3-TerraPower - Mechanical Drawing with Exhaust Fans.pdf

PDF 10 MB Posted Aug 8, 2025

Attached to: RFP-2025-8352 - Ventilation Consultant
Solicitation number: RFP-2025-8352
Issued by: Washington

About this file

Written by GovTribe AI · Aug 26, 2025

These documents are Record Drawings for an HVAC and Lab Gas Piping project at the TerraPower facility located at 3315 Seaway Blvd in Everett, Washington. The project, completed by MacDonald-Miller Facility Solutions, involves installing new rooftop exhaust fans, single duct terminal units, argon gas piping, and miscellaneous ductwork. The record drawings are dated April 11, 2023, and cover multiple systems including HVAC equipment, ventilation, exhaust fans, air handling units, and lab gas piping infrastructure across the first and second floors of the facility.

The project scope includes installing (1) new rooftop exhaust fan, (2) new single duct terminal units, new argon gas piping, and associated ductwork. The drawings detail specific technical requirements following the 2018 Washington State Mechanical Code, International Mechanical Code, and local building standards. The argon gas system is designed for a 225 psig operating pressure with copper piping and specific valve configurations. The HVAC systems are designed to provide continuous ventilation, with various exhaust fans and air handling units operating on different schedules, including 24/7 continuous operation for certain laboratory spaces and equipment.

View the file

Other files

File	Type	Posted
1-Exhibit A - Statement of Work.docx	DOCX document	Aug 8, 2025
2-TerraPower - TI Permit Set.pdf	PDF	Aug 8, 2025
4-TP-LGL-TEMP-0007 TerraPower PO (Long Form) Terms and Conditions Non-USG, Rev 8 (May 31 2022) clean.docx	DOCX document	Aug 8, 2025
5-Final RFP-2025-8352 Ventilation Consultant Proposal Instructions.doc	DOC document	Aug 8, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

RECORD DRAWINGS

VICINITY MAP

NO SCALEN

SITE

3315 SEAWAY BLVD

EVERETT, WA 98203

I-5

HWY 2

POSESSION

SOUND

US NAVAL

STATION

EVERETT

HVAC GENERAL NOTES - 2018 WA STATE

1. THESE PLANS ARE SCHEMATIC AND DO NOT SHOW EXACT ROUTING OR EVERY OFFSET WHICH MAY BE REQUIRED. THE HVAC CONTRACTOR IS TO COORDINATE WITH ALL OTHER TRADES AND IS TO

VERIFY ALL CLEARANCES BEFORE COMMENCING WORK.

2. MATERIALS, METHODS, AND INSTALLATION SHALL COMPLY WITH THE PROVISIONS OF THE 2018 EDITIONS OF THE INTERNATIONAL MECHANICAL CODE, INTERNATIONAL BUILDING CODE, INTERNATIONAL

FIRE CODE 2018 WSEC, AND LOCAL CODES AND ORDINANCES.

3. DUCT CONSTRUCTION AND HANGING SHALL COMPLY WITH CHAPTER 6 OF THE 2018 IMC AND WITH CURRENT SMACNA STANDARDS. EARTHQUAKE BRACE ALL DUCTS 28" DIA AND LARGER WHICH

ARE SUSPENDED MORE THAN 12" BELOW STRUCTURAL SYSTEM.

4. JOINTS OF MEDIUM AND HIGH VELOCITY DUCT SYSTEMS SHALL BE SEALED WITH GASKETS OR LISTED MASTIC TYPE DUCT SEALANT.

5. DUCTS SHALL BE INSULATED AS INDICATED ON PLANS, PER 2018 WASHINGTON STATE ENERGY CODE, COMMERCIAL PROVISIONS

- DUCT WRAP, WHERE INDICATED, SHALL BE 0.75 LB/CU FT FIBERGLASS DUCT INSULATION WITH A FACTORY APPLIED REINFORCED ALUM. FOIL VAPOR BARRIER.

- SOUND LINING, WHERE INDICATED, SHALL BE 1" 1.5 LB/CU FT FIBERGLASS DUCT LINING COATED TO PREVENT FIBER EROSION AT VELOCITIES UP TO 6000 FPM.

6. FLEX DUCTS SHALL CONSIST OF A REINFORCED VAPOR BARRIER, 1 1/2" FIBERGLASS INSULATION, AND NON-PERFORATED INTERIOR LINER WITH WIRE HELIX. DUCT SHALL BE A UL 181 LISTED CLASS 1 AIR DUCT. FLEX DUCTS SHALL ONLY BE USED WHERE SHOWN AND SHALL NOT EXCEED 12' IN LENGTH UNLESS NOTED OTHERWISE.

7. PROVIDE EARTHQUAKE RESTRAINT FOR HVAC EQUIPMENT IN ACCORDANCE WITH SECTION 1613 OF THE 2018 IBC.

8. PROVIDE FIRE DAMPERS, SMOKE DAMPERS AND FIRE/SMOKE DAMPERS WHERE INDICATED ON PLANS AND AS REQUIRED BY SECTION 717.5 OF THE 2018 IBC. PROVIDE CEILING FIRE DAMPERS WHERE INDICATED ON PLANS AND AS REQUIRED BY SECTION 717.6.2.1 OF THE 2018 IBC. INSTALL FIRE DAMPERS SMOKE DAMPERS AND FIRE/SMOKE DAMPERS IN ACCORDANCE WITH THE MANUFACTURERS INSTRUCTIONS, THE TERMS OF THEIR LISTING, AND THE REQUIREMENTS OF THE CODE.

9. PIPING PENETRATIONS OF FIRE RATED WALLS OR FLOORS SHALL BE SLEEVED AND FIRE STOPPED WITH LISTED MATERIALS SO AS TO MAINTAIN THE INTEGRITY AND RATING OF THE FLOOR OR

WALL.

10. HVAC EQUIPMENT, VALVES AND DAMPERS SHALL BE LOCATED IN EASILY ACCESSIBLE LOCATIONS. UNLESS SHOWN ON ARCHITECTURAL DRAWINGS, REQUIRED ACCESS PANELS SHALL BE PROVIDED AND INSTALLED BY THE GENERAL CONTRACTOR. MINIMUM ACCESS DOOR SIZE FOR VALVES AND DAMPERS TO BE 18" X 18".

11. WITHIN 90 DAYS AFTER THE DATE OF SYSTEM ACCEPTANCE, RECORD DRAWINGS OF THE ACTUAL INSTALLATION TO BE PROVIDED TO THE BUILDING OWNER. RECORD DRAWINGS SHALL INCLUDE AS A MINIMUM THE LOCATION AND PERFORMANCE DATA ON EACH PIECE OF EQUIPMENT, GENERAL CONFIGURATION OF DUCT AND PIPE DISTRIBUTION SYSTEM, INCLUDING SIZES, AND THE TERMINAL

AIR AND WATER DESIGN FLOW RATES.

12. OPERATING AND MAINTENANCE MANUALS TO BE PROVIDED TO THE BUILDING OWNER THAT INCLUDE: SUBMITTAL DATA, NAMES AND ADDRESSES OF AT LEAST ONE SERVICE AGENCY, HVAC CONTROLS SYSTEM MAINTENANCE AND CALIBRATION INFORMATION AND A COMPLETE OPERATIONAL NARRATIVE FOR EACH SYSTEM.

13. COMMISSIONING IS REQUIRED ON THIS PROJECT IN ACCORD WITH 2018 WASHINGTON STATE ENERGY CODE (WSEC), COMMERCIAL PROVISIONS AND SECTION C408.

14. A COMPLETE REPORT OF TEST PROCEDURES AND RESULTS SHALL BE PREPARED AND FILED WITH THE OWNER

15. SHAFT WALLS CONSTRUCTED TO SUPPORT AIR MOVEMENT FOR RETURN AIR SYSTEMS AND STAIR & ELEVATOR PRESSSURIZATION SYSTEMS SHALL BE CONSTRUCTED TO THE FOLLOWING

STANDARDS:

A. SHAFTS (RATED FOR MAXIMIUM 2" WC) SHALL BE CONSTRUCTED TO WITHSTAND 15 PSF LOADING WITH A DEFLECTION OF L/360 (UNO).

B. SHAFTS SHALL BE SEALED SUBSTANTIALLY AIR-TIGHT USING THE CRITERIA FROM THE 2018 INTERNATIONAL BUILDING CODE:

1. SECTION 715.6 FIRE RESISTANT JOINT SYSTEMS IN SMOKE BARRIERS: LEAKAGE SHALL NOT EXCEED 5 CFM PER LINEAR FOOT OF JOINT AT 0.3" WC.

2. SECTION 909.5 SMOKE BARRIER CONSTRUCTION FOR INTERIOR EXIT STAIRWAYS AND EXIT PASSAGEWAYS: MAXIMUM ALLOWABLE LEAKAGE AREA PER SHAFT SHALL NOT EXCEED

(0.00035 SF/SF)

C. STAIR AND ELEVATOR PRESSURIZATION SHAFTS SHALL BE PRESSURE TESTED DURING COMMISIONING. CONTRACTOR SHALL MAKE MODIFCATIONS TO INSTALLATION UNTIL SHAFT IS IN

COMPLIANCE.

16. DAMPERS USED FOR OUTDOOR AIR INTAKE, EXHAUST, OR RELIEF SHALL HAVE THE FOLLOWING MAXIMUM LEAKAGE RATES AT 1" W.G. (PER AMCA STANDARD 500D): MOTORIZED DAMPERS: 4 CFM/S.F. GRAVITY DAMPERS: 20CFM/S.F. (40 CFM/S.F. FOR DAMPERS SMALLER THAN 24" IN EITHER DIMENSION) PER 2018 WSEC C403.7.8.3.

17. OUTSIDE AIR INTAKE, EXHAUST, AND RELIEF DAMPERS SERVING CONDITIONED SPACES MUST BE MOTORIZED (FAIL CLOSED) PER WSEC, COMMERCIAL PROVISIONS, 2018 WSEC SECTION C403.7.8.

EXCEPT AS ALLOWED BY WSEC.

18. MATERIALS WITHIN PLENUMS SHALL BE NONCOMBUSTIBLE OR SHALL BE LISTED AND LABELED AS HAVING A FLAME SPREAD INDEX OF NOT MORE THAN 25 AND A SMOKE-DEVELOPED INDEX OF NOT MORE THAN 50 WHEN TESTED IN ACCORDANCE WITH ASTM E 84 OR UL 723, EXCEPT AS NOTED IN SECTION 602.2.1 OF THE 2018 IMC.

