EPVA Medical Center_As-Built_Plumbing Sheets.pdf

This document is a comprehensive set of architectural and engineering plans for a Replacement Ambulatory Care Facility at the VA Outpatient Clinic in El Paso, Texas. The plans include detailed plumbing symbols and abbreviations, equipment connection schedules, and system-specific schematics for domestic water supply, fuel systems, medical gas outlets, and various plumbing risers throughout a multi-level facility.

The plumbing design encompasses domestic water distribution systems including booster pump and hot water recirculating pump schedules; duplex sewage ejector and hot water generator schedules; medical gas systems with outlet schedules, zone valve configurations, and zone alarm specifications; laboratory and dental air compressor systems with duplex filter and regulator assemblies; and oral evacuation systems. Additional infrastructure includes detailed riser diagrams for oxygen, medical air, vacuum, and nitrous oxide systems; nitrogen control panels; emergency low-pressure oxygen inlet boxes; and medical gas zone valve boxes. The plans also detail domestic water heater installations, emergency overflow and roof drain systems, clinical service sink rough-ins, yard cleanout details, pipe sleeve penetrations through fire-rated walls and structural elements, and vent stack configurations. Plumbing schedules indicate connection sizes ranging from 1/2 inch to 2 inches for various fixtures, with remarks documenting system-specific requirements and performance standards. The facility spans multiple levels with system risers C1, C2, and C3 distributing utilities throughout the building, and individual room plumbing riser diagrams specifying hot and cold water, waste, and vent configurations for patient care and clinical support spaces.