27Q2002 62754051-3 Exhibits.pdf
PDF 102 KB Posted
- Attached to
- HARDWARE (HEX HEAD CAPSCREWS & BOLTS)
- Solicitation number
- SPMYM327Q2002
About this file
This is a Contract Data Requirements List (CDRL) for the procurement of hex head capscrews under contract number 6275405 with requiring office code 245.
The CDRL specifies two required data items to be submitted by the contractor. Data Item A001 requires a Certificate of Compliance certifying quality compliance, authorized under DI-MISC-81356A and referenced in contract section C.2. Data Item A002 requires Certification Data/Report containing chemical and mechanical certification, authorized under DI-MISC-82386 and referenced in contract section C.3. Both data items must be submitted one time with the material delivery under separate shipment numbers. Each submission requires one final copy to be distributed to addressee 133.2. The certification data must contain actual test results for all chemical and mechanical tests required by specification, with results presented in quantitative form using specification-required units. For fastener certification, evidence of testing the correct number of specimens is mandatory, with new untested fasteners required for wedge tensile testing and yield strength testing. Paragraphs 6 and 8 of DI-MISC-82386 do not apply, and marking and certification requirements for controlled industrial material also apply. Payment and submission procedures are governed by clauses 252.232-7006, 252.232-7003, or 52.232-36. The CDRL was prepared by Michael O'Brien on 08/14/2026 and approved by Jason Laflamme on 09/26/2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM327Q2002 Combined Synopsis Solicitation.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses 8-28-2026.docx | DOCX document | |
| 27Q2002 62754491 Exhibits.pdf | ||
| SPMYM327Q2002 RFQ.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C3-1357-26 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
HEX HEAD CAPSCREWS
E. CONTRACT/PR NO.
6275405
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-82386
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY
MICHAEL OBRIEN Ext: 0546 245.2O
H. DATE
08/14/2026
I. APPROVED BY 245.
R e c o v e r a b l e S i g n a t u r e
X J a s o n L a f l a m m e
S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d
J. DATE
09/26/26
File details come from the government source that posted it. Updated .