LEGAL DESCRIPTION

PARCEL NUMBER: 28040300400300

LEGAL DESCRIPTION: SEC 03 TWP 28 RGE 04LOT 1 OF SEAWAY CENTER TWO/INTERMIC BSP REC VOL 1 PGS 181 THRU 183 AF 8910255009 & BEING PTN SE1/4

SCOPE OF WORK

INSTALL (1) NEW ROOFTOP EXHAUST FAN

INSTALL (2) NEW SINGLE DUCT TERMINAL UNITS

INSTALL NEW ARGON GAS PIPING PER PLANS

MISC. DUCTWORK PER PLANS

DRAWING SHEET INDEX - HVAC

NUMBER TITLE

TM0.01 SCHEDULES

TM0.02 SCHEDULES

TM0.01S SITE PLAN

TM2.01A 1ST FLOOR PARTIAL PLAN - HVAC

TM2.02A 2ND FLOOR PARTIAL PLAN - HVAC

TM2.03A ROOF PARTIAL PLAN - HVAC

TF2.01A 1ST FLOOR PARTIAL PLAN - FITTING

TM3.01 ELEVATIONS

TM6.01 DETAILS

CONTACT LIST

TITLE NAME COMPANY PHONE NUMBER EMAIL

PROJECT DESIGN ENGINEER ATTICUS ZBOROWSKI MACDONALD MILLER 206-768-4130 ATTICUS.ZBOROWSKI@MACMILLER.COM PROJECT EXECUTIVE KEVIN ANWAY MACDONALD MILLER 206-768-4102 KEVIN.ANWAY@MACMILLER.COM SPECIAL PROJECTS COORDINATOR RYAN MILLER MACDONALD MILLER 206-519-4378 RYAN.MILLER@MACMILLER.COM SHEETMETAL SUPERINTENDENT NATHAN WAAGEN MACDONALD MILLER 206-768-3942 NATHAN.WAAGEN@MACMILLER.COM CONTROLS SPECIALIST SUPERVISOR ADAM KLETT MACDONALD MILLER 206-768-4174 ADAM.KLETT@MACMILLER.COM ELECTRICAL SUPERINTENDENT DAVE GOFF MACDONALD MILLER 206-510-6481 DAVE.GOFF@MACMILLER.COM PROJECT START UP TIM ANDERSON MACDONALD MILLER 206-768-4168 TIM.ANDERSON@MACMILLER.COM COMMISSIONING FOREMAN BRIAN WHEELER MACDONALD MILLER 206-571-2659 BRIAN.WHEELER@MACMILLER.COM PIPING SUPERINTENDENT RYAN MARTIN MACDONALD MILLER 206-423-5233 RYAN.MARTIN@MACMILLER.COM

GENL. SUPT. JIM WELTON 206-501-9847

GENL. PROJ. MGR. ANDY FORTINO 206-851-9551

EXISTING DEDICATED OUTSIDE AIR SYSTEM UNIT SCHEDULE

SUPPLY DX COOLING GAS HEATING ELECTRICAL DIMENSIONS

UNIT MFGR MODEL LOCATION MAX MIN QTY QTY ESP REFRIGERANT EER/ TOTAL SENSIBLE EAT LAT INPUT OUTPUT EAT LAT SCCR L W H WT

NO. FAN OSA IN IEER CAPACITYCAPACITY DB/WB DB/WB DB DB

CFM CFM (HP) (BHP) WG (MBH) (MBH) (°F) (°F) MBH MBH (°F) (°F) STAGES VOLT/PH MCA MOP (kAIC) (IN) (IN) (IN) LBS NOTES HVU-1-01 VALENT VPR-352-30E-120I-C-5GX ON GRADE 6,750 6,000 2 (15) 2 (12.8) 3 R-410A 11 / 15.9 395.6 339.7 78.2 / 65.4 59.9 / 58.1 1200 960 21 71 10:1 460/3 106.3 110 65 185 96 99.5 7,760 EXISTING, 1-15, 16 HVU-1-02 VALENT VPR-352-30E-120I-C-5GX ON GRADE 17,000 6,400 2 (15) 2 (12.8) 3 R-410A 11 / 15.9 395.6 339.7 78.2 / 65.4 59.9 / 58.1 1200 960 21 71 10:1 460/3 106.3 110 65 185 96 99.5 7,760 EXISTING, 1-15 HVU-1-03 VALENT VPR-352-30E-120I-C-5GX ON GRADE 17,000 6,400 2 (15) 2 (12.8) 3 R-410A 11 / 15.9 395.6 339.7 78.2 / 65.4 59.9 / 58.1 1200 960 21 71 10:1 460/3 106.3 110 65 185 96 99.5 7,760 EXISTING, 1-15

NOTES:

1. POWER WIRING AND DISCONNECT BY ELECTRICAL CONTRACTOR.

2. FACTORY MOUNTED VARIABLE FREQUENCY DRIVE PROVIDED TO DRIVE TWO FAN MOTORS. A COMMON SIGNAL FROM THE BMS SHALL PROVIDE VFD SPEED CONTROL. VFD MODEL: ABB ACS320.

3. HORIZONTAL SUPPLY AND RETURN CONNECTIONS.

4. UNIT MOUNTED ON 4" CONCRETE HOUSEKEEPING PAD.

5. SUPPLY FANS ARE RIGIDLY MOUNTED WITHIN UNIT - NO VIBRATION ISOLATION PROVIDED.

6. HIGH TURN DOWN, MODULATING GAS FURNACE CONTROLLED OFF DISCHARGE AIR TEMPERATURE SENSOR (FACTORY PROVIDED). SEE SEQUENCE OF OPERATIONS.

7. GAS PRESSURE REGULATOR BY MECHANICAL CONTRACTOR.

8. CONTROL THROUGH DDC SYSTEM WITH BACNET COMMUNICATION CAPABILITIES.

9. 4" MERV 14 FILTERS & 2" MERV 8 PRE-FILTERS.

10. LOW LEAKAGE ECONOMIZER MODULATING DAMPERS WITH FACTORY PROVIDED AIR FLOW MEASURING STATION. GREENHECK MODEL AMD-23.

11. DOUBLE WALL CONSTRUCTION WITH 2" FOAMINJECTED INSULATION FOR CASING

12. SEPARATE 120V/1PH POWER FEED FOR GFI CONVENIENCE OUTLET RECEPTACLE. POWER WIRING BY ELECTRICAL CONTRACTOR.

13. MAGNEHELIC GAUGE FOR PRE-FILTER AND FINAL-FILTER.

14. CONTROLS PROVIDED AND INSTALLED BY CONTROLS CONTRACTOR.

15. CONTROLS CONTRACTOR TO INTERLOCK UNIT WITH EXISTING SMOKE DETECTION SYSTEM TO AUTOMATICALLY SHUTDOWN UNIT.

16. CONNECT SUPPLY AND RETURN AIR DUCTWORK TO UNIT AS SHOWN ON PLANS. PROVIDE NEW OSA HOOD TO UNIT. MECHANICAL CONTRACTOR SHALL PROVIDE COMMISSION/START UP OF UNIT.

EXHAUST FAN SCHEDULE

UNIT FAN WT

NO. AREA SERVED MFG & MODEL NO. TYPE CFM ESP RPM FLA FEG BHP HP VOLT/PH BDD LBS NOTES

EF-R-18 ANALYTIC LAB 123 GREENHECK G-143HP-VG CENT. DB 1,080 2.0 2,122 11.3 3/4 115/1 - 95 EXISTING, 1, 7, 8 EF-R-19 NA/CHEM LAB 125 COOK 135TCNHBLE10M TUBULAR CENT 2,400 2.0 2,817 3 460/3 - 1093 EXISTING, 1, 6 EF-R-20 NA/CHEM LAB 125 & TREAT COOK 135TCNHBLE09M TUBULAR CENT 1,500 2.0 2,568 3 460/3 - 1049 EXISTING, 1, 6 EF-R-21 RADIOCHEM LAB 124 GREENHECK CSW-12-BI-21-10-II-50 UTILITY 2,400 6.4 3,809 7.6 5 460/3 - 243 EXISTING, 1, 2, 3, 4, 5 EF-R-25 TAT LABS 127-129 COOK 150 CPS-A CL2 CENT. UB 4,100 7 3,340 10 460/3 - 2210 EXISTING EF-R-26 TAT LABS 127-129 COOK 150 CPS-A CL2 CENT. UB 4,100 7 3,340 10 460/3 - 2210 EXISTING EF-R-27 TAT LABS 127-129 COOK 150 CPS-A CL2 CENT. UB 4,100 7 3,340 10 460/3 - 2210 EXISTING EF-R-28 130-SN-1 COOK 100 TCNHBLE-05 TUBULAR CENT 500 1 2,556 1/2 460/3 - 704 EXISTING EF-R-29 MCFR CONTROLLED GREENHECK USF-409-10-BI-II-30 CENT. UB 1050 6 3600 - 3 460/3 - 199 EXISTING, 1, 3, 9, 10 EF-R-30 FUME HOOD FH-104 GREENHECK USF-10 UTILITY 1,290 1.4 2186 - 3/4 460/3 - 127 EXISTING,1, 3, 9, 11, 12 EF-R-31 UPS ROOM 102 COOK ACRU-B CENT. UB 750 0.5 1,368 5.8 1/4 115/1 - 90 EXISTING, 1, 13, 14 EF-R-32 IES MODULES COOK ACRU-B CENT. UB 750 0.5 1,368 5.8 1/4 115/1 - 90 EXISTING, 1, 13 EF-R-33 FUME HOOD FH-129 COOK 135 CPA UTILITY 1,300 1.5 1900 2.1 1 460/3 - 146 EXISTING, 5, 15-18 EF-R-34 DU LAB CDD 400ECO UTILITY 4,200 2.5 1,725 - - 2.9 5 460/3 - 88 NEW, 1-3, 19-20

NOTES:

1. POWER WIRING AND DISCONNECT SWITCH BY ELECTRICAL CONTRACTOR.

2. CONTROL CONTRACTOR TO INTERLOCK FAN TO BUILDING EMS DDC CONTROLS.

3. HAZARDOUS EXHAUST FAN SYSTEM, THUS ELIMINATING MOTORIZED DAMPER PER 2015 WSEC C403.2.4.4 EXCEPTION.

4. FACTORY OPTIONS:

- UTILITY SET WITH UP BLAST CONFIGURATION AND VELOCITY STACK

- BOTTOM DRAIN PLUG

- WEATHER COVER

- BACKWARD INCLINED WHEEL

- EXHAUST SUPPORTS W/ 1" DEFLECTION SEISMIC VIBRATION ISOLATORS

- SPARK B CONSTRUCTION

- COATED W/ HI-PRO POLYESTER, CONCRETE GRAY, FAN & DAMPERS

- SHAFT SEAL W/ RUB RING

- PREMIUM EFFICIENCY MOTOR WITH BELT DRIVE.

5. CONTINUOUS OPERATION WITH CONNECTION TO EMERGENCY POWER SYSTEM.

6. EXISTING WALL SWITCH IN ROOM TO TURN FAN ON/OFF.

7. FACTORY OPTIONS:

- 18" GREENHECK ROOF CURB

- MOTORIZED DAMPER 115 VAC (LOW LEAKAGE W/ END SWITCH)

- VARI-GREEN EC MOTOR WITH REMOTE DIAL WALL MOUNTED POTENTIOMETER

- SWITCH, NEMA 1, TOGGLE, JUNCTION BOX MOUNTED & WIRED

- BIRDSCREEN

8. ELECTRICAL CONTRACTOR TO INTERLOCK MOTORIZED DAMPER TO EXHAUST FAN. DAMPER TO OPEN WHEN FAN OPERATES.

ELECTRICAL CONTRACTOR TO ALSO INTERLOCK VARI-GREEN EC MOTOR REMOT DIAL WALL MOUNTED POTENTIOMETER FURNISHED BY M.C. AND INSTALLED BY EC.

