PWS_HazWaste-Shipment 20260626.pdf

PDF 418 KB Posted

Attached to
USCG Base Kodiak Hazardous Waste Disposal Federal contract opportunity
Solicitation number
31140PR260000123
Issued by
Department of Homeland Security US Coast Guard

About this file

This is a Performance Work Statement (PWS) for hazardous and non-hazardous waste disposal and recycling services required by U.S. Coast Guard Base Kodiak in Kodiak, Alaska. The Base operates as a Large Quantity Generator (ID AK9690330742) and requires the contractor to provide complete services for preparation, shipment, transportation, and off-site disposal or recycling of regulated and non-regulated wastes in compliance with federal, state, and local regulations.

The contractor must manage three phases of work: Pre-Removal, Removal, and Post-Removal. The contractor is responsible for all personnel, equipment, materials handling, personal protective equipment, permits, licenses, waste profiles, EPA e-Manifest system fees, and Notification of Regulated Waste Activity filings. The contractor must use only facilities and transporters listed on the Defense Logistics Agency Disposition Services (DLADS) Qualified Facilities List (QFL) and Qualified Transporters List (QTL). Shipment must be initiated within 30 days of notice to proceed, with five business days' advance notice required before site visits or removal efforts. Driver information, including Commercial Driver License number and expiration date, must be provided 24 hours before removal, unless the contractor has pre-approved a list of multiple drivers. Services are performed during normal Base Kodiak working hours (8:00 AM to 4:00 PM AST) Monday through Friday, excluding federal holidays. The government provides pre-packaged DOT-compliant containers, forklift and operator, pallet jack, parking for temporary storage, signatory services as the generator, and waste profile assistance. The contractor must provide Certificates of Disposal/Destruction or Recycling within 30 days of completion and cannot receive payment until these certificates are received. The container inventory includes 178 items totaling approximately 30,000+ pounds, consisting of hazardous materials such as brake fluid, paint slops, lead-contaminated materials, solvents, and glycol mixtures, as well as non-hazardous items including used oils, oily rags, paint booth filters, lubricants, and universal waste lamps and batteries. The contractor may anticipate up to 10 additional universal waste containers generated after RFP issuance.

View the file

Other files for this federal contract opportunity

Other files attached to USCG Base Kodiak Hazardous Waste Disposal, newest first.
File Type Posted
Questions_Responses 20260706.pdf PDF
WD 2015-5687.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Performance Work Statement

U.S. Coast Base Kodiak Environmental

Kodiak, Alaska

1. INTRODUCTION

U.S. Coast Guard (USCG) Base Kodiak requires services for the preparation, shipment, and off-site disposal or recycling of hazardous waste and/or other regulated/non-regulated wastes as noted in section

11.

Base Kodiak is located on the east side of Kodiak, Island, approximately 8 miles south of the City of

Kodiak. The Base Transportation Disposal and Storage Facility is located inside a secured fence line above Windrider Drive just off Seafarer Drive and operates as a Large Quantity Generator under

Generator ID AK9690330742.

2. CONTRACTOR SUPPORT

2.1 Contractor is to provide the following services for Federal and State regulatory compliant disposal of the Hazardous Waste noted in section 11. The Contractor agrees to provide all services necessary for the shipment preparation, transportation, final treatment, disposal, and/or recycling of the items listed in accordance with (IAW) all local, state, and federal laws and regulations, and the terms and conditions of this contract. These services shall include all necessary personnel, including applicable Subcontractors, labor, transportation, equipment, and the compilation and submission of all documentation required by this contract. The Contractor shall anticipate and incorporate into their bid, the potential addition of up to ten (10) Universal Waste Containers generated after RFP issuance but prior to shipment execution. The majority of any additional universal waste is anticipated to consist of waste lamps; however, the additions may include no more than one (1) container of batteries and one (1) container of mercury-containing equipment, not to exceed ten (10) total additional containers.

2.2 All items, regardless of the condition, are being discarded by the Government (USG) and will require recycling or disposal. The requirements for removal of wastes under this contract are divided into three main phases: Pre-Removal, Removal, and Post-Removal. The Contractor and their Subcontractors must always perform in a prudent, conscientious, safe, and professional manner. The Contractor shall ensure that its agents, employees, and Subcontractors involved in handling and packaging the hazardous waste are trained for the level of expertise required for the proper performance of the task; in particular, the areas of chemical incompatibility, general first aid procedures, and spills. The Contractor shall provide all Materials Handling Equipment (MHE) and Personal Protective Equipment (PPE), unless otherwise stated. The MHE and PPE must be appropriate to safely handle the hazardous waste, to include meeting any additional military installation specific requirements. The Contractor agrees that all personnel and equipment used in the performance of this contract are subject to safety inspections by

USG personnel while on federal property. Without additional expense to the USG, the Contractor shall be responsible for paying all fees, preparing, or obtaining any necessary licenses, permits, notifications, waste profiles, or reports, which result from a Contractor’s transportation, recycling, or disposal decision.

