25Q5015 PD GENERAL LRS AUTO TOOL CRIB.pdf

PURCHASE DESCRIPTION

W50S6R25Q5015

Snap-on

GENERAL TOOL SPECIFICATIONS / CHARACTERISTICS

Wrenches, sockets, ratchets and pliers:

• Meet or exceed ASME standards B107.100-2010.

• Hand tools have nickel-chrome plating (Zinc finish on Allen wrenches and safety wire pliers).

• Ratchets have a sealed head design, constructed to seal in permanent lubrication and seal out dust, dirt, moisture and other contaminants.

• Sockets have double chamfer at both the drive and wrench openings as well as four grooved detents that allows secure attachment to the socket.

• Socket extensions have knurled surface at drive end and a double chamfer design at both ends.

• 80 tooth design for 3/8 and 1/2-inch drive ratchets; 72 tooth for 1/4-inch drive and dual pawl mechanism for all.

• Wrenches have 7.5° offset broaching.

• Wrenches, sockets and nut drivers have a Flank-drive style design.

• Compact durable index with individual holes for Allen Wrench Sets (metric and standard) w/ retention mechanism to prevent wrenches from falling out. The size of the applicable wrench is printed on the case.

• Adjustable wrenches, pliers & side cutters have highly visible elastomer cushion grips to prevent hand slippage.

• Sockets and wrench box ends have smallest outside diameter possible to provide clearance in limited access situations.

• All torque wrenches are on the AFMETCAL listing of test equipment that the Government PMEL can calibrate.

Screwdrivers:

• Wide tri-lobe design in the center of the handle and Snap-on® bolstered, special alloy steel blade supply turning power when needed.

• Tip identifier on the crown helps to quickly identify the needed tool.

• Handles have a highly visible color for quick location of tool.

• Soft grip handles provide increased comfort and control with a rounded crown (not fluted) while resisting most shop solvents.

• Nickel/chrome-plating helps protect against corrosion and promotes easy clean up.

• Soft grip handle provides maximum turning power and greater comfort.

• Precision cut and vapor-blasted tips for the best possible grip and help prevent chrome plating from peeling.

• Replaceable blades, cold forged from high carbon alloy steel and heat treated for optimum strength and durability.

• Hexagon bolster prevents blade from being forced into handle and provides wrench assisted turning.

Hammers:

• Plastic face has ribbed, textured grip with energy absorbing microcellular to material enhance comfort and reduces vibration.

• Handles have chemical resistant urethane covering and multi-position hand grip to allow user to "choke up" in tighter work areas.

• All have wide flare at end of handle helps prevent slipping.

Punches and Chisels

• Anvil end on heads of punches and chisels are machined to a modified parabolic curve to control mushrooming and reduce chipping.

• Machined and differentially heat treated for optimum performance.

• The hardness of the striking head is reduced to reduce mushrooming.

Prybars:

• Blades have a precision-ground edge, with angled design for maximum leverage while lifting and pulling on bar.

• Manufactured from special alloy steel, precision forged and heat treated for optimum strength.

• Industrial finish to help to protect against corrosion.

• Have ergonomic handle with tapered design for comfortable grip.

• Blades extend through the handles and contact the metal end caps to provide a continuous, solid, striking force.

• Have flared end on handles to offer protection from off-center handle strikes.

Tool Boxes:

• Toolboxes have 14-gauge steel super-duty skid support systems.

• Toolboxes have 16-gauge steel on top, bottom, sides and back.

• Toolboxes have 4 corner gussets each.

• Casters are heavy duty with a weight capacity of 1700 pounds.

• Standing Seams create full perimeter support to strengthen top of box.

• Heavy-duty drawer slides support up to 227 lb per set.

• Toolboxes have Lock 'N Roll® System to prevent drawers from drifting open when the unit is moved

Etching:

• Each individual tool, and tool cases for small tools, will have laser etching of the Worldwide Identification (WWID) which will be supplied by the customer.

