Atch. 3_36C26027R0002 0007_Specs. Sec. 080671-rv_531-25-102 Expand ED.pdf
PDF 4 MB Posted
- Attached to
- Y1DA--CON NRM 531-25-102 | Expand Emergency Room
- Solicitation number
- 36C26027R0002-0007
About this file
SECTION 080671: DOOR HARDWARE SCHEDULE
This specification section establishes requirements for commercial door hardware for the Expand Emergency Department project at Boise VAMC (VA Project No. 531-25-102). The section covers mechanical, electromechanical, and access control door hardware for swinging doors, sliding doors, and automatic operators. All work must comply with ANSI A117.1, ICC/IBC, NFPA 70, NFPA 80, NFPA 101, and NFPA 105 standards. Submittals must include manufacturer product data sheets, a detailed door hardware schedule organized by hardware sets following DHI's sequence and format standards, keying schedules (prepared under owner supervision), product test reports demonstrating cycle testing compliance, operating and maintenance manuals with manufacturer contact information, and warranties per related sections. Contractors must inventory hardware upon receipt with secure storage and handle electronic access control items only with prior authorization. Permanent keys, cylinders, cores, and access control credentials must be delivered directly to the owner via registered mail or overnight service with delivery instructions established at a keying conference.
The hardware schedule specifies 13 distinct hardware sets (1.0–13.0) for 50+ individual door designations, each detailing specific components, manufacturers, finishes, and quantities. Hardware manufacturers referenced include McKinney, Markar, Pemko, Rixson, ASSA ABLOY, Securitron, Hager, Rockwood, Sargent, Adams Rite, Medeco, BEST Locks, HES, and Norton. Sets range from basic mechanical hardware (hinges, locks, floor stops, kick plates) to complex electromechanical assemblies featuring continuous hinges, electric power transfers, exit devices, fail-secure locks, controllers, and frame/door harnesses. Set 8.0 addresses sliding door track hardware, and Set 11.0 designates hardware by door supplier. The supplier bears full responsibility for proper handing, sizing, and application of all products, with field inspection required at existing openings to verify compatibility prior to submittal. Owner approval of the keying schedule must precede permanent cylinder ordering. Maintenance tools and instructions must be provided for the owner's continued maintenance and hardware replacement.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Atch. 1_36C26027R0002 0007_RFI Log No. 2_531-25-102 Expand ER.xlsx | XLSX spreadsheet | |
| Atch. 2_36C26027R0002 0007_Drawing E501-rv_531-25-102 Expand ED.pdf | ||
| 36C26027R0002 0007.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
VA PROJECT NO. 531-25-102
EXPAND EMERGENCY DEPARTMENT BOISE VAMC
03-01-24
DOOR HARDWARE SCHEDULE 1
SECTION 080671
DOOR HARDWARE SCHEDULE
PART 1 - GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division 1 Specification Sections, apply to this Section.
1.2 SUMMARY
A. This Section references specification sections relating to commercial door hardware for the following:
1. Swinging doors.
2. Sliding Doors.
3. Other doors to the extent indicated.
B. Commercial door hardware includes, but is not necessarily limited to, the following:
1. Mechanical door hardware.
2. Electromechanical and access control door hardware.
3. Electromechanical and access control door hardware power supplies, back-ups and surge protection.
4. Automatic operators.
5. Cylinders specified for doors in other sections.
C. Related Sections:
1. Division 08 Section “Interior Sliding Wood Door Assemblies”.
2. Division 08 Section “Interior Sliding Wood Sound Control Door Assemblies”.
3. Division 08 Section “Door Hardware”.
4. Division 08 Section “Automatic Door Operators”.
5. Division 28 Section “Access Control Hardware Devices”.
D. Codes and References: Comply with the version year adopted by the Authority Having
Jurisdiction.
1. ANSI A117.1 - Accessible and Usable Buildings and Facilities.
2. ICC/IBC - International Building Code.
3. NFPA 70 - National Electrical Code.
4. NFPA 80 - Fire Doors and Windows.
5. NFPA 101 - Life Safety Code.
DOOR HARDWARE SCHEDULE 2
6. NFPA 105 - Installation of Smoke Door Assemblies.
7. State Building Codes, Local Amendments.
E. Standards: Reference Related Sections for requirements regarding compliance with applicable industry standards.
1.3 SUBMITTALS
A. Product Data: Manufacturer's product data sheets including installation details, material descriptions, dimensions of individual components and profiles, operational descriptions and finishes.