This includes any fees associated with requirements of the Environmental Protection Agency (EPA) national electronic manifest (e-Manifest) system. This includes acquiring any required permits or registrations necessary to operate on any installation listed in this contract and completing the

Notification of Regulated Waste Activity form for the Generator(s) of hazardous waste to sign and file with the applicable state regulators for waste disposal. This includes signing (on behalf of the USG) waste profiles requested by Transportation Storage and Disposal Facility (TSDF). All Contractor-signed waste profile sheets shall be written for the actual waste stream using the Generator’s profile for backup documentation. All Generator forms or other means of notifications, including correspondence with federal or state agencies on behalf of a Generator must be coordinated with and concurred with by the affected Generator prior to submission to any federal or state agency. A copy of all forms and relevant documentation, including correspondence shall be provided to the Contracting Officer Representative

(COR).

2.3 The Contractor and any Subcontractor(s) shall use only the facilities and transporters currently (at the time) listed in the Defense Logistics Agency Disposition Services (DLADS) Qualified Facilities List

(QFL) and Qualified Transporters List (QTL).

2.4 The Contractor may be required to attend special training, seminars, instructions, classes, safety orientations, etc., provided by the USG or to provide information to perform work or gain access to the installation. Example: pass and ID requirements, antiterrorist training, Environmental Management

System (EMS) policies, and/or forklift training.

2.5 All references to manifests in this contract refer to the appropriate shipping documents. The

Contractor shall use only a Non-Hazardous Waste Manifest or a Uniform Hazardous Waste Manifest for shipments of waste under this contract. Bill of Lading (BOL) documents are prohibited for use under this contract. Some states may require the use of state-specific waste codes and/or have unique requirements regarding the use of manifests. The Contractor will comply with all such state requirements in the performance of this contract.

2.6 All documentation shall be clearly marked with the name of the Generator, contract, and other applicable information required under local, state, and federal regulation. Emergency response information and 24-hour emergency phone numbers shall be listed on the manifest. If blocks for emergency information are not provided, this information shall be placed in the upper right-hand corner of each document.

2.7 Electronic Manifest System (e-Manifest system): Generators may continue to use paper manifests during their transition to fully electronic manifests in the e-Manifest system and the phase out of paper manifests. For this contract, the USG will provide Signatory on all shipping documents. The Contractor shall provide the USG a copy of the completed form(s) for review at least five (5) business days prior to removal. Upon Initial Transporter signature, the USG will require a paper copy for record keeping.

3. NOTIFICATIONS

3.1 Upon notice to proceed, Contractor will have 30 days to initiate shipment unless otherwise approved by the Contracting Officer (KO).

3.2 Except as may otherwise be specified herein, the Contractor shall notify the COR or other USG representative, at least five (5) business days before attempting site visits, providing services, or removal efforts. In addition to the notification above for removal efforts, the Contractor shall provide the name of the driver, the driver’s Commercial Driver License (CDL) number and its expiration date, to the COR or other USG representative at least 24 hours prior to removal. The Contractor may also opt to provide a list of approved, multiple drivers designated for pickups under this specific contract to the COR, or other

USG representative prior to any attempted removals. If this option is elected and the list is approved by the USG and maintained by the Contractor, the 24-hour notification requirement is mute for the remainder of the contract unless otherwise modified.

3.3 If a driver, other than the one specified 24 hours in advance for the specific Task Order (TO) or, one whose name does not appear on the optional list of approved or multiple drivers arrive for pickup, the COR or other designated USG representative will verify the personnel change with the Contractor before the pickup commences. The COR or any USG representative has the right to request any identification and/or occupational endorsements from the driver beyond what is identified in additional specific sections in this contract and can refuse commencement and/or completion of pickups if any unusual or suspicious actions occur. Any potential demurrage associated with the driver verification process and/or the unexpected halt or commencement of pickups will not be grounds for reimbursement by the USG.

