3-03 - Attachment B (Style 1 Swinging Gate).pdf

This is a technical specification drawing for a Style 1 swinging gate component related to ITB 2026-004 Golf Course Fence Replacement in Texas. The drawing, designated as Attachment B, provides detailed specifications for a Centurion 2 Gate with Spartan 3-Rail configuration designed for the golf course fence replacement project. The gate specifications include dimensions ranging from 10 to 16 feet in width and 4 to 8 feet in height, with picket spacing of 3-15/16 inches typical. The gate construction utilizes 1-1/2" x 14 gauge rails and 3/4" x 16 gauge pickets, with the amount of pickets varying based on construction requirements. The drawing indicates that the gate height increases result in corresponding increases in picket placement: 46 inches for 4-foot tall gates, 58 inches for 5-foot tall gates, 70 inches for 6-foot tall gates, 82 inches for 7-foot tall gates, and 94 inches for 8-foot tall gates.

The specification drawing was prepared by Robert Curry and approved by project management, with the drawing marked as "NTS" (not to scale) for reference purposes. This gate style represents one component of the larger golf course fence replacement project, which includes the installation of approximately 5,280 linear feet of 6-foot-tall wrought iron fence and the removal and haul-off of existing post and rail fencing. The technical specifications provided in this attachment establish the standard dimensions and material requirements that bidders must use when preparing proposals for the fence replacement work.