ATTACHMENT E SAFETY DATA SHEETS.pdf

SAFETY DATA SHEET

NALCO® 3DTS68

1 / 8

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Product name : NALCO® 3DTS68

Other means of identification : Not applicable.

Recommended use : Cooling Water Treatment for High Hardness Waters

Restrictions on use : Refer to available product literature or ask your local Sales Representative for restrictions on use and dose limits.

Company : Nalco Company 1601 W. Diehl Road Naperville, Illinois 60563-1198

USA

TEL: (630)305-1000

Emergency telephone number

: (800) 424-9300 (24 Hours) CHEMTREC

Issuing date : 06/27/2014

SECTION 2. HAZARDS IDENTIFICATION

GHS Classification

Not a hazardous substance or mixture.

GHS Label element

Precautionary Statements : Prevention:

Wash hands thoroughly after handling.

Response:

Specific measures: consult MSDS Section 4.

Storage:

Store in accordance with local regulations.

Other hazards : None known.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Non-hazardous ingredients

SECTION 4. FIRST AID MEASURES

In case of eye contact : Rinse with plenty of water. Get medical attention if symptoms occur.

In case of skin contact : Wash off with soap and plenty of water. Get medical attention if symptoms occur.

If swallowed : Rinse mouth. Get medical attention if symptoms occur.

If inhaled : Get medical attention if symptoms occur.

Protection of first-aiders : In event of emergency assess the danger before taking action. Do not put yourself at risk of injury. If in doubt, contact emergency responders.Use personal protective equipment as required.

2 / 8

Notes to physician : No specific measures identified.

See toxicological information (Section 11)

SECTION 5. FIREFIGHTING MEASURES

Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable extinguishing media

: None known.

Specific hazards during firefighting

: Not flammable or combustible.

Hazardous combustion products

: Carbon oxides

Special protective equipment for firefighters

: Use personal protective equipment.

Specific extinguishing methods

: Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

: Refer to protective measures listed in sections 7 and 8.

Environmental precautions : No special environmental precautions required.

Methods and materials for containment and cleaning up

: Stop leak if safe to do so. Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Flush away traces with water. For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.

SECTION 7. HANDLING AND STORAGE

Advice on safe handling : For personal protection see section 8. Wash hands after handling.

Conditions for safe storage : Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers.

Suitable material : The following compatibility data is suggested based on similar product data and/or industry experience: Shipping and long term storage compatibility with construction materials can vary; we therefore recommend that compatibility is tested prior to use.

Unsuitable material : not determinednot determined

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

3 / 8

This product does not contain any substance that has an established exposure limit.

Engineering measures : Good general ventilation should be sufficient to control worker exposure to airborne contaminants.

Personal protective equipment

Eye protection : Safety glasses

Hand protection : Wear protective gloves.

Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Skin protection : Wear suitable protective clothing.

Respiratory protection : No personal respiratory protective equipment normally required.

Hygiene measures : Wash hands before breaks and immediately after handling the product.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance : Solid

Colour : Light yellow

Odour : None

Flash point : > 93.3 °C pH : no data available

Odour Threshold : no data available

Melting point/freezing point : no data available

Initial boiling point and boiling range

: no data available

Evaporation rate : no data available

Flammability (solid, gas) : no data available

Upper explosion limit : no data available

Lower explosion limit : no data available

Vapour pressure : no data available

Relative vapour density : no data available

Relative density : 1.38

Density : no data available

Water solubility : completely soluble

Solubility in other solvents : no data available

Partition coefficient: n-octanol/water

: no data available

Auto-ignition temperature : no data available

Thermal decomposition : Carbon oxides

Viscosity, dynamic : no data available

4 / 8

Viscosity, kinematic : no data available

VOC : no data available

SECTION 10. STABILITY AND REACTIVITY

Chemical stability : Stable under normal conditions.

Possibility of hazardous reactions

: No dangerous reaction known under conditions of normal use.

Conditions to avoid : None known.

Incompatible materials : Contact with strong oxidizers (e.g. chlorine, peroxides, chromates, nitric acid, perchlorate, concentrated oxygen, permanganate) may generate heat, fires, explosions and/or toxic vapors.

Contains Sulfite.

Hazardous decomposition

: Oxides of carbon Oxides of nitrogen Oxides of phosphorus

SECTION 11. TOXICOLOGICAL INFORMATION

Information on likely routes of exposure

: Eye contact, Skin contact

Potential Health Effects

Eyes : Health injuries are not known or expected under normal use.