3.4 The service to be performed under this contract shall be performed during normal Base Kodiak working days/hours, except for Federal holidays. Work that cannot be completed by close-of-business shall be discontinued and resumed the next business day, unless approved by the KO. Services will not be scheduled to be performed on a regular Federal holiday (see below), or one designated by Presidential proclamation. Normal hours of operations for this contract are between 8:00am and 4:00 pm AST.

2025/2026 Federal Holidays

New Year’s Day - 01 January*

Martin Luther King's Birthday – 20 January / 19 January

Presidents Day – 17 February / 16 February

Memorial Day – 26 May / 25 May

Juneteenth National Independence Day – 19 June

Independence Day - 04 July*

Labor Day – 01 September / 07 September

Columbus Day – 13 October / 12 October

Veterans Day - 11 November*

Thanksgiving Day – 27 November / 26 November

Christmas Day - 25 December*

*The holiday is observed on the preceding Friday or the following Monday when the holiday occurs on

Saturday or Sunday, respectively.

4. CONTRACTOR PERSONNEL

All Contractor personnel performing work under this Performance Work Statement (PWS) shall be qualified via training and experience, commensurate with the duties being fulfilled, to the minimum requirements under relevant 29 CFR-OSHA, 40 CFR-EPA, 49 CFR-DOT, EM 385 standards, Alaska

Administrative Code (18 AAC 62) and updates thereto. The Contractor shall be responsible for all initial and refresher training required of Contractor personnel and it shall be completed in the appropriate timeframes. Upon request by the USG, the Contractor shall provide proof that these trainings were completed.

5. SEGREGATION OF WASTE

All items collected on this contract must be segregated according to the current EPA Hazardous Waste

Compatibility Chart and kept physically separate from any containers not associated with this contract until the initial TSDF is reached. The items must be so marked, that they are readily linked to this contract throughout this performance period. The Contractor may not bring other waste onsite if conducting separate contract actions in conjunction with this TO.

6. LOADING

6.1 It is the Government's responsibility to ensure that the waste being removed is readily accessible for loading by the Contractor at the time of removal. Accessible is defined in this Section as unobstructed and not requiring the movement of other containers or objects that are not scheduled for removal on the subject TO to gain access to the waste that is scheduled for removal. The USG will aid the

Contractor/Subcontractor with loading during normal hours of operation if the appropriate personnel and/or equipment are available for use and the assistance is otherwise appropriate. An offer of assistance, if accepted by the USG, will be limited to initial placement or “tailgate” of the item(s) on conveyance furnished by the Contractor. The initial placement will be as determined by the USG, after consultation with the Contractor, if necessary. Only USG employees and other authorized USG equipment operators shall operate equipment used pursuant to this paragraph. By requesting loading assistance of conveyance furnished by the Contractor, the Contractor agrees to indemnify and hold harmless the USG for any damage, incidental or otherwise, to the conveyance by the USG.

6.2 At the Government's option, the use of USG scales will be allowed. When onsite USG scales are available; weights must be agreed upon by both the Contractor and the USG before removal. When offsite commercial scales must be used, a certified weight ticket will be provided to the COR as stated above and shall be the basis for payment to the Contractor.

7. TASK ORDER (TO) ADJUSTMENTS

7.1 All TO weights and/or volumes are estimated. The Contractor can expect that the TO weights and/or volumes will require adjustment upward or downward as removals take place and the actual weights/volumes being removed are determined. Therefore, the USG has the unilateral right to increase or decrease the TO weight/volume in those cases where the USG has underestimated or overestimated the weight/volume ordered for removal, allowing the Contractor to complete the performance.

7.2 In cases of adjustments resulting in a decreased weight/volume, these decreases are not subject to

FAR 52.212-4, termination for convenience coverage. In addition, it is agreed that it is acceptable for the

USG to issue TO modifications unilaterally for quantity changes, noun description changes, CLIN changes, adding/deleting lines, extending TO end dates, etc. The Contractor will be paid for the actual items and quantities removed per the awarded contract price schedule. If upon receipt of a unilateral TO modification and the Contractor does not agree with the USG’s change(s), the Contractor reserves the right to seek resolution through the KO. These modifications pertain only to issued TOs, and no changes will be made to the terms and conditions of the contract.

8. RETURN OF SHIPPING DOCUMENTATION

8.1 At the time of removal, the Contractor shall provide the Generator/USG Representative with a complete and accurate, transporter-signed copy of each manifest that is used for the waste removal. If the

Generator/USG Representative is not present at the time of removal, the Contractor shall provide the

COR with a copy of the manifest(s).