• Markings are clear and readable and will not affect the function of the tool and will not cause corrosion problems.

• Etching will not be applied to the shafts of screwdrivers, calibrated measuring surfaces, and impact surfaces.

• Etching will not adversely affect the chrome plating on plated tools. Etching will not be provided on items listed as

“customer furnished” or “customer supplied tools”.

• Etching on handling surfaces will not present an injury hazard to the hand.

• Safety glasses and goggles will not be etched in the “viewing area”.

Tool Box Foam Specifications & Characteristics

BASE LAYER BACKER MATERIAL

Physical Characteristics:

• Hard Back

• Polyethylene 75-99%, proprietary additives 01-25%

• Thickness: 1/8”

• Colors: RED

• Density: Minimum 60 lb.

CHEMICAL REISTANCE CHARACTERISTICS:

• Tested in accordance with ASTM D543-2000

MACHINING CAPABILITY:

• Backer material can be router cut; water jet cut or die cut and maintain the physical properties required to adequately meet varying retention requirements of different customers.

• Backer material provides the capability to incorporate identification numbers in the silhouette pockets as required.

TOP LAYER FOAM PRODUCTS

PHYSICAL CHARACTERISTICS:

• Cross-linked polyethylene, skinned top and bottom

• Thickness: 1/8”-4” (determined by what is required to hold tool securely in its cut-out location, no less than ½”)

• Colors: BLACK

• Density: 4 lb.

TECHNICAL CHARACTERISTICS: 3 lb/ft

• Nominal Density (PCF): 3

• Tensile Strength (PSI): 70

• Elongation (% to break): 150

• Tear Resistance (lb/in): 17

• Compression Strength (PSI)

• (25% deflection): 12

• Compression Set

• (% of original thickness): 18

• Thermal Stability

• (% of chg @ 158 degrees for 24 hrs): <.6

• Working Temperature Range -70 degrees F to 175 degrees F

• Water Absorption (lb/ft2/degree F) : <.05

• Melting Point 219degreesF-280degreesF

• Auto Ignition Point >60 degrees F

CHEMICAL RESISTANCE CHARACTERISTICS:

Tested in accordance with ASTM D543-2000. Resistant to all common solvents, oils, hydraulic fluids, skydrol, etc.

MACHINING CAPABILITY:

Foam will be water jet cut to maintain the physical properties required to adequately meet varying retention requirements of customer.

FOAM JOINING:

• The base and top layers must be securely adhered together, with no adhesive residue in tool cut-outs.

• Adhesive method must resist common chemicals.

WARRANTY SUPPORT

Snap-on provides lifetime on-site warranty verification to repair or replace tools. Snap-on will not accept a vendor that requires them to mail tools in for warranty support or one that requires them to bring broken tools to them for warranty support. For further details on Snap-on’s warranty program please visit https://www.snapon.com/Terms-and-Conditions-of-Sale.

http://www.snapon.com/Terms-and-Conditions-

Level 5 ATC V4 Cabinet Bid Specification Rev. A

8 May 2023

Snap-on Level 5 ATC Cabinet

Toolbox Features Automatic issue and return of RFID tagged assets Audible announcements and messages Tool Status Displays Tool Search Proximity Card Scanner for User Identification User defined work locations User Photo Display Tool box status display User adjustable functions and settings Touchscreen power off button Wired or Wireless networking Open door alarm Multi-Language Support

Snap-on Level 5 ATC Admin Client

Administration Software Specific Features

L5C Admin Dashboard Tab features

ATC System Status Tools Status ATC system Alerts Top Employees with issued tools Top systems with Issued tools Recent events log

L5C Admin Locations Tab Features

Create and organize locations Manage L5C devices Create event notifications Set type of notification: Text or Email

L5C Admin Tools Tab Features

Create and manage tool instances List available tool masters Define maintenance and quality monitors