9. FACTORY OPTIONS:

- UP BLAST CONFIGURATION

- BOTTOM DRAIN PLUG

- WEATHER COVER

- BACKWARD INCLINED WHEEL

- EXHAUST SUPPORTS W/ 1" DEFLECTION SEISMIC VIBRATION ISOLATORS

- SPARK B CONSTRUCTION

- COATED W/ HI-PRO POLYESTER, CONCRETE GRAY, FAN & DAMPERS

- SHAFT SEAL W/ RUB RING

- VARI-GREEN EC MOTOR PREMIUM EFFICIENCY.

10. ELECTRICAL CONTRACTOR TO PROVIDE WALL SWITCH IN ROOM TO TURN FAN ON/OFF. LOCATION OF SWITCH TO BE OWNER APPROVED.

11. VFD WITH BY-PASS IN NEMA 3 ENCLOSURE PROVIDED BY M.C. VFD CONNECTION AND LOCAL FAN SWITCHING BY E.C.

12. SERVES OWNER PROVIDED HOOD, FH-104. AIR BALANCE HOOD WITH SASH OPENING AT 28 INCHES OPEN TO PROVIDE APPROXIMATELY 12 S.F. OPEN AREA.

13. FACTORY OPTIONS:

- UP BLAST CONFIGURATION

- AMCA SPARK A CONSTRUCTION

- RCA 13.5 INCH ROOF CURB WITH DAMPER TRAY

- ALUMINUM CONSTRUCTION

- BIRDSCREEN

- VIBRATION ISOLATORS

14. HYDROGEN MONITOR AND LOCAL ALARM SYSTEM MODEL SBS-H2 (PROVIDED BY OTHERS AND INSTALLED BY MM).

15. WITH PREMIUM EFFICIENCY MOTOR AND NON-BY PASS VARIABLE FREQUENCY DRIVE, VFD-1 (SEE VFD SCHEDULE).

16. WITH ALUM ACC DOOR-BOLT, ALUM. DRAIN, OSHA BG/WEATER COVER- STL. AND ROTARY BELT TENSIONER.

17. FAN TO OPERATE 24/7 - NO BMS CONNECTION REQUIRED.

18. POWER WIRING BY E.C. NOTE: POWER DISCONNECT PROVIDED IN VFD-1.

19. FACTORY OPTIONS:

- UTILITY SET WITH UP BLAST CONFIGURATION AND MC TO FABRICATE ALUMINUM VELOCITY STACK WITH HANDLES FOR REMOVAL

- POLYPROPYLENE FAN WITH TEFC MOTOR AND PVC MOTOR COVER

- NON FERROUS FAN CONSTRUCTION

- MC TO FABRICATE SLED FOR MOUNTING ON SLEEPERS PROVIDED BY GC

- BOTTOM DRAIN TROUGH

- FACTORY PROVIDED NEMA-4 VFD CONTROLLER WITH DISCONNECT SWITCH

- BACKWARD INCLINED WHEEL

- FACTORY PRIVIDED SPRING ISOLATORS

20. VFD PROVIDED BY FACTORY. VFD CONNECTION AND LOCAL FAN SWITCHING BY E.C.

HOOD SCHEDULE

UNIT AREA EXHAUST FAN EXH SUPPLY SUPPLY EXH

NO. SERVED INTERLOCK MFG & MODEL NO. DIMENSIONS CFM CFM ESP COLLAR SIZE COLLAR SIZE NOTES

FH-101 - EF-R-21 LABCONCO PROTECTOR 96/36/102 1200 - 0.5 - 2-12" EXISTING, 1, 2, 3 FH-102 - EF-R-21 LABCONCO PROTECTOR 96/36/102 1200 - 0.5 - 2-12" EXISTING, 1, 2, 3

FH-103 - EF-R-19 LABCONCO PROTECTOR 96/36/102 1200 - 0.5 - 14" EXISTING, 1, 2, 3

FH-104 - EF-R-30 KEWAUNEE SUPREME AIR 72/54 1290 - 0.4 - 12" EXISTING, 1, 4, 5

FH-105 - EF-R-20 LABCONCO PROTECTOR 96/36/102 1200 - 0.5 - 14" EXISTING, 1, 2, 3

FH-129 - EF-R-33 LABCONCO PROTECTOR 72/-/- 1300 - - - - EXISTING, 2, 4-6

FH-130 DU LAB EF-R-34 - 48/-/- 800 - - - - NEW, 1-2

FH-131 DU LAB EF-R-34 - 48/-/- 800 - - - - NEW, 1-2

FH-132 DU LAB EF-R-34 - 48/-/- 800 - - - - NEW, 1-2

FURNACE EXHAUST DU LAB EF-R-34 - - 1200 - - - - -

NOTES:

1. OWNER PROVIDED AND INSTALLED.

2. FIELD TO VERIFY MAKE AND MODEL.

3. BALANCER SHALL SET SASH HEIGHT TO 18" AND TEST HOOD VELOCITY AT 100 FPM.

4. BALANCER SHALL SET SASH HEIGHT TO 28" AND TEST HOOD VELOCITY AT 100 FPM.

5. OWNER PROVIDED AND RELOCATED BY OTHERS. VERIFY EXACT LOCATION. MMFS TO ASSIST IN REASSEMBLY

6. E.C. TO PROVIDE POWER WIRING, DISCONNECT AND LOCAL FAN CONTROL.

SERVER ROOM LOAD MATRIX - UPS BASED

GENERAL INFORMATION

ROOM # AREA (SF) LIGHTS (W/SF) PEOPLE (#) NOTES

WAR ROOM 910 0.8 8

CUSTOMER INFORMATION

UNIT MFG & MODEL NO. NOM. KVA MAX LOADING POWER FACTOR MAX HEAT

LOAD (BTU)

MAX HEAT

LOAD (KW) SENS. TONS

GLVBX #1 UPS - 2.4 70% 100% 5734 1.7 0.5 2

GLVBX #2 UPS - 2.4 70% 100% 5734 1.7 0.5 2

TOTAL: 17202 5.0 1.4

LOAD EVALUATION

LOADS (BTU) (KW) SENS. TONS

TOTAL MAXIMUM LOAD: 17202 5.0 1.4

NOTES:

1. NO REDUNDANT CAC UNITS HAVE BEEN PROVIDED.

2. LOAD VALUES RECEIVED FROM TERRA POWER 9-29-22

HUMIDITY CONTROL NO

N+1 REDUNDANCY NO

AUTO SWITCH-OVER NO

EXTERNAL ALARMING/MONITORINGNO

FM 200 SYSTEM NO

HYDROGEN GAS MONITORINGNO

APPROVED BY: _____________________________________________________________ DATE: ________________

DUCTWORK SCHEDULE

WORKING SMACNA SMACNA

SERVICE / PRESSURE PRESSURE SEAL

USAGE LOCATION MATERIAL (IN. WC) CLASS (IN. WC) CLASS NOTES

OUTDOOR AIR INTAKE BETWEEN AMBIENT AND AHU GALV. STEEL 0.5 1 B 1

MEDIUM PRESSURE SUPPLY AIR BETWEEN AHU AND TERMINAL UNITS GALV. STEEL 2.5 4 A 1

LOW PRESSURE SUPPLY AIR FROM TERMINAL UNITS TO GRD'S GALV. STEEL 1 1 B 1

FLEXIBLE DUCT CONN TO GRD'S PREINSUL. FLEX 0.5 RATED +6", -1" NA 2, 3

RETURN AIR FROM GRD'S TO AHU GALV. STEEL 1 1 B 1

GENERAL EXHAUST FROM GRD TO FAN AND AMBIENT GALV. STEEL 1 1 B 1

HAZARDOUS EXHAUST FROM FUME HOODS TO EXHAUST FAN 20-24 GA GALV. STEEL 1 1 B 1

NOTES:

1. SHEET METAL GAUGES AND FITTINGS PER SMACNA AND MACDONALD-MILLER DUCT CONSTRUCTION STANDARDS.

2. THERMAFLEX "GKM" OR EQUAL, WITH 12 FOOT MAXIMUM LENGTH.

3. INSTALL PER MFG. GUIDELINES AND INSTRUCTIONS.

AIR TERMINAL SCHEDULE

TAG MANUFACTURER & MODEL

NUMBER SIZE TYPE NOTES

SHOEMAKER HL AS NOTED ARCH T-BAR HIGH VOLUME PLAQUE DIFFUSER MATCH TO EXISTING

SHOEMAKER 903 AS NOTED DOUBLE DEFLECTION SIDEWALL DIFFUSER MATCH TO EXISTING

ROOM PRESSURIZATION & AIR FLOW MATRIX

/H R

M (T

DU LAB LABORATORY 910 16 14560 0 0 0 90 N 3750 15 3750 15 4200 -450

ABBREVIATIONS:

N = NEGATIVE

P = POSITIVE

NA = NOT APPLICABLE

E = EQUAL OR NEUTRAL

SIZE

CFMA

SIZE

CFMB

SINGLE DUCT VAV BOX SCHEDULE

UNIT MFG & INLET VALVE CFM ELECTRIC HEAT

CONTROLNO. AREA SERVED MODEL NO. SIZE MAX MIN KW STAGES NOTES

VAV-1-01 ANALYTIC LAB 123 PRICE DESV 10 980 590 - - 24V EXISTING 1-3

VAV-1-02 DU LAB PRICE SDV 16 3750 3750 24 SCR 24V NEW, 1, 10, 11

VAV-1-07 WAREHOUSE NORTH PRICE SDV5 - - - - - - FUTURE

VAV-1-06 WAREHOUSE SOUTHEAST PRICE SDV 14 3000 2250 - - 24V NEW, 1, 11

VAV-1-08 WAREHOUSE NORTH PRICE SDV5 - - - - - - FUTURE

VAV-1-09 WAREHOUSE NORTH EXTERIOR PRICE SDV5 24x16 5000 3000 - - 24V EXISTING 1-3

VAV-1-10 MICROSCOPY LAB 124 PRICE SDV5 4 150 150 - - 24V EXISTING 1-3

SVAV-1-01 TAT GENERAL LAB 127 ANTEC (PRICE) VDX 214 30x15 3615 2000 - - FACTORY EXISTING, 1-3 SVAV-1-02 TAT GENERAL LAB 127 ANTEC (PRICE) VDX 114 14 1785 975 - - FACTORY EXISTING, 1-3 SVAV-1-03 TAT COMP LAB 129 ANTEC (PRICE) VDX 114 14 1700 925 - - FACTORY EXISTING, 1-3 SVAV-1-04 TAT COMP LAB 128 ANTEC (PRICE) VDX 114 14 1700 925 - - FACTORY EXISTING, 1-3 SVAV-1-05 RADIOCHEM LAB 124 ANTEC (PRICE) VDX 214 30x15 2100 2100 - - FACTORY EXISTING, 1-3 SVAV-1-06 NA/CHEM LAB 125 PRICE SDV5 24x16 3400 2040 - - FACTORY EXISTING 1-3

