36C26019Q0373-005.pdf

Dept. of Veteran's Affairs CRRC Project, Seattle, WA

12640 - Spec Section

Summary of Desks (DSK-, WK-)

Furniture Specification

Printed: 1/31/2019

Spec Item

No.

MTR No. Furniture Selection Manufacturer Quantity

DSK-01 HAW3

Height Adjustable Work Table, sit to stand, Electric, HPL Steelcase 9

DSK-02A HAW3

Height Adjustable Work Table, sit to stand, Electric, HPL Steelcase 1

DSK-02B HAW3

Height Adjustable Work Table, sit to stand, Electric, HPL Steelcase 1

DSK-02C HAW3

Height Adjustable Work Table, sit to stand, Electric, HPL Steelcase 1

DSK-03 HAW3

Height Adjustable Work Table, sit to stand, Electric, HPL Steelcase 10

DSK-04 MD2 10 Steelcase 10

DSK-05 MD1

Modular Desking System- HPL, Freestanding Steelcase 1

WK-01A -

Right-Hand Workstation Configuration

(6x6) SwiftSpace 15

WK-01B - Left-Hand Workstation Configuration (6x6) SwiftSpace 16

Total Quantity 64

Section 12640: Summary-Desks

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

DSK-01 HAW3 9 Height Adjustable Work Table, sit to stand, Electric, HPL

As manufactured by: Steelcase

Each to Consist of:

Part Number (or Equal) Qty Description

#OLELRQ - 2964 1

Finish:

Part Number (or Equal) Qty Description

#OLCB

Top Edge Base

• Electrical – 120V, 60Hz, Single phase, 10% duty cycle. Maximum draw 4 amps under full load, idle current is typically 20mA; 6'-0” minimum power cord; 3-stage synchronized lifting columns with integral shrouding; lifting columns controlled by “master” and “slave” motors via a single switch;

wire management trough required.

• All assemblies meet or exceed ANSI/BIFMA standards.

• All electronics are to be certified by TUV to UL-73 and CSA C22.2.

• Height Range - Electric height adjustability range between 24” – 52”; push button height adjustability.

Furniture Selection

Ology extended height modular rectangle desk; Square corner; Simple touch controller; Grommet; 1/2" glides; North American Power

Minimum Technical Requirements: Steelcase's Ology Extended Height Modular Rectangle Desk or equal.

Top Surface: Woodgrain HPL 2HAT - ACACIA (HPL)

Edge Finish: Plastic - PG1 6213 - ACACIA

Base Finish: Smooth Metallic 4799 - PLATINUM METALLIC

Corner: Square Corner

Size: 64"W x 29"D

Ology cable basket

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Warranty minimum of 10 years to Lifetime

• Surface - Worksurfaces shall be 1 3/16" or within 1/2" varience; HPL finish; must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; to allow work tools to be attached.

• Height Adjustable Base - A rigid design to maximize floor space and provide full clearance under the worksurface without sacrificing stability; minimum of 220 lbs. distributed load bearing capacity per table; glides have .5” of height adjustment for surface leveling on uneven floors. Glides to not scratch or mar flooring either carpet or hard flooring.

Section 12640: DSK-01

Furniture Specification

Printed: 1/31/2019

Spec Item No.: DSK-01

ROOM QTY OWNER ROOM QTY OWNER

125 1 VETCTR 132 1 VETCTR

126 1 VETCTR 134 1 VETCTR

127 1 VETCTR 135 1 VETCTR

128 1 VETCTR 136 1 VETCTR

138 1 VETCTR

Locations:

Section 12640: DSK-01

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

DSK-02A HAW3 1 Height Adjustable Work Table, sit to stand, Electric, HPL

As manufactured by: Steelcase

Each to Consist of:

Part Number (or Equal) Qty Description

#OLELRQ - 2934 1

Finish:

Part Number (or Equal) Qty Description

#OLCB 1

Top Edge Base

Furniture Selection

Minimum Technical Requirements: Steelcase's Ology Extended Height Modular Rectangle Desk or equal.

• Surface - Worksurfaces shall be 1 3/16" or within 1/2" varience; HPL finish; must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; to allow work tools to be attached.

• Height Adjustable Base - A rigid design to maximize floor space and provide full clearance under the worksurface without sacrificing stability; minimum of 220 lbs. distributed load bearing capacity per table; glides have .5” of height adjustment for surface leveling on uneven floors. Glides to not scratch or mar flooring either carpet or hard flooring.