B. Door Hardware Schedule: Prepared by or under the supervision of supplier, detailing fabrication and assembly of door hardware, as well as procedures and diagrams. Coordinate the final Door
Hardware Schedule with doors, frames, and related work to ensure proper size, thickness, hand, function, and finish of door hardware.
1. Format: Comply with scheduling sequence and vertical format in DHI's "Sequence and
Format for the Hardware Schedule."
2. Organization: Organize the Door Hardware Schedule into door hardware sets indicating complete designations of every item required for each door or opening. Organize door hardware sets in same order as in the Door Hardware Sets at the end of Part 3. Submittals that do not follow the same format and order as the Door Hardware Sets will be rejected and subject to resubmission.
3. Content: Include the following information:
a. Type, style, function, size, label, hand, and finish of each door hardware item.
b. Manufacturer of each item.
c. Fastenings and other pertinent information.
d. Location of door hardware set, cross-referenced to Drawings, both on floor plans and in door and frame schedule.
e. Explanation of abbreviations, symbols, and codes contained in schedule.
f. Mounting locations for door hardware.
g. Door and frame sizes and materials.
4. Submittal Sequence: Submit the final Door Hardware Schedule at earliest possible date, particularly where approval of the Door Hardware Schedule must precede fabrication of other work that is critical in the Project construction schedule. Include Product Data, Samples, Shop Drawings of other work affected by door hardware, and other information essential to the coordinated review of the Door Hardware Schedule.
C. Keying Schedule: Prepared under the supervision of the Owner, separate schedule detailing final keying instructions for locksets and cylinders in writing. Include keying system explanation, door numbers, key set symbols, hardware set numbers and special instructions.
Owner to approve submitted keying schedule prior to the ordering of permanent cylinders.
DOOR HARDWARE SCHEDULE 3
D. Product Test Reports: Indicating compliance with cycle testing requirements, based on evaluation of comprehensive tests performed by manufacturer and witnessed by a qualified independent testing agency.
E. Operating and Maintenance Manuals: Provide manufacturers operating and maintenance manuals for each item comprising the complete door hardware installation in quantity as required in Division 01, Closeout Submittals. The manual to include the name, address, and contact information of the manufacturers providing the hardware and their nearest service representatives. The final copies delivered after completion of the installation test to include "as built" modifications made during installation, checkout, and acceptance.
F. Warranties and Maintenance: Special warranties and maintenance agreements specified in the
Related Sections.
1.4 DELIVERY, STORAGE, AND HANDLING
A. Inventory door hardware on receipt and provide secure lock-up and shelving for door hardware delivered to Project site. Do not store electronic access control hardware, software or accessories at Project site without prior authorization.
B. Tag each item or package separately with identification related to the final Door Hardware
Schedule, and include basic installation instructions with each item or package.
C. Deliver, as applicable, permanent keys, cylinders, cores, access control credentials, software and related accessories directly to Owner via registered mail or overnight package service.
Instructions for delivery to the Owner shall be established at the "Keying Conference".
1.5 WARRANTY
A. General Warranty: Reference Division 01, General Requirements. Special warranties specified in this Article shall not deprive Owner of other rights Owner may have under other provisions of the Contract Documents and shall be in addition to, and run concurrent with, other warranties made by Contractor under requirements of the Contract Documents.
1.6 MAINTENANCE SERVICE
A. Maintenance Tools and Instructions: Furnish a complete set of specialized tools and maintenance instructions as needed for Owner's continued adjustment, maintenance, and removal and replacement of door hardware.
PART 2 - PRODUCTS
2.1 SCHEDULED DOOR HARDWARE
A. Refer to “PART 3 – EXECUTION” for required specification sections.
DOOR HARDWARE SCHEDULE 4
PART 3 - EXECUTION
3.1 DOOR HARDWARE SETS
A. The door hardware sets represent the design intent and direction of the owner and architect.
They are a guideline only and should not be considered a detailed hardware schedule.
Discrepancies, conflicting hardware and missing items should be brought to the attention of the architect with corrections made prior to the bidding process. Omitted items not included in a hardware set should be scheduled with the appropriate additional hardware required for proper application and functionality.
1. Quantities listed are for each pair of doors, or for each single door.
2. The supplier is responsible for handing and sizing all products.
3. Where multiple options for a piece of hardware are given in a single line item, the supplier shall provide the appropriate application for the opening.
