36C26118B0301-A0003007.pdf

CONSTRUCT PSYCHOSOCIAL REHABILITATION AND RECOVERY CENTER 612-503

MARTINEZ, CA FINAL – REISSUE FOR BID

ADVANCE DESIGN CONSULTANTS INC.

04/27/2018 08 34 00 - 1

SECTION 08 34 00

SPECIAL FUNCTION DOORS

PART 1 - GENERAL

1.01 RELATED DOCUMENTS

A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

1.02 SUMMARY

A. Section includes:

1. Interior Aluminum-Framed Top-Hung Sliding Doors

B. Related Sections:

1. Section 08 14 16 – Flush Wood Door

2. Section 08 13 16 – Aluminum Doors

1.03 REFERENCES

A. ANSI – American National Standards Institute

1. ANSI 156.18 Materials and Finishes

2. ANSI A117.1 Specifications for making buildings and facilities usable by physically handicapped people.

B. BHMA – Builders Hardware Manufacturers Association

C. DHI – Door and Hardware Institute

D. NFPA – National Fire Protection Association

1. NFPA 80 – Fire Doors and Windows

2. NFPA 101 – Life Safety code

3. NFPA 105 – Smoke and Draft Control Door Assemblies

4. NFPA 252 – Fire Tests of Doors Assemblies

E. AWS – Architectural Woodwork Standards

1.04 SUBMITTALS

A. Comply with Section 01 33 00 – Submittal Procedures

B. Product Data: Submit manufacturer’s product data, including installation instructions.

04/27/2018 08 34 00 - 2

C. Shop Drawings: Submit manufacturer’s shop drawings, including plans, elevations, sections, and details, indicating dimensions, tolerances, materials, components, hardware, finish, options, and accessories. Shop Drawings to show required blocking by others.

D. Samples: Submit manufacturer’s samples of the following sliding door components:

1. Door veneer or laminate sample.

2. Aluminum Frame finish sample.

E. Manufacturer’s Certification: Submit manufacturer’s certification that materials comply with specified requirements and are suitable for intended application.

F. Warranty Documentation: Submit manufacturer’s standard warranty.

G. Test Reports: Submit acoustical reports or UL1784 as applicable.

1.05 QUALITY ASSURANCE

A. Product Options: Drawings indicate size, profiles, and dimensional requirements of interior aluminum frames and doors.

B. Source: Obtain sliding aluminum framed doors and hardware from single source.

C. Manufacturer's Qualifications: Manufacturer regularly engaged for past 5 years in manufacture of sliding doors similar to that specified.

1.06 PERFORMANCE

A. Aluminum perimeter frames with integral acoustic seals.

B. Soft self-closing mechanism integrated with top track.

C. Concealed door guide.

1.07 DELIVERY, STORAGE, AND HANDLING

A. Delivery and Acceptance Requirements: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.

B. Notify manufacturer immediately of any shipping damage.

C. Storage and Handling Requirements:

1. Store and handle materials in accordance with manufacturer’s instructions.

2. Keep materials in manufacturer’s original, unopened containers and packaging until installation.

3. Store materials in clean, dry area indoors.

4. Protect materials and finish during storage, handling, and installation to prevent damage.

04/27/2018 08 34 00 - 3

PART 2 - PRODUCTS

2.01 MANUFACTURERS

A. AD SYSTEMS 2201 100th St. SW, Everett, WA 98204 | Website: http://specADsystems.com | Phone: 425-374-1360 | Attn: Estimating: estimating@specADsystems.com

2.02 INTERIOR SLIDING ALUMINUM-FRAMED DOORS AND PARTITIONS

A. Manufacturer:

1. Scheduled Manufacturer: ExamSlide™ High Performance Barn (Sliding) Door System by AD Systems.

2. Acceptable Substitute: Equal

B. Specified Wall Thickness: per drawings

C. Frame Profiles: Extruded aluminum frame “wrap” frame with integral vertical jamb (stile pocket).

D. Finish:

1. Standard: Painted Hardcoat (Kynar) Finish. Meets AAMA 2604 Standard Colors: Light Sequin 789G048 (per AOR Review)

E. Door Leafs. All Doors to be factory machined for hardware including pilot and function holes.

1. 1-3/4" Flush Wood Door: Reference Spec Section 08200 Wood Doors or other section as applicable.

F. Door Components:

1. Single Top Track: AD Systems extruded aluminum track by AD Systems

2. Valances: Extruded aluminum with integral end caps

a. Standard square valance.

3. Top Rollers: tandem nylon roller sized to match door weight

4. Concealed Floor Guide: Integral Jamb floor guide by AD Systems

5. Soft-Closer: Soft and self-closing damper mechanism at [one] or [both] sides of door leaf

6. Handles:

a. AD Systems Standard Straight Pull: 12” long x 1” diameter. Finish: US32D Satin Stainless Steel.

G. Accessories:

H. Door Locks:

1. Mortise Latch and Lock Options: Contact AD Systems for assistance

a. ADA-4 Self Latching - Thumbturn with Key Lock & Lever

04/27/2018 08 34 00 - 4

2. Magnetic Lock

I. Self-Closing Spring Mechanism

J. Automatic Door Bottom for improved acoustical performance

K. Additional hardware functionality can be accommodated. Please contact AD Systems with your hardware requirements and we evaluate system compatibility and create specification language.

PART 3 - EXECUTION

3.01 EXAMINATION

A. Examine wall openings to receive sliding doors for plumb, level, and square. Note: Finish door operation will be affected by out of tolerance framing.

B. Verify dimensions of wall openings.

C. Examine surfaces to receive top and bottom guide.

D. Notify Architect of conditions that would adversely affect installation or subsequent use of sliding doors.

E. Do not begin installation until unacceptable conditions are corrected.

F. Base of door side to be flush or minimal. Rubber Base acceptable.

3.02 INSTALLATION

A. Install sliding doors in accordance with manufacturer’s instructions at locations indicated on the Drawings.

B. Install sliding doors plumb, level, square, and in proper alignment.

C. Install sliding doors to close against walls without gaps

D. Install sliding doors to open and close smoothly.

E. Anchor sliding doors securely in place to supports. Required: Fire treated 2 x 6 blocking required full length of track.

3.03 ADJUSTING

A. Adjust sliding doors for proper operation in accordance with manufacturer’s instructions.

B. Adjust sliding doors to operate smoothly without binding.

C. Repair minor damages to finish in accordance with manufacturer’s instructions and as approved by Architect.

04/27/2018 08 34 00 - 5

3.04 CLEANING

A. Clean sliding doors promptly after installation in accordance with manufacturer’s instructions.

B. Do not use harsh cleaning materials or methods that could damage materials or finish.

3.05 PROTECTION

A. Protect installed sliding doors from damage during construction.

-- END OF SECTION --