• Height Range - Electric height adjustability range between 24” – 52”; push button height adjustability.

Ology cable basket

Ology extended height modular rectangle desk; Square corner; Simple touch controller; Grommet; 1/2" glides; North American Power

Size: 34"W x 29"D

Top Surface: Woodgrain HPL 2HAN - ASH NOCE (HPL)

Edge Finish: Plastic - PG1 6707 - ASH NOCE

Base Finish: Smooth Metallic 4799 - PLATINUM METALLIC

Corner: Square Corner

• Electrical – 120V, 60Hz, Single phase, 10% duty cycle. Maximum draw 4 amps under full load, idle current is typically 20mA; 6'-0” minimum power cord; 3-stage synchronized lifting columns with integral shrouding; lifting columns controlled by “master” and “slave” motors via a single switch;

wire management trough required.

• All electronics are to be certified by TUV to UL-73 and CSA C22.2.

• All assemblies meet or exceed ANSI/BIFMA standards.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Warranty minimum of 10 years to Lifetime

Section 12640: DSK-02A

Furniture Specification

Printed: 1/31/2019

Spec Item No.: DSK-02A

ROOM QTY OWNER

115 1 CRRC

Section 12640: DSK-02A

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

DSK-02B HAW3 1 Height Adjustable Work Table, sit to stand, Electric, HPL

As manufactured by: Steelcase

Each to Consist of:

Part Number (or Equal) Qty Description

#OLELRQ - 2346

Finish:

Part Number (or Equal) Qty Description

#OLCB 1

Top Edge Base

Top Surface: Woodgrain HPL 2HAN - ASH NOCE (HPL)

Furniture Selection

Size: 46"W x 23"D

Ology extended height modular rectangle desk; Square corner; Simple touch controller; Grommet; 1/2" glides; North American Power

Minimum Technical Requirements: Steelcase's Ology Extended Height Modular Rectangle Desk or equal.

Edge Finish: Plastic - PG1 6707 - ASH NOCE

Base Finish: Smooth Metallic 4799 - PLATINUM METALLIC

Corner: Square Corner

Ology cable basket

• Surface - Worksurfaces shall be 1 3/16" or within 1/2" varience; HPL finish; must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; to allow work tools to be attached.

• Height Adjustable Base - A rigid design to maximize floor space and provide full clearance under the worksurface without sacrificing stability; minimum of 220 lbs. distributed load bearing capacity per table; glides have .5” of height adjustment for surface leveling on uneven floors. Glides to not scratch or mar flooring either carpet or hard flooring.

• Height Range - Electric height adjustability range between 24” – 52”; push button height adjustability.

• Electrical – 120V, 60Hz, Single phase, 10% duty cycle. Maximum draw 4 amps under full load, idle current is typically 20mA; 6'-0” minimum power cord; 3-stage synchronized lifting columns with integral shrouding; lifting columns controlled by “master” and “slave” motors via a single switch;

wire management trough required.

• All electronics are to be certified by TUV to UL-73 and CSA C22.2.

• All assemblies meet or exceed ANSI/BIFMA standards.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

Section 12640: DSK-02B

Furniture Specification

Printed: 1/31/2019

Spec Item No.: DSK-02B

ROOM QTY OWNER

205 1 CRRC

Section 12640: DSK-02B

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

DSK-02C HAW3 1 Height Adjustable Work Table, sit to stand, Electric, HPL

As manufactured by: Steelcase

Each to Consist of:

Part Number (or Equal) Qty Description

#OLELRQ - 2946 1

Finish:

Part Number (or Equal) Qty Description

#OLCB 1

Top Edge Base

Top Surface: Woodgrain HPL 2HAN - ASH NOCE (HPL)

Furniture Selection

Size: 46"W x 29"D

Ology extended height modular rectangle desk; Square corner; Simple touch controller; Grommet; 1/2" glides; North American Power

• Height Range - Electric height adjustability range between 24” – 52”; push button height adjustability.

Edge Finish: Plastic - PG1 6707 - ASH NOCE

Base Finish: Smooth Metallic 4799 - PLATINUM METALLIC

Corner: Square Corner

Minimum Technical Requirements: Steelcase's Ology Extended Height Modular Rectangle Desk or equal.

• Surface - Worksurfaces shall be 1 3/16" or within 1/2" varience; HPL finish; must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; to allow work tools to be attached.

