3M-ULTRA-Night-Vision-S25-TDS.pdf

3M™ Scotchshield™ Safety & Security Window Film Technical Data Sheet

Revision C, October 2021

1 / 2

Ultra Night Vision S25

Product Features and Benefits Combination safety / solar control window film Micro-layered film designed for tear resistance Tinted film with heat rejection properties Helps protect from broken glass hazards Increase comfort and help reduce air conditioning costs Helps extend the life of furnishings by significantly reducing harmful UV rays

Applications Bomb Blast Mitigation Building Envelope Protection Helping to Deter Break & Entry Safety Glazing Seismic Preparedness Spontaneous Glass Breakage

Film Properties (typical)

Film Thickness 8 mils nominal Film Construction Micro-layered Laminated Tensile Strength 28,500 psi (MD) / 26,000 psi (TD)

Break Strength 230 lbs/in (MD) / 210 lbs/in (TD) Elongation at Break 145% (MD) / 140% (TD)

Yield Strength 16,000 psi (MD) Elongation at Yield 8%

Modulus 575 kpsi Abrasion Resistance

(ASTM D1044)

< 3% ∆ Haze

Peel Strength (ASTM D3330) 4.1 lb/in

Flammability (ASTM E84) Class A Graves Area Tear

Resistance (ASTM D1004) 1,200 lbs% (MD) /950 lbs% (TD)

Puncture-Propagation-Tear

(ASTM D2582)

11 lbf

Puncture Strength (ASTM D4830) 207 lbf

Solar Properties – film applied to ¼” glass

¼” Clear ¼” Tint Dual Clear Dual Tint

VLT 25% 14% 22% 13%

VLR-Int 10% 10% 10% 10% VLR-Ext 25% 12% 28% 13%

SHGC 0.38 0.36 0.47 0.37

TSER 62% 64% 53% 63%

UV Block >99.9% >99.9% >99.9% >99.9% Glare ↓ 72% 72% 72% 72% U-Value 1.04 1.02 0.48 0.48

Solar Heat ↓ 54% 43% 33% 28%

Performance Testing

Method Glass Substrate * Film Attachment **

Rating

Safety Glazing / Impact Rating

16 CFR 1201

1/8” and 1/4” annealed -- Category 2, 400 ft-lbs and Category 1, 150 ft-lbs

ANSI Z97.1 Class A (Unlimited), 400 ft-lbs and Class B (Unlimited), 150 ft-lbs Impact Resistance

ASTMs E1886/E1996

1/4” tempered IPA Missile Level “A”

Blast Mitigation Blast Load Rating

GSA TS01-2003 /

ASTM F1642

1/4” tempered IPA 6 psi, 42 psi*msec GSA Level 2 / ASTM “No Hazard” 1” double pane (annealed) IPA 6 psi, 42 psi*msec GSA Level 2 / ASTM “No Hazard” 1” double pane (tempered) IPA 9 psi, 80 psi*msec GSA Level 2 / ASTM “No Hazard”

* Based on dry lamination of film to single pane glass and wet lamination of film to double pane insulated glass units.

** IPA = 3M™ Impact Protection Attachment Sealant, all 4 sides unless noted.

IMPORTANT: This Technical Data Sheet provides an overview of product performance. Prior to product selection you should refer to the current 3M Technical Specifications for more detailed product information and specifications.

3M™ Scotchshield™ Safety & Security Window Film Technical Data Sheet

Revision C, October 2021

2 / 2

Ultra Night Vision S25

Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third-party intellectual property rights is granted or implied with this information.

Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment, reviewing all applicable regulations and standards, and reviewing the product label and use instructions. Failure to properly evaluate, select, and use a 3M product in accordance with instructions or to meet all applicable safety regulations may result in injury, sickness, death, and/or harm to property.

Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR

ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.

IMPORTANT NOTICE:

This product is not approved in the State of Florida for use as hurricane, windstorm, or impact protection from wind-borne debris from a hurricane or windstorm. In compliance with Florida Statute 553.842, this product may not be advertised, sold, offered, provided, distributed, or marketed in the State of Florida as hurricane, windstorm, or impact protection from wind-borne debris from a hurricane or windstorm.

The information provided in this report is believed to be reliable; however, due to the wide variety of intervening factors, 3M does not warrant that the results will necessarily be obtained. All details concerning product specifications and terms of sale are available from 3M

Commercial Solutions Division 3M Center, Building 220-12E-04 St. Paul, MN 55144 3M.com/windowfilm

© 3M 2021. All rights reserved.

3M is a trademark of 3M. Used under license in Canada.

All other trademarks are property of their respective owners. Revision C, October 2021. Please recycle.