8.2 The use of transfer facilities is authorized during transit of waste to the designated facility. A transfer facility is any transportation related facility including loading docks, parking areas, storage areas and other similar areas where shipments of hazardous waste are held during the normal course of transportation, per 40 CFR § 260.10. The Contractor will ensure that the 10-day holding time is not exceeded at any transfer facility.

8.3 If within 30 days from the removal date, the waste has not yet been received at the designated

TSDF, the Contractor shall notify the COR of the current physical location of the waste. Within 45 days from the removal date, the Contractor shall provide the COR with a facility-signed electronic copy of each manifest via email. If multiple transporters were used during transit, the Contractor shall also provide the COR with a Uniform Hazardous or Non-Hazardous Waste Manifest Continuation Sheet, as applicable, with additional transporter signatures as necessary.

8.4 If the Contractor is unable to deliver the waste to the designated or alternate facility identified on the manifest(s) per 40 CFR § 263.21(a), the COR and Generator will be contacted for disposition and manifest revision instructions per 40 CFR § 263.21(b). The Contractor shall make reasonable attempts to deliver the waste to a qualified alternate facility rather than returning the waste to the Generator. In the event of rejected shipments, or where the shipment is undeliverable, the Contractor shall provide the

Generator with a written narrative of the incident, including details of all attempts to provide delivery to a qualified TSDF. If the manifest copy cannot be provided within 45 days from the date of removal, the

Contractor shall notify the generator and COR electronically with the current location of the manifested materials and the expected date of return for the manifests.

9. CERTIFICATES OF DISPOSAL, DESTRUCTION, & RECYCLING

Certificates of Disposal/Destruction (CD) or Recycling for any/all items are required. Some facilities issue CDs or Certificates of Recycling that, in essence, state the waste “will be” versus “has been” recycled, disposed, or destroyed IAW applicable regulations. Such certificates will be authorized under this Section, but only when issued and certified by the final recycling or disposal facility.

CDs and Certificates of Recycling shall be provided to the Generator and the COR within 30 days after disposal, destruction, or recycling occurs. The Contractor will not be authorized payment until all required Certificates of Disposal/Destruction (CD) or Recycling are received by the COR and Generator.

10. GOVERNMENT PROVIDED SERVICES OR EQUIPMENT

• All material pre-packaged in DOT compliant containers

• Forklift and operator

• Pallet jack as needed

• Parking for temporary placement of a shipping container up to 40 feet long

• Signatory as the generator for any shipping documents

• Assistance with waste profiles if requested

11. CONTAINERS AND WEIGHTS

11.1 Waste is noted as either Hazardous or Non-Hazardous wase. Safety Data Sheets or analytical data will be provided upon award to allow for accurate profiles and shipping documentation.

