3. HIDH3026 - Storage Shed - Scope Only.pdf
PDF 89 KB Posted
- Attached to
- CDOT Yuma and Wray Building Repairs
- Solicitation number
- 2025-01
- Issued by
- Yuma County, Colorado
About this file
This document is a detailed scope of work for a storage shed repair project for the Colorado Department of Transportation (CDOT), specifically for a location in Wray, Colorado. The scope of work includes comprehensive repair and replacement (R&R) of various structural components for a storage shed, encompassing roof and exterior wall repairs. The project involves replacing metal roofing (26 gauge, ribbed) covering approximately 141 square feet, removing additional layer of composition shingles, replacing drip edge (24.50 linear feet), gable trim, ridge cap, and closure strips. Exterior wall work includes replacing wall panels on multiple elevations (left/south, rear/west, and right/north), with a total of approximately 267 square feet of ribbed metal wall panels and associated metal J trim and outside corner treatments.
The document provides a detailed breakdown of labor and material requirements, with itemized quantities for each specific repair task. The project includes 8 hours of commercial supervision and project management, and provision for a tandem axle dump trailer with associated dump fees. While pricing details are not explicitly shown, the comprehensive scope suggests a structured approach to rehabilitating the storage shed's critical structural elements. The document appears to be part of a larger set of repair projects for CDOT facilities in Yuma and Wray, Colorado, indicating a systematic approach to maintaining state infrastructure assets.
View the file
Other files
Show all 24
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SOC_5-21_CDOT_WRAY_3
HIDH3026 - Storage Shed
General
DESCRIPTION QNTY UNIT
1. Commercial Supervision / Project Management - per hour 8.00 HR
2. Tandem axle dump trailer - per load - including dump fees 1.00 EA
Roof
DESCRIPTION QNTY UNIT
3. R&R Metal roofing - ribbed - 26 gauge - up to 1" 141.00 SF
4. Additional layer of comp. shingles, remove (no haul off) 1.41 SQ
5. R&R Drip edge 24.50 LF
6. R&R Gable trim for metal roofing - 26 gauge 23.00 LF
7. R&R Ridge cap - metal roofing 12.25 LF
8. R&R Closure strips for metal roofing - inside and/or outside 49.00 LF
Exterior
Left Elevation (South)
DESCRIPTION QNTY UNIT
9. R&R Wall panel - ribbed - 26 gauge - up to 1" 92.00 SF
10. R&R Metal J trim - metal building 24.50 LF
11. R&R Outside corner - 26 gauge 15.00 LF
Rear Elevation (West)
DESCRIPTION QNTY UNIT
12. R&R Wall panel - ribbed - 26 gauge - up to 1" 83.00 SF
13. R&R Metal J trim - metal building 22.00 LF
Right Elevation (North)
DESCRIPTION QNTY UNIT
SOC_5-21_CDOT_WRAY_3 Page: 2
CONTINUED - Right Elevation (North)
DESCRIPTION QNTY UNIT
14. R&R Wall panel - ribbed - 26 gauge - up to 1" 92.00 SF
15. R&R Metal J trim - metal building 24.50 LF
16. R&R Outside corner - 26 gauge 15.00 LF
| Line Item Detail |
| Line Item Detail |
File details come from the government source that posted it. Updated .