26Q7901_Salients.pdf
PDF 136 KB Posted
- Attached to
- CNC HORIZONTAL MACHINING CENTER (SOLE SOURCE)
- Solicitation number
- SPMYM226Q7901
About this file
This document is a technical specification sheet for a CNC Horizontal Machining Center detailing salient characteristics and system capabilities.
The machine features a maximum footprint of 178" x 169" x 133" and weighs up to 30,000 pounds, with a 64" x 36" table capable of supporting 10,000-pound loads. The equipment provides 64 inches of X-axis travel, 50 inches of Y-axis travel, and 32 inches of Z-axis travel. The spindle system delivers 30.0 horsepower with maximum speeds of 7,500 rpm, maximum torque of 340.0 ft-lbf at 700 rpm, and CT50 spindle taper with grease-packed, air-cooled bearings. Cutting speed reaches 500 inches per minute with rapids of 600 inches per minute on all three axes. The machine includes a fully integrated 4th-axis platter (4AX-E16) with 30-inch diameter, 360-degree travel capability, 50-inch maximum part swing, and 2,000 ft-lbf continuous rotational torque. The tool changer is SMTC type with 50+1 capacity, accommodating tools up to 4.0 inches in diameter (10.0 inches with adjacent empty slot) and 20 inches in length, with tool-to-tool changeover in 8 seconds.
The system operates on 440 VAC three-phase power at 35 amps and requires 9 scfm of compressed air at 100 psi minimum. The 95-gallon coolant capacity supports through-spindle coolant delivery at 300 psi with automatic chip conveying and auxiliary filtration. Control features include 1 GB program memory, graphic dry run capability, rigid tapping, user-definable macros, and wireless intuitive probing system (WIPS). The machine requires NRTL certification and must include IUID tag per MIL-STD-130 and service mode access option (93-2905). Training support includes five-day application engineer blocks of 8 hours per day.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CNC Horizontal Machining Center Salient Characteristics
• Maximum Footprint (WxDxH): 178" x 169" x 133"
• Max Machine Weight: 30,000 lb
• Table Size (LxW): 64" x 36"
• Max Table Load: 10,000 lb
• Number of Standard T-Slots: 7
• T-Slot Width: 0.626-0.630 in
• T-Slot Center Distance: 4.92 in
• X Axis Travel: 64.00 in
• Y Axis Travel: 50.00 in
• Z Axis Travel: 32.00 in
• Spindle Max Rating: 30.0 hp
• Spindle Max Speed: 7500 rpm
• Spindle Max Torque: 340.0 ft-lbf @ 700 rpm
• Spindle Drive System: 2-Speed Gearbox
• Spindle Taper: CT50
• Spindle Bearing Lubrication: Grease Packed
• Spindle Cooling: Air Cooled
• Max Cutting Speed: 500 ipm
• Rapids on X, Y, and Z Travel: 600 ipm
• Max Thrust X Axis Motor: 4000 lbf
• Max Thrust Y Axis Motor: 8000 lbf
• Max Thrust Z Axis Motor: 8000 lbf
• 4AX-E16 - Full 4th-axis platter integrated into the table
• Integrated 4th Axis Platter Diameter: 30.00 in
• Integrated 4th Axis Platter Travel: 360°
• Integrated 4th Axis Platter Max Part Swing: 50.0 in
• Integrated 4th Axis Platter Max Weight on Platter: 10,000 lbs
• Integrated 4th Axis Platter Max Rating: 5 hp
• Integrated 4th Axis Platter Rotational Torque (continuous): 2000 ft-lbf
• Integrated 4th Axis Platter Backlash: 30 arc-sec
• Integrated 4th Axis Platter Gear Ratio: 500:1
• Integrated 4th Axis Platter Brake Torque: 4000 ft-lbf
• Integrated 4th Axis Platter Min Resolution: 0.001°
• Integrated 4th Axis Platter Indexing Accuracy: ± 30 arc-sec
• Integrated 4th Axis Platter Repeatability: 15 arc-sec
• Integrated 4th Axis Platter Rapids on A: 36°/sec
• Integrated 4th Axis Platter Max Cutting A: 36°/sec
• Integrated 4th Axis Platter Max Spindle Centerline to Table: 5.75 in
• Tool Changer Type: SMTC
• Tool Changer Capacity: 50+1
• Max Tool Diameter: (full): 4.0 in
• Max Tool Diameter, Large (adjacent empty): 10.0 in
• Max Tool Length (from gage line): 20.00 in
• Max Tool Weight: 30.0 lbs
• Tool Change, Tool-to-Tool (avg): 8.00 s
• Tool Change, Chip-to-Chip (avg): 12.60 s
• Air Required: 9 scfm @ 100 psi
• Inline Air Hose: 3/8 in
• Coupler size (Air): 3/8 in
• Air Pressure Min: 80 psi
• Input AC Voltage (3 Phase) - High: 440 VAC
• Full Load Amps (3 Phase) - High: 35 A
• Coolant Capacity: 95 gal
• Automatic Chip Auger
• Enclosure Exhaust System
• CNC Control Cabinet Cooler
• Control Touch Screen
• Early Power Failure Detection Module
• Ethernet Interface
• Large Remote Control Jog Handle, Touch Screen
• Rigid Tapping
• 1 GB program memory
• Second Home Position
• Power Surge Protection
• Memory Lock Keyswitch
• USB port
• Graphic Dry Run
• Self-Diagnostics
• Tool Life Management
• Background Editing
• HD HV-ISO-XFRMR - Heavy-Duty Internal High-Voltage Isolated Power Transformer
• WIPS-R-EC - Wireless Intuitive Probing System (WIPS)
• In-Tank Chip Conveyer
• Through Spindle Coolant, 300 psi (21 bar)
• Through-Tool Air Blast
• Auxiliary Coolant Filter
• Automatic Coolant Refill
• Coolant Sanitizer
• High-Speed Machining
• Visual Parts Programming
• DWO/TCPC - G254 Dynamic work offset (DWO) and G234 Tool Center Point Control (TCPC)
• Spindle Orientation
• User-Definable Macros
• Coordinate Rotation and Scaling
• APP5 – Training with an Application Engineer offered in five day (5-Day) blocks of 8 hours per day
• 93-2905 -- Option to allow the machine to be placed in service mode, which will allow access to the Factory, I/O Config
• IUID Tag per MIL-STD-130
• NRTL Certification (see paragraph 2.2.1)
File details come from the government source that posted it. Updated .