SVAV-1-07 LOBBY ANTEC (PRICE) VFX 108 8 125 125 - - FACTORY EXISITNG, 1-4, 7

SVAV-1-8 R&D 2 ANTEC (PRICE) VFX 108 8 251 251 - - FACTORY EXISITNG, 1-3, 5, 7

SVAV-1-09 TECH ANTEC (PRICE) VFX 108 8 307 307 - - FACTORY EXISITNG, 1-4, 7

SVAV-1-10 R&D 1 ANTEC (PRICE) VFX 108 8 436 436 - - FACTORY EXISITNG, 1-4, 7

EVAV-1-01 TAT GENERAL LAB 127 ANTEC (PRICE) VV 214 30X15 3615 2000 - - FACTORY EXISTING 6, 9 EVAV-1-02 TAT GENERAL LAB 127 ANTEC (PRICE) VV 114 14 1785 975 - - FACTORY EXISTING 6, 9 EVAV-1-03 TAT GENERAL LAB 127 ANTEC (PRICE) VV 114 14 1700 925 - - FACTORY EXISTING 6, 9 EVAV-1-04 TAT GENERAL LAB 127 ANTEC (PRICE) VV 114 14 1700 925 - - FACTORY EXISTING 6, 9 EVAV-1-05 TAT CGMP LAB 128 ANTEC (PRICE) VV 214 30X15 4250 1865 - - FACTORY EXISTING 6, 9 EVAV-1-06 TAT CGMP LAB 129 ANTEC (PRICE) VV 114 14 1950 840 - - FACTORY EXISTING 6, 9

EVAV-1-07 LOBBY ANTEC (PRICE) VV 108 8 178 178 - - FACTORY EXISITNG, 1-4, 6,7

EVAV-1-8 R&D 2 ANTEC (PRICE) VV 108 8 280 280 - - FACTORY EXISITNG, 1-4, 6,7

EVAV-1-09 TECH ANTEC (PRICE) VV 108 8 410 410 - - FACTORY EXISITNG, 1-4, 6,7

EVAV-1-10 R&D 1 ANTEC (PRICE) VV 108 8 210 116 - - FACTORY EXISITNG, 1-4, 6,7

EVAV-1-11 HC R & D 2 ANTEC (PRICE) VV 108 8 80 80 - - FACTORY EXISTING, 1-4, 6,7,8 EVAV-1-12 GB R & D 2 ANTEC (PRICE) VV 108 8 35 35 - - FACTORY EXISTING, 1-4, 6,7,8 EVAV-1-13 GB R & D 1 ANTEC (PRICE) VV 108 8 35 35 - - FACTORY EXISTING, 1-4, 6,7,8 EVAV-1-14 HC R & D 1 ANTEC (PRICE) VV 108 8 490 395 - - FACTORY EXISTING, 1-4, 6,7,8 EVAV-1-15 GB R & D 1 ANTEC (PRICE) VV 108 8 35 35 - - FACTORY EXISTING, 1-4, 6,7,8

EVAV-1-16 TECH ANTEC (PRICE) VV 108 8 405 405 - - FACTORY EXISITNG, 1-4, 6,7

NOTES:

1. POWER WIRING AND DISCONNECT SWITCH BY ELECTRICAL CONTRACTOR.

2. FIBRE FREE INSULATION.

3. CONTROL WIRING BY CONTROLS CONTRACTOR. PROVIDE WITH PACE CONTROLLER BACNET MS/TP INTERFACE.

4. HORIZONTAL CONFIGURATION

5. VERTICAL CONFIGURATION

6. PHENOLIC COATING (HERESITE CLASS 2)

7. VALVE PRESSURE SWITCH

8. VALVE TO OPERATE ON COMECER SIGNAL FOR AIRFLOW ADJUSTMENT TO COMPENSATE FOR HOT CELL VARIOUS OPERATING SCENARIOS.

9. ALL FUME HOOD VALVES TO INCLUDE FUME HOOD CONTROLLER, FUME HOOD MONITOR WITH DIGITAL DISPLAY, SASH POSITION SENSOR AND SIDEWALL SENSOR.

10. VAV DAMPER TO BE SET TO FAIL OPEN

11. CC TO PROVIDE DDC INTERFACE

OWNER PROVIDED GLOVE BOX

UNIT AREA EXHAUST FAN MFG & EXH EXH NOTES

NO. SERVED INTERLOCK MODEL NO. DIMENSIONS CFM COLLAR SIZE

GB-1 DU LAB EF-R-34 - - 200 - NEW, 1-2

GB-2 DU LAB EF-R-34 - - 200 - NEW, 1-2

GB-3 DU LAB EF-R-34 - - 200 - NEW, 1-2

NOTES:

1. OWNER PROVIDED AND INSTALLED

2. FIELD TO VERIFY MAKE AND MODEL

E R

ENGINEER:

CHECKED BY:

CAD:

LAST REVISED:

DATE PLOTTED:

ISSUE DATE:

SHEET NUMBER:

E R

DRAWING NUMBER:

T er ra P ow er

E ve re tt

K A\

En gi ne er in g\ D

W G

\S ht s\

.d w g W ed ne sd ay

, A pr il

, 2

DPD STAMP

M ac

D on al d-

M ille r

N S w w w .m ac m ille r.c om

In tl.

B lv d.

S ui te

, S ea

Ta c, W A

Ph on e:

-7

-9

R A

T, W

O R

D D

D-3984-72225020-00

A ZBOROWSKI

G GRAHAM

F MAMERTO

04-11-23

11-04-22

-0

/C D

-1

O R

D S

TM0.01

X X X X X X

X X X

AHU-001

NO2

14x12 SA

14x12 SA-SL

12ø SA

12ø SA-W

14x12ø SA

14x12ø SA-W

14x12 SA

14x12 SA-W

XXXXXXXXX xxxxxxxx

14x12 SA

14x12 SA-Q

14x12 SA-C

14x12 SA-DB

24ø

24x24

14ø 14ø

MECHANICAL GENERAL ABBREVIATIONS

ABBV FULL NAME ABBV FULL NAME ABBV FULL NAME

AC AIR CONDITIONING UNIT FCU FAN COIL UNIT NOM NOMINAL

AFF ABOVE FINISHED FLOOR FD FIRE DAMPER NTS NOT TO SCALE

AHU AIR HANDLING UNIT FLA FULL LOAD AMPS OBD OPPOSED BLADE DAMPER

AL ALUMINUM FOB FLAT ON BOTTOM OD OUTSIDE DIMENSION

BAS BUILDING AUTOMATION SYSTEM FOT FLAT ON TOP POC POINT OF CONNECTION

BDD BACK DRAFT DAMPER FSD FIRE SMOKE DAMPER PRV PRESSURE REDUCING VALVE

BI BLACK IRON GALV GALVANIZED PVC POLYVINYL CHLORIDE

BOD BOTTOM OF DUCT GC GENERAL CONTRACTOR REQ’D REQUIRED

BOTT BOTTOM GENX GENERATOR EXHAUST RPBA REDUCED PRESSURE BACKFLOW ASSY

BTU BRITISH THERMAL UNITS GLVNL GALVANNEAL RTU ROOFTOP UNIT

BTUH BRITISH THERMAL UNITS PER HOUR GPM GALLONS PER MINUTE SA SUPPLY AIR

CAT1 CATEGORY ONE VENT GREASE GREASE DUCT SD SMOKE DAMPER

CAT4 CATEGORY FOUR VENT GWB GYPSUM WALL BOARD SL SOUND LINED

CFM CUBIC FEET PER MINUTE HP HORSE POWER, HEAT PUMP SM SHEET METAL

CPVC CPVC MATERIAL HVAC HEATING, VENTILATION AND AIR COND. SP STATIC PRESSURE

DB DUCTBOARD HX HEAT EXCHANGER SS STAINLESS STEEL

DDC DIRECT DIGITAL CONTROLS ID INSIDE DIMENSION SUSP SUSPENDED

DEMO DEMOLISH LAT LEAVING AIR TEMPERATURE T THERMOSTAT

DIFF DIFFUSER LBS POUNDS TOD TOP OF DUCT

DMPR DAMPER LWT LEAVING WATER TEMPERATURE TV TURNING VANES

DN DOWN MAT MIXED AIR TEMPERATURE TYP TYPICAL

E EXISTING MBH ONE THOUSAND BTUH UNO UNLESS NOTED OTHERWISE

EAT ENTERING AIR TEMPERATURE MCA MINIMUM CIRCUIT AMPACITY VAV VARIABLE AIR VOLUME

EC EGGCRATE MD MOTORIZED DAMPER VD VOLUME DAMPER

EER ENERGY EFFICIENCY RATIO MIN MINIMUM VFD VARIABLE FREQUENCY DRIVE

EF EXHAUST FAN M-M MACDONALD-MILLER W DUCT INSULATION WRAP

ELEV ELEVATION NC NORMALLY CLOSED W/ WITH

ESP EXTERNAL STATIC PRESSURE NIC NOT IN CONTRACT WELD WELDED

EWT ENTERING WATER TEMPERATURE NO NORMALLY OPEN Ø VOLTAGE PHASE & DUCT DIAMETER

HVAC SYSTEM ABBREVIATIONS

ABBV FULL NAME ABBV FULL NAME ABBV FULL NAME

COMB-GALV COMBUSTION AIR EA AL EXHAUST ALUMINUM OA OUTSIDE AIR

SA SUPPLY AIR LP EA SS EXHAUST SS 304 OA-KOOL OUTSIDE AIR KOOLDUCT

SA-KOOL SUPPLY AIR LP KOOLDUCT EA AL WELD EXHAUST ALUMINUM WELDED RLF RELIEF AIR

SA AL SUPPLY AIR LP ALUMINUM EA GALV WELD EXHAUST GALV WELDED RA RETURN AIR

SA SS SUPPLY AIR LP SS 304 2B EA GLVNL WELD EXHAUST GALVANNEAL WELDED DB DUCTBOARD SA AL WELD SUPPLY AIR LP ALUMINUM WELDED EA SS WELD EXHAUST SS 304 WELDED FLU-CAT1 FLUE VENT - CATEGORY 1 SA GALV WELD SUPPLY AIR MP GALV WELDED EA BI GREASE EXHAUST GREASE BLACK IRON WELD FLU-CAT4 FLUE VENT - CATEGORY 4 SA GLVNL WELD SUPPLY AIR MP GALVANNEAL WELD EA GALV GREASE EXHAUST GREASE GALV WELDED FLU-CPVC FLUE VENT - CPVC MATERIAL SA SS WELD WELDED SUPPLY AIR LP SS 304 2B EA GALV GREASE EXHAUST GREASE SS 304 WELDED FLU-SS FLUE VENT - SHOP BUILT SS 304

