36C26019Q0373-007.pdf

Dept. of Veteran's Affairs CRRC Project, Seattle, WA

12630 - Spec Section

Summary of Tables (T-)

Furniture Specification

Printed: 1/31/2019

Spec Item

No.

MTR No. Furniture Selection Manufacturer Quantity

T-01 TT1

Training Table, Reconfigurable, Multiple

Shapes, HPL Steelcase 2

T-02 TT1

Training Table, Reconfigurable, Multiple

Shapes, HPL Steelcase 4

T-03 MT1 Magazine/Coffee Table, HPL Steelcase 2

T-04 MT1 Magazine/Coffee Table, HPL Steelcase 6

T-05 DT2 Dining Table, Leg Base, HPL Steelcase 1

T-06 MT2 Magazine/Coffee Table, Veneer OFS 1

T-07 DT1 Dining Table, HPL, Pedestal Base OFS 3

T-08 OT4

Occasional Tables, Drums, Cylinders and other Solid Shapes, HPL OFS 2

T-09 OT5

Occasional Tables, Drums, Cylinders and other Solid Shapes, Wood Veneer OFS 4

T-10 OT4

Occasional Tables, Drums, Cylinders and other Solid Shapes, HPL OFS 2

T-11 - NOT USED - 0

T-12 TT1

Training Table, Reconfigurable, Multiple

Shapes, HPL Steelcase 12

T-13 TT1

Training Table, Reconfigurable, Multiple

Shapes, HPL Steelcase 6

T-14 OT5

Occasional Tables, Drums, Cylinders and other Solid Shapes, Wood Veneer OFS 1

T-15 DT1 Dining Table, HPL, Pedestal Base Coalesse 3

T-16 DT1 Dining Table, HPL, Pedestal Base Coalesse 1

T-17 CT1 ConferenceTable, HPL Steelcase 1

Total Quantity 51

Section 12630: Summary-Tables

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-01 TT1 2 Training Table, Reconfigurable, Multiple Shapes, HPL

As manufactured by: Steelcase

Part Number (or Equal) Description

#AKF6030RTC

Top

Edge

Legs

ROOM QTY OWNER

133 2 VETVTR

Locations:

Edge - 6T07 WALNUT HEIGHTS

Top - 2TH7 WALNUT HEIGHTS (HPL)

Minimum Technical Requirements: Steelcase's Akira Flip-top, nesting table or equal.

• Surfaces - must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; grommet holes and covers for wire management; and linking/ganging capability to connect rows of tables for training and prevents sequenced power from becoming disconnected.

• Lifetime warranty.

• Base - Powder coated base finish; 3" dual wheel-locking casters (user side) for use on hard floor and carpet; integrated wire management into the leg; and one sided folding lever and mechanism release for tilt and nest operation (mechanism must latch when the surface is in use for safety.)

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Construction - Table top is made of 1" thick partical board or better with high pressure laminate surface, FPLS flat plastic edge. Flip, fixed height T-bases must be made of extruded and die-cast aluminum.

Base - 4799 PLATINUM METALLIC

Furniture Selection

Akira rectangular flip-top, nesting table; T-base; Fixed height; Casters; FPLS flat plastic edge

Size: 60"W x 30"D x28 1/2"H

Finish:

Section 12630: T-01

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-02 TT1 4 Training Table, Reconfigurable, Multiple Shapes, HPL

As manufactured by: Steelcase

Part Number (or Equal) Description

#AKF7230RTC

Top

Edge

Legs

ROOM QTY OWNER

133 4 VETCTR

Furniture Selection

Size: 72"W x 30"D

Finish:

Edge - 6T07 WALNUT HEIGHTS

Top - 2TH2 WALNUT HEIGHTS (HPL)

Locations:

Akira rectangular flip-top table; T-base; Fixed height; Casters; FPLS flat plastic edge

Minimum Technical Requirements: Steelcase's Akira Flip-top, nesting table or equal.

• Surfaces - must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; grommet holes and covers for wire management; and linking/ganging capability to connect rows of tables for training and prevents sequenced power from becoming disconnected.

• Base - Powder coated base finish; 3" dual wheel-locking casters (user side) for use on hard floor and carpet; integrated wire management into the leg; and one sided folding lever and mechanism release for tilt and nest operation (mechanism must latch when the surface is in use for safety.)

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Lifetime warranty.

Base - 4799 PLATINUM METALLIC

• Construction - Table top is made of 1" thick partical board or better with high pressure laminate surface, FPLS flat plastic edge. Flip, fixed height T-bases must be made of extruded and die-cast aluminum.

