Attachment 4 Calc. of Self Performed Work.xlsx

XLSX spreadsheet 14 KB Posted

Attached to
Z2DA--FY26 NRM - 626-25-101 - Upgrade Critical Environments I
Solicitation number
36C24927B0004-626-25-101_UpgradeCriticalEnvironmentsI
Issued by

About this file

This is a spreadsheet template for calculating self-performed work, designed to support bidding on the GSA Schedule 84 (Z2DA) contract vehicle. The file serves as an attachment to the solicitation for the "Upgrade Critical Environments I" project, a 100% set-aside for Service-Disabled Veteran-Owned Small Business (SDVOSB) concerns under NAICS code 236220 (Commercial and Institutional Building Construction). The spreadsheet is intended to help contractors document and quantify the percentage of work they will perform themselves versus subcontract, which is a standard requirement for GSA Schedule bids to demonstrate contractor capability and control over contract performance.

Bidders responding to this solicitation must be certified SDVOSB firms listed in the SBA's veterans certification database and maintain active SAM.gov registrations. The winning contractor must also enroll with VETS4212 upon award. This requirement is issued as an Invitation for Bid (IFB) under RFO Parts 12 and 14, with award to the lowest-priced responsive, responsible bidder without negotiation. The small business size standard is $45 million. The procuring agency is the Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 9.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Table 1

CALCULATION OF SELF-PERFORMED/SUBCONTRACTED WORK
Offerors for All Other Specialty Trade Contractors (NAICS code 236220) must provide
at least 25 percent of the cost of the contract performance incurred for personnel will be spent on the prime contractor's employees. Provide a breakdown of material and personnel costs, by specification division listed for the project. Home Office overhead,profit/fee and bond costs shall be added after a subtotal of personnel and material/ Equipment costs has been calculated. Clearly identify the personnel costs you will be performing. Below is a suggested format.
Specification DivisionSB Vendor (Y or N)Personnel CostMaterial/Equipment Costs
PrimeY$0.00$0.00Change SB Vendor to Y or N based on vendor size. Add costs to gray areas only.
SubY$0.00$0.00
SubY$0.00$0.00
SubY$0.00$0.00
SubY$0.00$0.00
SubY$0.00$0.00
SubN$0.00$0.00
SubN$0.00$0.00
SubN$0.00$0.00
SubN$0.00$0.00
SubN$0.00$0.00
(Add additional lines as necessary for each Division applicable to this project)$$
$ - 0$0.00
$$
Sub Total (Personnel Costs, Material/Equipment Costs)$0.00Add percentage to gray areas only.
Percentage0Profit$0.00
Percentage0Home Office Overhead$0.00
Percentage0Bond$0.00
Grand Total$0.00
Calculation of self-performed personnel costs:
1. Total personnel costs * both prime and all subcontractors:$0.00
2. Subtract all subcontractor personnel costs* companies that will perform work
on this contract:$0.00
3. Remainder is ‘Total amount of work to be self-performed under the
Contract’:$0.00
4. Self-performed work = Line 3/Line 1 x 100 =ERROR:#DIV/0!
*personnel costs include labors, mechanics, other tradesmen, and office personnel directly charged to
the project (includes project manager, job superintendent, administrative, estimators, etc.)
I certify the above representations are true and correct to the best of my knowledge.

(Signature and Typed Name of Authorized Representative) Date

(Title of Authorized Representative)

File details come from the government source that posted it. Updated .