• Height Adjustable Base - A rigid design to maximize floor space and provide full clearance under the worksurface without sacrificing stability; minimum of 220 lbs. distributed load bearing capacity per table; glides have .5” of height adjustment for surface leveling on uneven floors. Glides to not scratch or mar flooring either carpet or hard flooring.

Ology cable basket

• Electrical – 120V, 60Hz, Single phase, 10% duty cycle. Maximum draw 4 amps under full load, idle current is typically 20mA; 6'-0” minimum power cord; 3-stage synchronized lifting columns with integral shrouding; lifting columns controlled by “master” and “slave” motors via a single switch;

wire management trough required.

• All electronics are to be certified by TUV to UL-73 and CSA C22.2.

• All assemblies meet or exceed ANSI/BIFMA standards.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

Section 12640: DSK-02C

Furniture Specification

Printed: 1/31/2019

Spec Item No.: DSK-02C

ROOM QTY OWNER

205 1 CRRC

Section 12640: DSK-02C

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

DSK-02D HAW3 1 Height Adjustable Work Table, sit to stand, Electric, HPL

As manufactured by: Steelcase

Each to Consist of:

Part Number (or Equal) Qty Description

#OLELRQ - 2940 1

Finish:

Part Number (or Equal) Qty Description

#OLCB 1

Top Edge Base

• Warranty minimum of 10 years to Lifetime

Top Surface: Woodgrain HPL 2HAN - ASH NOCE (HPL)

Ology extended height modular rectangle desk; Square corner; Simple touch controller; Grommet; 1/2" glides; North American Power

Ology cable basket

Furniture Selection

Size: 40"W x 29"D

Edge Finish: Plastic - PG1 6707 - ASH NOCE

Base Finish: Smooth Metallic 4799 - PLATINUM METALLIC

Corner: Square Corner

Minimum Technical Requirements: Steelcase's Ology Extended Height Modular Rectangle Desk or equal.

• Surface - Worksurfaces shall be 1 3/16" or within 1/2" varience; HPL finish; must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; to allow work tools to be attached.

• Height Adjustable Base - A rigid design to maximize floor space and provide full clearance under the worksurface without sacrificing stability; minimum of 220 lbs. distributed load bearing capacity per table; glides have .5” of height adjustment for surface leveling on uneven floors. Glides to not scratch or mar flooring either carpet or hard flooring.

• Height Range - Electric height adjustability range between 24” – 52”; push button height adjustability.

• Electrical – 120V, 60Hz, Single phase, 10% duty cycle. Maximum draw 4 amps under full load, idle current is typically 20mA; 6'-0” minimum power cord; 3-stage synchronized lifting columns with integral shrouding; lifting columns controlled by “master” and “slave” motors via a single switch;

wire management trough required.

• All electronics are to be certified by TUV to UL-73 and CSA C22.2.

• All assemblies meet or exceed ANSI/BIFMA standards.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

Section 12640: DSK-02D

Furniture Specification

Printed: 1/31/2019

Spec Item No.: DSK-02D

ROOM QTY OWNER

137 1 VETCTR

Section 12640: DSK-02D

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

DSK-03 HAW3 10 Height Adjustable Work Table, sit to stand, Electric, HPL

As manufactured by: Steelcase

Each to Consist of:

Part Number (or Equal) Qty Description

#OLELRQ - 2952 1

Finish:

Part Number (or Equal) Qty Description

#OLCB 1

Top Edge Base

Furniture Selection

Corner: Square Corner

Top Surface: Woodgrain HPL 2HAN - ASH NOCE (HPL)

Edge Finish: Plastic - PG1 6707 - ASH NOCE

Ology extended height modular rectangle desk; Square corner; Simple touch controller; Grommet; 1/2" glides; North American Power

Size: 52"W x 29"D

Minimum Technical Requirements: Steelcase's Ology Extended Height Modular Rectangle Desk or equal.

Base Finish: Smooth Metallic 4799 - PLATINUM METALLIC

Ology cable basket

• Surface - Worksurfaces shall be 1 3/16" or within 1/2" varience; HPL finish; must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners; to allow work tools to be attached.

• Height Adjustable Base - A rigid design to maximize floor space and provide full clearance under the worksurface without sacrificing stability; minimum of 220 lbs. distributed load bearing capacity per table; glides have .5” of height adjustment for surface leveling on uneven floors. Glides to not scratch or mar flooring either carpet or hard flooring.

• Height Range - Electric height adjustability range between 24” – 52”; push button height adjustability.

