Color Pattern Manufacturer Mfg Name/No.

C-1 Exposed Suspension System, 9/16” Face

Blizzard White Armstrong ‘Suprafine’

C-1 Acoustic Unit

610 x 610 mm (24” x 24”) and 610 x 1220 mm (24” x 48”)

Beveled Tegular; Color:

White

Armstrong ‘Ultima’

C. SECTION 09 65 13, RESILIENT BASE AND ACCESSORIES

Finish Code Item Height Manufacturer Mfg Name/No.

B-1 Rubber Base (RB), Millwork-Reveal Style

108 mm (4-1/4”) Tarkett/Johnsonite MW-XX-F;

Color: ‘TB1 Peppercorn’

B-2 Rubber Base (RB), Millwork-Reveal Style

152 mm (6”) Tarkett/Johnsonite MW-XX-F;

Color: ‘TB1 Peppercorn’

O-3 Transition - Carpet to Concrete

12.7 mm (½”) maximum Tarkett/Johnsonite ‘Edgeguards’

EG-XX-H;

Color: ‘20 Charcoal WG’

O-4 Transition – Carpet to LVT 12.7 mm (½”) maximum Tarkett/Johnsonite Transition Strip

XLT-XX-A

O-5 Transition – Ceramic Tile to

LVT

12.7 mm (½”) maximum Schluter Transition Strip Reno-U; Color: Satin anodized aluminum

D. SECTION 09 65 19, RESILIENT TILE FLOORING (LUXURY VINYL TILE)

Finish Code Size Pattern direction Manufacturer Mfg. Color Name/No.

F-2 114 mm x 914 mm (4½ inches x 36 inches) Strips,

2.5 mm (0.10 inch) Thick

As Indicated in Drawings Mannington ‘City Park’ Windsor Oak; Color:

CPC102 ‘Moleskin’

E. SECTION 09 68 00, CARPETING (CFT)

Finish Code Size Pattern direction Manufacturer Mfg. Color Name/No.

F-1a 610 x 610 mm (24” x 24”) As Indicated in Drawings Patcraft Newground Collection, #10286 Earthen

Weave; Color: ‘Enchanted’

F-1b 610 x 610 mm (24” x 24”) As Indicated in Drawings Patcraft Newground Collection, #10285 City Flora;

Color: ‘Enchanted’

F. SECTION 09 91 00, PAINTING

1. MPI Gloss and Sheen Standards Gloss @60 Sheen @85

Gloss Level 1 a traditional matte finish-flat max 5 units, and max 10 units

Gloss Level 2 a high side sheen flat-“a velvet-like” finish max 10 units, and 10-35 units

Gloss Level 3 a traditional “egg-shell like” finish 10-25 units, and 10-35 units

Gloss Level 4 a “satin-like” finish 20-35 units, and min. 35 units

Gloss Level 5 a traditional semi-gloss 35-70 units

Gloss Level 6 a traditional gloss 70-85 units

Gloss level 7 a high gloss more than 85 units

2. Paint code Gloss Manufacturer Mfg. Color Name/No.

W-1 Level 3 Dunn Edwards Color: DEW380 ‘White’

W-2 Level 3 Dunn Edwards Color: DEC771 ‘Shaggy Barked’

C-2 Level 3 Dunn Edwards Color: DEW345 ‘White Fever’

2.6 DIVISION 10 - SPECIALTIES

A. SECTION 10 14 00, SIGNAGE

Component Finish Manufacturer Mfg. Color Name/No.

Perimeter Frame Satin Clear Anodized Aluminum, 75% Recycled Content

TBD TBD

Sign Face Acrylic TBD Color: White

Sign Face Plastic Laminate WilsonArt Color: ‘Kensington Maple’

Sign Pocket 3-Ply Non-Glare Acrylic TBD Color: Clear

Raised Text Acrylic TBD Color: Black

Braille Acrylic TBD Color: Clear

B. SECTION 10 21 13, TOILET PARTITIONS

Finish Code Component Finish Manufacturer Mfg. Color Name/No.

