2601_OC_Facilities_Warehouse_Elec_FOR_BID_(26.09.03).pdf

PDF 3 MB Posted Oct 2, 2026

Attached to: Facilities & Parks New Supply Warehouse Building
Solicitation number: ITB FM 04-27
Issued by: Okaloosa County, Florida

About this file

Written by GovTribe AI · Oct 7, 2026

This is an electrical engineering drawing set for a metal warehouse facility expansion project in Okaloosa County, Florida. The project, titled "Facilities & Parks New Supply Warehouse Building," is located at 5489 Old Bethel Road in Crestview, Florida, and is being undertaken by the Board of County Commissioners of Okaloosa County to expand the department's supply warehouse. The electrical scope of work encompasses comprehensive power distribution, lighting control systems, HVAC equipment connections, grounding systems, and auxiliary systems throughout the new facility. The design includes a main distribution panel (MDP) with 600-amp capacity, sub-panels (Panel A at 175 amps and Panel SH at 300 amps), lighting controls utilizing a Wattstopper DLM network system with occupancy sensors and vacancy sensors, emergency and exit lighting, receptacle circuits throughout multiple room types, and a pad-mounted transformer connection coordinated with the utility company. The electrical contractor is responsible for coordinating with mechanical and plumbing trades, obtaining local permits, field-verifying existing conditions, and completing a comprehensive one-year warranty period from final acceptance.

The drawings specify detailed installation requirements including conductor sizing standards (copper #12 and #10 solid for circuits under 100 amps, stranded for #8 and larger), conduit types and routing (Schedule 40 PVC for underground to first box, IMC for exposed exterior work, EMT for concealed branch circuits), grounding system design with dedicated grounding bars and bonding requirements per National Electrical Code standards, and specialized equipment labeling and fault current marking requirements. The electrical contractor must coordinate service connection work and potential utility impact fees with the serving electric utility company and confirm cost responsibility with the project owner. All work must comply with the State Building Code and National Electrical Code, with architect approval required for all lighting fixtures, switches, receptacles, and panelboards prior to purchasing. The project drawings are dated September 15, 2026, and designed by HG Engineers, a professional engineering firm licensed in Florida.

View the file

Other files

File	Type	Posted
Facilities_&_Parks_New_Supply_Warehouse_Building.pdf	PDF	Oct 6, 2026
2601_OC_Facilities_Warehouse_Civil_FOR_BID_(26.09.15).pdf	PDF	Oct 2, 2026
DraftAgreement.04-27.docx	DOCX document	Oct 2, 2026
2601_OC_Facilities_Warehouse_Arch_FOR_BID_(26.09.15).pdf	PDF	Oct 2, 2026
2601_OC_Facilities_Warehouse_Syst_FOR_BID_(26.09.15).pdf	PDF	Oct 2, 2026
2601_OC_Facilities_Warehouse_MP_FOR_BID_(26.09.15).pdf	PDF	Oct 2, 2026
2601_OC_Facilities_Warehouse_Struc_FOR_BID_(26.09.15).pdf	PDF	Oct 2, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

- LIGHTSLTS

- HEAT PUMP

- GAS WATER HEATER

- UNLESS NOTED OTHERWISE

- WEATHERPROOF

- CONDENSING UNIT

- AIR HANDLING UNIT

- RECEPTACLE

GWH

COND

AHU

UNO

RECEPT

- EXHAUST FAN

- ABOVE FINISHED FLOOR

ABBREVIATIONS

- GROUND FAULT PROTECTION

- GROUND CONDUCTOR

- ELECTRICAL CONTRACTOR

- CONDUITC.

GND

LTG

GFI

- LIGHTING

AFF

- ELECTRIC WATER HEATEREWH

- CENTERLINEC/L

- ELECTRIC WATER COOLEREWC

- CIRCULATION PUMPCP

- TRAP PRIMERTP

- DIGITAL MULTIPLEXDMX

SPECIAL NOTE

SEE TELECOM SHEETS FOR TELECOM AND SECURITY LEGENDS

E L E C T R I C A L G E N E R A L N O T E S A. CONTRACTOR SHALL COORDINATE ALL WORK WITH OTHER TRADES PRIOR TO INSTALLATION. REFER TO MECHANICAL AND PLUMBING DRAWINGS FOR EXACT SIZE AND LOCATION OF

EQUIPMENT WHICH IS FURNISHED BY OTHERS AND CONNECTED BY ELECTRICAL.

B. RECEPTACLES, SWITCHES AND COVERPLATES COLOR SHALL BE SELECTED BY THE ARCHITECT FROM STANDARD COLORS.

C. VERIFY ALL DOOR SWINGS WITH ARCHITECTURAL DRAWINGS PRIOR TO ROUGHING-IN WALL FOR SWITCHES.

D. LOCATION OF LIGHTING FIXTURES, DISCONNECT SWITCHES, ETC. FOR MECHANICAL EQUIPMENT/ROOM SHALL BE COORDINATED WITH FINAL MECHANICAL EQUIPMENT LOCATION TO

PROVIDE NATIONAL ELECTRIC CODE REQUIRED ACCESS SPACE.

E. FINAL CONNECTION TO ALL MOTORS SHALL BE WITH FLEXIBLE CONDUIT CONNECTION.

F. ALL EXIT AND EMERGENCY FIXTURES SHALL BE CONNECTED TO LIGHT CIRCUIT AHEAD OF LOCAL SWITCH.

G. ALL PANELBOARDS, BACKBOARDS, TERMINAL CABINETS, ETC SHALL HAVE CUSTOM ENGRAVED MICARTA NAMEPLATE MECHANICALLY AFFIXED IDENTIFYING SYSTEM.

H. PROVIDE GREEN GROUND CONDUCTOR IN ALL CIRCUITS - SIZE PER N.E.C.

I. ALL EXPOSED CONDUITS, BOXES, STRAPS AND HANGERS IN THE CONTRACT AREA WHETHER NEW OR EXISTING THAT ARE PART OF THE ELECTRICAL SYSTEM SHALL BE PAINTED TO

MATCH ADJACENT FINISH.

J. PROVIDE CONCRETE MARKER AT END OF ALL CONDUITS STUBBED OUT OF BUILDING FOR FUTURE USE. MARKER SHALL BE 6" DIA X 18" HIGH WITH 2" ABOVE FINISHED GRADE. INSCRIBE IN TOP OF MARKER "E" FOR ELECTRICAL,"T" FOR TELEPHONE,"V" FOR TV CABLE, AND "IC" FOR INTERCOM.

K. GENERAL CONTRACTOR SHALL FIELD-VERIFY ALL EXISTING CONDITIONS PRIOR TO BEGINNING ANY WORK, AND SHALL IMMEDIATELY NOTIFY THE ARCHITECT OF ANY DISCREPANCIES.

FAILURE TO DO SO INDICATES THAT THE CONTRACTOR ACCEPTS THE CONDITIONS AS THEY EXIST, AND SHALL PERFORM THE WORK REQUIRED AS SHOWN AND SPECIFIED.

L. THE ELECTRICAL CONTRACTOR SHALL OBTAIN AND REVIEW THE MECHANICAL AND SPECIAL EQUIPMENT SUBMITTALS PRIOR TO SUBMITTING THE ELECTRICAL SUBMITTALS. ANY ELECTRICAL EQUIPMENT, CONDUIT, AND WIRE SIZE CHANGES RESULTING FROM THIS REVIEW SHALL ALSO BE SUBMITTED FOR APPROVAL.

M. VERIFY EXACT LOCATION OF ALL FLOOR OUTLETS WITH THE ARCHITECT PRIOR TO ROUGHING-IN.

N. THE ELECTRICAL CONTRACTOR SHALL PROVIDE FAULT CURRENT CALCULATIONS FOR THE SERVICE EQUIPMENT AND SHALL MARK THE EQUIPMENT WITH THE AVAILABLE FAULT CURRENT AND DATE OF THE CALCULATION PER NEC 110.24. REFER TO TYPICAL SERVICE EQUIPMENT FAULT CURRENT LABEL DETAIL.

O. THE ELECTRICAL CONTRACTOR SHALL PROVIDE ARC FAULT LABELS PER NFPA 70E ARTICLE 110.16 FOR NEW EQUIPMENT. THE OWNER SHALL PROVIDE AVAILABLE CALCULATION DATA FOR THE EXISTING EQUIPMENT IN THE ELECTRICAL SYSTEM. REFER TO TYPICAL ARC FLASH HAZARD LABEL DETAIL.

P. PROVIDE NEUTRAL AT ALL LINE VOLTAGE SWITCH LOCATIONS PER N.E.C. 404.2(C).

Q. PROVIDE 'LSI' TRIP UNITS FOR ALL BREAKERS GREATER THAN OR EQUAL TO 200A.

R. PROVIDE CONDUIT BUSHINGS ON ALL ENDS OF CONDUITS.

S. COMPLY WITH ALL LOCAL CODE, LAWS, AND ORDINANCES APPLICABLE TO ELECTRICAL WORK, THE STATE BUILDING CODE AND THE NATIONAL ELECTRIC CODE. OBTAIN ALL PERMITS

REQUIRED BY LOCAL ORDINANCES.

T. OBTAIN ARCHITECTS APPROVAL OF ALL LIGHT FIXTURES, SWITCHES, RECEPTACLES, PANELBOARDS, ETC. PRIOR TO PURCHASING.

U. THE ELECTRICAL WORK SHALL BE INSTALLED IN A NEAT AND WORKMANLIKE MANNER. ALL NOT SO INSTALLED SHALL BE REMOVED AND REPLACED AT NO COST TO THE OWNER.

V. ALL WORK SHALL BE INSTALLED IN CONCEALED TYPE CONSTRUCTION. UNDERGROUND CONDUITS UP TO FIRST BOX IN CONCEALED CONSTRUCTION MAY BE SCH.40 PVC. EXTERIOR EXPOSED WORK SHALL BE I.M.C. BRANCH CIRCUIT CONDUIT RUN IN OPEN SPACES ABOVE CEILING OR IN WALLS MAY BE THINWALL (E.M.T.) CONDUIT 1/2" MIN. SIZE.