• Electrical – 120V, 60Hz, Single phase, 10% duty cycle. Maximum draw 4 amps under full load, idle current is typically 20mA; 6'-0” minimum power cord; 3-stage synchronized lifting columns with integral shrouding; lifting columns controlled by “master” and “slave” motors via a single switch;

wire management trough required.

• All electronics are to be certified by TUV to UL-73 and CSA C22.2.

• All assemblies meet or exceed ANSI/BIFMA standards.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

Section 12640: DSK-03

Furniture Specification

Printed: 1/31/2019

Spec Item No.: DSK-03

ROOM QTY OWNER

111 1 CRRC

120 1 CRRC

208 1 CRRC

209 1 CRRC

218 1 CRRC

220 1 CRRC

222 1 CRRC

223 1 CRRC

225 1 CRRC

226 1 CRRC

Section 12640: DSK-03

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

DSK-04 MD2 10 Modular Desking System- HPL tops with Metal Components, Freestanding

As manufactured by: Steelcase

Each to Consist of:

Part Number (or Equal) Qty Description

#WS2460 1

Part Number (or Equal) Qty Description

#TS7WKSPT54 1

Part Number (or Equal) Qty Description

#UADJ4 1

Top/Edge (SIM)

Base

Finish:

Top Surface: Woodgrain HPL 2HAN - ASH NOCE (HPL)

Edge Finish: Plastic - PG1 6707 - ASH NOCE

Size:

Finish: Legs - 4799 PLATINUM METALLIC

Corner: Square Corner

Size: 54"W

Reinforcing channel

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Contain a minimum 50% recycled content.

• Limited lifetime warranty.

• Meet ANSI/BIFMA supporting loads.

• Surface - HPL tops and components of minimum 1 3/16” thick particleboard or MDF with moisture balancing backing sheet (to match Ology Height Adjustable Desks), pre-drilled metal to metal connections, and minimum 3mm vinyl T-mold edge; must be cleanable with hospital grade germicides and bleach solutions without harm to finishes.

• Base - Four adjustable height legs with leveling glides that won’t scratch or mar the floor.

Size: 60"W x 24"D

Furniture Selection

24 x 60 Straight worksurface, full depth; Omit scallops

Adjustable height legs with glides (package of 4)

Minimum Technical Requirements: Steelcase's Worksurface with Avenir Height Adjustable Legs or equal.

Section 12640: DSK-04

Furniture Specification

Printed: 1/31/2019

Spec Item No.: DSK-04

ROOM QTY OWNER

111 1 CRRC

120 1 CRRC

208 1 CRRC

209 1 CRRC

218 1 CRRC

220 1 CRRC

222 1 CRRC

223 1 CRRC

225 1 CRRC

226 1 CRRC

Section 12640: DSK-04

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

DSK-05 MD1 1 Modular Desking System- HPL, Freestanding

As manufactured by: Steelcase

Part Number (or Equal) Description

#TS5HLDS2460

Top

Edge

Base

ROOM QTY OWNER

136 1 VETCTR

Furniture Selection

Shell Desk (return), High Pressure Laminate; Full height Modesty Panel; Two full end panels

Size: 60"W x 24"D

Top Surface: 2HAT ACACIA (HPL)

Edge Finish: 6213 - ACACIA

Finish: 2LAT ACACIA (LPL)

Locations:

Minimum Technical Requirements: Steelcase's Currency Rectangular Desk Shell or equal.

• Meet ANSI/BIFMA supporting loads.

• Limited lifetime warranty.

• Surface - HPL tops and components of minimum 1 3/16” thick particleboard or MDF with moisture balancing backing sheet (to match Ology Height Adjustable Desks), pre-drilled metal to metal connections, and minimum 3mm vinyl T-mold edge; must be cleanable with hospital grade germicides and bleach solutions without harm to finishes.

• Base - Two full end panels and full height modesty; leveling glides that won’t scratch or mar the floor.

• Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1-2001).

• Contain a minimum 50% recycled content.

Section 12640: DSK-05

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

WK-

01A/01B

- 1 Height adjustable workstations (Quote # WA-002D)

As manufactured by: SwiftSpace

• Shipping - The mobile workstation requires no assembly and will arrive from the manufacturer in two pieces: 66" high walls with a fixed worksurface attached and an electric height adjustable worksurface. The workstation must ship with a cardboard shipping sleeve for protection.

• Assembly - The workstation shall be engineered so that it can be set up and then folded down hundreds of times by anyone without the use of any tools with no loss of functionality.