4. At existing openings with new hardware the supplier shall field inspect existing conditions prior to the submittal stage to verify the specified hardware will work as required. Provide alternate solutions and proposals as needed.
B. Products listed in the hardware sets shall be supplied by and in accordance with the requirements described in the specification section as noted for each item.
1. Section 08 14 73 – Interior Sliding Wood Door Assemblies.
2. Section 08 34 73 – Interior Sliding Wood Sound Control Door Assemblies.
3. Section 08 71 00 – Door Hardware.
4. Section 08 71 13 – Automatic Door Operators.
5. Section 28 15 00 – Access Control Hardware Devices.
C. Manufacturer’s Abbreviations:
1. MK - McKinney
2. MR - Markar
3. PE - Pemko
4. RF - Rixson
5. GS - ASSA ABLOY Glass Solutions
6. SU - Securitron
7. HA - Hager
8. RO - Rockwood
9. YA - ASSA ABLOY ACCENTRA
10. SA - SARGENT
11. AD - Adams Rite
12. MC - Medeco
13. BE - BEST Locks & Closers
DOOR HARDWARE SCHEDULE 5
14. HS - HES
15. NO - Norton
Hardware Sets
Set: 1.0
Doors: 851000, C004, C16B
Continuous Hinge
(A51331BxHGxAS)
HG315 CTP AS 630 MR
2 Electric Power Transfer CEPT-10 630 SU
1 Exit Device (Type 8, 01 E04) 7160 LBR MELR EO ECK1 630 YA
1 Exit Device (Type 8, 08/09 E04) 7160 LBR MELR AU627F ECK1 630 YA
1 Rim Cylinder (E09261) K680 626 YA
1 Permanent Core SFIC type, F keyway 7-pin BE
2 Kick Plate (J102) K1050 10" BEV CSK US32D RO
2 Floor Stop (L02121) 470 US26D RO
2 Edge Guard (J208M / J211) 310B / 302B US32D RO
2 Astragal (R3E734) 29310CV PE
2 Adhesive Gasketing (R0Y154) S773BL PE
2 Auto Door Bottom (R0Y346) 434ARL PE
2 Frame Harness QC-C1500P MK
2 Door Harness QC-C___ MK
1 Controller 782 YA
Notes:
Power transfers shared by electric panic and reactivation sensor wiring (reactivation sensors provided by section 08 71 13).
Auto door operators and controls by section 08 71 13.
Edge guards at wood doors only.
Set: 2.0
Doors: 851037B, C004B, ST14
(A51331BxHGxAS)
HG305 CTP AS 630 MR
1 Electric Power Transfer CEPT-10 630 SU
1 Exit Device (Type 1, E04) 6100F B P AU626F 630 YA
1 Rim Cylinder (E09261) K680 626 YA https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180637617, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211975319,211975293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033043, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033043, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212034638,212034901, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212002982, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079030,168873932, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079031,168873901, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212037999,212042577, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043211,212042892, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043774,212043623, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954233, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954242, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033225, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211971852,167999461,168612583, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180637613, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211975319,211975293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033708,212033472, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212034638,212034901, DOOR HARDWARE SCHEDULE 6
1 Armor Plate (J101) K1050 35" BEV CSK US32D RO
1 Floor Stop (L02121) 470 US26D RO
1 Edge Guard (J208M / J211) 310B / 302B US32D RO
1 Adhesive Gasketing (R0Y154) S88BL PE
1 Frame Harness QC-C1500P MK
1 Door Harness QC-C___ MK
1 Position Switch (E08) DPS-M-BK SU
Power transfer shared by electric panic and re-activation sensor wiring (re-activation sensors provided by section 08 71 13).
Auto door operator and controls by section 08 71 13.
Edge guard at wood doors only.
Set: 3.0
Doors: 851000A, 851002, 851003, 851011, 851015, 851017, 851023, 851024, 851025 851026, 851031, 851037A, 851050, 851051, C002, E851034
2 Hinge (A8112) TA2714 US26D MK
1 Hinge (A8112-Elect) TA2714 QC__ US26D MK
1 Fail Secure Lock (F07, E01, E06) B AU 4791LN 626 YA
1 Permanent Core SFIC type, F keyway 7-pin BE
1 Surface Closer (C02011 / C02021) 5801 / 5821 (remove Stop) 689 YA
1 Floor Stop (L02121) 470 US26D RO
2 Adhesive Gasketing (R0Y154) S773BL PE
1 Auto Door Bottom (R0Y346) 434ARL PE
1 57mm Threshold (J32300) 173A PE
1 Frame Harness QC-C1500P MK
1 Door Harness QC-C___ MK
1 Position Switch (E08) DPS-M-BK SU
1 Card Reader BY SECURITY INTEGRATOR
1 Power Supply BPS-24-_ YA
120VAC power, conduit, and wiring by division 26.
