36C25819Q0434-001.docx

Attachment A – Surgical Services RFQ#36C25819Q0435 Salient Characteristics

BRAND NAME STEELCASE FURNITURE

Surgical Services Seating

· Task Chair (qty. 4) - TS1 OR TS2

· +/- 28”-43”h x 17”-29”d x 27”-29”w

· Mesh back, vinyl back, or perforated textured polymer back acceptable

· Vinyl foam seat or mesh seat

· Adjustable arms and arm pads

· Pneumatic height adjustment

· Adjustable lumbar support

· Adjustable seat depth

· Tilt and tension control with stop

· Hard Casters

· Finish – metal components black

· Vinyl – grade C or higher

· Mesh finish to be determined if used

· Minimum weight capacity of 300 lbs

Worksurfaces

· Rectangular worksurfaces 72” W x 24” D (Qty 5)

· Worksurfaces 1-3/16” thick

· Must have a cutout with cover or grommet hole with cover on the surface for wire management

· Edge band edge

· Wall mounted- no wall track

· Must be L bracketed to the wall

· Finish – wood grain laminate top (maple, no oak)

· Finish- metallic legs and/or hardware

· Rectangular worksurfaces 60” W x 24” D (Qty 2)

· Worksurfaces 1-3/16” thick

· Must have a cutout with cover or grommet hole with cover on the surface for wire management

· Edge band edge

· Wall mounted- no wall track

· Must be L bracketed to the wall

· Finish – wood grain laminate top (maple, no oak)

· Finish- metallic legs and/or hardware

Storage

· Attached, locking steel pedestals - Box, Box, File (BBF) with attachment hardware (Qty 4)

· 27.5”h X 23”d X 15”w

· BBF to have pencil tray

· Box drawer includes one divider in each drawer

· File drawer includes one compressor

· Full extension drawers

· Linear pulls

· Finish – wood grain laminate top (maple – no oak)

· Finish – metallic storage and/or hardware (If metallic finish is an up charge, price it as metallic)

· Attached, locking steel pedestals - File, File (FF) with attachment hardware (Qty 4)

· 27.5”h X 23”d X 15”w

· File drawer includes one compressor

· Full extension drawers

· Linear pulls

· Finish – wood grain laminate top (maple – no oak)

· Finish – metallic legs, storage and/or hardware (If metallic finish is an up charge, price it as metallic)

Overheads

· 36” overhead with translucent door preferred but solid acceptable, LED task light and locks (qty 5) – MSS1

· Minimum 15”-16” height

· Minimum 14” depth

· Locking

· To come with 2 shelf dividers

· Wall mounted

· Back Panel

· Finish – metal case (if metallic finish is an up charge – price it as a metallic

· 30” overhead with translucent door preferred but solid acceptable, LED task light and locks (qty 3) – MSS1

· Minimum 15”-16” height

· Minimum 14” depth

· Locking

· To come with 2 shelf dividers

· Wall mounted

· Back Panel

· Finish – metal case (if metallic finish is an up charge – price it as a metallic

Tackboards – DC7

· 36” tackboard (qty 5)

· Finish – fabric grade C or higher

· 22” height

· Wall mounted

· Tackboards – DC7

· 30” tackboard (qty 3)

· Finish – fabric grade C or higher

· 22” height

· Wall mounted

Ergonomic Pieces

· Keyboard tray (qty 4) – CS1

· Keyboard shall have a tray for keyboard and mouse platform

· Tray shall lift and lock into place

· Tray shall retract under work surface when not needed

· Tray shall be sit/stand capable

· Tray shall have wrist rest

· Finish – black

· CPU holder (qty 4) – CS3

· Glide track to fit under 24” worksurface

· Adjustable width: 2.5”-8.25”

· Adjustable height: 13”-21”

· 360” degree swivel

· Metal frame