Section 12630: T-02

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-03 MT1 2 Magazine/Coffee Table, HPL

As manufactured by: Steelcase

Each to Consist of:

Part Number (or Equal) Qty Description

#TS4THR2424 1

Part Number (or Equal) Qty Description

#TS4TCOF22 2

Similar to image - shorter 16" High Base

Top

Edge

Base

ROOM QTY OWNER

130 1 VETCTR

131 1 VETCTR

Base Finish: 4799 PLATINUM METALLIC

Locations:

Minimum Technical Requirements: Steelcase's 24" square pedestal base coffee table or equal.

• Surfaces - must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners. Plastic edge must match surface laminate (HPL).

• Base - Powder coat base finish; glides on the base to move on carpet or hard floors without marring.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Limited lifetime warranty.

Size: 22"Dia x 16"H

Size: 24"W x 24"D x 1 1/8" Thick

Furniture Selection

Square Table Top; High pressure laminate; 1 1/8" Thick

Coffee table base

Finish:

Edge Finish: 6T07 WALNUT HEIGHTS

Top Surface: 2TH7 WALNUT HEIGHTS (HPL)

Section 12630: T-03

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-04 MT1 6 Magazine/Coffee Table, HPL

As manufactured by: Steelcase

Each to Consist of:

Part Number (or Equal) Qty Description

#TS4TLDR24 1

Part Number (or Equal) Qty Description

#TS4TCOF22 2

Top

Edge

Base

ROOM QTY OWNER ROOM QTY OWNER

125 1 VETCTR 134 1 VETCTR

126 1 VETCTR 135 1 VETCTR

132 1 VETCTR 138 1 VETCTR

Furniture Selection

Locations:

Size: 22"Dia x 16"H

Base Finish: 4799 PLATINUM METALLIC

Minimum Technical Requirements: Steelcase's 24" round pedestal base coffee table or equal.

• Surfaces - must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners. Plastic edge must match surface laminate (HPL).

• Base - Powder coat base finish; glides on the base to move on carpet or hard floors without marring.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Limited lifetime warranty.

Round Table Top; Low pressure laminate

Coffee table base

Finish:

Edge Finish: 6677 CHOCOLATE WALNUT

Top Surface: 264L CHOCOLATE WALNUT (LPL)

Size: 24"Dia x 1 1/8" Thick

Section 12630: T-04

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-05 DT2 1 Dining Table, Leg Base, HPL

As manufactured by: Steelcase

Each to Consist of:

Part Number (or Equal) Qty Description

#BFRR3672 1

Part Number (or Equal) Qty Description

#TS7WKSPT39 1

Part Number (or Equal) Qty Description

#BT26 2

Top

Edge

Base

ROOM QTY OWNER

122 1 VETCTR

Locations:

Size: 26"W

Finish: 7360 MERLE

• Surfaces - must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; Square edge profile.

• Base - Powder coat base finish; leveling glides that won’t scratch or mar the floor.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Limited lifetime warranty.

Furniture Selection

Edge Finish: 6T07 WALNUT HEIGHTS

Top Surface: 2TH7 WALNUT HEIGHTS

Universal rectangular table; Square edge profile

Reinforcing channel

T-Base

Minimum Technical Requirements: Steelcase's Universal Rectangular Table or equal.

Size: 39"W

Finish:

Size: 72"W x 36"D

Section 12630: T-05

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-06 MT2 1 Magazine/Coffee Table, Veneer

As manufactured by: OFS

Part Number (or Equal) Description

#BK-22RD22V

Wood Finish

ROOM QTY OWNER

139 1 VETCTR

Locations:

Furniture Selection

Beck End Table with Veneer Top

Size: 22"W x 22"D x 22"H

Finish: MNW ROOT (Natural Walnut)

Minimum Technical Requirements: OFS' Beck End Table or equal.

• Surfaces - Must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.

• Base - Glides on each leg to move on carpet or hard floors without marring.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Limited lifetime warranty.

• Meet AWI (American Woodwork Institute) standards for joinery techniques.

• Anti-microbial finish applied to any finished exposed wood surfaces.

Section 12630: T-06

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-07 DT1 3 Dining Table, HPL, Pedestal Base

As manufactured by: OFS

Each to Consist of:

Part Number (or Equal) Qty Description

#ASC26 1

Part Number (or Equal) Qty Description

#NS-914976 1

Similar to image

Top

Base

ROOM QTY OWNER ROOM QTY OWNER

109 1 CRRC 139 1 VETCTR

205 1 CRRC

Furniture Selection

Glides - Black

Carolina Intermix Deuce Static Center Column Base for 30"D Top

Finish:

Locations:

Size: 25.75" H

Size: 29.5"W x 29.5"D x 1.5"H

Corian Top Finish: Modern White (MWS)

Base - SGLD Gold

Custom Corian Top Round

Minimum Technical Requirements: OFS' custom Carolina Intermix Table with Deuce Column Base and Corian

Top or equal.