L5C Admin Tool States Tab Features

Real-time status updates Filters based on custom reports Exportable to excel

L5C Admin Employees Tab functions

User Search by name or badge number Add/ Remove Users Set User Permissions Set User to receive Notifications

L5C Admin Groups Tab function

Group Search by name Add and Remove Groups Set Group Options and Permissions Assign a Group to a Location

L5C Admin History Tab functions View History log and archive images Apply Filters to results to narrow search

L5C Admin Reports Tab functions

Many Pre-created Reports Available Report Sorting Create Custom Reports Schedule Reports Email and Text Delivery Multi-Format (RTF, Excel, HTML, PDF)

L5C Admin Settings Tab functions

Set language preference for local admin Obtain system log files Select Local server path Software release version ATC Service machine and ports Define custom tool statuses

For further information refer to L5 Connect documentation

Snap-on Level 5 ATC Cabinet Electronics

External Components Display Widescreen 13.3-inch Resistive Touch Card Reader RFIdeas pcProx Plus 82 Series I/O 3x USB 3.0 Ports Data Port RJ45 Gigabit Ethernet Port

HID compatible Proximity Card Sensor:

Toolbox - RFIDEAS PN: RDR-805W2AKU Admin PC Kit - RFIDEAS PN: RDR- 80582AKU

Power Components Power Supply Sparkle Power FSP4001K31M1-SOT Power Port CORCOM 10EEJ1

15-ft Power Cord

North America: NEMA 5-15R (4 Amps max) UK: BS1363 (2.5 Amps max) EU: Schuko (2.5 Amps max)

Input voltage – 100VAC - 240VAC / 4.6 – 2.3 A / 47/63 Hz Output voltages –300 W Max without moving air 18VDC, 16.67 A

Main System Board CPU Intel® Celeron J6412 Quad Core SoC up to 2.6GHz Burst

Frequency, Elkhart Lake Platform Memory 16GB DDR4-3200 SODIMM RAM Network Intel® Wi-Fi 6E AX210 and Intel® I225-LM (2.5GbE) Gigabit

Ethernet Storage Samsung 980 PCIe® 3.0 NVMe® SSD 500GB Operating System Windows 10 Enterprise LTSC 2019

Snap-on Proprietary Peripheral Control Board Ethernet Communications Hub Lock Control Power Distribution

RFID Tags and Antennas Radio Frequency Range

902-928 MHz (US) 866-868 MHz (EU)

8 May 2023

Snap-on Level 5 ATC Mechanicals

Casing for Electronics Painted steel mounting frame fitted on top of the tool box Electromechanical Lock Module HES ABBA ABLOY Cabinet based on Snap-on’s EPIQ series locker Standard 2 fully metal shelves, 3 fully metal drawers

Max Weight Bearing Capacity

• Shelves: 20.2 kg / 44.4 lbs.

• Drawers: 46.3 kg / 101.86 lbs.

Standing seams to increase the weight bearing strength while withstanding the rigors of transport from site-to-site Corner gussets reinforce structural continuity to prevent racking – even under the heaviest loads Door hinges on left, monitor on right*

Seven Standard Color Finishes

RED

BLUE

YELLOW

CANDY APPLE RED

EXTREME GREEN

GLOSS BLACK

ARCTIC SILVER

Custom Finishes Available Upon Request Utilizes Snap-on True Fit Foam**

*Monitor mounted on right so that open-door inventory audits may be performed when looking at the screen.

