33 42 13 pipe culvert.doc
DOC document 32 KB Posted
- Attached to
- DNR -MRA Infrastructure Components
- Solicitation number
- 21-422DNR-REALT-B-20072
- Issued by
- Champaign County, Illinois
About this file
This document outlines the specifications for a pipe culvert project under a state and local government contract. The contract requires the vendor to provide and deliver corrugated metal pipe culverts, connecting bands, connecting band pipe gaskets, and anti-seep collars. The pipe culverts must meet Illinois Department of Transportation's "Standard Specifications for Road and Bridge Construction." The connecting bands must be 24 inches wide with a minimum of five connecting bolts, and the connecting band gaskets must be flexible and watertight per the manufacturer's recommendations. The anti-seep collars must be a two-piece bolt-together design that seals any gaps around the pipe.
The document does not provide details on pricing terms, set asides, incumbents, funding requirements, or other salient information about the contract opportunity. It solely focuses on the technical specifications for the required products.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Standard CertificationsV.18.1~28.doc | DOC document | |
| Standard Terms and Conditions1~49.pdf | ||
| 35 20 00 water control gate revised.docx | DOCX document | |
| Scope of Work - Small~35.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SEQ CHAPTER \h \r 1
DIVISION 33 - UTILITIES
Section 33 42 13 – Pipe Culvert
1.
GENERAL.
1-01.
WORK INCLUDES.
A.
Base Bid:
Vendor shall provide and deliver the following materials:
a. Corrugated Metal Pipe Culvert(s)
b. Pipe Connecting Bands
c. Connecting Band Pipe Gaskets
d. Anti-seep Collars
1-03.
SUBMITTALS.
A. Prior to approval, the Vendor shall submit product data for the following components:
Culvert
2.
Connecting Band
3.
Connecting Band Pipe Gasket
4.
Anti-seep Collar 2.
PRODUCTS.
2-01.
PIPE CULVERT
Of a size and length as described or referenced in the scope document or drawings:
A.
Aluminized Steel Type 2 Corrugated Pipe.
1.
Aluminized type 2 corrugated steel pipe as per Article 1006.01 of the Illinois Department of Transportation’s “Standard Specifications for Road and Bridge Construction.”, adopted April 1, 2016.
2.
Corrugated Pipe Ends shall have annular or recor pipe ends for extra wide bands and/or gate attachment.
2-02.
PIPE CONNECTING BANDS
1. Pipe Connecting “Hugger” Bands shall be fabricated from the same material as the pipe and be twenty-four inches wide (24”) and have a minimum of five (5) connecting bolts to be provided.
2. Connecting band gasket shall be of a flexible material and shall be of sufficient width and diameter to provide for a watertight pipe connection when used with the above referenced connecting band, per manufacturer’s recommendation.
2-03.
ANTI-SEEP COLLARS
1. Anti-seep diaphragms shall be sized to fit around the corrugated metal culvert referenced in Section 2-01.
2. Diaphragm shall be a two-piece bolt together design.
3.
Any lap between the two sections or space around the pipe shall be sealed with a flexible material, such as caulk or asphalt, to deter water transmission along the pipe.
END 33 42 13.
FILE# 4-19-032
33 42 13-
December 2020
FILE# 4-19-032
33 42 13-
December 2020
File details come from the government source that posted it. Updated .