• Surfaces - Solid surface must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; Flat eased edge profile.

• Base - Powder coat base finish; leveling glides that won’t scratch or mar the floor.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Limited lifetime warranty.

Section 12630: T-07

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-08 OT4 2 Occasional Tables, Drums, Cylinders and other Solid Shapes, HPL

As manufactured by: OFS

Part Number (or Equal) Description

#WF-T20RD22H

Top

Base

ROOM QTY OWNER

140 2 VETCTR

Locations:

Solid Surface - CAMEO WHITE

Minimum Technical Requirements: OFS' Wyre Trapezoid Frame Round End Table or equal.

• Surfaces - Solid surface must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.

• Base - Powder coat base finish; as needed glides on the base to move on carpet or hard floors without marring.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Limited lifetime warranty.

Base - SGLD Gold

Furniture Selection

Wyre Trapezoid Frame Round End Table with Solid Surface

Size: 20"W x 20"D x 22"H

Section 12630: T-08

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-09 OT5 4 Occasional Tables, Drums, Cylinders and other Solid Shapes, Wood Veneer

As manufactured by: OFS

Part Number (or Equal) Description

#DNR-20ET

Wood Finish

ROOM QTY OWNER

140 4 VRTCTR

Locations:

Furniture Selection

Denro Solid Wood End Table

Size: 20"H

Wood Finish: WOAK White Oak, Torched

Minimum Technical Requirements: OFS' Denro Solid Wood End Table or equal.

• Surfaces - must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.

• (As needed) glides on the base to move on carpet or hard floors without marring.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Limited lifetime warranty.

• Anti-microbial finish applied to any finished exposed wood surfaces.

• Meet AWI (American Woodwork Institute) standards for joinery techniques.

Section 12630: T-09

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-10 OT4 2 Occasional Tables, Drums, Cylinders and other Solid Shapes, HPL

As manufactured by: OFS

Part Number (or Equal) Description

#WF-T20RD22H

Top

Base

ROOM QTY OWNER

109 2 CRRC

Locations:

Solid Surface - Modern White (MWS)

Minimum Technical Requirements: OFS' Wyre Trapezoid Frame Round End Table or equal.

• Surfaces - Solid surface must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.

• Base - Powder coat base finish; as needed glides on the base to move on carpet or hard floors without marring.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Limited lifetime warranty.

Base - Heron (HERN)

Furniture Selection

Size: 20"W x 20"D x 22"H

Finish:

Wyre Trapezoid Frame Round End Table with Solid Surface

Section 12630: T-10

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-12 TT1 12 Training Table, Reconfigurable, Multiple Shapes, HPL

As manufactured by: Steelcase

Part Number (or Equal) Description

#AKF6030RTC

Top

Edge

Legs

ROOM QTY OWNER ROOM QTY OWNER

211 2 CRRC 224 6 CRRC

212 2 CRRC 227 2 CRRC

Locations:

Top - 2TH2 FAWN CYPRESS (HPL)

Minimum Technical Requirements: Steelcase's Akira Flip-top, nesting table or equal.

• Surfaces - must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; grommet holes and covers for wire management; and linking/ganging capability to connect rows of tables for training and prevents sequenced power from becoming disconnected.

• Base - Powder coat base finish; dual wheel-locking casters; integrated wire management into the leg; and one sided mechanism release for tilt and nest operation.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Lifetime warranty.

• Construction - Table top is made of 1" thick partical board or better with high pressure laminate surface, FPLS flat plastic edge. Flip, fixed height T-bases must be made of extruded and die-cast aluminum.

Edge - 6T02 FAWN CYPRESS

Base - 4799 PLATINUM METALLIC

Furniture Selection

Akira rectangular flip-top table; T-base; Fixed height; Casters; FPLS flat plastic edge

Size: 60"W x 30"D

Section 12630: T-12

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-13 TT1 6 Training Table, Reconfigurable, Multiple Shapes, HPL

As manufactured by: Steelcase

Part Number (or Equal) Description

#AKF7230RTC

Top

Edge

Legs

ROOM QTY OWNER ROOM QTY OWNER

211 2 CRRC 227 2 CRRC

212 2 CRRC

Locations:

Top - 2TH2 FAWN CYPRESS (HPL)

Minimum Technical Requirements: Steelcase's Akira Flip-top, nesting table or equal.

• Surfaces - must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; grommet holes and covers for wire management; and linking/ganging capability to connect rows of tables for training and prevents sequenced power from becoming disconnected.

• Base - Powder coat base finish; dual wheel-locking casters; integrated wire management into the leg; and one sided mechanism release for tilt and nest operation.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Lifetime warranty.