W. ALL CONDUCTORS LESS THAN 100A. SHALL BE COPPER #12 & #10 SOLID, #8 AND LARGER STRANDED, #6 AND SMALLER TO BE TYPE THWN, 600 VOLT INSULATION AND TYPE THWN OR THHN FOR #4 AND LARGER. ALUM. CONDUCTORS MAY BE USED FOR 100A. AND LARGER ONLY WHERE USED WITH COMPRESSION TERMINATIONS.

X. PROVIDE GROUNDING PER NATIONAL ELECTRIC CODE.

Y. THE CONTRACTOR SHALL LEAVE THE ENTIRE ELECTRICAL SYSTEM INSTALLED IN PROPER WORKING ORDER, AND SHALL REPLACE WITHOUT ADDITIONAL COST, ALL WORK OR MATERIAL WHICH MAY DEVELOP DEFECTS, (ORDINARY WEAR AND TEAR OR DAMAGE RESULTING FROM IMPROPER HANDLING EXCEPTED) WITHIN A PERIOD OF ONE (1) YEAR FROM THE DATE OF

FINAL ACCEPTANCE BY THE OWNER.

EXHAUST FAN; FURNISHED BY OTHERS

PHOTOCELL; REFER TO LIGHTING CONTROLS DETAILS

NON-FUSED DISCONNECT SWITCH; AMP SIZE AS NOTED

RACEWAY INSTALLED CONCEALED IN WALLS AND/OR ABOVE CEILING

RACEWAY INSTALLED CONCEALED IN FLOOR SLAB AND/OR BELOW GRADE

RACEWAY INSTALLED EXPOSED

EMERGENCY RACEWAY INSTALLED CONCEALED

CONDUIT STUB UP WITH FLEXIBLE CONDUIT CONNECTION TO EQUIPMENT

FLEXIBLE CONDUIT CONNECTION

WALL SWITCH; 120/277V; 20A; 1 POLE; A.C. ONLY; MT 48" AFF TO C/L; HUBBELL SERIES HBL1221

PANEL; 120/240V; MT 72" AFF TO TOP

MOTOR; FURNISHED BY OTHERS

EXIT SIGN; BACK MOUNTED; ARROWS AS NOTED; SHADED SECTION INDICATES LIGHTED FACE OF EXIT SIGN

JUNCTION BOX; MOUNTED ABOVE CEILING

JUNCTION BOX; MOUNTED FLUSH IN WALL WITH BLANK COVER

A-1 ADJACENT TO ARROW INDICATES HOMERUN OF CIRCUIT NO. 1 TO PANEL A; "B" INDICATES FIXTURE TYPE; MARKS ACROSS RACEWAY RUN INDICATES THE NUMBER OF NO. 12 CONDUCTORS; UNLESS NOTED OTHERWISE NO MARKS INDICATES TWO NO. 12 CONDUCTORS AND ONE NO. 12 GREEN GROUND CONDUCTOR IN 1/2" CONDUIT

2' X 2' FIXTURE WITH INTEGRAL EMERGENCY BATTERY OR CONNECTED TO AN EMERGENCY CIRCUIT AS INDICATED; CEILING MOUNTED; ARROW INDICATES LENS DIRECTION

WALL BRACKET FIXTURE

POLE MOUNTED FIXTURE

2' X 2' FIXTURE; CEILING MOUNTED; ARROW INDICATES LENS DIRECTION

2' X 4' FIXTURE; CEILING MOUNTED

(2#12 & 1#12 GND-1/2"C)

'2 X 4' FIXTURE WITH INTEGRAL EMERGENCY BATTERY OR CONNECTED TO AN EMERGENCY CIRCUIT AS INDICATED; CEILING MOUNTED

CEILING FIXTURE

E L E C T R I C A L L E G E N D 'B'

MOTOR CONTROL SWITCH; 600V; 30A; 2 POLE; A.C. ONLY; NEAR OR ON EQUIPMENT BEING SERVED; HUBBELL SERIES HBL7832D.

LOW VOLTAGE CONDUCTOR; COORDINATE WITH DEVICE CONNECTION REQUIREMENTS.CEILING MOUNTED SIMPLEX RECEPTACLE; 125V; 20A; 3 POLE GND; MT FLUSH IN CEILING UNLESS NOTED OTHERWISE; NEMA 5-20R; HUBBELL SERIES HBL5361

POWER FLOOR BOX; DUPLEX RECEPTACLE; 125V; 20A; 3 POLE GND; NEMA 5-20R; HUBBELL SERIES HBL5352; REFER TO INSTALLATION DETAIL FOR SPECIFIC INFORMATION.

DUPLEX RECEPTACLE; 125V; 20A; 3 POLE GND; MT 18" AFF TO C/L UNLESS NOTED OTHERWISE; NEMA 5-20R; HUBBELL SERIES HBL5352

DUPLEX RECEPTACLE; 125V; 20A; 3 POLE GND; GFI; MT 18" AFF TO C/L UNLESS NOTED OTHERWISE; NEMA GF-5-20R; HUBBELL SERIES GF5362

LETTERS "WP" ADJACENT TO SYMBOL INDICATES GFI WEATHER RESISTANT RECEPTACLE; HUBBELL HBL5362WR WITH WEATHERPROOF COVER; PASS AND SEYMOUR WIUFC10S

QUAD RECEPTACLE; 125V; 20A; 3 POLE GND; MT 18" AFF TO C/L UNLESS NOTED OTHERWISE; NEMA 5-20R; HUBBELL SERIES HBL5352

DUPLEX RECEPTACLE FOR TELEVISION WITH TVSS PROTECTION, LED AND ALARM; 125V; 20A; 2 POLE; 3 WIRE; GND; SEE TELECOM PLANS FOR MOUNTING DETAILS.

NEMA 5-20R; HUBBELL SERIES HBL5362SA

QUAD RECEPTACLE; 125V; 20A; 3 POLE GND; GFI; MT 18" AFF TO C/L UNLESS NOTED OTHERWISE; NEMA GF-5-20R; HUBBELL SERIES GF5362

ROOM CONTROLLER; INSTALL CONCEALED ABOVE CEILING SPACE; REFER TO LIGHTING CONTROLS DETAILS

LOW VOLTAGE VACANCY SENSOR; 360° DUAL-TECHNOLOGY TYPE; CEILING MOUNTED; UNLESS OTHERWISE NOTED; REFER TO LIGHTING CONTROLS DETAILS

LIGHTING CONTROLS SYSTEM NETWORK BRIDGE; INSTALL CONCEALED ABOVE CEILING; REFER TO LIGHTING CONTROLS DETAILS

COVER/BOX.

LETTERS +XX" ADJACENT TO SYMBOL INDICATES RECEPTACLE MOUNTING HEIGHT.

+AC" = ABOVE COUNTER OR BACKSPLASH (+46" MAXIMUM TO TOP OF DEVICE)

+DF" = VERIFY HEIGHT FOR DRINKING FOUNTAIN WITH MECHANICAL CONTRACTOR

+TV" = VERIFY HEIGHT OF TV WITH OWNER.

+REF" = +60" AFF TO CENTERLINE

- FIRE ALARM ANNUNCIATORANNUNC

- FIRE ALARM CONTROL PANELFACP

SPECIAL TYPE RECEPTACLE 'X' DENOTES NEMA TYPE; CEILING MOUNTED; VERIFY EXACT LOCATION & REQUIREMENTS WITH EQUIPMENT CONTRACTOR.

A = 120V, 30A, 2P, 3W, NEMA L5-30R; HUBBELL SERIES HBL9330.

LIGHTING NETWORK CONTROLLER

SPECIAL TYPE RECEPTACLE 'X' DENOTES NEMA TYPE; WALL MOUNTED; VERIFY EXACT LOCATION & REQUIREMENTS WITH EQUIPMENT CONTRACTOR.

A = 120V, 30A, 2P, 3W, NEMA L5-30R; HUBBELL SERIES HBL9330.

LOW VOLTAGE HIGH-BAY OCCUPANCY SENSOR; PASSIVE INFRARED TYPE; CEILING MOUNTED; UNLESS OTHERWISE NOTED; REFER TO LIGHTING CONTROLS DETAILS

LOW VOLTAGE WALL SWITCH WITH VACANCY SENSOR; DUAL TECHNOLOGY; CONNECT TO LOCAL POWER PACK/ROOM CONTROLLER; MT 48" AFF TO

C/L; REFER TO SPECS; WATTSTOPPER #LMDW-101-W.

L# LOW VOLTAGE WALL SWITCH; CONNECT TO LOCAL NETWORK ROOM CONTROLLER; MT 48" AFF TO C/L; REFER TO SPECS; SEE LIGHTING CONTROL DETAILS

SYMBOL "#" INDICATES BUTTON COUNT.

8:0 6 A

- E

1.0 0 L

dw g

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

E 1.

E N

D A

N D

N O

Sheet Index Sheet

Number Sheet Title

E1.00 LEGEND AND NOTES

E2.00 SITE PLAN ELECTRICAL

E3.00 FLOOR PLAN ELECTRICAL

E3.01 FLOOR PLAN HVAC POWER

E3.02 FLOOR PLAN LIGHTING

E4.00 DETAILS ELECTRICAL

E4.01 DETAILS ELECTRICAL

E4.02 DETAILS ELECTRICAL

E4.03 DETAILS GROUNDING

E4.04 LIGHTING CONTROLS DETAILS AND SCHEDULES

E4.05 LIGHTING CONTROLS DETAILS

E4.06 LIGHTING CONTROLS DETAILS

E5.00 SINGLE LINE POWER RISER AND DETAILS

PS1.0 PHOTMETRIC CALCULATIONS

INSTALL ROOM CONTROLLER (AND/OR BRIDGE) ADJACENT TO PANEL SERVING CIRCUIT

ON 'DIN RAIL' ASSEMBLY IN ELECTRICAL ROOM.

INSTALL ELECTRICAL PULLBOX FOR TELECOM UTILITY SERVICE ENTRANCE.

2-2" EMPTY CONDUIT FOR TELECOMMUNICATIONS SERVICE ENTRANCE REQUIREMENTS.

4 RUNS OF 2"C WITH PULL RIBBON, STUB-OUT, CAP AND MARK LOCATION. THE

ELECTRICAL CONTRACTOR SHALL COORDINATE WITH THE SERVING ELECTRIC UTILITY

FOR ALL SERVICE REQUIREMENTS, CONNECTION WORK, AND APPLICABLE UTILITY

IMPACT / CONNECTION FEES. COORDINATION SHALL INCLUDE CONFIRMING WITH THE

OWNER WHETHER THE OWNER OR CONTRACTOR WILL BE RESPONSIBLE FOR PAYMENT

OF SUCH FEES.