11.2 Container Inventory

Cont.ID Waste_Name Type BLDG_Location Container Size Unit LBS

24311 Brake Fluid, Used Haz N48 :: Sump 2 DM b/t 15 Gal 98

24552 Amalgam Haz N48 :: Sump 2 DF o/t 5 Gal 5

25018 Paint Slops, Oil Based Haz N48 :: Sump 7 DM o/t 30 Gal 267

25288 Rags, Gasoline Haz N48 :: Sump 2 DF o/t 5 Gal 12

25315 DUMOND Peel Away, Lead Paint Contaminated

Haz N48 :: Sump 1 DF o/t 55 Gal 112

25316 DUMOND Peel Away, Lead Contaminated

Haz N48 :: Sump 1 DF o/t 55 Gal 45

25317 DUMOND Peel Away, Lead Contaminated

Haz N48 :: Sump 1 DF o/t 55 Gal 194

25318 DUMOND Peel Away, Lead Contaminated PPE- Debris

Haz N48 :: Sump 1 CF 11G 1 Cyd 93

25324 Shop Vac Contents, Lead Contaminated

Haz N48 :: Sump 1 DF o/t 10 Gal 8

25326 DUMOND Peel Away, Lead Contaminated

Haz N48 :: Sump 1 DF o/t 55 Gal 133

25327 DUMOND Peel Away, Lead Contaminated

Haz N48 :: Sump 1 DF o/t 55 Gal 104

25328 DUMOND Peel Away, Lead Contaminated

Haz N48 :: Sump 1 DF o/t 55 Gal 144

25343 Solvent Rags Haz N48 :: Sump 2 DF o/t 55 Gal 50

25346 DUMOND Peel Away, Lead Contaminated

Haz N48 :: Sump 1 DF o/t 55 Gal 109

25347 DUMOND Peel Away, Lead Contaminated

Haz N48 :: Sump 1 DF o/t 55 Gal 43

25359 Paint Related Material and Debris

Haz N48 :: Sump 2 DF o/t 55 Gal 37

25379 Used Oil, Solvent Contaminated

Haz N48 :: Sump 2 DM b/t 55 Gal 39

25479 Glycol/Water Mixture5 - 50/50

Haz Locker 6 DF b/t 55 Gal 482

25481 Coolant Contaminated Absorbents and Debris

Haz Locker 6 DF o/t 55 Gal 203

25482 Denatured Alcohol, Klean Strip

Haz N48 :: Sump 7 DM b/t 5 Gal 26

25483 Glycol/Water Mix - 65/35 Haz Locker 6 DF b/t 55 Gal 483

25484 Glycol/Water Mixture - 65/35

Haz Locker 6 DF b/t 55 Gal 497

25485 Glycol/Water Mixture - 65/35

Haz Locker 6 DF b/t 55 Gal 95

25539 Breakthrough Parts Cleaner, Used

Haz N48 :: Sump 7 DM b/t 30 Gal 137

25555 Adhesive 2141, 3M Neoprene Rubber & Gasket

Haz N48 :: Sump 6 DM o/t 10 Gal 15

25577 POL/Gas Contaminated Absorbents & Debris, POV

Haz N48 :: Sump 7 DM o/t 55 Gal 221

25614 Antifreeze, Inhibited Propylene Glycol w/ Water ~ 50/50 Mix

Haz N48 :: Sump 4 DF b/t 55 Gal 295

25626 Cor-Ban 27L Filler Haz N48 :: Sump 7 DM o/t 5 Gal 15

25645 B&B Cleaning Solvent *99% Empty, 1% Product*

Haz N48 :: Sump 3 IBC 330 Gal 148

25647 Penair C5575 Aircraft Cleaner

Haz N48 :: Sump 5 DM b/t 55 Gal 109

25648 Penair M5704A Cleaner Haz N48 :: Sump 5 DM b/t 55 Gal 102

25684 N1 Paint Booth Filters Haz Locker 4 DF o/t 55 Gal 25

25685 N1 Paint Booth Filters Haz Locker 4 DF o/t 55 Gal 25

25706 Cleaner Tab, Active Green, Rational AG

Haz N48 :: Sump 3 DF o/t 55 Gal 131

25724 Oily/Water Mixture Haz Locker 5 DM b/t 30 Gal 210

25738 Soil Samples, Future CDC Site

Haz Locker 5 DM o/t 55 Gal 262

25749 Resin Enamel, Semigloss Haz N48 :: Sump 7 DM o/t 55 Gal 264

25790 3H Permatex Gasket Sealant

Haz N48 :: Sump 6 DM o/t 5 Gal 13

25796 Texstars Tex-Whiz Polish Haz N48 :: Sump 6 DM o/t 5 Gal 12

25801 3M Edge Sealer 4150S Haz N48 :: Sump 6 DM o/t 5 Gal 11

25804 Bonderite Durcisseur Haz N48 :: Sump 6 DM o/t 5 Gal 12

25805 Henzen 08628KUZ-

ULVOC

Haz N48 :: Sump 6 DM o/t 5 Gal 13

25807 JetGlo Express Activated Reducer

Haz N48 :: Sump 6 DM o/t 5 Gal 12

25808 JetGlo Express Hardener 85285 T1

Haz N48 :: Sump 6 DM o/t 5 Gal 12

25809 Klean Strip Acetone Haz N48 :: Sump 6 DM o/t 10 Gal 14

25811 Methyl Ethyl Ketone Haz N48 :: Sump 6 DM o/t 10 Gal 16

25813 Sherwin-Williams 23377K Epoxy Primer

Haz N48 :: Sump 6 DM o/t 5 Gal 13

25818 Breakthru-Pen Air 5575 Mixture

Haz Locker 3 DF o/t 10 Gal 46

25826 Purell-Advanced Hand Sanitizer Gel

Haz N48 :: Sump 6 DM o/t 10 Gal 32

25838 Jacket Water (Coolant) Haz Locker 3 DF o/t 5 Gal 26

25372 Pharmaceuticals Haz N46 DF o/t 5 Gal 5 25373 Pharmaceuticals, Aerosol Haz N46 DF o/t 1 Gal 2

22479 Refrigeration Oil, Used Non- Haz

N102 :: Bay A DM b/t 10 Gal 95

24277 Oily Rags & Debris Non- Haz

N102 :: Bay D CF 11G 1 Cyd 415

24625

Compressed Gas Cylinders-Tanks / 3-30lb Refrigerant Reovery Tanks (Type Unknown) 1- 5p Fire Extinguisher, Type B-C