Card reader by division 28.
Set: 4.0
Doors: E851014 https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212002982, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079030,168873932, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079031,168873901, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043211,212043198, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954233, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954242, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211975386,211975347, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033225, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211971852,211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954045, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954045, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033873,212033894,212032499, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212034756,-596769, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079030,168873932, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043211,212042892, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043774,212043623, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212042136,212041053, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954233, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954242, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211975386,211975347, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033899, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, DOOR HARDWARE SCHEDULE 7
6 Hinge (A8112) TA2714 US26D MK
1 Flush Bolt (Type 25) 2848 / 2948 US32D RO
1 Storeroom Lock (F07) AUR 8805FL Temp Core 626 YA
1 Coordinator (Type 21A) 2600 Series Black RO
2 Surface Closer (C02011 / C02021) 5801 / 5821 (remove Stop) 689 YA
2 Kick Plate (J102) K1050 10" BEV CSK US32D RO
2 Floor Stop (L02121) 470 US26D RO
1 Astragal (R0Y634) 357C PE
2 Adhesive Gasketing (R0Y154) S88BL PE
Set: 5.0
Doors: 851007, 851008, 851029, 851040, 851041, 851042
3 Hinge (A8112) TA2714 US26D MK
1 Entry Lock (F04) B AU 4707LN 626 YA
1 Permanent Core SFIC type, F keyway 7-pin BE
1 Floor Stop (L02121) 470 US26D RO
1 Adhesive Gasketing (R0Y154) S88BL PE
1 Coat Hook (L03111) 806 US26D RO
Omit coat hook where glass lite prevents installation.
Set: 6.0
Doors: 851031A, 851038
1 Passage Set (F01) AU 4701LN 626 YA
1 Permanent Core SFIC type, F keyway 7-pin BE
1 Floor Stop (L02121) 470 US26D RO
1 Adhesive Gasketing (R0Y154) S88BL PE
1 Coat Hook (L03111) 806 US26D RO
Omit coat hook where glass lite prevents installation.
Set: 7.0
Doors: 851013, 851029A, 851030, 851031B https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954045, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212078816,114050794, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212034149,212033944,212032394, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079003,168873970, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212034756,-596769, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212002982, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079030,168873932, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212037999,212038420, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043211,212043198, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954045, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033873,212033880,212032499, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079030,168873932, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043211,212043198, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079134,168873962, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954045, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033873,212033874,212032499, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079030,168873932, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043211,212043198, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079134,168873962, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, DOOR HARDWARE SCHEDULE 8
1 Privacy Lock (F19) AU YPL02 626 YA
1 Kick Plate (J102) K1050 10" BEV CSK US32D RO
1 Mop Plate (J103) K1050 6" BEV CSK US32D RO
1 Wall Stop (L02101) 401 US26D RO
3 Silencer (L03011) 608 RO
Mop plate at inswinging doors only.
Stone threshold by other trades.
Set: 8.0
Doors: 851003B, 851004, 851005, 851006, 851012, 851016, 851018, 851019, 851021, 851028A, 851028B, 851032, , 851033, 851036
1 Set Track Hardware (A156.14, GR1)
TYPE REQUIRED FOR DOOR
MATERIAL, WEIGHT, AND
MOUNTING DETAILS
(COMPLETE WITH TRACK,
TRACK BRACKETS, HANGERS,
GUIDES, BUMPERS, AND
INTERNAL TRACK STOPS)
2 Pull TYPE AS REQUIRED
Set: 10.0
Doors: E851027B
(A51331BxHGxAS)
HG315 CTP AS 630 MR
2 Electric Power Transfer CEPT-10 630 SU
1 Exit Device (Type 8, 08/09 E04) 6160 LBR P AU626F 630 YA
1 Exit Device (Type 8, 01 E04) 6160 LBR P EO 630 YA
1 Interchangeable Core (E09241) 33600006N 26 MC
1 Rim Cylinder (E09261) K680 626 YA
2 Kick Plate (J102) K1050 10" BEV CSK US32D RO
2 Floor Stop (L02121) 470 US26D RO
2 Edge Guard (J208M / J211) 310B / 302B US32D RO
2 Astragal (R3E734) 29310CV PE
2 Adhesive Gasketing (R0Y154) S773BL PE
1 Rain Guard (R0Y976) 346C PE
2 Auto Door Bottom (R0Y346) 434ARL PE https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954045, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033824,212032499, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212002982, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212002982, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079030,168873923, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212005379, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948678,168624536, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211948473,167999461,168612583, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180637617, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211975319,211975293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033481, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033481, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=157406442, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212034638,212034901, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212002982, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079030,168873932, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079031,168873901, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212037999,212042577, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043211,212042892, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043211,212042641, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043774,212043623, DOOR HARDWARE SCHEDULE 9
2 Sweep (R0Y416) 18061CNB PE
1 Threshold (outswing door) 273x224AFGT PE
2 Frame Harness QC-C1500P MK
Power transfers shared by electric panic and reactivation sensor wiring (reactivation sensors provided by section 08 71 13).