• Construction - Table top is made of 1" thick partical board or better with high pressure laminate surface, FPLS flat plastic edge. Flip, fixed height T-bases must be made of extruded and die-cast aluminum.

Edge - 6T02 FAWN CYPRESS

Base - 4799 PLATINUM METALLIC

Furniture Selection

Akira rectangular flip-top table; T-base; Fixed height; Casters; FPLS flat plastic edge

Size: 72"W x 30"D

Section 12630: T-13

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-14 OT5 1 Occasional Tables, Drums, Cylinders and other Solid Shapes, Wood Veneer

As manufactured by: OFS

Part Number (or Equal) Description

#DNR-20ET

Wood Finish

ROOM QTY OWNER

205 1 CRRC

Furniture Selection

Size: 20"H

Wood Finish: Walnut, Torched

Denro Solid Wood End Table

Locations:

Minimum Technical Requirements: OFS' Denro Solid Wood End Table or equal.

• Surfaces - must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.

• (As needed) glides on the base to move on carpet or hard floors without marring.

• Anti-microbial finish applied to any finished exposed wood surfaces.

• Meet AWI (American Woodwork Institute) standards for joinery techniques.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Limited lifetime warranty.

Section 12630: T-14

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-15 DT1 3 Dining Table, HPL, Pedestal Base

As manufactured by: Coalesse

Part Number (or Equal) Description

#COLAGTW*

Similar - no power/grommets

Top

Base

ROOM QTY OWNER

214 3 CRRC

Locations:

Top - Modern White

Minimum Technical Requirements: Coalesse's Custom Lagunitas Rectangular Table or equal.

• Surfaces - Solid Surface must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; Flat eased edge profile.

• Base - Powder coat pedestal base finish; leveling glides that won’t scratch or mar the floor.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Limited lifetime warranty.

Edge - Eased Edge

Base - Smooth Metallic 4799 - PLATINUM METALLIC

Furniture Selection

Custom Coalesse Lagunitas rectangular table; *Special 36x30 Corian solid surface top; No device (reference Document #00018782)

Size: 36"W x 30"D x 28.5"H

Section 12630: T-15

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-16 DT1 1 Dining Table, HPL, Pedestal Base

As manufactured by: Coalesse

Part Number (or Equal) Description

#H35-T3042L*

Top

Base

ROOM QTY OWNER

214 1 CRRC

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Limited lifetime warranty.

Locations:

Base - 4018 SILVER METALLIC

Furniture Selection

Size: 30"Dia x 42"H

Finish:

Edge - Eased Edge

Top - Modern White

Custom Coalesse Enea Café table; Special 30" diameter 1/2" thick Corian solid surface top; Bar height (reference Document #00018782)

Minimum Technical Requirements: Coalesse's Custom Enea Café Table or equal.

• Surfaces - Solid surface must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; Flat eased edge profile.

• Base - Café height option at 42"; powder coat pedestal base finish; leveling glides that won’t scratch or mar the floor.

Section 12630: T-16

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

T-17 CT1 1 ConferenceTable, HPL

As manufactured by: Steelcase

Part Number (or Equal) Description

#VTAMRT

Edge Finish - Plastic - PG1 6T02 - FAWN CYPRESS

Case Finish - Textured Woodgrain HPL 2TH2- FAWM CYPRESS (HPL)

Case Edge Finish - Plastic - PG1 6T02 - FAWN CYPRESS

Case Top Surface - Textured Woodgrain HPL 2TH2- FAWM CYPRESS (HPL)

Case Top Edge - Plastic - PG1 6T02 - FAWN CYPRESS

Leg Finish - Smooth Metallic 4799 - PLATINUM METALLIC

Shroud Finish - Smooth Metallic 4799 - PLATINUM METALLIC

Bracket Finish - Smooth Metallic 4799 - PLATINUM METALLIC

Minimum Technical Requirements: Steelcase's Verb Action Table or equal.

• Surfaces - must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; power/USB/data/voice port options with the option of grommet hole(s) and cover, Power Island, troughs or power cove(s); power options to be corded or hardwired.

• Base - Powder coat base finish; wire management underneath conference table; leveling glides for carpet or hard floors.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Minimum 12 year warranty.

Top Surface - Textured Woodgrain HPL 2TH2- FAWM CYPRESS (HPL)

Furniture Selection

Verb Active rectangular Media Table; 2 Glide access leg; 3 Outlet media case power; User power channel (3 outlet, 1 USB & 3 knockouts); Standard NEMA

5-15 3 -prong power plug type; No side dock & hook; No stow hooks

Size: 87"W x 34"D

Section 12630: T-17

Furniture Specification

Printed: 1/31/2019

Spec Item No.: T-17

Top/Case Edge Legs/Brackets

ROOM QTY OWNER

215A 1 CRRC

Locations:

Section 12630: T-17