EA EXHAUST AIR MUA MAKE-UP AIR FLU-GALV FLUE VENT - SHOP BUILT GALV

HVAC SYMBOL LEGEND

DESCRIPTION SYMBOL DESCRIPTION SYMBOL

BARE RECTANGULAR SHEETMETAL FLEX DUCT

SOUNDLINE SHEETMETAL (GENERAL NOTES) EQUIPMENT FLEX ROUND CONNECTOR

SHEETMETAL W/ INSULATION (GENERAL NOTES) EQUIPMENT FLEX RECTANGULAR CONNECTOR

BARE ROUND SHEETMETAL SUPPLY DUCT UP/DOWN

ROUND SHEETMETAL W/ INSULATION (GENERAL NOTES) EXHAUST DUCT UP/DOWN

BARE OVAL SHEETMETAL RETURN DUCT UP/DOWN

OVAL SHEETMETAL W/ INSULATION (GENERAL NOTES) SUPPLY AIR TERMINAL RECTANGULAR AND SQUARE

EXAMPLE OF EXISTING RETURN AIR TERMINAL RECTANGULAR AND SQUARE

EXAMPLE OF DEMO EXHAUST AIR TERMINAL RECTANGULAR AND SQUARE

EXAMPLE OF NEW RADIAL AIR TERMINAL

EXAMPLE OF FUTURE (N.I.C.) SUPPLY AIR SLOT DIFFUSER

EXPOSED QUALITY SHEETMETAL RETURN AIR SLOT DIFFUSER

CLEANROOM QUALITY DUCTWORK EXHAUST AIR SLOT DIFFUSER

DUCTBOARD (1" FIBERGLASS) POINT OF CONNECTION

CONTINUATIION OF ROUND DUCT CENTER LINE

CONTINUATION OF RECTANGULAR DUCT THERMOSTAT

AIR FLOW IN SYMBOL CARBON MONOXIDE SENSOR

AIR FLOW OUT SYMBOL NITROGEN DIOXIDE SENSOR

MECHANICAL EQUIPMENT TAG OTHER SENSOR

KEYED NOTE ELECTRICAL SWITCH

ACCESS DOORS MITERED ELBOW WITH TURNING VANES

RATED ENCLOSURE

NOTE: SIZE REFLECTS ACTUAL SHEET METAL DIMENSION AND DOES NOT ACCOUNT FOR INSULATION OR LINING

SEQUENCE OF OPERATION

EF-R-34: EXHAUST FAN

SCHEDULE: 24/7 CONTINOUS OPERATION

SERVES: FUME HOOD FH130, FH-131, FH-132, GB-101, GB-102, GB-103

CONTROL TYPE: STAND ALONE, CONTINUOUS OPERATION

EMERGENCY POWER: YES

SEQUENCE:

FAN SHALL MAINTAIN CONSTANT EXHAUST AIRFLOW BASED ON FUME HOOD AND GLOVE BOX DAMPER POSITIONS THAT WERE SET DURING BALANCING. EXHAUST FAN SHALL OPERATE 24/7, 365

DAYS A YEAR.

VAV-1-02: SINGLE DUCT VAV BOX

SCHEDULE: 24/7 OPERATION

SERVES: DU LAB

CONTROL TYPE: DDC SYSTEM

EMERGENCY POWER: NO, BUT VAV DAMPER SHALL FAIL OPEN IN POWER LOSS EVENT.

SEQUENCE:

PROVIDE CONSTANT VENTILATION AIR DURING OCCUPED HOURS. MECHANICAL COOLING PROVIDED BY HVU-1-01, WHICH WILL MODULATE COOLING AS NECESSARY TO MEET LOAD. IN HEATING, THE SUPPLEMENTAL HEATER WILL MODULATE AS NEEDED TO MAINTAIN THE SETPOINT.

VAV-1-06: SINGLE DUCT VAV BOX

SCHEDULE: MON - FRI 6:00 AM - 6:00 PM, SAT-SUN OFF (ADJUSTABLE)

SERVES: WAREHOUSE SOUTHEAST

CONTROL TYPE: DDC SYSTEM

SEQUENCE:

BOX SHALL MAINTAIN VENTILATION MINIMUM DURING OCCUPIED HOURS, MODULATING HEATING AND COOLING AS NECESSARY TO MAINTAIN TEMPERATURE SETPOINT.

SEQUENCE OF OPERATION

EXISTING DEDICATED OUTDOOR AIR SYSTEM UNITS (HVU-1-02 THRU HVU-1-03)

SCHEDULE: 24/7 CONTINOUS OPERATION

SERVES: BUILDING

CONTROL TYPE: DDC SYSTEM

NOTES: PROVIDES 2015-WASHINGTON STATE MECHANICAL CODE MINIMUM VENTILATION AIR REQUIREMENTS FOR ALL SPACES.

OPERATION SUMMARY: SINCE DOAS UNITS PROVIDE MAKEUP AIR FOR RADIOISOTOPE FUME HOODS WHICH RUN CONTINOUSLY, OCCUPIED MODE SHALL BE SET FOR 24/7, 365 DAYS PER YEAR FOR

CONTINUOUS OPERATION.

SEQUENCE:

VFD'S SHALL MODULATE FAN SPEED FOR VARIABLE VOLUME SUPPLY FANS BASED ON DUCT STATIC PRESSURE SENSORS.

THE BAS SHALL SUPPLY A CONSTANT SUPPLY AIR TEMPERATURE AT ALL TIMES TO ENSURE THAT LAB SPACE TEMPERATURES REMAIN CONSTANT.

UNITS ARE PROVIDED WITH SUPPLEMENTAL GAS HEAT, ECONOMIZER COOLING AND DX COOLING.

SUPPLEMENTAL GAS HEAT TO BE STAGED AND CONTROLLED USING SUPPLY AIR TEMPERATURE SENSOR TO MAINTAIN A CONSTANT SUPPLY AIR TEMPERATURE OF 72°F (ADJ).

ECONOMIZER COOLING AND DX COOLING TO BE CONTROLLED USING SUPPLY AIR TEMPERATURE SENSOR TO MAINTAIN A CONSTANT SUPPLY AIR TEMPERATURE OF 72°F (ADJ).

EXISTING DEDICATED OUTDOOR AIR SYSTEM UNIT (HVU-1-01)

SCHEDULE: 24/7 CONTINOUS OPERATION

SERVES: WAREHOUSE AND DU LAB

CONTROL TYPE: DDC SYSTEM

NOTES: PROVIDES 2018-WASHINGTON STATE MECHANICAL CODE MINIMUM VENTILATION AIR REQUIREMENTS FOR ALL SPACES.

OPERATION SUMMARY: SINCE DOAS UNITS PROVIDE MAKEUP AIR FOR FUME HOODS WHICH RUN CONTINOUSLY, OCCUPIED MODE SHALL BE SET FOR 24/7, 365 DAYS PER YEAR FOR CONTINUOUS OPERATION.

SEQUENCE:

DURING OCCUPIED MODE, THE OUTDOOR AIR DAMPERS AND RETURN AIR DAMPERS SHALL BE OPEN AND MODULATE AS NEEDED. THE VFD'S SHALL MODULATE FAN SPEED FOR VARIABLE VOLUME SUPPLY BASED ON COOLING, HEATING, AND DUCT STATIC PRESSURE SETPOINTS. THE THERMOSTAT IN THE DU LAB SHALL DETERMINE HEATING/COOLING SUPPLY AIR TEMPERATURE NEEDED TO MAINTAIN 72°F SPACE TEMPERATURE, WITH THE WAREHOUSE THERMOSTAT TAKING SECONDARY PRIORITY. IN COOLING MODE, THE UNIT SHALL STAGE THE ECONOMIZER AND DX COOLING AS NEEDED. THE WAREHOUSE VAV'S (CURRENTLY VAV-1-06) WILL MODULATE DOWN TO HVU MINIMUM IF SPACES ARE SATISFIED. IN HEATING MODE, THE GAS HEAT SHALL STAGE AS NEEDED TO MAINTAIN OCCUPIED SETPOINT.

VRF SYSTEM (CU-R-14) AND INDIVIDUAL ZONE CEILING CASSETTES (CC-1-9A THRU CC-1-9D)

SCHEDULE: 24/7 CONTINOUS OPERATION

SERVES: NA/CHEM LAB 125

CONTROL TYPE: PROPRIETARY VRF CONTROLS W/REMOTE WALL MOUNTED THERMOSTAT

DDC SYSTEM INTERFACE: MONITORING AND ALARM ONLY FOR SYSTEM STATUS.

OPERATION SUMMARY: CEILING CASSETTES OPERATE TO MAINTAIN ZONE SPACE TEMPERATURE SETPOINT OF 72°F (ADJ.) INDEPENDENT OF OCCUPANCY SCHEDULE.

DUCTLESS SPLIT SYSTEM HEAT PUMP (CU-R-15/CC-1-10) (CU-R-16/CC-1-11)

SCHEDULE: 24/7 CONTINOUS OPERATION

SERVES: MICROSCOPY LAB 126, ANALYTIC LAB 123

CONTROL TYPE: STAND ALONE W/REMOTE WALL MOUNTED THERMOSTAT

DDC SYSTEM INTERFACE: MONITORING AND ALARM ONLY FOR SYSTEM STATUS.

OPERATION SUMMARY: CEILING CASSETTES OPERATE TO MAINTAIN ZONE SPACE TEMPERATURE SETPOINT OF 72°F (ADJ.) INDEPENDENT OF OCCUPANCY SCHEDULE.

DUCTED SPLIT SYSTEM HEAT PUMP (CU-R-13/FC-1-09)

SCHEDULE: 24/7 CONTINOUS OPERATION

SERVES: RADIOCHEM LAB 124

CONTROL TYPE: STAND ALONE W/REMOTE WALL MOUNTED THERMOSTAT

DDC SYSTEM INTERFACE: MONITORING AND ALARM ONLY FOR SYSTEM STATUS.

OPERATION SUMMARY: FAN COIL UNIT OPERATES TO MAINTAIN ZONE SPACE TEMPERATURE SETPOINT OF 72°F (ADJ.) INDEPENDENT OF OCCUPANCY SCHEDULE.

EF-R-18: EXHAUST FAN

SCHEDULE: MON - FRI 6:00 AM - 6:00 PM, SAT-SUN OFF (ADJUSTABLE)

SERVES: ANALYTIC LAB 123

CONTROL TYPE: WALL MOUNTED SWITCH

NOTES: PROVIDES CONSTANT AIRFLOW

DDC SYSTEM INTERFACE: MONITORING AND ALARM ONLY FOR SYSTEM STATUS.

EMERGENCY POWER: NO

SEQUENCE:

FAN SHALL MAINTAIN CONSTANT EXHAUST AIRFLOW BASED ON BALANCING DAMPER POSITIONS THAT WERE SET DURING BALANCING. FAN SHALL BE OFF DURING UNOCCUPIED HOURS.

INTERLOCK MOTORIZED DAMPER TO OPEN WHEN FAN IS ENERGIZED.

EF-R-19, EF-R-20: EXHAUST FANS

SCHEDULE: MON - FRI 6:00 AM - 6:00 PM, SAT-SUN OFF (ADJUSTABLE)

SERVES: NA/CHEM LAB 125 & TREAT

CONTROL TYPE: WALL MOUNTED SWITCH

NOTES: PROVIDES CONSTANT AIRFLOW

DDC SYSTEM INTERFACE: MONITORING AND ALARM ONLY FOR SYSTEM STATUS.

EMERGENCY POWER: NO

SEQUENCE:

FAN SHALL MAINTAIN CONSTANT EXHAUST AIRFLOW BASED ON FUME HOOD BALANCING DAMPER POSITIONS THAT WERE SET DURING BALANCING. FAN SHALL BE OFF DURING UNOCCUPIED HOURS.

INTERLOCK MOTORIZED DAMPER TO OPEN WHEN FAN IS ENERGIZED.

EF-R-21: EXHAUST FAN

SCHEDULE: 24/7 CONTINOUS OPERATION

SERVES: RADIOCHEM LAB 124 FUME HOODS - FH-101 AND FH-102

CONTROL TYPE: BMS

NOTES: PROVIDES CONSTANT AIRFLOW

DDC SYSTEM INTERFACE: STATUS/ON/OFF

EMERGENCY POWER: YES

SEQUENCE:

FAN SHALL MAINTAIN CONSTANT EXHAUST AIRFLOW BASED ON FUME HOOD BALANCING DAMPER POSITIONS THAT WERE SET DURING BALANCING. FAN SHALL OPERATE 24/7, 365 DAYS A YEAR.