Edge guards at wood doors only.
Set: 11.0
Doors: 851009A, 851009B
1 All Hardware BY DOOR SUPPLIER
Set: 12.0
Doors: 851044
(A51331BxHGxAS)
HG315 CTP AS 630 MR
2 Electric Power Transfer CEPT-10 630 SU
1 Exit Device (Type 8, 01 E04) 7160 LBR MELR EO ECK1 630 YA
1 Exit Device (Type 8, 08/09 E04) 7160 LBR MELR AU627F ECK1 630 YA
1 Rim Cylinder (E09261) K680 626 YA
1 Permanent Core SFIC type, F keyway 7-pin BE
2 Kick Plate (J102) K1050 10" BEV CSK US32D RO
2 Floor Stop (L02121) 470 US26D RO
2 Edge Guard (J208M / J211) 310B / 302B US32D RO
2 Astragal (R3E734) 29310CV PE
2 Adhesive Gasketing (R0Y154) S773BL PE
2 Auto Door Bottom (R0Y346) 434ARL PE
2 Frame Harness QC-C1500P MK
Power transfers shared by electric panic and reactivation sensor wiring (reactivation sensors provided by section 08 71 13).
https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043291,212042295, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212042136,212041830, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954233, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954242, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033225, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=180637617, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211975319,211975293, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033043, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033043, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212034638,212034901, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212002982, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079030,168873932, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079031,168873901, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212037999,212042577, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043211,212042892, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212043774,212043623, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954233, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954242, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212033225, DOOR HARDWARE SCHEDULE 10
Set: 13.0
Doors: 851009
1 Pivot Set (C07042) 127-3/4 626 RF
1 Privacy Lock (F19) 8265 ALP US32D SA
1 Kick Plate (J102) K1050 10" BEV CSK US32D RO
1 Mop Plate (J103) K1050 6" BEV CSK US32D RO
1 Wall Stop (L02101) 401 US26D RO
1 Emergency Stop (A1882) DS-6 US26D MK
Mop plate at inswinging doors only.
Stone threshold by other trades.
END OF SECTION 080671
https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=167999461,168612583, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212035985,212036527, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211868059,211871330, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212002982, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212002982, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=212079030,168873923, https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=211954341,
| PART 1 - GENERAL |
| 1.1 RELATED DOCUMENTS |
| A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this Section. |
| 1.2 SUMMARY |
| A. This Section references specification sections relating to commercial door hardware for the following: |
| 1. Swinging doors. |
| 2. Sliding Doors. |
| 3. Other doors to the extent indicated. |
| B. Commercial door hardware includes, but is not necessarily limited to, the following: |
| 1. Mechanical door hardware. |
| 2. Electromechanical and access control door hardware. |
| 3. Electromechanical and access control door hardware power supplies, back-ups and surge protection. |
| 4. Automatic operators. |
| 5. Cylinders specified for doors in other sections. |
| C. Related Sections: |
| 5. Division 28 Section “Access Control Hardware Devices”. |
| D. Codes and References: Comply with the version year adopted by the Authority Having Jurisdiction. |