Non- Haz

Locker 10 Tote 1 Cyd 100

24690 Antifreeze, Used Non- Haz

N48 :: Sump 5 DM b/t 55 Gal 351

24884 Antifreeze, Used Non- Haz

N48 :: Sump 5 DM b/t 55 Gal 465

25128 Sampling Waste Non- Haz

N48 :: Sump 5 DM o/t 55 Gal 55

25145 Paint Slops, Latex Non- Haz

N48 :: Sump 5 DM o/t 30 Gal 310

25261 Oily Rags and Debris Non- Haz

N102 :: Bay D CF 11G 1 Cyd 347

25265 Breakthrough, Used Non- Haz

N102 :: Bay A DF b/t 5 Gal 8

25277 OWS Sludge, Bldg 518 Non- Haz

N48 :: Sump 4 DM o/t 30 Gal 171

25415 OWS Sludge, Hangar 1 Non- Haz

N48 :: Sump 4 DM o/t 30 Gal 270

25417 OWS Sludge, N21-Sump

Non- Haz

N48 :: Sump 4 DM o/t 30 Gal 109

25418 OWS Sludge, Hangar 1- Sump 1

Non- Haz

N48 :: Sump 4 DM o/t 30 Gal 260

25419 OWS Sludge, Hangar 1- Sump 2

Non- Haz

N48 :: Sump 5 DM o/t 55 Gal 292

25423 Batteries, Carbon Zinc Non- Haz

N102 :: Bay A DF o/t 55 Gal 433

25490 Oily Rags Non- Haz

N102 :: Bay D CF 11G 1 Cyd 310

25492 Envirotex Lite Resin- Molding/Casting

Non- Haz

N102 :: Bay A DF o/t 3 Gal 7

25493 FSR Water Based Fiberglass Stain Remover

Non- Haz

N102 :: Bay A DF o/t 3 Gal 5

25502 Filters, Used Oil- JP5,Plastic

Non- Haz

N102 :: Bay D CF 11G 1 Cyd 307

25548 Paint Slops, Latex Non- Haz

N48 :: Sump 4 DM o/t 30 Gal 312

25552 PPG-PR-3500, Paint Stripper

Non- Haz

N102 :: Bay A DF o/t 10 Gal 11

25556 Oily Rags Non- Haz

N102 :: Bay D CF 11G 1 Gal 406

25559 Oily Rags Non- Haz

N102 :: Bay D CF 11G 1 Cyd 279

25563 Filters, Paint Booth Non- Haz

N48 :: Sump 4 DF o/t 55 Gal 36

25567 Paint Booth Filters Non- Haz

N48 :: Sump 4 DF o/t 55 Gal 35

25583 Self Leveling Green HT 3326--5-50, Hardener, 2- Part Kit

Non- Haz

N102 :: Bay A DF o/t 3 Gal 7

25605 DAPCO 2100 Primerless Firewall Sealant Resin

Non- Haz

N102 :: Bay A DF o/t 10 Gal 16

25609

AV-DEC TG 8498

Thixnflex Hardener

Non- Haz

N102 :: Bay A DF o/t 3 Gal 6

25612 U/W Lamps, 2-4ft Non- Haz

N102 :: Bay D DF o/t 30 Gal 105

25613 U/W Lamps, 2-4ft *Cardboard Tube*

Non- Haz

N102 :: Bay D DF o/t 30 Gal 114

25616 AFFF, Ansulite 3% Non- Haz

Locker 6 DF o/t 30 Gal 50

25621 POL Contaminated Rags and Debris

Non- Haz

N102 :: Bay D CF 11G 1 Cyd 305

25624 Anderol Royco 81ms Lubricant

Non-

N102 :: Bay A DF o/t 1

25625 Dupont Molykote Z Power Lubricant

Non- Haz

N102 :: Bay A DF o/t 1 Gal 7

25627 Nordstrom 950 Sealant/Lubricant

Non- Haz

N102 :: Bay A DF o/t 2.5 Gal 8

25628 Armite W-P-236A Prolube Anti-Seize

Non- Haz

N102 :: Bay A DF o/t 2.5 Gal 5

25630 Oily Rags Non- Haz

N102 :: Bay D CF 11G 1 Cyd 319

25641 Breakthrough CleanTech Cleaner-Degreaser

Non- Haz

Locker 3 DF b/t 5 Gal 10

25646 B&B Cleaning Solvent Mixture *80% Solvent 20% Water*

Non-

Locker 3 DM b/t 55 Gal 347

25649 Aircraft Soap/Gas Path Solvent Mixture

Non- Haz

Locker 3 DM b/t 55 Gal 265

25668 Oily Rags Non- Haz

N102 :: Bay D CF 11G 1 Cyd 415