EXISTING UTILITY POWER POLE TO REMAIN.

APPROXIMATE LOCATION OF EXISTING FIBER NETWORK FOR CONNECTION TO NEW

BUILDING BY OTHERS.

NOTES:

MDP

A-25

2'PL5' 2'PL5' 2'PL5'

'PL2'

2'PL5'

'PL5'

EXISTING

BUILDING

EXISTING

BUILDING

EXISTING

BUILDING

EXISTING

BUILDING

EXISTING

BUILDING

NEW

BUILDING

'PL2S'

'PL2'

CT CABINET AND

ELECTRIC METER

NEW UTILITY COMPANY PAD MOUNTED

TRANSFORMER. REFER TO SINGLE LINE

POWER RISER FOR MORE INFORMATION.

NEW UNDERGROUND SECONDARY

SERVICE ENTRANCE. REFER TO

SINGLE LINE POWER RISER.

PANEL-MDP

TELECOM

BACKBOARD

8:0 6 A

- E

2.0 0 S

L.d wg

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

SITE PLAN ELECTRICAL

1" = 30'-0" 15' 30' 60'

E 2.

E P

MDP

SHOP

WAREHOUSE

CONCRETE

APRON

SUPERVISOR

ASSISTANT

WORKROOM

GROUNDS

SUPERVISOR

STAFF

MECH/ELEC

BREAK RM

TLT

MAINT

PORCH

INSTALL (3)1" EMPTY CONDUITS WITH PULLRIBBONS 36" PAST FOOTER AND BACK TO

PANEL-A; FOR FUTURE USE. STUB-OUT, CAP AND MARK LOCATION. SEAL ALL CONDUIT

SEGMENTS.

CONNECT DEVICE TO GFCI BREAKER.

INSTALL JUNCTION BOX ABOVE CEILING (OR NEAR DOOR IN EXPOSED WORK SPACES)

FOR CONNECTION TO POWERED ACCESS CONTROLLED DOOR BEING PROVIDED BY

OTHERS AND CONNECTED BY ELECTRICAL CONTRACTOR.

TELECOM BACKBOARD, 4FT. WIDE X 8 FT. HIGH X 3/4" EXTERIOR PLYWOOD. PAINT TWO

COATS FIRE RETARDANT PAINT. INSTALL ONE NO. 6 COPPER GROUND CONDUCTOR IN

3/4" CONDUIT TO BUILDING GROUND, LEAVE 4 FT. SLACK CONDUCTOR AT BACKBOARD.

INSTALL (3)1" EMPTY CONDUITS WITH PULLRIBBONS 36" PAST FOOTER AND BACK TO

PANEL-SH; FOR FUTURE USE. STUB-OUT, CAP AND MARK LOCATION. SEAL ALL CONDUIT

SEGMENTS.

INSTALL (2)2" EMPTY CONDUITS WITH PULLRIBBONS 36" PAST FOOTER AND BACK TO

PANEL-MDP; FOR FUTURE USE. STUB-OUT, CAP AND MARK LOCATION. SEAL ALL

CONDUIT SEGMENTS.

INSTALL RECEPTACLE FOR FUTURE CORD REEL BEING PROVIDED AND INSTALLED BY

OTHERS.

COORDINATE LOCATION OF STUB-UP FLOOR OUTLET WITH ARCHITECT AND OWNER

PRIOR TO ROUGHING IN FOR LOCATION. REFER TO INSTALLATION DETAIL FOR

REQUIREMENTS.

NOTES:

CT CABINET AND

ELECTRIC METER

+AC"

+REF

+TV"

+AC" +48"

+DF"

WPWPWPWPWPWPWPWP

+TV"

ACCESS CONTROL

SYSTEM PANEL

+48"+48" +48" +48" +48"

+48" +48"

+48"+48"+48" +48"

+48" +48" +48"

+48"

SH-9-11SH-5-7

+48"

SH-14-16

AIR COMPRESSOR

(OWNER FURNISEHD)

SH-18

SH-22

SH-1-3

SH-6-8

SH-27

SH-25

SH-23

SH-21

SH-19

SH-24

SH-26

+48"

SH-17

SH-10-12

SH-2-4

SH-20

3R230

A-1

A-2

A-4

A-11

A-16

A-14

A-7 A-20

A-9

A-15A-12

A-10

A-6 A-5

A-3

A-18

A-17

J 3

+AC"

A-13

8:0 6 A

- E

3.0 0 F

.dw g

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

FLOOR PLAN ELECTRICAL

1/8" = 1'-0" 4' 8' 16'

E 3.

O R

N E

SHOP

WAREHOUSE

CONCRETE

APRON

SUPERVISOR

ASSISTANT

WORKROOM

GROUNDS

SUPERVISOR

STAFF

MECH/ELEC

BREAK RM

TLT

MAINT

PORCH

INSTALL 40AMP, 120V, MOTOR RATED SWITCH ADJACENT TO EQUIPMENT. COORDINATE

SPECIFIC REQUIREMENTS WITH EQUIPMENT INSTALLER.

INSTALL 20AMP, 120V, MOTOR RATED SWITCH ADJACENT TO EQUIPMENT. COORDINATE

SPECIFIC REQUIREMENTS WITH EQUIPMENT INSTALLER.

INSTALL 20AMP, 208V, MOTOR RATED SWITCH ADJACENT TO EQUIPMENT. COORDINATE

SPECIFIC REQUIREMENTS WITH EQUIPMENT INSTALLER.

CONNECT TO LIGHTING CIRCUIT SERVING THIS SPACE. EXHAUST FAN IS TO BE

INTERLOCKED WITH LIGHTING.

CONNECT TO GENERAL PURPOSE RECEPTACLE CIRCUIT SERVING THIS SPACE.

2#10,1#12GND IN 3/4"C.

NOTES:

CT CABINET AND

ELECTRIC METER

AHU-2

AHU-3

CU-2 CU-3

EF-1

EF-4

AHU-1

HP-1

EF-5 EF-5

IRH-2

IRH-1 IRH-1

IRH-1

EWH-1

EWH-2

EF-1

IRH-1

MDP-5-7

MDP-6-8

3R260

3R230

MDP-13-15 MDP-14-16

3R230

MDP-12

MDP-9-11

MDP-12

SH-13-15

2 2

MDP-17

SH-29

SH-30-32

2 2

8:0 6 A

- E

3.0 1 F

.dw g

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

FLOOR PLAN HVAC POWER

1/8" = 1'-0" 4' 8' 16'

E 3.

O R

N H

P O

W E

SHOP

WAREHOUSE

CONCRETE

APRON

SUPERVISOR

ASSISTANT

WORKROOM

GROUNDS

SUPERVISOR

STAFF

MECH/ELEC

109BREAK RM

TLT

MAINT

PORCH

INSTALL ROOM CONTROLLER (AND/OR BRIDGE) ADJACENT TO PANEL SERVING CIRCUIT

ON 'DIN RAIL' ASSEMBLY IN ELECTRICAL ROOM.

NOTES:

*** LIGHTING LAYOUTS NOTE ***

ALL CEILING LAYOUTS SHALL BE COORDINATED WITH

ARCHITECTURAL REFLECTED CEILING PLANS. ANY CONFLICTS

IDENTIFIED SHALL BE COORDINATED WITH THE ARCHITECT.

'WP''WP''WP'

'WP''WP' 'WP' 'WP' 'WP' 'WP'

'WP''WP'

'WP'

'X''X'

'X' 'X'

8'HB'

9'HBE'

4'HB'

5'HBE'

vv v v v v v

A-27

4'HB'

A-19SH-28 A-21

L1L1

A-22

A-24

'XF'

VS VS

A-23

INSTALL PHOTOCELL

APPROX. 10'-0" AFG

RM 1

A-26

L1L1 R

L1R

2'L24'

2'L24' 1'L24E'

2'L24F'2'L24F'

'L2 4F

11'L24' 7'L24E'

L1R

BRBR

HSHSHS

CT CABINET AND

ELECTRIC METER

8:0 6 A

- E

3.0 2 F

LIG

dw g

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

FLOOR PLAN LIGHTING

1/8" = 1'-0" 4' 8' 16'

E 3.

O R

N L

NOTES

1. WIRING DEVICES SHALL NOT BE USED FOR

SPLICING. USE A PIGTAIL TO CONNECT EACH

DEVICE AS SHOWN.

N GØ

LB/5-33

JUNCTION BOX

GREEN GROUNDING

SCREW-#10-32X3/8"

TAPPED HOLE

IN BOX

CIRCUIT MARKER ON

PHASE CONDUCTOR

PER SPECIFICATIONS

WIRE NUT

(TYPICAL)

CONDUIT

G GN

OFF

SWITCHING N Ø

HB/5-5

JUNCTION BOX

GREEN GROUNDING

SCREW-#10-32X3/8"

TAPPED HOLE

IN BOX

CIRCUIT MARKER ON

PHASE CONDUCTOR

PER SPECIFICATIONS

WIRE NUT

(TYPICAL)

CONDUIT

NOTES

1 WIRING DEVICES SHALL NOT BE USED FOR

SPLICING. USE A PIGTAIL TO CONNECT EACH

DEVICE AS SHOWN.

2 PULL NEUTRAL CONDUCTOR TO SWITCH LOCATION

AS REQUIRED BY 402.2(C)

TYPICAL SWITCH WIRING

NTS

TYPICAL RECEPTACLE WIRING

NTS

SERVED FROM MAIN PANEL

TYPICAL ELECTRICAL EQUIPMENT NAMEPLATE

1 PHASE 3 WIRE

PANEL A

IN ELECTRICAL ROOM

NOT TO SCALE

120/240 VOLTS

"THIS AREA

TYPICAL FLOOR MARKING AT ELECTRICAL PANELS

NOT TO SCALE

ELECTRICAL PANEL

NO STORAGE

6" 6"

DISCONNECT SWITCH

DESCRIPTION NOMENCLATURE

XX/X/XX

22,000 AIC RATING

TYPICAL SERVICE EQUIPMENT FAULT CURRENT LABEL DETAIL

NOT TO SCALE

WARNING

MAXIMUM AVAILABLE FAULT CURRENT

/ / DATE OF CALCULATION

SYMMETRICAL RMS AMPERES

EQUIPMENT NAME

COMPANY RESPONSIBLE FOR CALCULATION CONTACT INFORMATION; COMPANY NAME, ADDRESS, PHONE NUMBER

TYPICAL ARC FLASH HAZARD LABEL DETAIL

NOT TO SCALE

Arc Flash and Shock Risks Appropriate PPE Required

WARNING

ARC FLASH RISK PROTECTION MINIMUM PPE

SHOCK PROTECTION

Arc Flash Boundary 19 in Incident Energy: 1.3 cal/cm^2

Shock Risk When 480 VAC Cover is Removed Limited Approach: 42 in Restricted Approach: 12 in

4 cal/sq cm, FR shirt (long-sleeve) plus FR pants (long), or FR coverall, rainwear as needed.