| 1. ANSI A117.1 - Accessible and Usable Buildings and Facilities. |
| 2. ICC/IBC - International Building Code. |
| 3. NFPA 70 - National Electrical Code. |
| 4. NFPA 80 - Fire Doors and Windows. |
| 5. NFPA 101 - Life Safety Code. |
| 6. NFPA 105 - Installation of Smoke Door Assemblies. |
| 7. State Building Codes, Local Amendments. |
E. Standards: Reference Related Sections for requirements regarding compliance with applicable industry standards.
| 1.3 SUBMITTALS |
| A. Product Data: Manufacturer's product data sheets including installation details, material descriptions, dimensions of individual components and profiles, operational descriptions and finishes. |
| B. Door Hardware Schedule: Prepared by or under the supervision of supplier, detailing fabrication and assembly of door hardware, as well as procedures and diagrams. Coordinate the final Door Hardware Schedule with doors, frames, and related work to e... |
| 1. Format: Comply with scheduling sequence and vertical format in DHI's "Sequence and Format for the Hardware Schedule." |
| 2. Organization: Organize the Door Hardware Schedule into door hardware sets indicating complete designations of every item required for each door or opening. Organize door hardware sets in same order as in the Door Hardware Sets at the end of Part 3.... |
| 3. Content: Include the following information: |
| a. Type, style, function, size, label, hand, and finish of each door hardware item. |
| b. Manufacturer of each item. |
| c. Fastenings and other pertinent information. |
| d. Location of door hardware set, cross-referenced to Drawings, both on floor plans and in door and frame schedule. |
| e. Explanation of abbreviations, symbols, and codes contained in schedule. |
| f. Mounting locations for door hardware. |
| g. Door and frame sizes and materials. |
4. Submittal Sequence: Submit the final Door Hardware Schedule at earliest possible date, particularly where approval of the Door Hardware Schedule must precede fabrication of other work that is critical in the Project construction schedule. Include P...
| C. Keying Schedule: Prepared under the supervision of the Owner, separate schedule detailing final keying instructions for locksets and cylinders in writing. Include keying system explanation, door numbers, key set symbols, hardware set numbers and sp... |
| D. Product Test Reports: Indicating compliance with cycle testing requirements, based on evaluation of comprehensive tests performed by manufacturer and witnessed by a qualified independent testing agency. |
| E. Operating and Maintenance Manuals: Provide manufacturers operating and maintenance manuals for each item comprising the complete door hardware installation in quantity as required in Division 01, Closeout Submittals. The manual to include the name,... |
| F. Warranties and Maintenance: Special warranties and maintenance agreements specified in the Related Sections. |
| 1.4 DELIVERY, STORAGE, AND HANDLING |
| A. Inventory door hardware on receipt and provide secure lock-up and shelving for door hardware delivered to Project site. Do not store electronic access control hardware, software or accessories at Project site without prior authorization. |
| B. Tag each item or package separately with identification related to the final Door Hardware Schedule, and include basic installation instructions with each item or package. |
| C. Deliver, as applicable, permanent keys, cylinders, cores, access control credentials, software and related accessories directly to Owner via registered mail or overnight package service. Instructions for delivery to the Owner shall be established a... |
| 1.5 WARRANTY |
| A. General Warranty: Reference Division 01, General Requirements. Special warranties specified in this Article shall not deprive Owner of other rights Owner may have under other provisions of the Contract Documents and shall be in addition to, and run... |
| 1.6 MAINTENANCE SERVICE |
| A. Maintenance Tools and Instructions: Furnish a complete set of specialized tools and maintenance instructions as needed for Owner's continued adjustment, maintenance, and removal and replacement of door hardware. |
| PART 2 - PRODUCTS |
| 2.1 SCHEDULED DOOR HARDWARE |
| A. Refer to “PART 3 – EXECUTION” for required specification sections. |
| PART 3 - EXECUTION |
| 3.1 DOOR HARDWARE SETS |
| A. The door hardware sets represent the design intent and direction of the owner and architect. They are a guideline only and should not be considered a detailed hardware schedule. Discrepancies, conflicting hardware and missing items should be brough... |
| 1. Quantities listed are for each pair of doors, or for each single door. |
| 2. The supplier is responsible for handing and sizing all products. |
| 3. Where multiple options for a piece of hardware are given in a single line item, the supplier shall provide the appropriate application for the opening. |
| 4. At existing openings with new hardware the supplier shall field inspect existing conditions prior to the submittal stage to verify the specified hardware will work as required. Provide alternate solutions and proposals as needed. |
| B. Products listed in the hardware sets shall be supplied by and in accordance with the requirements described in the specification section as noted for each item. |
| 5. Section 28 15 00 – Access Control Hardware Devices. |
C. Manufacturer’s Abbreviations:
File details come from the government source that posted it. Updated .