Skin : Health injuries are not known or expected under normal use.

Ingestion : Health injuries are not known or expected under normal use.

Inhalation : Health injuries are not known or expected under normal use.

Chronic Exposure : Health injuries are not known or expected under normal use.

Experience with human exposure

Eye contact : No symptoms known or expected.

Skin contact : No symptoms known or expected.

Ingestion : No symptoms known or expected.

Inhalation : No symptoms known or expected.

Toxicity

Product

Acute oral toxicity : no data available

Acute inhalation toxicity : no data available

Acute dermal toxicity : no data available

5 / 8

Skin corrosion/irritation : no data available

Serious eye damage/eye irritation

: no data available

Respiratory or skin sensitization

: no data available

Carcinogenicity

IARC No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.

OSHA No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA.

NTP No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.

Reproductive effects : no data available

Germ cell mutagenicity : no data available

Teratogenicity : no data available

STOT - single exposure : no data available

STOT - repeated exposure : no data available

Aspiration toxicity : no data available

SECTION 12. ECOLOGICAL INFORMATION

Ecotoxicity

Environmental Effects : Harmful to aquatic life with long lasting effects.

Toxicity to fish : LC50 Oncorhynchus mykiss (rainbow trout): 4,891 mg/l Exposure time: 96 h Test substance: 5% Aqueous Solution of Product

Toxicity to daphnia and other aquatic invertebrates

: LC50 Ceriodaphnia dubia: 4,317 mg/l Exposure time: 48 h Test substance: 5% Aqueous Solution of Product

Toxicity to algae : no data available

Persistence and degradability no data available

Mobility

6 / 8

The environmental fate was estimated using a level III fugacity model embedded in the EPI (estimation program interface) Suite TM, provided by the US EPA. The model assumes a steady state condition between the total input and output. The level III model does not require equilibrium between the defined media. The information provided is intended to give the user a general estimate of the environmental fate of this product under the defined conditions of the models.

If released into the environment this material is expected to distribute to the air, water and soil/sediment in the approximate respective percentages;

Air : <5% Water : 30 - 50% Soil : 50 - 70%

The portion in water is expected to be soluble or dispersible.

Bioaccumulative potential

This preparation or material is not expected to bioaccumulate.

Other information

SECTION 13. DISPOSAL CONSIDERATIONS

If this product becomes a waste, it is not a hazardous waste as defined by the Resource Conservation and Recovery Act (RCRA) 40 CFR 261, since it does not have the characteristics of Subpart C, nor is it listed under Subpart D.

Disposal methods : The product should not be allowed to enter drains, water courses or the soil. Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with local regulations. Dispose of wastes in an approved waste disposal facility.

Disposal considerations : Dispose of as unused product. Empty containers should be taken to an approved waste handling site for recycling or disposal. Do not re-use empty containers.

SECTION 14. TRANSPORT INFORMATION

The shipper/consignor/sender is responsible to ensure that the packaging, labeling, and markings are in compliance with the selected mode of transport.

Land transport (DOT)

Proper shipping name : PRODUCT IS NOT REGULATED DURING

TRANSPORTATION

Air transport (IATA)

Sea Transport (IMDG/IMO)

7 / 8

SECTION 15. REGULATORY INFORMATION

EPCRA - Emergency Planning and Community Right-to-Know Act

CERCLA Reportable Quantity

This material does not contain any components with a CERCLA RQ.

SARA 304 Extremely Hazardous Substances Reportable Quantity

This material does not contain any components with a section 304 EHS RQ.

SARA 302

: SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.

SARA 313

: SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.

California Prop 65 This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

INTERNATIONAL CHEMICAL CONTROL LAWS :

TOXIC SUBSTANCES CONTROL ACT (TSCA)

The substances in this preparation are included on or exempted from the TSCA 8(b) Inventory (40

CFR 710)

CANADIAN ENVIRONMENTAL PROTECTION ACT (CEPA)

The substance(s) in this preparation are included in or exempted from the Domestic Substance List

(DSL).

SECTION 16. OTHER INFORMATION

NFPA: HMIS III:

Revision Date : 06/27/2014 Version Number : 1.0 Prepared By : Regulatory Affairs

REVISED INFORMATION: Significant changes to regulatory or health information for this revision is indicated by a bar in the left-hand margin of the SDS.