Hardhat + Safety Glasses or Goggles + Ear Canal Inserts Glove Class 00

Leather work shoes Bus ID:

Prot Device ID:

Calculated Fault Current:

Date of Analysis:

Warning: Changes in equipment settings or system configuration may invalidate the calculated results.

WHITE

ORANGE

4"H x 6"W VINYL LABEL WITH

BLACK LETTERING PER ANSI Z535 STANDARDS.

TYPICAL ELECTRICAL EQUIPMENT

ABOVE CEILING NAMEPLATE

NOT TO SCALE

SENSOR CONTROLS

ABOVE CEILING

4" MAX.

2" MAX.

SHADED SECTION

INDICATES LIGHTED

FACE OF EXIT SIGN

ARROWS INDICATE

DIRECTION OF ARROWS

ON EXIT SIGN

NOT TO SCALE

EXIT SIGN NOMENCLATURE

WHITE

ORANGE

4"H x 6"W VINYL LABEL WITH

BLACK LETTERING PER ANSI Z535 STANDARDS.

MICARTA ENGRAVED NAMEPLATE

WITH WHITE LETTERS ON BLACK

BACKGROUND, MECHANICALLY AFFIXED.

6" HIGH x 1" WIDE

RED LETTERS

3" WIDE YELLOW PAINT

STRIPE - TYPICAL

WALL

1/4" LETTERS

1/2" LETTERS

MICARTA ENGRAVED NAMEPLATE WITH

BLACK LETTERS ON WHITE BACKGROUND,

MECHANICALLY AFFIXED TO CEILING TILE

OR WALL WITH BOLTS, NUTS AND

WASHERS

1/4" LETTERS IDENTIFYING

ELECTRICAL EQUIPMENT

AMPERE RATING NEMA RATING

NUMBER OF POLES

GENERAL NOTE

REFER TO MECHANICAL SCHEDULE FOR

DISCONNECT, CONDUIT, AND WIRE SIZE.

NOT TO SCALE

LIGHTING FIXTURE NOMENCLATURE

FIXTURE

IDENTIFIER LABEL

TYPICAL ZONE OF

CONTROL IF INDICATEDA

'L24A'

EQUIPMENT NAMEPLATE

ARC FLASH LABEL

PANELBOARD LABELING

PANELBOARD NAMEPLATES

PANEL XXXX

208Y/120V

FED FROM

PANEL XXXX-1,3,5

PANEL NAME

PANEL SYSTEM

VOLTAGE

PANEL SOURCE

NOTES

1. PROVIDE LABEL FOR ALL PANELS FEED FROM A FEEDER

2. NORMAL POWER - 1/4" BLACK LETTERS ON WHITE PANEL

3. EMERGENCY POWER - 1/4" WHITE LETTERS ON RED

PANEL

EQUIPMENT NAMEPLATE

ARC FLASH LABEL

EQUIPMENT LABELING

SERVICE EQUIPMENT MARKING

NOTES

1. REQUIRED IN ADDITION TO ARC FLASH LABEL

2. 1/4" WHITE LETTERS ON BLACK PANEL.

NOTES

1. PROVIDE LABEL IF NOT PROVIDED BY MANUFACTURER.

2. 3/8" WHITE LETTERS ON BLACK PANEL

AVAILABLE FAULT CURRENT

XXXXXX AMPS DATE:DD/MM/YYYY

SERVICE

DISCONNECT

EQUIPMENT NAME

FED FROM

PANEL XXXX-1,3,5

LOCATED

ROOM XXX

EQUIPMENT NAME FED

FROM DISCONNECT

SOURCE PANEL

LOCATION OF

SOURCE PANEL

NOTES

1. NAMEPLATE MUST INDICATE DISCONNECT PURPOSE.

2. NAMEPLATE MUST INDICATE SOURCE AND SOURCE LOCATION.

3. NORMAL POWER - 1/4" BLACK LETTERS ON WHITE PANEL

4. EMERGENCY POWER - 1/4" WHITE LETTERS ON RED PANEL

DISCONNECT NAMEPLATE

NTS

EQUIPMENT LABELING DETAILS

2-7/8" WIDE X 2-1/2" DEEP

5-5/8"

HUBBELL SERIES SA-6685(3/4"C.) OR

SA-6686(1"C.)

PROVIDE APPROPRIATE DEVICE(S) AND

PLATE(S) AS REQUIRED

FULL THREAD NIPPLE

COUPLING SET FLUSH WITH FINISHED FLOOR

RIGID GALV. STEEL CONDUIT (12" MINIMUM)

PVC TO RIGID ADAPTER

FINISHED FLOOR

NTS

RECEPTACLE - FLOOR STUB-UP

18" DIAMETER

PROJECTION FOR DOUBLE

NUTS PLUS 1/2"

HEADED ANCHOR BOLTS

18" LONG x 7/8" DIA, A307 HOT DIP

GALVANIZED-4 REQ'D

3/4" CONDUIT

#4 BAR AT 4 CORNERS WITH

#4 BAR AT 12" ON CENTER

3000 PSI CONCRETE

@ 28 DAYS

3/4" CONDUIT

8 FT. x 3/4" DIA

COPPER CLAD STEEL

DRIVEN GROUND ROD

FINISHED GRADE

HAND RUB AND CHAMFER

ALL EXPOSED CONCRETE

POLE BASE COVER

ATTACH TO POLE, DO NOT BOND

TO BUILDING CONDUIT SYSTEM

48"

1#6 BARE COPPER GROUND

CONDUCTOR IN 3/4"C

NUTS CONNECTING POLE AND BASE

NTS

CONCRETE POLE BASE

FOR FIXTURE "PLxx"

8:0 6 A

- E

4.0 0 D

L.d wg

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

E 4.

D E

S E

-APPLIES TO ALL CORRIDOR, SMOKE AND FIRE RATED WALLS

NOT TO SCALE

WALL PENETRATIONS

NOTE:

SMALL DIAMETER GAPS

OPENINGS UP TO 3" DIA.

3"3" 3"3"

OPENINGS OVER 3" DIA.

CENTERLINE OF STUDS

MAX

6"6"

MAX

MAXMAX

6"3"

IN ONE HOUR WALLS

24"

LESS THAN 24"(PER U.L.)

ADJACENT ELECTRICAL BOXESFIVE SIDED ELECTRICAL BOX

WALL DETAILS - ELECTRICAL BOX INSTALLATION

NOT TO SCALE

FIXTURE MOUNTED TO BOTTOM OF CEILING GRID

NOT TO SCALE

SURFACE MOUNT FIXTURE CABLE SUPPORT DETAIL

FLANGE MOUNT FIXTURE IN GYP BOARD CEILING

NOT TO SCALE

GYP CEILING

CEILING GRID

LAY-IN FIXTURE CABLE SUPPORT DETAIL

NOT TO SCALE

NOTE:

FOR ONE HOUR OR TWO HOUR FIRE OR SMOKE

WALL; MAXIMUM 100 SQUARE INCHES OF OPENING

PER 100 SQUARE FEET OF WALL SURFACE.

ACOUSTICAL SEAL AT

BOX PENETRATION

BUTTER BACK SIDE OF PATCH

WITH JOINT COMPOUND-DO NOT

STRIKE OFF EXCESS.

LEAVE SCREWS EXPOSED

MAXIMUM GAP 1/8"

NON-SMOKE ONE HOUR OR LESS

NO TREATMENT. SMOKE WALLS

SURFACE BEAD OF USG ACOUSTICAL

TREATMENT.

MAXIMUM GAP 1/4"

FILL WITH JOINT COMPOUND

ONE HOUR OR SMOKE WALLS

MAXIMUM GAP 1/2"

FILL WITH USG ACOUSTICAL

SEALANT REF CEG 1-25-85.

ONE HOUR OR SMOKE WALLS

NEMA TYPE 'F' (FLANGE)

FIXTURE MOUNT (TYPICAL)

SPACER BETWEEN GYP CEILING

FLANGE MOUNT HARDWARE

ADJUSTABLE SCREW

FLANGE MOUNT FIXTURE

2#12, 1#12GND. IN

1/2"x6'-0"(MAX) FLEXIBLE

CONDUIT CONNECTION

TYPICAL FIXTURE MOUNTED TO

BOTTOM OF GRID WITH SCREWS

AND SECURED WITH HANGER WIRES

CONDUIT RACEWAY AND JBOX

ATTACHED TO STRUCTURE

TYPICAL SCREW SECURING FIXTURE

TO CEILING GRID (MIN TWO PER SIDE)

OUTLET BOX

OUTLET BOX NO. OF LAYERS PER HOUR RATING

LAMINATE BACK PIECE

OUTLET BOX

JOINT AT 2ND

LAYER (2HR)

TYPE 'G' SCREWS-MINIMUM

2 PER SECTION

TYPE 'G' SCREWS 6" O.C. MAXIMUM

MINIMUM 2 TYPE 'S' SCREWS PER SECTION

CEILING GRID SYSTEM

CABLE SUPPORT, TWO PER

FIXTURE (MIN) ON OPPOSING

CORNERS, CONNECT TO

BUILDING STRUCTURE

PER NEC 300.11

LAY-IN

LIGHT FIXTURE.