• The Swiftspace "SHAPE" is an electric height adjustable workstation that can be used as a standalone workstation or incorporated into the walled system with the fixed height surface.

Mounted on the front underside of the unit (either left or right side), a single push button raises and lowers the worksurface between 27"-53". 3" Casters may be removed to lower the adjustment range. The worksurface folds down to a 24" width for storage and transport.

• Mobility - All workstations are completely mobile; once the units are in place, the 4" casters may be hidden with a slide-in caster cover.

• The integrated bottom rail of the station contains a concealed power/data trough for running cables. Each station contains a quick-connect/disconnect jumper cable, a receptacle box, and a duplex receptacle. The length of the jumper cable depends on the station wall length. The workstation must also come with a power/data trough attached to the fixed portion of the workstation leg. This ensures that power and data cables in the trough remain at a consistent height when the work-surface is moved up and down. The power/data trough must have a hinged door to give easy access to lay in both power and data. There must be a separate area in the trough, able to hold up to 40 cables.

• The unit shall be able to be installed and serviced directly by the user or any common furniture installer or laborer and not violate or void any product warranty. Installation will not require any tools or professional training and should take less than one minute.

• The workstation is MAS Green certified for low VOC emissions.

Furniture Selection

• Each station must have a cord/cable management box that is fastened to the bottom of the work-surface. The box must contain a surge protected power-bar with eight electrical outlets, which allows the user to plug in any cords for computers, monitors, etc. The box travels up and down with the work-surface keeping power and data cords in place. Only one power cord, 12 ft. in length and data cable will travel out of the box in a cable management spine, and be connected directly to the wall plugs or data plates for single user scenarios; or in multiple station run scenarios, have jumpers and a single whip that is connected to a J-box.

Minimum Technical Requirements: Swiftspace's Custom Summit 5x5 Electric Height Adjustable Mobile

Workstations or equal.

General Workstation Characteristics

Section 12640: WK-01A01B

Furniture Specification

Printed: 1/31/2019

Spec Item No.: WK-01A/01B

Warranty

• Limited lifetime warranty on all aluminum parts, hardware parts like posts, connectors and metal cantilevers. Laminate panels, casters, hinges, and the electric lifting mechanism shall be free of defects in materials and workmanship for a period of 5 years.

Workstation Dimensions

• Overall dimensions when set up 68" x 60".

• Overall height 66" both left and right wall.

• Height of the fixed worksurface is 29". Height of the electric height adjustable worksurface is 27"-

53".

• Upper panels are EZO tackable acoustic panels.

• All upper and lower panel inserts are integrated into the system by sliding then inside 20mm slots.

• Worksurfaces are to be 25mm thick high pressure laminate, with a particle board core and 1 mm edging; and a grommet hole, located on the back - center of the work-surface, to support a grommet mounted dual monitor arm.

Construction

• Frame is constructed of 40mm lightweight grey recycled content aluminum.

• Lower panels are 25mm thick high pressure laminate with a 45lb density particle board core, 2mm edging.

• Casters are 63.5mm in diameter with grey non-marking rubber wheels that swivel and lock.

• All connections are done using a cam lock dry fit system.

Section 12640: WK-01A01B

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

WK-01A - 15 Right-Hand Workstation Configuration (6x6)

As manufactured by: SwiftSpace

Each to Consist of:

Part Number (or Equal) Qty

SS90D6662L6654R-NSL*15

Part Number (or Equal) Qty

SHAPE - SSSHP2442S* 15

Part Number (or Equal) Qty

SSMAD-SM 15

Part Number (or Equal) Qty

SS+EZO 6x6 30

Part Number (or Equal) Qty

SSEZOT 6x6 30

Part Number (or Equal) Qty

SS+EZO5x5 15

Part Number (or Equal) Qty

SSEZOT Solo 5x5 15

Part Number (or Equal) Qty

SSEZOT Solo 5x5

Part Number (or Equal) Qty

SSACR58 15

Part Number (or Equal) Qty

SSBH1110 15

Description

Accessory Rail for 5 x5 - Panel F

Description

Binder Holder

Worksurface Size: 60"W (nom) x 24"D x 29"H

Laminate: Fawn Cypress

Trim Finish: Aluminum

Frame Finish: Platinum Metallic

Laminate: Fawn Cypress

Description

EZOBORD Cut Out: MN12 MIDNIGHT NAVY

Description

Solo EZO Upper Panel 5ft- Summit TOP- Push-In -Pattern Herringbone

EZOBORD Background: SG04 SILVER GRAY

Solo+ EZO Upper Panel 5ft - Panel F

EZOBORD Color: SG04 SILVER GRAY

Description

Solo EZO Upper Panel 5ft- Summit TOP

Description

Solo EZO Upper Panel 6ft-Summit TOP - Cut to size

Description

EZOBORD Color: SG04 SILVER GRAY

Custom Electric Height Adjustable Mobile Station

Size: 42"W x 24"D x 27"-53"H (range)