O-9 Toilet Partitions-Overhead Braced

Stainless Steel Bradley 5WL, #4 Finish

O-9 Fittings, Accessories Chrome Plated Zamac or Stainless Steel as Indicated

Bradley do

C. SECTION 10 26 00, DOOR AND WALL PROTECTION

Finish Code Item Material Manufacturer Mfg. Color Name/No.

O-6 Corner Guards Stainless Steel Koroguard GS30, #4 Finish

D. SECTION 10 28 00, TOILET, BATH, AND LAUNDRY ACCESSORIES

Item/ Type Finish Manufacturer Mfg. Color Name/No.

Soap Dispensers Plastic; Color: Gray/White Provon LTX-12

Metal Framed Mirrors #4 Stainless Steel Bobrick B-165-2436

Grab Bars #4 Stainless Steel Bobrick B-5806.99

Seat Cover Dispensers #4 Stainless Steel Bobrick B-4221

Toilet Tissue Dispensers #4 Stainless Steel Bobrick B-2888

Sanitary Napkin Disposals #4 Stainless Steel Bobrick B-270

Double Robe Hook #4 Stainless Steel Bobrick B-6727

Recessed Convertible Paper Towel Dispenser and Waste

Receptacle

#4 Stainless Steel Bobrick B-3944

Paper Towel Dispensers Commercial Grade Steel GP Pro enMotion 59466A

Utility Shelf w/ Mop/Broom Holders

#4 Stainless Steel Bobrick B-239

Soft Trap Covers Vinyl; Color: White Soft Guard Plus 82524

E. SECTION 10 44 13, FIRE EXTNGUISHER CABINETS

Component Material Finish

Cabinet Body and Door Steel Factory Primed, Suitable for Field Painting

Cabinet Body Interior Steel Factory painted, Baked-on Semigloss Enamel;

Color: White

Door Glazing 6 mm (1/4”) Clear Acrylic Factory

2.7 DIVISION 11- FURNISHINGS

A. SECTION 11 31 13, RESIDENTIAL APPLIANCES

Item/ Type Finish Manufacturer Mfg. Color Name/No.

Refrigerator Factory Provided by VA – GFGI Provided by VA – GFGI

Microwave Oven Factory Provided by VA – GFGI Provided by VA – GFGI

Coffee Maker Factory Provided by VA – GFGI Provided by VA – GFGI

2.8 DIVISION 12- FURNISHINGS

A. SECTION 12 24 13, ROLLER SHADES

Type Mfg. Color Name/No.

O-10 Window Treatment Mechoshade ThermoVeil Diamond Weave, 3000 Series; Color: ‘3010 Alabaster’

O-10 Window Treatment Shade Tube Assembly: Extruded Aluminum; Color: Satin Clear Anodized

B. SECTION 12 32 00, PLASTIC LAMINATE FACED WOOD CASEWORK

Item Type Location Finish/Color

O-1 Plastic Laminate Exposed Surfaces of Casework WilsonArt; Color: ‘Kensington Maple’

O-1 Plastic Laminate Concealed Surfaces of Casework WilsonArt; Color: ‘White’

C. SECTION 12 36 00, COUNTERTOPS AND ACCESSORIES

Type Finish/Color

O-2 Solid Surface DuPont ‘Corian’; Color: ‘Sagebrush’

PART 3 - EXECUTION

3.1 FINISH SCHEDULES & MISCELLANEOUS ABBREVIATIONS

FINISH SCHEDULE & MISCELLANEOUS ABBREVIATIONS

Term Abbreviation

Acoustical Ceiling AT

Baked On Enamel BE

Carpet Module Tile CPT

Concrete C

Existing E

Gypsum Wallboard GWB

Material MAT

Paint P

Plastic Laminate HPDL

Vinyl Base VB

3.2 FINISH SCHEDULE SYMBOLS

Symbol Definition

** Same finish as adjoining walls

- No color required

E Existing

XX To match existing

EFTR Existing finish to remain

RM Remove

3.3 ROOM FINISH SCHEDULE

A. Match adjoining or existing similar surfaces colors, textures or patterns where disturbed or damaged by alterations or new work when not scheduled.

B. ROOM FINISH SCHEDULE – See Drawings.

--- E N D---