TYPICAL FIXTURE CONNECTION

TO GRID PER N.E.C. 410-36(B)

2#12, 1#12GND. IN

1/2"x6'-0"(MAX) FLEXIBLE

CONDUIT CONNECTION

CONDUIT RACEWAY AND JBOX

ATTACHED TO STRUCTURE

CEILING GRID SYSTEM

CABLE SUPPORT, ON ALL

FOUR CORNERS, CONNECT

TO BUILDING STRUCTURE

CABLE SUPPORT, ON ALL

FOUR CORNERS, CONNECT

TO BUILDING STRUCTURE

TYPICAL STUD

TYPICAL POWER ONLY

NOT TO SCALE

EQUAL TO STEEL CITY

2-GANG JUNCTION BOX

2G-3/4.

18" AFF C/L

TYPICAL POWER & COMMUNICATIONS

NOT TO SCALE

18" AFF C/L

ATTACH TO

WALL STUD

BOX MOUNTING

BRACKET EQUAL

TO STEEL CITY

WORKSTATION CABLE

AND PLUG. (TYPICAL)

BOX MOUNTING

BRACKET EQUAL

TO STEEL CITY

SSF-SB16

2-GANG JUNCTION BOX

EQUAL TO STEEL CITY

2G-3/4.

2-GANG BOX COVER

WITH 1-GANG RING

EQUAL TO STEEL CITY

#1-GC. (TYPICAL)

2-GANG BOX COVER

WITH 1-GANG RING

EQUAL TO STEEL CITY

#1-GC.

2-GANG JUNCTION BOX

EQUAL TO STEEL CITY

2G-3/4.

EACH END

WALL STUD

ATTACH TO

NEMA 3R DISCONNECT SWITCH

MAINTENANCE RECEPTACLE WITH

IN-USE COVER WITHIN 25' OF

EQUIPMENT

CONDENSING UNIT/SPLIT UNIT OR

OTHER MECHANICAL EQUIPMENT

LFNC OR LFMC IS REQUIRED

SEE SPECIFICATIONS FOR UNDERGROUND

BRANCH CIRCUIT REQUIREMENTS

NTS

OUTDOOR MECHANICAL EQUIPMENT CONNECTION

CONDUIT MOUNT FIXTURE CABLE SUPPORT DETAIL

NOT TO SCALE

PENDANT MOUNTED

LIGHT FIXTURE.

IF STEM IS LONGER THAN 18" PROVIDE SWIVEL

HANGERS LISTED FOR LOCATION INSTALLED.

THREADED HUB

12"

FIXTURE SHALL NOT EXCEED

12" IN LENGTH FROM

CONDUIT ENTRY

STEM SHALL BE IMC OR RMC

8:0 6 A

- E

4.0 1 D

L.d wg

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

E 4.

D E

S E

CONDUIT MARKER DETAIL

NOT TO SCALE

RED MARKER TAPE

18"

2" ABOVE GRADE

6" DIA.

12"

24" MIN.

NOT TO SCALE

TYPICAL PULLBOX DETAIL

24 1/2"

22 1/4"

BOX

33 7/8"

35 5/8"

37 5/8"

COVER

26"

ELECTRIC

24"

SECTION

21"

PVC STUB-UP DETAILS

WITHOUT OUTLET BOXWITH OUTLET BOX

NOT TO SCALE

MAX

FEEDER CONDUIT

46"

MAX

EXPOSED OR

CONCRETE RING

AROUND BOX

CHAMFER EDGES

3/8-16 UNC STAINLESS

STEEL HEX HEAD BOLT

W/WASHER (2)

SKID RESISTANT

SURFACE

1/2" x 4"

PULL SLOT

4" x 4" MOUSEHOLES

(2) PG2436BB

WALL OUTLET

PVC CONDUIT

CONCEALED IN WALL

PVC COUPLER

FINISHED FLOOR

PVC-2 1/2" MAXIMUM

PVC COUPLER

EMT CONDUIT

CONCEALED IN WALL

PVC TO EMT ADAPTER

FINISHED FLOOR

PVC-2 1/2" MAXIMUM

PVC COUPLER

EMT CONDUIT

RIGID TO EMT ADAPTER

FINISHED FLOOR

RIGID CONDUIT

PVC CONDUIT

PVC TO RIGID ADAPTER

CAP CONDUIT END EMPTY CONDUIT

WITH PULLRIBBON

INSCRIBE IN TOP OF MARKER:

"E" FOR ELECTRICAL

"T" FOR TELEPHONE

"V" FOR CABLE TV.

FINISHED GRADE

COVER RATED AT 5,000 PSI

OVER 10"x10" AREA. LABEL

"ELECTRIC".

6 TO 8 INCHES

GRAVEL

COMPACTED EARTH

PLASTIC BUSHING ON

EACH CONDUIT END

UNDERGROUND CONDUIT DETAIL

NOT TO SCALE

FINISHED GRADE

RED MARKER TAPE

CONDUIT

ELEVATION

PLAN

DIMENSIONS

TRANSFORMER

45-225 KVA 3Ø

300-1000 KVA 3Ø

'A' 76" 96"

'B' 72" 96"

'C' 10" 17"

'D' 56" 62"

'E' 20" 22"

'F' 6" 8"

'G' 'H' 29" 35"

21" 21"

'T-TAP' 'T-TAP'

(DO NOT FILL THIS AREA WITH CONCRETE)

'J' 6"

'J' 'J' 'J' 'J'

FINISHED GRADE

3/4" x 20FT COPPERCLAD STEEL SECTIONAL

DRIVEN GROUND ROD-TYPICAL FOR FOUR

3/0 BARE COPPER

GROUND GRID-TYPICAL

3/0 COPPER IN

PRIMARY SECTION

3/0 COPPER IN

SECONDARY SECTION

#4 BARS

12" O.C.

'A'

'B'

TYP. 'C' 'D' 'C'

'E'

'F'

1" CHAMFER

8" 6"

'G' 6"

'H'

PRIMARY

CONDUIT

ZONE

CONDUIT

ZONE

SECONDARY

CONDUIT

ZONE

4" 8"

GENERAL NOTES

1. INSTALL WITH A MINIMUM CLEARANCE OF 10 FT FROM ALL BUILDINGS AND

OBSTRUCTIONS.

2. CONCRETE SHALL HAVE A MINIMUM ULTIMATE 28 DAY COMPRESSIVE

STRENGTH OF NOT LESS THAN 3000 LBS. PAD SHALL NOT BE CURED LESS

THAN 72 HOURS. PAD MOUNTING SURFACE SHALL BE LEVEL, SMOOTH AND

UNIFORM.

3. SECURE TRANSFORMER TO CONCRETE PAD WITH ANCHOR BOLTS AS

DIRECTED BY UTILITY COMPANY.

NTS

STANDARD CONCRETE PAD FOR

RADIAL OR LOOP FEED PAD

MOUNTED TRANSFORMER

LABEL "ELECTRIC" OR

"TELCOM" PER SYSTEM.

8:0 6 A

- E

4.0 2 D

L.d wg

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

E 4.

D E

S E

FINISHED FLOOR

T E

L E

B A

C K

B O

A R

MAIN GROUNDING

ELECTRODE

GROUND BAR

TYPICAL - EACH CABLE:

LABEL WITH TYPE GROUND

I.E. "TELE BACKBOARD",

"COLD WATER GROUND",

4" HIGH CONCRETE CURB

AROUND CONDUITS

TYPICAL ENCLOSURE: EQUAL TO CARLON 'CIRCUIT-SAFE' JIC

ENCLOSURE: NON-METALLIC; SIDE OPENING, HINGED DOOR WITH

LOCK OR CATCH; POLYCARBONATE CONSTRUCTION. PROVIDE

A MICARTA PLATE, MECHANICALLY ATTACHED TO OUTSIDE

OF DOOR, ENGRAVED IN LETTERS 1" HIGH TO READ

"MAIN GROUND BUS BAR". SIZE ENCLOSURE TO ENSURE

A MINIMUM OF 2" CLEARANCE AT EACH END OF THE

GROUND BAR

NTS

GROUNDING SYSTEM

TYPICAL ENCLOSURE

3/8" DIA.

7/16" DIA.

10"L (COPPER)

.25" 2"

GROUND BAR NOTES

1. INSTALL ONE BAR AT EACH COMMUNICATIONS ROOM.

2. ROUTE 1#4 BARE CU IN 1"CONDUIT FROM GROUND BAR TO BUILDING

ELECTRICAL SERVICE ENTRANCE GROUND.

3. CONNECT BARS WITH 1#6 BARE CU IN 1" CONDUIT.

NTS

INSULATED GROUNDING BAR DETAIL

5/8" LOCKWASHER

5/8"X1" H.H.C.S. BOLT

INSULATORS

WALL MTG. BRACKET

GROUND BAR

NEUTRALGROUND

3 1

#4 W/60OV INSULATION

MAIN GROUNDING

ELECTRODE

GROUND BAR

GAS PIPE AND OTHER

METAL PIPING SYSTEMS

IN AND ON THE STRUCTURE

BUILDING

STRUCTURAL

STEEL

METAL WATER PIPE WITHIN

5 FT OF ENTRANCE

4 4 4

120/240 VOLT

POWER PANELBOARD

120/240 VOLT

SERVICE ENTRANCE

EQUIPMENT

TELECOMMUNICATIONS

BACKBOARD

7'-6"

MIN.

7'-6"

MIN.

GENERAL NOTES

1. BOND HOT AND COLD WATER PIPING SYSTEMS.

2. CONDUCTOR SIZES SHOWN ARE MINIMUM AND MAY BE LARGER THAN THE MINIMUM SIZES

REQUIRED BY NEC.

3. INSTALL GROUNDING CONNECTIONS TO BUILDING STRUCTURE AND WATER PIPES AT

LOCATIONS THAT ARE VISIBLE AND ACCESSIBLE FOR INSPECTION, MAINTENANCE, AND

TESTING.

4. INSTALL AN INSULATED THROAT GROUNDING BUSHING ON EACH METALLIC SERVICE

ENTRANCE CONDUIT. BOND TO GROUND BUS USING CONDUCTOR THAT IS SIZED BASED

ON NEC TABLE 250-66 USING THE SERVICE PHASE CONDUCTOR SIZE.

5. INSTALL AN INSULATED THROAT GROUNDING BUSHING ON EACH METALLIC FEEDER

CONDUIT. BOND TO GROUND BUS USING CONDUCTOR THAT IS SIZED BASED ON NEC

TABLE 250-122 USING THE FEEDER CIRCUIT OVERCURRENT DEVICE SIZE OR THE

SEPARATELY DERIVED SYSTEM OVERCURRENT DEVICE SIZE.