Dual Monitor Arm - Surface Mount

Description

Solo+ EZO Upper Panel 6ft - Cut to size - Panel A& B

Description

Furniture Selection

Description

Summit 5x5 - No Surface Right - Right Wall mod. to 62"W*

Panel Configuration Size: (R) 68"W x 66"H; (L) 60"W x 66"H

Frame Finish: Platinum Metallic

Section 12640: WK-01A

Furniture Specification

Printed: 1/31/2019

Spec Item No.: WK-01A

Part Number (or Equal) Qty

SSPPH 15

Part Number (or Equal) Qty

SSLPT139 30

Part Number (or Equal) Qty

SSU-BOX 15

Part Number (or Equal) Qty

SSHWDSTARTERD 10

Part Number (or Equal) Qty

SSHWDADDOND 21

Laminate Frame

ROOM QTY OWNER

215B 15 CRRC

Description

Hardwired Add-on - Double Box (Used for WK-01A &B)

Cable Holder U box Cable Holder

Description

Pen Holder

Description

Hardwired Starter - Double Box

Description

Description

Letter Paper Shelf

Section 12640: WK-01A

Furniture Specification

Printed: 1/31/2019

Spec Item

No. MTR No. Quantity

WK-01B - 16 Left-Hand Workstation Configuration (6x6)

As manufactured by: SwiftSpace

Each to Consist of:

Part Number (or Equal) Qty

SS90D6662L6654R-NSL*16

Part Number (or Equal) Qty

SHAPE - SSSHP2442S* 16

Part Number (or Equal) Qty

SSMAD-SM 16

Part Number (or Equal) Qty

SS+EZO5x5 16

Part Number (or Equal) Qty

SSEZOT Solo 5x5 16

Part Number (or Equal) Qty

SSEZOT Solo 5x5 6

Part Number (or Equal) Qty

SS+EZO 6x6 32

Part Number (or Equal) Qty

SSEZOT 6x6 32

Part Number (or Equal) Qty

SSACR58 16

Part Number (or Equal) Qty

SSBH1110 16

Accessory Rail for 5 x5 - Panel F

Description

Binder Holder

EZOBORD Cut Out: MN12 MIDNIGHT NAVY

EZOBORD Background: SG04 SILVER GRAY

EZOBORD Color: SG04 SILVER GRAY

Solo EZO Upper Panel 6ft-Summit TOP - Cut to size

Description

Description

Summit 5x5 - No Surface Left - Left Wall mod. to 62"W*

Panel Configuration Size: (L) 68"W x 66"H; (R) 60"W x 66"H

Worksurface Size: 60"W (nom) x 24"D x 29"H

Frame Finish: Platinum Metallic

Trim Finish: Aluminum

Laminate: Fawn Cypress

Laminate: Fawn Cypress

Description

Dual Monitor Arm - Surface Mount

Description

Solo+ EZO Upper Panel 5ft - Panel A

Furniture Selection

Description

Custom Electric Height Adjustable Mobile Station

Size: 42"W x 24"D x 27"-53"H (range)

Frame Finish: Platinum Metallic

Description

EZOBORD Color: SG04 SILVER GRAY

Solo EZO Upper Panel 5ft- Summit TOP

Description

Solo EZO Upper Panel 5ft- Summit TOP- Push-in- Pattern Herringbone

Description

Solo+ EZO Upper Panel 6ft - Cut to size - Panel E&F

Description

Section 12640: WK-01B

Furniture Specification

Printed: 1/31/2019

Spec Item No.: WK-01B

Part Number (or Equal) Qty

SSPPH 16

Part Number (or Equal) Qty

SSLPT139 32

Part Number (or Equal) Qty

SSU-BOX 16

Laminate Frame

ROOM QTY OWNER

215B 16 CRRC

Locations:

Description

Cable Holder U box Cable Holder

Description

Pen Holder

Description

Letter Paper Shelf

Section 12640: WK-01B