25669 Oily Rags Non- Haz

N102 :: Bay D CF 11G 1 Cyd 429

25670 Oily Rags and Debris Non- Haz

N102 :: Bay D CF 11G 1 Cyd 333

25673 U/W Lamps *Cardboard Tubes*

Non- Haz

N102 :: Bay D DF o/t 30 Gal 14

25674 Batteries, Alkaline Non- Haz

N102 :: Bay A DF o/t 30 Gal 74

25676 U/W Battery, Lithium-Ion Non- Haz

N102 :: Bay A DF o/t 5 Gal 22

25678 Filters, Used Oil-Plastic Non- Haz

N102 :: Bay D CF 11G 1 Cyd 151

25679 Brominating Cartridge Non- Haz

N102 :: Bay A DF o/t 10 Gal 10

25681 Paint Slops, Latex Non- Haz

N48 :: Sump 5 DM o/t 55 Gal 478

25682 Glycol Contaminated Spill Material

Non- Haz

N102 :: Bay A DF o/t 5 Gal 29

25693 Sand Blast Media, Used Non- Haz

Locker 4 DF o/t 15 Gal 183

25696 Paint Booth Filters Non- Haz

Locker 4 DF o/t 55 Gal 33

25697 Unknown Liquid, Pending Labs

Non- Haz

Locker 3 DF o/t 55 Gal 100

25698 Unknown Liquid, Pending Labs

Non- Haz

Locker 3 DF b/t 5 Gal 3

25699 Gear Oil, STP 80W-90 Non- Haz

N102 :: Bay A DF o/t 10 Gal 9

25700 VLW Resin, Flooring Epoxy - Part A

Non- Haz

N102 :: Bay A DM o/t 10 Gal 61

25701 VLW Flooring Curative, Part B

Non- Haz

N102 :: Bay A DM o/t 5 Gal 23

25702 Magnabond #3, Deck Covering Polymer

Non- Haz

N102 :: Bay A DF o/t 10 Gal 53

25703 VirexII 256, Disinfectant Cleaner

Non- Haz

N102 :: Bay A DF o/t 5 Gal 9

25713 U/W Lamps, 2-4ft *Cardboard Tube*

Non- Haz

N102 :: Bay D DF o/t 30 Gal 103

25718 CAT ELC Coolant Non- Haz

N48 :: Sump 4 DF b/t 55 Gal 544

25719 ELC CAT Coolant Non- Haz

N48 :: Sump 4 DF b/t 55 Gal 546

25720 ELC CAT Coolant Non- Haz

N48 :: Sump 4 DF b/t 55 Gal 530

25721 CAT ELC Coolant Non- Haz

N48 :: Sump 4 DF b/t 55 Gal 503

25726 Oily Rags Non- Haz

N102 :: Bay D CF 11G 1 Cyd 244

25729 Used Oil, Solvent Contaminated

Non-

Locker 1 IBC 330 Gal 2260

25730 Used Oil, Solvent Contaminated

Non- Haz

Locker 2 IBC 330 Gal 1766

25732 Ozzy Juice, Used Non- Haz

Locker 3 DF b/t 30 Gal 147

25735 CAT-ELC Coolant Non- Haz

N48 :: Sump 4 DF b/t 55 Gal 65

25737 OWS Sludge, Sump 1 Non- Haz

N48 :: Sump 5 DM o/t 55 Gal 258

25741 POL Contaminated Absorbents and Debris

Non- Haz

N102 :: Bay D Bag 55 Gal 323

25743 Oily Rags Non- Haz

N102 :: Bay D CF 11G 1 Cyd 400

25750 T/M Quick-Step Resin, Part A

Non- Haz

N48 :: Sump 5 DM o/t 30 Gal 126

25752 Dex-O-Tex, Flooring Resin, Part A

Non- Haz

N48 :: Sump 5 DM o/t 55 Gal 171

25753 Dex-O-Tex, Flooring Resin Grout, Part E

Non- Haz

N102 :: Bay F DM o/t 10 Gal 35

25754 Dex-O-Tex, Flooring Resin, Sealer, Part A

Non-

N102 :: Bay F DM o/t 10

25764 Bonding Adhesive, L&M Everbond

Non- Haz

N102 :: Bay A DF o/t 10 Gal 34

25765 Dex-O-Tex Colrant Pigment Dispersion

Non- Haz

N102 :: Bay A DF o/t 3 Gal 17

25766 Dex-O-Tex Colarant Pigment Dispersion

Non- Haz

N102 :: Bay A DF o/t 2.5 Gal 17

25767 Dex-O-Tex Synthetic Aggregate-Slip Resistance