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a

Flammability

H e a lt h

In s ta b ility

FLAMMABILITY

PHYSICAL HAZARD

HEALTH

Special hazard.

0 = not significant, 1 =Slight, 2 = Moderate, 3 = High 4 = Extreme, * = Chronic

8 / 8 guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.

For additional copies of an MSDS visit www.nalco.com and request access.

NALCO® 7346 TAB

1 / 11

Section: 1. PRODUCT AND COMPANY IDENTIFICATION

Product name : NALCO® 7346 TAB

Other means of identification : Not applicable.

Recommended use : BIOCIDE

Restrictions on use : Refer to available product literature or ask your local Sales Representative for restrictions on use and dose limits.

Company : Nalco Company 1601 W. Diehl Road Naperville, Illinois 60563-1198

USA

TEL: (630) 305-1000

Emergency telephone number

: (800) 424-9300 (24 Hours) CHEMTREC

Issuing date : 12/09/2021

Section: 2. HAZARDS IDENTIFICATION

GHS Classification

Oxidizing solids : Category 1 Acute toxicity (Oral) : Category 4 Acute toxicity (Inhalation) : Category 4 Skin corrosion : Category 1B Serious eye damage : Category 1 Skin sensitization : Category 1

GHS Label element

Hazard pictograms :

Signal Word : Danger

Hazard Statements : May cause fire or explosion; strong oxidiser.

Harmful if swallowed or if inhaled.

Causes severe skin burns and eye damage.

May cause an allergic skin reaction.

Precautionary Statements : Prevention:

Keep away from heat. Keep/Store away from clothing and other combustible materials. Do not breathe dusts or mists. Wear protective gloves/ protective clothing/ eye protection/ face protection.

Response:

IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell. Rinse mouth. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove

2 / 11 person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Immediately call a POISON CENTER or doctor/ physician. IF ON CLOTHING:

rinse immediately contaminated clothing and skin with plenty of water before removing clothes.

Disposal:

Dispose of contents/ container to an approved waste disposal plant.

Other hazards : None known.

Section: 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name CAS-No. Concentration: (%)

1-Bromo-3-Chloro-5,5-Dimethyl-Hydantoin 16079-88-2 54.2 1,3-Dichloro-5,5-Dimethylhydantoin 118-52-5 28.9 1,3-Dichloro-5-Ethyl-5-Methylhydantoin 89415-87-2 15.9 Sodium Chloride 7647-14-5 1 - 5

Section: 4. FIRST AID MEASURES

In case of eye contact : Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Get medical attention immediately.

In case of skin contact : Wash off immediately with plenty of water for at least 15 minutes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention immediately.

If swallowed : Rinse mouth with water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.

If inhaled : Remove to fresh air. Treat symptomatically. Get medical attention.

Protection of first-aiders : In event of emergency assess the danger before taking action. Do not put yourself at risk of injury. If in doubt, contact emergency responders. Use personal protective equipment as required.

Notes to physician : Treat symptomatically.

Most important symptoms and effects, both acute and delayed

: See Section 11 for more detailed information on health effects and symptoms.

Section: 5. FIREFIGHTING MEASURES

Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable extinguishing media

: None known.

Specific hazards during : Oxidizer. Contact with other material may cause fire.

3 / 11 firefighting

Hazardous combustion products

: Decomposition products may include the following materials: Carbon oxides nitrogen oxides (NOx)

Special protective equipment for firefighters

: Use personal protective equipment.

Specific extinguishing methods

: Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. In the event of fire and/or explosion do not breathe fumes.

Section: 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

: Ensure adequate ventilation. Keep people away from and upwind of spill/leak.

Avoid inhalation, ingestion and contact with skin and eyes. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Ensure clean-up is conducted by trained personnel only.

Refer to protective measures listed in sections 7 and 8.

Environmental precautions : Do not allow contact with soil, surface or ground water.

Methods and materials for containment and cleaning up

: Sweep up and shovel into suitable containers for disposal.

Section: 7. HANDLING AND STORAGE

Advice on safe handling : Do not ingest. Do not breathe dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Wash hands thoroughly after handling. Use only with adequate ventilation.

Conditions for safe storage : Keep in a cool, well-ventilated place. Keep away from reducing agents. Keep away from combustible material. Keep out of reach of children. Keep container tightly closed. Store in suitable labelled containers.