KEYNOTES

INSTALL GROUNDED (NEUTRAL) CONDUCTOR SAME SIZE AS THE LARGEST PHASE CONDUCTOR IF

THE LINE-TO-NEUTRAL LOAD EXCEEDS 5% OF THE CONNECTED LOAD. IF NEUTRAL LOAD IS

SMALLER, INSTALL THE NEC MINIMUM GROUNDED CONDUCTOR.

INSTALL GROUNDING ELECTRODE CONDUCTOR, SIZED BASED ON NEC TABLE 250-66 USING THE SERVICE

PHASE CONDUCTOR SIZE, BUT NOT SMALLER THAN NO 4.

INSTALL EQUIPMENT GROUNDING CONDUCTOR SIZED BASED ON NEC TABLE 250-122 USING THE FEEDER

OVERCURRENT DEVICE SIZE.

10 FOOT MINIMUM X 3/4" DIAMETER COPPER CLAD STEEL SECTIONAL DRIVEN GROUND ROD.

INSTALL BONDING JUMPER WIRE THAT IS SIZED BASED ON NEC TABLE 250-66 OR 250.28(D)(1) USING THE

SERVICE OR SEPARATELY-DERIVED SYSTEM PHASE PHASE CONDUCTOR SIZE.

INSTALL A COPPER GROUNDING BAR IN EACH TELECOMMUNICATIONS ROOM. CONNECT TO THE "MAIN GROUNDING ELECTRODE GROUND BAR" USING 600V INSULATED #4 COPPER CABLE AND COMPRESSION

SPADE LUGS.

INSTALL A "MAIN GROUND ELECTRODE GROUND BAR" FOR SINGLE POINT GROUNDING. LOCATE AT AN ACCESSIBLE POINT NEAR THE SERVICE ENTRANCE EQUIPMENT. MAKE CONNECTIONS TO THE GROUND ELECTRODE CONDUCTOR USING IRREVERSIBLE CONNECTORS OR EXOTHERMIC WELDS. MAKE OTHER CONNECTIONS TO THE GROUND BAR USING TWO-HOLE COMPRESSION SPADE LUGS THAT MEET IEEE 837

REQUIREMENTS. LABEL EACH CONNECTION TO THE GROUND BAR

NTS

120/240V GROUNDING SYSTEM DIAGRAM

8:0 6 A

- E

4.0 3 D

.dw g

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

E 4.

D E

S G

R O

U N

L1 L1R

NTS

TYPICAL SWITCH BUTTON

COUNT ARRANGEMENTS

GENERAL NOTES

1. SWITCH BUTTON LABELING INDICATES A DEFAULT SCHEME. OWNER

TO PROVIDE ACTUAL LABELING DURING THE CONSTRUCTION PHASE

OF THIS PROJECT. IF THE OWNER DOES NOT MAKE ANY DECISION,

THEN THE DEFAULT LABELING MAY BE UTILIZED. VERIFY WITH

OWNER PRIOR TO PROCEEDING WITH ORDERING OF ANY AND ALL

BUTTON ENGRAVING. REFER TO SPECIFIC DETAILS FOR ROOM

SPACE LABELING REQUIREMENTS.

NTS

TYPICAL SWITCH BUTTON

LABELING DEFAULT OPTIONS

LEGRAND LEGRAND

LIGHTING CONTROL GENERAL NOTES

1. THE DIAGRAMS ARE NOT INTENDED TO SHOW EXACT QUANTITIES OF DEVICES. REFER TO PLAN FOR ESTIMATED DEVICE QUANTITIES AND LOCATIONS.

2. THE LIGHTING CONTROL SYSTEM BASIS OF DESIGN IS WATTSTOPPER DLM PRODUCTS.

3. THE LOCAL DEVICE INTERCONNECTIONS FOR ALL LIGHTING CONTROL DEVICES SHALL BE OF THE TOPOLOGY FREE TYPE.

4. COLORS FOR ALL DEVICES AND DEVICE COVERS SHALL BE SELECTED BY THE ARCHITECT.

5. ALL DATA LINE SWITCHES SHALL INCLUDE CUSTOM ENGRAVED LABEL INDICATING FUNCTION OF SWITCH. COORDINATE EXACT LABEL DESCRIPTIONS WITH OWNER

PRIOR TO INSTALLATION.

6. PROVIDE ADDITIONAL POWER AND CONTROL MODULES AS RECOMMENDED BY THE SYSTEM SUPPLIER.

7. THE DIAGRAMS REPRESENT A TYPICAL SYSTEM AND ARE NOT INTENDED FOR INSTALLATION, SYSTEM SUPPLIER SHALL PROVIDE INSTALLATION DRAWINGS AND WIRING

DIAGRAMS.

8. E.C. SHALL COORDINATE FIELD PROGRAMMING OF LIGHTING CONTROL SYSTEM WITH SYSTEM PROGRAMMER, SPECIFYING ENGINEER, AND OWNER TO ENSURE PROPER

OPERATION AND TIME SCHEDULES.

9. ALL EMERGENCY AND EXIT LIGHTING CIRCUITS SHALL BE CONNECTED TO CONTINUOUS POWER SOURCE AHEAD OF RELAY PANEL OR INDIVIDUAL RELAY COMPONENTS.

10. INSTALL ALL CEILING SENSORS MINIMUM OF 6FT CLEAR OF DUCT REGISTERS. PROVIDE 6FT. OF SLACK CONDUCTOR TO ALLOW FOR FIELD ADJUSTMENT.

11. THE LIGHTING CONTROL AND EMERGENCY LIGHTING SYSTEMS SHALL BE CAPABLE OF BEING ACCESSED VIA THE LOCAL AREA NETWORK.

12. PROGRAMMER / COMMISSIONING AGENT SHALL BE CERTIFIED BY THE EQUIPMENT MANUFACTURER ON THE SYSTEM INSTALLED.

13. THE MANUFACTURER CERTIFIED TECHNICIAN WILL MEET ONSITE WITH THE ELECTRICAL CONTRACTORS TO COORDINATE INSTALLATION DETAILS, REVIEW BEST PRACTICES, AND DISCUSS PROJECT SPECIFIC CHALLENGES; PRIOR TO THE INSTALLATION BEING STARTED, ENABLING THE CONTRACTORS TO WORK WITH THE

TECHNICIAN TO PREPARE AND MAKE CHANGES UP FRONT.

14. THE MANUFACTURER'S LIGHTING SYSTEMS TEAM SHALL WORK ONSITE AFTER FIXTURE AND CONTROLS INSTALLATION IS COMPLETED. THE MANUFACTURER'S AGENT IS TO VERIFY THE PROJECT IS REVIEWED AND CHECKED FOR PROPER WIRING, INSTALLATION AND FUNCTIONALITY OF THE SYSTEM AS A WHOLE. ANY PROBLEMS SHALL

BE ADDRESSED AND RESOLVED WITH THE ONSITE CONTRACTORS.

15. MANUFACTURER'S TECHNICIANS SHALL MAP OUT THE FIXTURE LOCATIONS AND ADDRESSES WITHIN THE LIGHTING CONTROL SOFTWARE. ASTRONOMIC TIMECLOCK EVENTS, SCENES, AND SCHEDULES ARE PROGRAMMED ACCORDING TO A PRE-DEFINED SCRIPT. THESE EVENTS, SCENES, AND SCHEDULES ARE TESTED AND FINALIZED

FOR FINAL APPROVAL BY THE PROJECT'S OWNERSHIP.

16. MANUFACTURER'S TECHNICIANS SHALL PROVIDE TRAINING FOR SYSTEM USERS AND THE SYSTEM MAINTENANCE TEAM. THE DETAILS OF THE TECHNOLOGY SHALL BE COVERED FROM A MAINTENANCE AND TROUBLESHOOTING POINT OF VIEW. THIS COVERS THE LIGHTING CONTROL SYSTEM AND ITS CORE FUNCTIONALITY, WITH A

FOCUS ON HOW TO EDIT EXISTING SCENES AND ASTRONOMIC LIGHTING EVENTS.

17. THE MANUFACTURER'S REPRESENTATIVE SHALL PROVIDE IN-DEPTH TRAINING TO THE END USER ON MANAGING THE SPECIFIC CONTROL SYSTEM, GIVING THEM THE

TOOLS AND KNOWLEDGE TO OPERATE THEIR SYSTEM.

LMPB-100

WATTSTOPPER

LMZC-301NO

NETWORK BRIDGE

(LMBC-300)

NETWORK BRIDGE

(LMBC-300)

NETWORK BRIDGE

(LMBC-300)

TO DLM DEVICES IN

ROOM/SPACE

TO DLM DEVICES IN

ROOM/SPACE

TO DLM DEVICES IN

ROOM/SPACE

TO NEXT

BRIDGE

(32-MAX.)

MULTI-STRAND TWISTED

PAIR NETWORK CABLING

(LM-MSTP)

INPUT/OUTPUT

INTERFACE

(LMIN-104)

PHOTOCELL

(LMPO-200)

INPUT/OUTPUT

INTERFACE

(LMIN-104)

TO FIRE ALARM

SYSTEM CONTACT

CLOSURE.

24VDC

LOW VOLTAGE

(2#18AWG)

NTS

TYPICAL BRIDGE DEVICE CONNECTION DETAILS

8:0 6 A

- E

4.0 4 L

.dw g

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

E 4.