VAV-1-XX, SVAV-1-XX: SINGLE DUCT VAV BOXES

SCHEDULE (SVAV-1-05): 24/7 CONTINOUS OPERATION.

SCHEDULE (ALL OTHERS): MON - FRI 6:00 AM - 6:00 PM, SAT-SUN OFF (ADJUSTABLE)

SERVES: SINGLE ZONE SPACES

CONTROL TYPE: DDC SYSTEM

NOTES: PROVIDES VENTILATION AIR DURING OCCUPIED HOURS. SVAV-1-05: PROVIDES CONSTANT AIRFLOW TO RADIOCHEM LAB 124 24/7, 365 DAYS A YEAR. ALL OTHERS: VAV BOX SHALL BE AT MINIMUM AIRFLOW POSITION IF ASSOCIATED EXHAUST FAN IS OFF. VAV BOX SHALL BE AT MAXIMUM AIRFLOW POSITION IF ASSOCIATED EXHAUST FAN(S) IS ON. SVAV-1-06 WILL REQUIRE (3) DIFFERENT POSITIONS

SINCE THERE ARE (2) EXHAUST FANS SERVING THAT ZONE.

ASSOCIATED EXHAUST FANS:

VAV-1-01: EF-R-18

SVAV-1-05: EF-R-21

SVAV-1-06: EF-R-19, EF-R-20

ARGON GAS MATERIAL SCHEDULE

PIPING AND VALVE MATERIAL SCHEDULE:

LOCATION PIPING SIZE MATERIAL/PART NO. JOINT

ABOVE GROUND

ARGON GAS (350 PSIG) ALL ASTM B 819 COPPER TYPE L 95/5 SWEAT

SHUT-OFF VALVES (600 PSIG) 1/4" TO 1" APOLLO MODEL 77C-101-01A THRU 77C-105-01A FNPT X FNPT

1. THESE PLANS ARE SCHEMATIC AND DO NOT SHOW EXACT ROUTING OR EVERY OFFSET WHICH MAY BE REQUIRED. THE MECHANICAL CONTRACTOR IS TO COORDINATE WITH ALL OTHER TRADES

AND IS TO VERIFY ALL CLEARANCES BEFORE COMMENCING WORK.

2. ALL PIPE SIZES NOTED ON DRAWINGS ARE MINIMUMS.

3. HANGERS AND SUPPORTS FOR PIPING SHALL BE IN ACCORDANCE WITH THE 2018 IMC AND IBC AS AMENDED BY THE STATE OF WASHINGTON AND LOCAL AUTHORITIES.

4. THIS SCOPE ENDS AT THE SUPPLY SHUT-OFF VALVE FOR EQUIPMENT CONNECTION BY OTHERS. ALL FINAL CONNECTIONS AND REQUIRED APPURTANCES ARE BY OWNER.

5. PRESSURE REGULATOR(S) AND PRESSURE GUAGES ARE FURNISHED AND INSTALLED BY OWNER

6. UNLESS OTHERWISE SHOWN, INSTALL ALL VALVES POINTING DOWNWARD.

7. CTS HANGERS SHALL BE ATTACHED TO THE TOP CORDS OF TRUSSES

8. PROVIDE SHUT-OFF VALVES AT ALL EQUIPMENT CONNECTIONS.

9. AT ALL VALVES NOT CONNECTED TO EQUIPMENT, PROVIDE A BRASS PLUG.

10. BASIS OF DESIGN: DESIGN PRESSURE - 350 PSIG; NOMINAL WORKING PRESSURE - 225 PSIG; SAFETY RELIEF 300 PSIG.

11. PROVIDE ANSI STANDARD PIPE MARKERS ("ARGON - 225 PSIG" AFTER PRESSURE REGULATOR) AND VALVE TAGS. REFER TO PLANS FOR VALVE TAG NUMBERS.

E R

ENGINEER:

CHECKED BY:

CAD:

LAST REVISED:

DATE PLOTTED:

ISSUE DATE:

SHEET NUMBER:

E R

DRAWING NUMBER:

T er ra P ow er

E ve re tt

K A\

En gi ne er in g\ D

W G

\S ht s\

.d w g W ed ne sd ay

, A pr il

, 2

DPD STAMP

M ac

D on al d-

M ille r

N S w w w .m ac m ille r.c om

In tl.

B lv d.

S ui te

, S ea

Ta c, W A

Ph on e:

-7

-9

R A

T, W

O R

D D

D-3984-72225020-00

A ZBOROWSKI

G GRAHAM

F MAMERTO

04-11-23

11-04-22

-0

/C D

-1

O R

D S

TM0.02

SEAWAY BLVD

153'-4"

9'-

221'-0"

568'-6"

E R

ENGINEER:

CHECKED BY:

CAD:

LAST REVISED:

DATE PLOTTED:

ISSUE DATE:

SHEET NUMBER:

E R

DRAWING NUMBER:

T er ra P ow er

E ve re tt

K A\

En gi ne er in g\ D

W G

\S ht s\

.d w g W ed ne sd ay

, A pr il

, 2

DPD STAMP

M ac

D on al d-

M ille r

N S w w w .m ac m ille r.c om

In tl.

B lv d.

S ui te

, S ea

Ta c, W A

Ph on e:

-7

-9

R A

T, W

O R

D D

D-3984-72225020-00

A ZBOROWSKI

G GRAHAM

F MAMERTO

04-11-23

11-04-22

-0

/C D

-1

O R

D S

TM0.01S

NTS

K-12793HOLLISTERC_SINKSVITREOUS CHINA

ARGON

FCU-1-07

FCU-1-06

14x14SA 14x14SA UP

UP TO

14x14SA UP

7'-6" 6'-4"

10'-4" 9'-2"

24x24

26x26

10'-4" 9'-2"

14x14SA

UP TO

14x12SA UP 14x12SA

14x12SA UP

14x12SA

7'-6" 6'-4"

24x24

26x26

14x14

10ØRA UP 11'-4"

10'-6"

12x20RA UP

12x20SA UP

11'-10" 10'-2"

20x12RA

20x12SA

11'-6" 10'-6"

20x12SA

20x12RA x1

2R A

12x12RA

24x24

FCU-1-02

UP TO

12ØSA

24x24

ØSA

24x24

10ØSA

8Ø

12ØSA 12ØSA

FCU-1-01

UP TO

24x24

12x10RA x10

10ØSA10

24x24

10ØRA UP

12x10RA UP 12x10SA UP

11'-4" 10'-6"

12'-4" 11'-10"

11'-6" 10'-6"

6Ø

14x14

11'-4" 10'-6"

14x14

24x24

22x12RA

12x12RA

12x12RA 14ØSA UP

14ØRA UP

24x24

FCU-1-05

UP TO

24x24

8Ø

RA 12'-4"

11'-8"

8ØRA

8Ø

24x24

8ØSA

12'-4" 11'-8"

8Ø

8ØSA

6ØSA DN

6ØSA DN 12'-4"

11'-8"

FCU-1-04

UP TO

11'-4" 10'-8"

11'-6" 10'-6"

11'-4" 10'-8"

FCU-1-03

UP TO

8ØRA 8ØRA

12'-8" 12'-0"

10x10

8Ø

16x12RA

12ØRA

24x24

11'-8" 10'-4" 16x12RA UP

16x12SA UP

11'-6" 10'-6" x1

2S A

16x12SA

10ØSA 10ØSA

24x24

8Ø

24x24

TYP(2)

24x24

16x12SA

24x24

12ØSA

24x24

11'-6" 10'-6"

24x24

16x12RA UP 16x12SA UP

16x12RA

TYP(2)

14x14

12ØSA UP

12ØRA UP

EVAV-1-03

16'-6" 15'-4"

24x24

14ØSA UP

24x24

14ØSA UP

24x24

14ØSA UP

128-FH-1

1800 CFM

14ØEA

EVAV-1-06

14ØEA

12x24EA UP 24x12EA

24x12EA

14ØEA

EVAV-1-05

12ØEA UP

500 CFM

100-SN-1

100-FH-3

(FUTURE)

100-SN-2

(FUTURE)

100-SN-3

(FUTURE)

100-SN-4

(FUTURE)

100-SN-5

(FUTURE)

100-SN-6

(FUTURE)

100-SN-7

(FUTURE)

100-SN-8

(FUTURE)

100-SN-9

(FUTURE)

(TYP 2)

24X16B

14X14 EA UP WITH BIRDSCREEN AT

OPENING - 750 CFM

(TIGHT TO STRUCTURE)

11 2

-1

44x30SA UP

52x34W RA ROUTED

BELOW SA.

14'-0" 11'-6"

44x30W SA

MIN R-8 INSULATION REQUIRED

FOR SUPPLY/RETURN DUCT

LOCATED OUTSIDE.

16' AFF

GB-2

GB-3

GB-1

FH-130

FH-131

FH-132

FURNACE

(TYP 6)

16X16A

26ØSA 20ØSA

20ØSA

3'-0"

ØSA

14ØSA

10Ø EA UP

TO EF-R-34

12Ø EA UP TO EF-R-34

6Ø EA UP TO EF-R-34

6ØEA

6Ø EA DOWN

TO GB-3 6Ø EA DOWN

TO GB-2

VAV-1-02

KEYED NOTES

PLACE DAMPER IN DUCTWORK

ABOVE EQUIPMENT.

6Ø EA DUCT FROM GB-2 TO

CONNECT WITH 6Ø EA DUCT

FROM GB-3 AND DUCT TO RISE UP

TO EF-33

OWNER PROVIDED FUME HOOD

TO BE BALANCED TO 800 CFM

EACH.

OWNER PROVIDED GLOVE BOX

TO BE BALANCED TO 200 CFM

EACH.

20ØSA MP UP

TO HVU-1-01

TM6.01 T

TO VAV-1-06

4W R

A 34x52W RA x3

0W S

14ØSA

KEY PLAN

A B

1/8" = 1'-0"

E R

ENGINEER:

CHECKED BY:

CAD:

LAST REVISED:

DATE PLOTTED:

ISSUE DATE:

SHEET NUMBER:

E R

DRAWING NUMBER:

T er ra P ow er

E ve re tt

K A\

En gi ne er in g\ D

W G

\S ht s\

.d w g W ed ne sd ay

, A pr il

, 2

DPD STAMP

M ac

D on al d-

M ille r

N S w w w .m ac m ille r.c om

In tl.

B lv d.