Suitable material : The following compatibility data is suggested based on similar product data and/or industry experience: Shipping and long term storage compatibility with construction materials can vary; we therefore recommend that compatibility is tested prior to use.

Unsuitable material : not determined

Section: 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

Components CAS-No. Form of exposure Permissible concentration

Basis

1,3-Dichloro-5,5- Dimethylhydantoin

118-52-5 TWA 0.2 mg/m3 ACGIH

STEL 0.4 mg/m3 ACGIH

TWA 0.2 mg/m3 NIOSH REL

4 / 11

STEL 0.4 mg/m3 NIOSH REL

TWA 0.2 mg/m3 OSHA Z1

Engineering measures : Effective exhaust ventilation system. Maintain air concentrations below occupational exposure standards.

Personal protective equipment

Eye protection : Safety goggles

Face-shield

Hand protection : Wear impervious chemical-resistant gloves when handling this product.

The following glove types are recommended based on our review of glove manufacturer information and/or other available sources.

Nitrile rubber Other glove types may be used for short term, incidental contact if determined by testing to provide adequate worker protection.

Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Skin protection : Flame retardant protective clothing

Respiratory protection : Use local exhaust ventilation or other engineering controls as necessary to control airborne mist and vapor.

Where concentrations in air may exceed the limits given in this section or when significant mists, vapors, aerosols are generated, an approved air purifying respirator equipped with suitable filter cartridges is recommended.

Use a particulate pre-filter where operations generate significant mists or aerosols.

Recommended gas and vapour cartridge:

A particulate cartridge may be used.

with a Particulate pre-filter.

In event of emergency or planned entry into unknown concentrations, a positive pressure, full-facepiece SCBA or supplied-air respirator should be used.

Hygiene measures : Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling. Provide suitable facilities for quick drenching or flushing of the eyes and body in case of contact or splash hazard.

The Personal Protective Equipment (PPE) recommendations provided above have been made in good faith based on typical expected conditions of use. PPE selection should always be completed in conjunction with a proper risk assessment and in accordance with a PPE management program.

Section: 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance : Briquettes

Colour : off-white

Odour : Pungent

Flash point : 142 °C, Method: ASTM D 92, Cleveland open cup pH : 3.6,(1 %), Method: ASTM E 70

Odour Threshold : no data available

5 / 11

Melting point/freezing point : MELTING POINT: 120 - 148 °C, ASTM D-2117

Initial boiling point and boiling range

: no data available

Evaporation rate : < 1

Flammability (solid, gas) : no data available

Upper explosion limit : no data available

Lower explosion limit : no data available

Vapour pressure : no data available

Relative vapour density : no data available

Relative density : no data available

Density : no data available

Water solubility : 5.4 g/l (25 °C)

Solubility in other solvents : no data available

Partition coefficient: n-octanol/water

: no data available

Auto-ignition temperature : no data available

Thermal decomposition : no data available

Viscosity, dynamic : no data available

Viscosity, kinematic : no data available

Molecular weight : no data available

VOC : no data available

Section: 10. STABILITY AND REACTIVITY

Reactivity : No dangerous reaction known under conditions of normal use.

Chemical stability : Stable under normal conditions.

Possibility of hazardous reactions

: No dangerous reaction known under conditions of normal use.

Conditions to avoid : None known.

Incompatible materials : Strong acids

Strong Bases Contact with organic materials (e.g. rags, sawdust, hydrocarbon oils or solvents) and avoid reducing agents (e.g. hydrazine, sulfites, sulfide, aluminum or magnesium dust) which can generate heat, fires, explosions and the release of toxic fumes.

Organic materials and reducing agents Oxidizing agents Combustible materials

Hazardous decomposition

: In case of fire, hazardous decomposition products may be produced such as:

Carbon oxides

6 / 11 nitrogen oxides (NOx)

Section: 11. TOXICOLOGICAL INFORMATION

Information on likely routes of exposure

: Eye contact, Skin contact

Potential Health Effects

Eyes : Causes serious eye damage.

Skin : Causes severe skin burns. May cause allergic skin reaction.

Ingestion : Harmful if swallowed. Causes digestive tract burns.

Inhalation : Harmful if inhaled. May cause nose, throat, and lung irritation.

Chronic Exposure : Health injuries are not known or expected under normal use.