N G

C O

D E

S A

N D

S C

H E

D U

R + - S

(+)WHITE

(-)BLACK

(R)GREEN/WHITE

FROM PREVIOUS DLM

NETWORK DEVICE

TO NEXT DLM

NETWORK DEVICE

MULTI-STRAND TWISTED

PAIR NETWORK CABLING

(LM-MSTP)

TWIST AND WRAP

SHIELD TOGETHER

WRAP SHIELD WITH TAPE

FOR STRAIN RELIEF

MULTI-STRAND TWISTED

PAIR NETWORK CABLING

(LM-MSTP)

TO NEXT DLM

NETWORK DEVICE

FROM PREVIOUS DLM

NETWORK DEVICE

MULTI-STRAND TWISTED

PAIR NETWORK CABLING

(LM-MSTP)

FROM PREVIOUS DLM

NETWORK DEVICE

120Ω

RESISTOR

END OF LINE

DIAGRAM

INTERCONNECTION

DIAGRAM

CRIMP

INSULATION STRIP

GUIDE

INSULATED WIRE

FERRULE

0.25" 1.25"

FERRULE

LM-MSTP

TAPE

LM-MSTP

FROM PREVIOUS DLM

NETWORK DEVICE (+)WHITE

(-)BLACK

(R)GREEN/WHITE

MULTI-STRAND TWISTED

PAIR NETWORK CABLING

(LM-MSTP)

TWIST AND WRAP

SHIELD TOGETHER

WRAP SHIELD WITH TAPE

FOR STRAIN RELIEF

120Ω

RESISTOR

NTS

TYPICAL BRIDGE DEVICE

CONNECTION DETAILS

KEYNOTES

NO CONNECTION ON 'S' TERMINAL

120Ω RESISTOR (INCLUDED) IS REQUIRED FOR END OF

LINE TERMINATION.

NORMAL SWITCH LEG

NORMAL

LIGHTING

PANEL

NORMAL NEUTRAL

NORMAL HOT

(120/240V)

TO NEXT DLM

NETWORK DEVICE

FROM PREVIOUS DLM

NETWORK DEVICE

ROOM

CONTROLLER

EQUAL TO

WATTSTOPPER

LMRC-111-M

(20 AMP MAX)

NORMAL NEUTRAL

CAP

MULTI-STRAND TWISTED

PAIR EQUAL TO

WATTSTOPPER LM-MSTP

WHITE (NEUTRAL IN)

BLACK (120/277V IN)

RED (LOAD-A SWITCHED OUT)

VIOLET (LOAD-A DIM)

GRAY (LOAD-A DIM)

TYPICAL WALL

MOUNTED FIXTURE

NORMAL SWITCH LEG

ROOM

CONTROLLER

EQUAL TO

WATTSTOPPER

LMRC-111-M

(20 AMP MAX)

NORMAL NEUTRAL

CAP

NTS

BLDG EXTERIOR / PARKING AREA LIGHTING CONTROL

WHITE (NEUTRAL IN)

BLACK (120/277V IN)

RED (LOAD-A SWITCHED OUT)

VIOLET (LOAD-A DIM)

GRAY (LOAD-A DIM)

TYPICAL POLE

MOUNTED FIXTURE

NORMAL SWITCH LEG

TYPICAL

NORMAL

FIXTURE

NORMAL

LIGHTING

PANEL

NORMAL NEUTRAL

NORMAL HOT

(120/240V)

TO NEXT DLM

NETWORK DEVICE

FROM PREVIOUS DLM

NETWORK DEVICE

ROOM

CONTROLLER

EQUAL TO

WATTSTOPPER

LMRC-111

(20 AMP MAX)

NORMAL NEUTRAL

CAP

MULTI-STRAND TWISTED

PAIR EQUAL TO

WATTSTOPPER LM-MSTP

WHITE (NEUTRAL IN)

BLACK (120/277V IN)

RED (LOAD-A SWITCHED OUT)

VIOLET (LOAD-A DIM)

GRAY (LOAD-A DIM)

LEGRAND

LOW VOLTAGE WALL

SWITCH EQUAL TO

WATTSTOPPER

LMSW-210-W

NTS

MAINTENANCE PORCH AREA LIGHTING CONTROL

NORMAL NEUTRAL

NORMAL HOT

8:0 7 A

- E

4.0 5 L

.dw g

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

E 4.

N G

C O

D E

CEILING MOUNT

VACANCY SENSOR

EQUAL TO

WATTSTOPPER

LMDC-100

NORMAL SWITCH LEG

TYPICAL

NORMAL

FIXTURE

NORMAL

LIGHTING

PANEL

NORMAL NEUTRAL

NORMAL HOT

(120/240V)

TO NEXT DLM

NETWORK DEVICE

FROM PREVIOUS DLM

NETWORK DEVICE

ROOM

CONTROLLER

EQUAL TO

WATTSTOPPER

LMRC-111-M

(20 AMP MAX)

NORMAL NEUTRAL

MULTI-STRAND TWISTED

PAIR EQUAL TO

WATTSTOPPER LM-MSTP

NTS

WORKROOM AREA NORMAL LIGHTING

(SWITCHING) CONTROL WITH VACANCY

SENSOR, AND SWITCH INPUT

WHITE (NEUTRAL IN)

BLACK (120/277V IN)

RED (LOAD-A SWITCHED OUT)

VIOLET (LOAD-A DIM)

GRAY (LOAD-A DIM)

LEGRAND

LOW VOLTAGE WALL

SWITCH EQUAL TO

WATTSTOPPER

LMSW-211-W

LEGRAND

LOW VOLTAGE WALL

SWITCH EQUAL TO

WATTSTOPPER

LMSW-210-W

MAINTENANCE

OVERRIDE SWITCHING

CONTROL

LEGRAND

LOW VOLTAGE WALL

SWITCH EQUAL TO

WATTSTOPPER

LMSW-211-W

NORMAL SWITCH LEG

TYPICAL

NORMAL

FIXTURE

NORMAL NEUTRAL

NORMAL

LIGHTING

PANEL

NORMAL NEUTRAL

NORMAL HOT

(120/240V)

TO NEXT DLM

NETWORK DEVICE

FROM PREVIOUS DLM

NETWORK DEVICE

ROOM

CONTROLLER

EQUAL TO

WATTSTOPPER

LMRC-111-M

(20 AMP MAX)

CAP

MULTI-STRAND TWISTED

PAIR EQUAL TO

WATTSTOPPER LM-MSTP

WHITE (NEUTRAL IN)

BLACK (120/277V IN)

RED (LOAD-A SWITCHED OUT)

VIOLET (LOAD-A DIM)

GRAY (LOAD-A DIM)

ROOM

CONTROLLER

EQUAL TO

WATTSTOPPER

LMRC-111-M

(20 AMP MAX)

CAP

NTS

WAREHOUSE AREA LIGHTING CONTROL

WHITE (NEUTRAL IN)

BLACK (120/277V IN)

RED (LOAD-A SWITCHED OUT)

VIOLET (LOAD-A DIM)

GRAY (LOAD-A DIM)

NORMAL NEUTRAL

NORMAL HOT

NORMAL SWITCH LEG

TYPICAL

NORMAL

FIXTURE

NORMAL NEUTRAL

CEILING MOUNT

OCCUPANCY SENSOR

EQUAL TO

WATTSTOPPER

LMPC-100

NORMAL SWITCH LEG

TYPICAL

NORMAL

FIXTURE

NORMAL

LIGHTING

PANEL

NORMAL NEUTRAL

NORMAL HOT

(120/240V)

TO NEXT DLM

NETWORK DEVICE

FROM PREVIOUS DLM

NETWORK DEVICE

ROOM

CONTROLLER

EQUAL TO

WATTSTOPPER

LMRC-111

(20 AMP MAX)

NORMAL NEUTRAL

CAP

MULTI-STRAND TWISTED

PAIR EQUAL TO

WATTSTOPPER LM-MSTP

WHITE (NEUTRAL IN)

BLACK (120/277V IN)

RED (LOAD-A SWITCHED OUT)

VIOLET (LOAD-A DIM)

GRAY (LOAD-A DIM)

LEGRAND

LOW VOLTAGE WALL

SWITCH EQUAL TO

WATTSTOPPER

LMSW-210-W

NTS

SHOP AREA LIGHTING CONTROL

8:0 7 A

- E

4.0 6 L

.dw g

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

E 4.

N G

C O

D E

INSTALL SURGE PROTECTIVE DEVICE IN BREAKER POSITION NEAREST TO NEUTRAL BAR WITH 3#6, 1#10 GND IN 3/4"C;

LEAD LENGTH CANNOT EXCEED UL 1449 4TH EDITION TEST OF 14" - REFER TO SPECS. PROVIDE INTERNAL 60A. FUSING.

INSTALL SURGE PROTECTIVE DEVICE IN BREAKER POSITION NEAREST TO NEUTRAL BAR WITH 3#10, 1#10 GND IN 3/4"C;

LEAD LENGTH CANNOT EXCEED UL 1449 4TH EDITION TEST OF 14" - REFER TO SPECS. PROVIDE INTERNAL 30A. FUSING.

INSTALL 2-2" EMPTY CONDUITS WITH PULLRIBBONS 36" PAST FOOTER AND BACK TO PANEL AS INDICATED; FOR FUTURE USE. STUB-OUT, TERMINATE IN PULLBOX AND MARK LOCATION. REFER TO FLOOR PLAN FOR LOCATION.

INSTALL 3-1" EMPTY CONDUITS WITH PULLRIBBONS 36" PAST FOOTER AND BACK TO PANEL AS INDICATED; FOR FUTURE USE. STUB-OUT, TERMINATE IN PULLBOX AND MARK LOCATION. REFER TO FLOOR PLAN FOR LOCATION.

4 RUNS OF 2"C WITH PULL RIBBON, STUB-OUT, CAP AND MARK LOCATION. THE ELECTRICAL CONTRACTOR SHALL COORDINATE WITH THE SERVING ELECTRIC UTILITY FOR ALL SERVICE REQUIREMENTS, CONNECTION WORK, AND APPLICABLE UTILITY IMPACT / CONNECTION FEES. COORDINATION SHALL INCLUDE CONFIRMING WITH THE OWNER

WHETHER THE OWNER OR CONTRACTOR WILL BE RESPONSIBLE FOR PAYMENT OF SUCH FEES.

PROVIDE 'LSI' TRIP UNITS FOR BREAKERS GREATER

THAN OR EQUAL TO 200A.

SINGLE LINE POWER RISER

NOTES:

*** SPECIAL NOTE ***

NOT TO SCALE

FINISHED

FLOOR

208Y/120V

3PH, 4W

MCB

NEW

NEMA 1

PANEL

MDP

600A

208Y/120V

3PH, 4W

MLO

NEW

NEMA 1

PANEL

175A

208Y/120V

3PH, 4W

MCB

NEW

NEMA 1

PANEL

300A

3 2

FINISHED

FLOOR

NEW PAD MOUNTED

TRANSFORMER BY UTILITY

COMPANY. CONCRETE PAD BY

CONTRACTOR PER UTILITY

COMPANY REQUIREMENTS.