Non- Haz

N102 :: Bay F DM o/t 5 Gal 18

25768 Dex-O-Tex Expxy Flooring Resin

Non- Haz

N102 :: Bay C DM o/t 55 Gal 189

25769 NS-60 Aggregate, Deck Covering Polymer

Non- Haz

N102 :: Bay F DM o/t 5 Gal 46

25772 POL Contaminated Absorbents and Debris

Non- Haz

N102 :: Bay D CF 11G 1 Cyd 231

25773 Aeroshell Grease 6 Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25774 Armite Lube VV-P-36A Non- Haz

N102 :: Bay A DF o/t 3 Gal 9

25775 Bonderite M-CR 1132 Aero

Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25776 Vantage B&B 1995 Non- Haz

N102 :: Bay A DF o/t 10 Gal 12

25777

DOWSIL 3145 RTV

Adhesive

Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25778 Dupont Molykote Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25779 Fluid Film Liquid A Non- Haz

N102 :: Bay A DF o/t 15 Gal 39

25780 Lubriplate Aero Lubricating Grease

Non- Haz

N102 :: Bay A DF o/t 3 Gal 5

25782 Loctite C5-A Copper Based Anti-Seize

Non- Haz

N102 :: Bay A DF o/t 1 Gal 3

25783 Micro Glass Polish Non-

N102 :: Bay A DF o/t 1 Gal 2

25786 Momentive RTV 133 Silicone Sealant

Non- Haz

N102 :: Bay A DF o/t 2.5 Gal 3

25792 Royco22 Aircraft Grease Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25794 Sherlock Leak Detect Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25795 Parker O-Lube / Barium Grease

Non- Haz

N102 :: Bay A DF o/t 2.5 Gal 6

25803 Awlgrip Griptex-Coarse Non- Haz

N102 :: Bay A DF o/t 10 Gal 16

25806 Huntsman EPOCAST 169

A-1 US

Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25810 Loctite EA 9396 Aero Part A

Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25812 Rustoleum Consav 5600

MNT

Non- Haz

N102 :: Bay C DF o/t 15 Gal 48

25814 West Systems 206 Slow Hardener

Non- Haz

N102 :: Bay A DF o/t 2.5 Gal 6

25820 Loctite EA 9396 Aero Part B

Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25822 Rust-Oleum WDCARE Satin

Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25824 Oxivir Tb Disinfectant/Sanitizer

Non- Haz

N102 :: Bay A DF o/t 10 Gal 41

25827 EasyCare Platinum Paint and Primer ECPE-P

Non- Haz

N102 :: Bay A DF o/t 2.5 Gal 14

25830 Easy Care Ultra Premium Satin EZSE-P

Non- Haz

N102 :: Bay A DF o/t 2.5 Gal 8

25832 Filters, JP5 Non- Haz

N102 :: Bay D CF 11G 1 Cyd 149

25840 AWL Griptex 73012 Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25841 Hardener, Huntsman 9646 Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25842 Lubricant, Polysi PST-841 Non- Haz

N102 :: Bay A DF o/t 1 Gal 2

25846 OWS Liquid/Sediment Non- Haz

N102 :: Bay C DM b/t 55 Gal 355

25847 OWS Liquid/Sediment Non- Haz

N102 :: Bay C DM b/t 55 Gal 420

25848 OWS Liquid/Sediment Non- Haz

N102 :: Bay C DM b/t 55 Gal 375

25849 OWS Liquid/Sediment Non-

N102 :: Bay C DM b/t 55 Gal 400

File details come from the government source that posted it. Updated .