S ui te

, S ea

Ta c, W A

Ph on e:

-7

-9

R A

T, W

O R

D D

D-3984-72225020-00

A ZBOROWSKI

G GRAHAM

F MAMERTO

04-11-23

11-04-22

-0

/C D

-1

O R

D S

1S T

O R

TM2.01A

14x14SA DN

12'-2" 11'-0"

FCU-1-07

FCU-1-06

14x14SA

54x8SA

14x14SA DN 14x14SA

14x12SA DN

14x12SA

54x8SA

14x12SA

54x8SA

12'-0" 11'-0"

14x12SA DN

10ØRA DN

12x20RA DN

12x20SA DN

10ØRA DN

12x10RA DN 12x10SA DN

12ØSA DN

8ØRA

FCU-1-01

0S A

12x10RA x1

0R A

34x10SA 36x14RA 12'-0" 11'-0"

8ØRA

12ØSA

12ØRA

16ØSA

16ØRA

FCU-1-0210

20x12RA

42x14RA40x10SA

8Ø

8ØRA

12'-0"

11'-0" 14ØRA 14

x1 4R

A x1 4S

12ØSA

FCU-2-01

17'-4" 15'-8"

14'-8" 13'-0"

34x10SA

36x14RA

12'-0" 11'-0"

40x16RA UP

TO DOAS

40x16SA UP

TO DOAS

12ØRA DN

10ØRA DN

20'-9" 19'-1"

12ØRA

12ØRA DN

20ØSA

20ØRA

16ØSA

16ØRA

12ØSA DN

12'-0" 11'-0"16 x1 4S

12ØSA

FCU-2-02

14ØRA

4R A 42x14RA

40x10SA

14'-6" 13'-2"

17'-2" 15'-10"

12ØSA

16ØSA

16ØRA

16ØSA

8Ø

14ØRA

4R A

FCU-2-03

42x14RA

40x10SA

12ØSA16

4S A 12'-0"

11'-0"

12ØSA

16x12RA DN 16x12SA DN x1

2R A

42x14RA

40x10RA

12'-0" 11'-0"

14ØRA DN

14ØSA DN

14ØSA

FCU-1-05

FCU-1-03

12'-0" 11'-0"

FCU-2-05

36x14RA 12ØRA

34x10SA

12'-0" 11'-0"

8Ø

16x12RA DN

16x12SA DN

14x14SA

12ØSA

14x12RA 12ØRA FCU-1-04

FCU-2-04

16x12RA

12ØRA DN

12'-0" 11'-0"

12'-1" 11'-1" 40x10SA

42x14RA

40x10SA

42x14RA

42x8RA

42x8SA

10x10

24x24

12ØSA

24x24

12ØRA

24x24

8ØSA

24x24185

24x24

8Ø

24x24200

24x24

8Ø

8ØSA

24x24

8ØSA

24x24

8Ø

24x24

12ØSA

24x24

12ØRA

14ØRA T

24x24

14ØRA

8ØSA

12x24EA DN

18ØEA

HEPA-1-03

72x28EA

x2 4E

12x24EA

19'-6" 17'-6"

SVAV-1-03

24'-1" 22'-7"

14ØSA

14ØSA DN

14ØSA

14ØSA DN

CAP

VAV-1-05

VAV-1-04

VAV-1-03

24ØSA24ØSA

12Ø UP/DN

(FUTURE)

25'-1" 24'-1" 12Ø

(FUTURE)

12Ø

(FUTURE)

18Ø UP

(FUTURE)

14X14 EA UP

(TIGHT TO STRUCTURE)

VAV-1-06

44x30SA DN

46ØSA

34ØSA

18ØEA

6ØEA

6Ø

6ØEA

4'- 0"

10Ø EA DN

TO FH-130

12Ø EA DN TO FURNACE

6Ø EA DN TO GB-1

6Ø EA DOWN TO

GB-2 AND GB-3

10Ø EA DN

TO FH-131

10Ø EA DN

TO FH-132

22Ø EA UP TO EF-R-34

TRANSITION DN TO 18Ø EA

20Ø MP DN TO VAV-1-02

36X12B

CAP

KEY PLAN

A B

1/8" = 1'-0"

E R

ENGINEER:

CHECKED BY:

CAD:

LAST REVISED:

DATE PLOTTED:

ISSUE DATE:

SHEET NUMBER:

E R

DRAWING NUMBER:

T er ra P ow er

E ve re tt

K A\

En gi ne er in g\ D

W G

\S ht s\

.d w g W ed ne sd ay

, A pr il

, 2

DPD STAMP

M ac

D on al d-

M ille r

N S w w w .m ac m ille r.c om

In tl.

B lv d.

S ui te

, S ea

Ta c, W A

Ph on e:

-7

-9

R A

T, W

O R

D D

D-3984-72225020-00

A ZBOROWSKI

G GRAHAM

F MAMERTO

04-11-23

11-04-22

-0

/C D

-1

O R

D S

2N D

O R

TM2.02A

48"x48" ROOF

ACCESS HATCH

CU-R-11

CU-R-12

ERV-R-1

40x16RA DN 40x16SA DN

40x16 RA INLET

MANUFACTURER PROVIDED 40x16

EXHAUST COWLING, PROVIDE BIRD

SCREENING AT OUTLET.

MANUFACTURER PROVIDED 50x20

INTAKE COWLING WITH DOWNTURN.

PROVIDE BIRD SCREENING AT OUTLET.

CU-R-01

CU-R-02

CU-R-05 CU-R-06 CU-R-07 CU-R-03

CU-R-10

CU-R-09

CU-R-04

CU-R-08

EF-R-28

12Ø DN

(FUTURE)

RV-R-3

(FUTURE)

RV-R-2RV-R-1

EF-R-14

18Ø DN

(FUTURE)

EF-R-11

18Ø DN

(FUTURE)

EF-R-15

18Ø DN

(FUTURE)

EF-R-31MIN 10'

14X14EA DN

10' FROM OPERABLE OPENING INTO THE BUILDING

6FT FROM EXTERIOR WALLS

EF-R-34

10' HIGH DISCHARGE STACK 16Ø

EA DUCT.

NEW EXHAUST FAN TO BE INSTALLED PER MANUFACTURER

RECOMMENDATIONS. COORDINATE EXACT LOCATION FOR

VARIABLE FREQUENCY DRIVE WITH GC AND EC.

22ØEA

TRANSITION TO 16Ø INLET

NEW FAN TO BE MOUNTED ON

SLEEPERS PROVIDED BY GC. ROOFING

BY OTHERS.

TM6.01

15'-0"

31'-7"

KEY PLAN

A B

1/8" = 1'-0"

E R

ENGINEER:

CHECKED BY:

CAD:

LAST REVISED:

DATE PLOTTED:

ISSUE DATE:

SHEET NUMBER:

E R

DRAWING NUMBER:

T er ra P ow er

E ve re tt

K A\

En gi ne er in g\ D

W G

\S ht s\

.d w g W ed ne sd ay

, A pr il

, 2

DPD STAMP

M ac

D on al d-

M ille r

N S w w w .m ac m ille r.c om

In tl.

B lv d.

S ui te

, S ea

Ta c, W A

Ph on e:

-7

-9

R A

T, W

O R

D D

D-3984-72225020-00

A ZBOROWSKI

G GRAHAM

F MAMERTO

04-11-23

11-04-22

-0

/C D

-1

O R

D S

R O

O F

TM2.03A

EF-R-29

'-0

12" DISCHARGE STACK

W/ 8" NOZZLE

EF-R-29

12" DISCHARGE STACK

W/ 8" NOZZLE

'-0

60'-0"

6'-

0" PROPERTY LINE

LINE OF SIGHT

16Ø EXHAUST WITH FIELD FABRICATED DUCT

STACK RISING TO 10', MAINTAIN 16Ø DUCT TO

OBTAIN 3000 FPM DISCHARGE.

106'-0"

6'-

0" PROPERTY LINE

LINE OF SIGHT

'-0

22'

16Ø EXHAUST WITH FIELD FABRICATED DUCT

STACK RISING TO 10', MAINTAIN 16Ø DUCT TO

OBTAIN 3000 FPM DISCHARGE.

31'-7"

E R

ENGINEER:

CHECKED BY:

CAD:

LAST REVISED:

DATE PLOTTED:

ISSUE DATE:

SHEET NUMBER:

E R

DRAWING NUMBER:

T er ra P ow er

E ve re tt

K A\

En gi ne er in g\ D

W G

\S ht s\

.d w g W ed ne sd ay

, A pr il

, 2

DPD STAMP

M ac

D on al d-

M ille r

N S w w w .m ac m ille r.c om

In tl.

B lv d.

S ui te

, S ea

Ta c, W A

Ph on e:

-7

-9

R A

T, W

O R

D D

D-3984-72225020-00

A ZBOROWSKI

G GRAHAM

F MAMERTO

04-11-23

11-04-22

-0

/C D

-1

O R

D S

N S

TM3.01

TM6.01 FUME HOOD EXHAUST FAN DETAIL

N.T.S.

MAINTAIN 16Ø DUCT TO OBTAIN

3000 FPM DISCHARGE.

COORDINATE DUCT RISER

SUPPORTS W/G.C.

FLANGED CONNECTION W/EPDM

GASKET.

STEEL FAN BASE

SEISMIC VIBRATION ISOLATORS:

AS REQUIRED

SLEEPERS OR PAD

PROVIDED BY G.C

NOTE: COORDINATE EQUIPMENT SUPPORT LOCATION WITH STRUCTURAL ENG & G.C

MINIMUM 10'

ABOVE THE

ADJACENT

ROOF/PARAPET

TM6.01 VAV BOX DETAIL

N.T.S.

DUCT

DUCT HANGER

(TYP)

THREE DUCT DIAMETERS

MINIMUM STRAIGHT DUCT

VAV BOX

TRANSITION IF REQUIRED

SAME SIZE AS INLET SHEET METAL DUCT W/

1" ACOUSTICAL LINING

SUPPLY AIR DUCT

3'-0" MIN TO

FIRST OUTLET

TM6.01

ROOFTOP EQUIPMENT

SLEEPER SUPPORT DETAIL

N.T.S.

ROOF

22 GAUGE GALV SLEEPER

CAP BY M.C.

ANCHOR TO STRUCTURE

ROOFING EXTENDED UP (4)

SIDES OF SLEEPER

BY G.C.

CANT STRIP

AND ROOFING

BY G.C.

EQUIPMENT SLEEPER,

BY G.C. LOCATION

LAYOUT BY M.C.

DRIP EDGE

TM6.01 STACK GUY-WIRE DETAIL

N.T.S.

PLAN VIEW

NOTE:

ANCHOR GUY LINES PER

STRUCTURAL REQUIREMENTS.

ELEVATION

ROOF

GUY WIRES SPACED 120'

STACK

CABLE CLAMP

STACK

SSTL CABLES QTY & SIZE

AS REQUIRED

INTERMEDIATE BRACING AS

REQUIRED.

TERMINATE PER PLANS

EQUAL

'-0

E R

ENGINEER:

CHECKED BY:

CAD:

LAST REVISED:

DATE PLOTTED:

ISSUE DATE:

SHEET NUMBER:

E R

DRAWING NUMBER:

T er ra P ow er

E ve re tt

K A\

En gi ne er in g\ D

W G

\S ht s\

.d w g W ed ne sd ay

, A pr il

, 2

DPD STAMP

M ac

D on al d-

M ille r

N S w w w .m ac m ille r.c om

In tl.

B lv d.

S ui te

, S ea

Ta c, W A

Ph on e:

-7

-9

R A

T, W

O R

D D

D-3984-72225020-00

A ZBOROWSKI

G GRAHAM

F MAMERTO

04-11-23

11-04-22

-0

/C D

-1

O R

D S

TM6.01

ARGON

3/4"NG TO WH-1-01

1/2"NG-22' AFF

2"NG TO METER

GAS METER

ASSEMBLY 2"NG-22' AFF 2"NG-22' AFF

DROP DOWN COLUMN WITH 1/2".

PROVIDE TEE AND (2) 1/2" S.O.V.S.

3/4" @ CLG.