Experience with human exposure

Eye contact : Redness, Pain, Corrosion

Skin contact : Redness, Pain, Irritation, Corrosion, Allergic reactions

Ingestion : Corrosion, Abdominal pain

Inhalation : Respiratory irritation, Cough

Toxicity

Product

Acute oral toxicity : LD50 rat: 468 - 477 mg/kg Test substance: Product

Acute inhalation toxicity : Acute toxicity estimate: 1.59 mg/l Exposure time: 4 h Test atmosphere: dust/mist

Acute dermal toxicity : LD50 rabbit: > 2,000 mg/kg Test substance: Active Substance

Skin corrosion/irritation : no data available

Serious eye damage/eye irritation

: no data available

Respiratory or skin sensitization

: no data available

Carcinogenicity : no data available

Reproductive effects : no data available

Germ cell mutagenicity : no data available

Teratogenicity : no data available

STOT - single exposure : no data available

7 / 11

STOT - repeated exposure : no data available

Aspiration toxicity : no data available

Section: 12. ECOLOGICAL INFORMATION

Toxicity

Environmental Effects : Very toxic to aquatic life.

Toxicity to fish : LC50 Oncorhynchus mykiss (rainbow trout): 0.5 mg/l Exposure time: 96 hrs Test substance: Product

LC50 Lepomis macrochirus (Bluegill sunfish): 1.2 mg/l

LC50 Cyprinodon variegatus (sheepshead minnow): 1.4 mg/l

Test substance: value expressed as Br2

LC50 Pimephales promelas (fathead minnow): 0.71 mg/l

: LC50 Mysid Shrimp (Mysidopsis bahia): 0.93 mg/l

LC50 American Oyster: 0.84 mg/l

Test substance: value expressed as Br2

EC50 Daphnia magna (Water flea): 1.1 mg/l Exposure time: 48 hrs

LC50 Daphnia magna (Water flea): 1.1 mg/l

NOEC Daphnia magna (Water flea): 0.63 mg/l

Toxicity to algae : LC50 Green Algae (Pseudokirchneriella subcapitata, previously Selenastrum capricornutum): 0.12 mg/l Exposure time: 72 hrs Test substance: Active Substance

Toxicity to fish (Chronic toxicity)

: EC25 / IC25: 0.60 mg/l Exposure time: 7 d

8 / 11

Species: Fathead Minnow

LOEC: 1.0 mg/l

NOEC: 0.50 mg/l

(Chronic toxicity)

: EC25 / IC25: 0.45 mg/l Exposure time: 7 d Species: Ceriodaphnia dubia

LOEC: 0.50 mg/l

NOEC: 0.25 mg/l

Toxicity to terrestrial organisms

: LC50 Bobwhite Quail: > 5,620 mg/kg Test substance: Similar active ingredients

LC50 Mallard Duck: > 5,620 mg/kg Test substance: Similar active ingredients

Persistence and degradability

The product is hydrolyzed in water to hypobromous acid, hypochlorous acid and 5,5-dimethylhydantoin.

Chemical Oxygen Demand (COD): 140,000 mg/l

Biochemical Oxygen Demand (BOD):

Incubation Period Value Test Descriptor 150 mg/l

Mobility

The environmental fate was estimated using a level III fugacity model embedded in the EPI (estimation program interface) Suite TM, provided by the US EPA. The model assumes a steady state condition between the total input and output. The level III model does not require equilibrium between the defined media. The information provided is intended to give the user a general estimate of the environmental fate of this product under the defined conditions of the models.

If released into the environment this material is expected to distribute to the air, water and soil/sediment in the approximate respective percentages;

Air : <5%

9 / 11

Water : 50 - 70% Soil : 30 - 50%

The portion in water is expected to be soluble or dispersible.

Bioaccumulative potential

This preparation or material is not expected to bioaccumulate.

Other information

Section: 13. DISPOSAL CONSIDERATIONS

Disposal methods : Do not contaminate storm water drains, natural waterways or soil with chemical or used container. Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with local regulations.

Dispose of wastes in an approved waste disposal facility.

Disposal considerations : Dispose of as unused product. Empty containers should be taken to an approved waste handling site for recycling or disposal. Do not re-use empty containers.

Section: 14. TRANSPORT INFORMATION

The shipper/consignor/sender is responsible to ensure that the packaging, labeling, and markings are in compliance with the selected mode of transport.

Land transport (DOT)

Proper shipping name : OXIDIZING SOLID, CORROSIVE, N.O.S.

