27Q2002 62754491 Exhibits.pdf
PDF 99 KB Posted
- Attached to
- HARDWARE (HEX HEAD CAPSCREWS & BOLTS)
- Solicitation number
- SPMYM327Q2002
About this file
This is a Contract Data Requirements List (CDRL) for procurement contract 62754491 involving hex head cap screws. The document specifies two mandatory data items that the contractor must submit with the material delivery.
Data Item A001 requires submission of a Certificate of Compliance documenting certification of quality compliance, based on authority DI-MISC-81356A, with reference to contract Section C.2. Data Item A002 requires submission of Certification Data/Report containing chemical and mechanical certification per authority DI-MISC-82386, with reference to contract Section C.3. Both data items must be submitted one time with the material and are subject to distribution statement A (unlimited distribution). Each data item requires one final copy to be submitted under separate shipment numbers for payment processing per FAR clauses 252.232-7006, 252.232-7003, or 52.232-36. The A002 certification must contain actual quantitative test results in specification-required units for all chemical and mechanical tests, with evidence of proper specimen testing. New untested fasteners are required for wedge tensile and yield strength testing. The contract references marking and certification requirements for controlled industrial material. The CDRL was prepared by Conrad Gagne on 08/05/2026 and approved by Edward Walsh on 10/16/2026, with requiring office CODE 245.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 27Q2002 62754051-3 Exhibits.pdf | ||
| SPMYM327Q2002 Combined Synopsis Solicitation.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses 8-28-2026.docx | DOCX document | |
| SPMYM327Q2002 RFQ.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-1283-26 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
HEX HEAD CAP SCREW
E. CONTRACT/PR NO.
62754491
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-82386
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 6 AND 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-82386, the requirements of the contract section titled, Marking and Certification
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY
CONRAD GAGNE Ext: 6797 245.2C
H. DATE
08/05/2026
I. APPROVED BY 245.2
R e c o v e r a b l e S i g n a t u r e
X E D W A R D W A L S H
S i g n e d b y : d 2 9 9 6 f a c - 5 2 c 0 - 4 6 b 8 - 8 d 1 d - c b 9 9 6 9 5 2 1 4 8 b
J. DATE
10/16/2026
File details come from the government source that posted it. Updated .