1/2"1/2"

3/4" @ CLG. WITH CTS

HANGERS

3/4" @ CLG. SUPPORT

FROM WALL

DROP DOWN WALL WITH 1/2".

PROVIDE 1/2" S.O.V. 1" @ CLG. SUPPORT

FROM WALL

1/2" S.O.V.

AT 3'-0" AFF

DROP DOWN WALL WITH 3/4".

PROVIDE 1/4" & 3/4" S.O.V.

1" @ CLG.

P.R.V SET FOR 225 PSIG OUTLET PRESSURE AND

RATED FOR 60 SCFM. PVR IS OF/OI

1" IET/EVL CONNECTION VALVE (LOCKABLE)

AT 3'-0" AFF

1" S.O.V.

1/2"

3/4" 3/4"1/4"

RISE TO CEILING HEIGHT AND

SUPPORT FROM WALL.

PENETRATE EXTERIOR

WALL AND SEAL.

START CTS

HANGERS

1" @ CLG. SUPPORT

FROM WALL

PROVIDE CTS HANGERS AND

INSTALL ABOVE OVERHEAD

DOOR SUPPORTS

EVL-AR-100S-103

EVL-AR-100S-1041/4"

3/4" EVL-AR-100S-105

EVL-AR-100N-101 EVL-AR-100N-100

EVL-AR-100N-102

GRADE

SLOPE

EL. 14'-4" ABOVE

GRADE AT

BUILDING LINE

1" ARGON - SUPPORT OFF

CROSS ARMS FURNISHED

& INSTALLED BY OTHERS.

P P

ARGON DEWAR

PRESSURE SAFETY

RELIEF BY OWNER

UPSTREAM OF SHUT-OFF VALVE

EVL-AR-OUT-103

PRESSURE GAUGES

(OF/OI)

EVL-AR-OUT-101

PRESSURE GAUGES

(OF/OI)

POC WITH SHUT-OFF

DOWNSTREAM OF DEWAR

SAFETY RELIEF

EVL-AR-OUT-102

EL. 14-7" ABOVE

GRADE AT ARGON TANK

ARGON DEWAR

OF/OI (350 PSIG).

300 PSIG

PRESSURE SAFETY

RELIEF BY MMFS

EVL-AR-OUT-100

EVL-AR-100N-103

EVL-AR-100S-102 EVL-AR-100S-101

EVL-AR-100S-100

1" @ CLG.

1 1/4"CD UP

1 1/4"CD TERMINATING WITH 1"

AIRGAP ABOVE JANITORS SINK

1 1/4"CD UP

1 1/4"CD TERMINATING WITH 1"

AIRGAP AT TAIL PIECE OF SINK

DEMO 1/2" ARGON

VALVE AND

REPLACE WITH

NEW 3/4" VALVE.

3/4" ARGON

KEYED NOTES

1/2" ARGON CONNECTION DROP DOWN

TO OWNER-PROVIDED EQUIPMENT

WITH SHUT-OFF VALVE.

1 1/2"NG-8' AFF

1 1/2"NG TO HVU-1-01

KEYED NOTES

PROVIDE GAS PRESSURE REGULATOR,

SHUT-OFF VALVE AND UNION TO MATCH

PIPING CONNECTION TO HVU-1-02.

PROVIDE 1-1/4"Ø SOLID WALL PVC 6" HIGH

TRAP WITH UNION AT EQUIPMENT

CONNECTION. MATCH ROUTING TO HVU-1-02.

1 2

EARTHQUAKE VALVE

KEY PLAN

A B

E R

ENGINEER:

CHECKED BY:

CAD:

LAST REVISED:

DATE PLOTTED:

ISSUE DATE:

SHEET NUMBER:

E R

DRAWING NUMBER:

T er ra P ow er

E ve re tt

K A\

En gi ne er in g\ D

W G

\S ht s\

.d w g W ed ne sd ay

, A pr il

, 2

DPD STAMP

M ac

D on al d-

M ille r

N S w w w .m ac m ille r.c om

In tl.

B lv d.

S ui te

, S ea

Ta c, W A

Ph on e:

-7

-9

R A

T, W

O R

D D

D-3984-72225020-00

A ZBOROWSKI

G GRAHAM

F MAMERTO

04-11-23

11-04-22

-0

/C D

-1

O R

D S

1S T

O R

TF2.01A

1/8" = 1'-0"

SITE

3315 SEAWAY BLVD

EVERETT, WA 98203

I-5

HWY 2

POSESSION

SOUND

US NAVAL

STATION

EVERETT

VICINITY MAP

NO SCALE

1. THESE PLANS ARE SCHEMATIC AND DO NOT SHOW EXACT ROUTING OR EVERY OFFSET WHICH MAY BE REQUIRED. THE LAB GAS PIPING CONTRACTOR IS TO COORDINATE WITH ALL OTHER TRADES AND IS TO

VERIFY ALL CLEARANCES BEFORE COMMENCING WORK.

2. RECEIVING, SETTING AND SEISMIC REQUIREMENTS FOR OWNER FURNISHED EQUIPMENT IS BY OTHERS.

3. ALL PIPE SIZES NOTED ON DRAWINGS ARE MINIMUMS.

4. HANGERS AND SUPPORTS FOR PIPING SHALL BE IN ACCORDANCE WITH SECTION 313 AND TABLE 313.3 OF THE 2015 UNIFORM PLUMBING CODE WITH WASHINGTON STATE AMENDMENTS.

5. THIS SCOPE ENDS AT THE SUPPLY SHUT-OFF VALVE FOR EQUIPMENT CONNECTION BY OTHERS. ALL FINAL CONNECTIONS AND REQUIRED APPURTANCES ARE BY OWNER.

6. PRESSURE REGULATOR(S) AND PRESSURE GUAGES ARE FURNISHED AND INSTALLED BY OWNER.

7. UNLESS OTHERWISE SHOWN, INSTALL ALL VALVES POINTING DOWNWARD.

8. CTS HANGERS SHALL BE ATTACHED TO THE TOP CORDS OF TRUSSES

9. AT ALL VALVES NOT CONNECTED TO EQUIPMENT, PROVIDE A BRASS PLUG.

10. BASIS OF DESIGN: DESIGN PRESSURE - 350 PSIG; NOMINAL WORKING PRESSURE - 225 PSIG; SAFETY RELIEF 300 PSIG.

11. REFER TO "LAB GAS SYSTEM TESTING SCHEDULE" FOR SYSTEM COMMISSIONING REQUIREMENTS.

12. PROVIDE ANSI STANDARD PIPE MARKERS ("ARGON - 225 PSIG" AFTER PRESSURE REGULATOR) AND VALVE TAGS. REFER TO PLANS FOR VALVE TAG NUMBERS.

LAB GAS GENERAL NOTES

PIPING AND VALVE MATERIAL SCHEDULE:

LOCATION PIPING SIZE MATERIAL/PART NO. JOINT

ABOVE GROUND

ARGON (350 PSIG) 1/2" TO 1" TYPE L COPPER 95/5 SWEAT

PRESSURE RELIEF VALVE (300 PSIG) 1" APOLLO MODEL 19M-E-E-K-300-Q MNPT X FNPT

SHUT-OFF VALVES (600 PSIG) 1/4" TO 1" APOLLO MODEL 77C-101-01A THRU 77C-105-01A FNPT X FNPT

DRAWING SHEET INDEX

NAME TITLE NAME TITLE

TG0.01 SCHEDULES TG2.01B FIRST FLOOR NORTH PLAN - ARGON PIPING

TG2.01A FIRST FLOOR SOUTH PLAN - ARGON PIPING

LAB GAS SCOPE OF WORK

INSTALL NEW 225 PSIG ARGON LAB GAS SYSTEM FROM OWNER'S DEWAR TO EQUIPMENT SHUT-OFF VALVES. PROVIDE SYSTEM PRESSURE TEST AND COMMISIONING.

CONTACT LIST

TITLE NAME COMPANY PHONE NUMBER EMAIL

DESIGN ENGINEER MICHAEL CURTRIGHT MACDONALD MILLER 206-768-4146 MICHAEL.CURTRIGHT@MACMILLER.COM ACCOUNT MANAGER KEVIN ANWAY MACDONALD MILLER 206-768-4102 KEVIN.ANWAY@MACMILLER.COM PLUMBING SUPERINTENDENT KELLY KING MACDONALD MILLER 206-768-3962 KELLY.KING@MACMILLER.COM PLUMBING FOREMAN PAUL MONSEN MACDONALD MILLER 206-768-3848 PAUL.MONSEN@MACMILLER.COM

LEGAL DESCRIPTION

APN# 28040300400300

LEGAL DESCRIPTION:

SEC 03 TWP 28 RGE 04LOT 1 OF SEAWAY CENTER TWO/INTERMIC BSP REC VOL 1 PGS 181 THRU 183 AF 8910255009 & BEING PTN SE1/4

LAB GAS SYSTEM TESTING SCHEDULE PRESSURE (PSIG) PROTOCOL

SYSTEM OPERATING TEST MEDIUM DURATION

ARGON 225 L2 L1 16 HOURS

NOTES

L1 CLEAN "INDUSTRIAL GRADE" NITROGEN

L2 TEST PRESSURE: 350 PSIG. USE CALIBRATED GAUGE SIZED FOR 0 - 600 PSIG RANGE. MAXIMUM TEST PRESSURE DROP: 1 PSIG.

REFER TO DRAWING TG0.01 FOR PIPE MATERIAL, JOINT TYPE, VALVES AND OTHER SYSTEM REQUIREMENTS.

TG0.01

E R

ENGINEER:

CHECKED BY:

CAD:

LAST REVISED:

DATE PLOTTED:

ISSUE DATE:

SHEET NUMBER:

E R

DRAWING NUMBER:

D et ro it

Av en ue S

Se at tle , W

Ph on e:

-7

-9

Fa x:

-7

-6 w w w

.m ac m ille r.c om

W A

Li c

N o:

D O

0R U

M ac

D on al d-

M ille r

N S

T er ra P ow er

E ve re tt

K A\

En gi ne er in g\ D

W G

\S ht s\

.d w g Tu es da y, A pr il

, 2

P M

DPD STAMP

O W

III

R R

T, W

O R

D D

D-3984-72192229-04

M CURTRIGHT

B GEZON

F MAMERTO

01-14-22

07-20-20

-1

-0

O W

O M

-2

R O

-1

ARGON

DROP DOWN COLUMN WITH 1/2".

PROVIDE TEE AND (2) 1/2" S.O.V.S.

3/4" @ CLG.

1/2"1/2"

3/4" @ CLG. WITH CTS

HANGERS

3/4" @ CLG. SUPPORT

FROM WALL

DROP DOWN WALL WITH 1/2".

PROVIDE 1/2" S.O.V. 1" @ CLG. SUPPORT

FROM WALL

1/2" S.O.V.

AT 3'-0" AFF

DROP DOWN WALL WITH 3/4".

PROVIDE 1/4" & 3/4" S.O.V.

1" @ CLG.

P.R.V SET FOR 225 PSIG OUTLET PRESSURE AND

RATED FOR 60 SCFM. PVR IS OF/OI

1" IET/EVL CONNECTION VALVE (LOCKABLE)

AT 3'-0" AFF

1" S.O.V.

1/2"

3/4" 3/4"1/4"

RISE TO CEILING HEIGHT AND

SUPPORT FROM WALL.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Aug 26, 2025.