Technical name(s) : 1-BROMO-3-CHLORO-5,5,-DIMETHYLHYDANTOIN UN/ID No. : UN 3085 Transport hazard class(es) : 5.1, 8 Packing group : III

Air transport (IATA)

Proper shipping name : OXIDIZING SOLID, CORROSIVE, N.O.S.

Technical name(s) : 1-BROMO-3-CHLORO-5,5,-DIMETHYLHYDANTOIN UN/ID No. : UN 3085 Transport hazard class(es) : 5.1, 8 Packing group : III

Sea transport (IMDG/IMO)

Proper shipping name : OXIDIZING SOLID, CORROSIVE, N.O.S.

Technical name(s) : 1-BROMO-3-CHLORO-5,5,-DIMETHYLHYDANTOIN UN/ID No. : UN 3085 Transport hazard class(es) : 5.1, 8 Packing group : III

*Marine pollutant : BROMOCHLORO-5,5-DIMETHYLHYDANTOIN

10 / 11

* Note: This product is regulated as a Marine Pollutant when shipped by Rail or Highway (in bulk quantities), and when shipped by water in all quantities.

Section: 15. REGULATORY INFORMATION

TSCA list : No substances are subject to a Significant New Use Rule.

The following substance(s) is/are subject to TSCA 12(b) export notification requirements: 1-Bromo-3-Chloro-5,5-Dimethyl-Hydantoin

EPA Reg. No. : 6836-115-1706

EPCRA - Emergency Planning and Community Right-to-Know Act

CERCLA Reportable Quantity

This product does not contain a RQ substance, or this product contains a substance with a RQ, however the calculated RQ exceeds the reasonably attainable upper limit.

SARA 304 Extremely Hazardous Substances Reportable Quantity

This material does not contain any components with a section 304 EHS RQ.

SARA 311/312 Hazards : Oxidiser (liquid, solid or gas)

Acute toxicity (any route of exposure) Respiratory or skin sensitisation Skin corrosion or irritation Serious eye damage or eye irritation

SARA 302 : This material does not contain any components with a section 302

EHS TPQ.

SARA 313 : This material does not contain any chemical components with known

CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.

California Prop. 65 This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

INTERNATIONAL CHEMICAL CONTROL LAWS :

United States TSCA Inventory This product is exempted under TSCA and regulated under FIFRA. The inerts are on the Inventory List.

Australia. Australian Industrial Chemicals Introduction Scheme (AICIS) All substances in this product comply with the Australian Industrial Chemicals Introduction Scheme (AICIS)

Canadian Domestic Substances List (DSL) Substances regulated under the Pest Control Products Act are exempt from CEPA New Substance Notification requirements.

Japan. ENCS - Existing and New Chemical Substances Inventory All substances in this product comply with the Law Regulating the Manufacture and Importation Of Chemical Substances and are listed on the Existing and New Chemical Substances list (ENCS).

11 / 11

Korea. Korean Existing Chemicals Inventory (KECI) All substances in this product comply with the Chemical Control Act (CCA) and are listed on the Existing Chemicals List (ECL)

Philippines Inventory of Chemicals and Chemical Substances (PICCS) All substances in this product comply with the Republic Act 6969 (RA 6969) and are listed on the Philippines Inventory of Chemicals & Chemical Substances (PICCS).

China Inventory of Existing Chemical Substances All substances in this product comply with the Provisions on the Environmental Administration of New Chemical Substances and are listed on or exempt from the Inventory of Existing Chemical Substances China (IECSC).

New Zealand. Inventory of Chemicals (NZIoC), as published by ERMA New Zealand All substances in this product comply with the Hazardous Substances and New Organisms (HSNO) Act 1996,and are listed on or are exempt from the New Zealand Inventory of Chemicals.

Taiwan Chemical Substance Inventory All substances in this product comply with the Taiwan Existing Chemical Substances Inventory (ECSI).

Section: 16. OTHER INFORMATION

NFPA: HMIS III:

Revision Date : 12/09/2021 Version Number : 1.6 Prepared By : Regulatory Affairs

REVISED INFORMATION: Significant changes to regulatory or health information for this revision is indicated by a bar in the left-hand margin of the SDS.

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.

For additional copies of an SDS visit www.nalco.com and request access.

Flammability

H e a lt h

In s ta b ility

OX

FLAMMABILITY

PHYSICAL HAZARD

HEALTH

3*

Special hazard. 0 = not significant, 1 = Slight, 2 = Moderate, 3 = High 4 = Extreme, * = Chronic