FINISHED

GRADE

C.T.

CABINET

30"SQx12"D

MINIMUM

NEW

ELECTRIC

METER

8:0 7 A

- E

5.0 0 S

LIN

.dw g

Job No.

Christopher A. Garick; FL. PE No.53924 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

26004 llc

D A

D R

A W

N B

P R

C T

N O

R E

S E

P T

, 2

R .E

N G

C .P

A S

P R O

FESS IONA L ENG

I N E

E R

PHER A . GAR

ICKL I C E N S E

STATE OF

No. 53924

FLO RIDA

C R

E S

W , F

O ka lo os a C ou nt y

B E

L R

O A

Fa ci lit ie s W ar eh ou se

E 5.

E P

O W

E R

A N

D D

Calculation Summary Label CalcType Units Avg Max Min Avg/Min Max/Min Parking Illuminance Fc 1.41 4.5 0.2 7.05 22.50 Spill Illuminance Fc 0.24 7.6 0.0 N.A. N.A.

0.8 1.0 0.9 0.8 0.7 0.6 0.5 0.7 0.7 0.8 1.0 0.8 0.9 0.9 0.9 0.7 0.7 0.5 0.3 0.2

0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.5 0.5 0.4 0.4 0.4 0.5 0.5 0.6 0.6 0.5 0.5 0.4 0.4 0.3 0.3

0.5 0.5 0.6 0.6 0.7 0.8 0.8 0.8 0.7 0.6 0.6 0.6 0.6 0.7 0.7 0.8 0.9 0.8 0.7 0.6 0.6 0.5 0.5 0.5

0.7 0.8 0.9 0.9 0.9 1.0 1.2 1.2 1.1 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.1 1.0 0.9 0.9 0.9 0.8 0.7

1.1 1.2 1.3 1.3 1.3 1.4 1.5 1.6 1.5 1.4 1.3 1.4 1.4 1.4 1.3 1.4 1.5 1.6 1.5 1.4 1.3 1.3 1.3 1.2 1.1

1.4 1.6 1.8 1.8 1.6 1.7 1.8 1.8 1.8 1.7 1.7 1.8 1.9 1.8 1.7 1.7 1.8 1.8 1.8 1.7 1.7 1.8 1.8 1.6 1.4

1.8 2.3 2.6 2.4 2.1 1.9 1.9 1.9 1.9 1.9 2.1 2.5 2.7 2.4 2.1 1.9 1.9 1.9 1.9 1.9 2.1 2.5 2.6 2.3 1.8

2.5 3.2 3.6 3.3 2.7 2.2 2.1 2.1 2.1 2.2 2.8 3.4 3.7 3.3 2.7 2.2 2.1 2.1 2.1 2.3 2.8 3.4 3.6 3.2 2.4

3.2 3.9 4.2 4.0 3.3 2.5 2.3 2.3 2.3 2.6 3.4 4.1 4.2 4.0 3.3 2.5 2.3 2.3 2.3 2.6 3.5 4.1 4.2 3.9 3.0 2.1

3.4 4.2 4.3 4.2 3.6 2.7 2.4 2.4 2.4 2.7 3.7 4.3 4.3 4.2 3.6 2.7 2.4 2.5 2.5 2.8 3.8 4.4 4.4 4.1 3.3

3.0 3.9 4.1 4.0 3.2 2.5 2.3 2.3 2.3 2.5 3.3 4.0 4.2 4.0 3.2 2.5 2.3 2.3 2.4 2.7 3.5 4.1 4.2 3.9 3.0

2.3 3.0 3.4 3.1 2.5 2.1 2.0 2.0 2.0 2.2 2.6 3.2 3.5 3.1 2.6 2.2 2.1 2.1 2.1 2.3 2.8 3.4 3.6 3.2 2.4

1.7 2.1 2.4 2.2 2.0 1.9 1.9 1.8 1.9 1.9 2.0 2.3 2.5 2.2 2.0 1.9 1.9 1.9 2.0 2.1 2.2 2.5 2.7 2.4 2.0

1.3 1.6 1.7 1.6 1.6 1.6 1.7 1.8 1.7 1.6 1.6 1.7 1.8 1.7 1.6 1.7 1.8 1.9 1.8 1.8 1.8 2.0 2.1 1.9 1.7

1.0 1.2 1.3 1.2 1.2 1.3 1.4 1.5 1.4 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.5 1.6 1.6 1.5 1.5 1.6 1.7 1.6 1.5

0.8 0.8 0.8 0.8 0.9 0.9 1.1 1.1 1.1 1.0 0.9 0.9 0.9 0.9 0.9 1.0 1.1 1.2 1.2 1.2 1.2 1.2 1.3 1.3 1.3 1.4

0.7 0.7 0.5 0.5 0.6 0.6 0.7 0.8 0.7 0.6 0.6 0.5 0.5 0.6 0.6 0.7 0.8 0.8 0.9 0.9 0.9 1.0 1.0 1.1 1.3 1.5 1.6 1.6 1.3 1.0 0.8 0.6

0.8 0.7 0.4 0.3 0.4 0.4 0.5 0.5 0.5 0.4 0.4 0.4 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.8 0.8 0.9 1.1 1.4 1.7 1.8 1.8 1.6 1.2 0.9 0.7 0.5 0.4

1.1 1.0 0.4 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.3 0.3 0.3 0.4 0.4 0.5 0.7 0.8 0.9 1.2 1.6 1.8 1.9 1.9 1.7 1.3 0.9 0.7 0.6 0.4

1.7 1.3 0.4 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.4 0.5 0.8 1.0 1.2 1.7 1.8 1.9 1.9 1.7 1.4 1.0 0.8 0.6 0.4

2.5 1.7 0.4 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.4 0.6 0.9 1.0 1.1 1.5 1.8 1.8 1.8 1.6 1.2 0.9 0.8 0.7 0.5

3.5 1.9 0.4 1.1 1.0 1.1 1.3 1.6 1.7 1.6 1.4 1.1 0.9 0.8 0.7 0.5

4.5 2.0 0.4 1.2 1.1 1.1 1.2 1.4 1.5 1.4 1.2 1.0 1.0 0.8 0.7 0.5

4.4 2.0 0.4 1.2 1.1 1.1 1.2 1.3 1.4 1.3 1.2 1.0 1.0 0.9 0.7 0.5

3.4 1.9 0.4 1.2 1.1 1.2 1.3 1.4 1.6 1.4 1.2 1.0 0.9 0.8 0.7 0.5

2.3 1.7 0.5 1.1 1.1 1.3 1.5 1.7 1.8 1.7 1.4 1.1 0.9 0.8 0.6 0.5

1.7 1.5 0.6 0.3 0.3 0.4 0.6 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.7 0.6 0.7 1.0 1.2 1.4 1.7 2.0 1.9 1.9 1.6 1.2 0.9 0.8 0.6 0.4

1.2 1.1 0.6 0.4 0.3 0.5 0.6 0.8 0.9 1.0 1.1 1.2 1.2 1.2 1.1 1.0 1.0 0.9 0.7 0.6 0.8 1.0 1.3 1.6 1.9 2.0 1.9 1.9 1.7 1.3 0.9 0.7 0.6 0.4

0.3 0.7 1.0 1.1 0.8 0.5 0.4 0.5 0.7 0.9 1.1 1.2 1.4 1.6 1.7 1.6 1.4 1.3 1.1 1.0 0.8 0.7 0.8 1.1 1.4 1.7 2.0 2.1 1.9 1.9 1.6 1.2 0.8 0.7 0.5 0.4

0.3 0.7 1.1 1.3 1.1 0.6 0.4 0.5 0.7 1.0 1.2 1.5 1.8 2.2 2.5 2.2 1.7 1.5 1.3 1.0 0.9 0.8 0.8 1.2 1.7 1.9 1.9 1.9 1.8 1.6 1.3 1.0 0.7 0.6

0.3 0.7 1.3 1.8 1.7 0.8 0.5 0.6 0.8 1.1 1.4 1.8 2.5 3.2 3.5 3.1 2.3 1.7 1.4 1.1 0.9 0.8 0.8 1.3 2.2 2.4 2.0 1.7 1.5 1.2 1.0 0.7 0.6 0.5

0.4 0.9 1.7 2.6 2.3 1.1 0.7 0.7 0.9 1.2 1.6 2.1 3.2 4.0 4.1 3.8 3.0 2.0 1.6 1.3 1.0 0.9 1.0 1.5 2.9 3.1 2.2 1.6

0.4 1.1 2.0 3.0 2.7 1.8 0.8 0.7 1.0 1.3 1.7 2.3 3.5 4.2 4.3 4.1 3.3 2.2 1.7 1.3 1.0 0.9 1.2 2.3 3.2 3.4 2.4 1.6

0.4 0.9 1.7 2.6 2.3 1.1 0.7 0.7 0.9 1.2 1.6 2.1 3.2 3.9 4.1 3.8 3.0 2.0 1.6 1.3 1.0 0.8 0.9 1.5 2.8 2.9 2.0 1.3

0.3 0.7 1.2 1.8 1.7 0.8 0.5 0.6 0.8 1.1 1.4 1.8 2.4 3.2 3.5 3.1 2.3 1.7 1.4 1.1 0.9 0.7 0.7 1.1 2.0 2.0 1.5 1.0

0.3 0.6 0.9 1.1 1.1 0.6 0.4 0.5 0.7 1.0 1.2 1.5 1.8 2.2 2.4 2.1 1.7 1.5 1.2 1.0 0.8 0.6 0.6 0.8 1.2 1.3 1.0 0.7

0.2 0.4 0.6 0.7 0.7 0.5 0.4 0.5 0.7 0.9 1.1 1.2 1.3 1.6 1.7 1.5 1.3 1.2 1.1 0.9 0.7 0.5 0.5 0.6 0.8 0.8 0.7 0.5

0.4 0.5 0.4 0.4 0.3 0.4 0.6 0.8 0.9 0.9 1.0 1.1 1.1 1.0 0.9 0.9 0.8 0.6 0.5 0.4 0.4 0.5 0.5

0.3 0.3 0.3 0.3 0.3 0.4 0.5 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.6 0.6 0.5 0.4 0.3 0.3 0.4 0.40.5 fc

0.5 fc

1 fc

2 fc

2 fc2 fc

2 fc

3 fc

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Oct 7, 2026.