**Foam without silhouettes included in every locker drawer and surface to protect surfaces and to optimize reception of RFID tags

Snap-on Level 5 ATC Cabinet Dimensions

Base Tool Box configuration Height, in (cm) Width*, in (cm) Depth, in (cm) 80 (204) 40 (106) 30 (76)

Cubic Inches (cm3) Load Capacity, lb. (kg) Net Weight, lb. (kg) 32,835 (537,837) 4,000 (1,814) 517 (235)

*Width dimension includes monitor fully extended. Without monitor, width is 30 in (76 cm)

Regulatory

CE Declaration of compliance including 2014/35/EU- Low Voltage Directive 2014/30/EU- EMC Directive 2014/53/EU- Radio Equipment Directive (RED) 2011/65/EU Restriction of certain hazardous substances (RoHS) 2012/19/EU Waste Electrical and Electronic Equipment (WEEE)

IEC 62368-1: 2014

EN 62368-1: 2014

EN 55032:2015/A11:2020

EN 55035:2017/A11:2020

EN 61000-3-2: 2014

EN 61000-3-3: 2013

ETSI EN 301 489-1: 2017

ETSI EN 301 489-17: 2017

CNS-13438:2017

CSA/UL Compliance UL 62368-1/CSA C22.2 No. 62368-1, Second Edition: Audio/video, information and communication technology equipment – Part 1:

Safety requirements.

Level 5 ATC V4 Toolbox Bid Specification

4 May 2023

Snap-on Level 5 ATC Toolbox

Toolbox Features Automatic Tool Issue and Return Tool Identification Audible announcements and messages Tool Status Displays Tool Search Proximity Card Scanner for User Identification User defined work locations User Photo Display Tool box status display User adjustable functions and settings Touchscreen power off button Wired or Wireless networking Multi-Language Support

4 May 2023

Snap-on L5 Connect Admin Client

Administration Software Specific Features

L5C Admin Dashboard Tab features

ATC System Status Tools Status ATC system Alerts Top Employees with issued tools Top systems with Issued tools Recent events log

L5C Admin Locations Tab Features

Create and organize locations Manage L5C devices Create event notifications Set type of notification: Text or Email

L5C Admin Tools Tab Features Create and manage tool instances List available tool masters Define maintenance and quality monitors

L5C Admin Tool States Tab Features Real-time status updates Filters based on custom reports Exportable to excel

4 May 2023

L5C Admin Employees Tab functions

User Search by name or badge number Add/ Remove Users Set User Permissions Set User to receive Notifications

L5C Admin Groups Tab function

Group Search by name Add and Remove Groups Set Group Options and Permissions Assign a Group to a Location

L5C Admin History Tab functions View History log and archive images Apply Filters to results to narrow search

L5C Admin Reports Tab functions

Many Pre-created Reports Available Report Sorting Create Custom Reports Schedule Reports Email and Text Delivery Multi-Format (RTF, Excel, HTML, PDF)

L5C Admin Settings Tab functions

Set language preference for local admin Obtain system log files Select Local server path Software release version ATC Service machine and ports Define custom tool statuses

For further information refer to L5 Connect documentation

4 May 2023

Snap-on Level 5 ATC Toolbox Electronics

External Components Display Widescreen 13.3-inch Resistive touch Card Reader RFIdeas pcProx Plus 82 Series I/O 3x USB 3.0 Ports Data Port RJ45 Gigabit Ethernet Port

HID compatible Proximity Card Sensor:

Toolbox - RFIDEAS PN: RDR-805W2AKU Admin PC Kit - RFIDEAS PN: RDR- 80582AKU

Power Components Power Supply Sparkle Power FSP4001K31M1-SOT Power Port CORCOM 10EEJ1 UPS 30 Minutes back up power External Battery 6 Li-ion (14 hrs)

Input voltage – 100VAC - 240VAC / 4.6 – 2.3 A / 47 - 63 Hz Output voltages –300 W Max without moving air 18VDC, 16.67 A

Main System Board CPU Intel® Celeron J6412 Quad Core SoC up to 2.6GHz Burst Frequency, Elkhart Lake Platform Memory 16GB DDR4-3200 SODIMM RAM Network Intel® Wi-Fi 6E AX210 and Intel® I225-LM (2.5GbE) Gigabit Ethernet Storage Samsung 980 PCIe® 3.0 NVMe® SSD 500GB Operating System Windows 10 Enterprise LTSC 2019

Snap-on Proprietary Peripheral Control Board Ethernet Communications Hub Camera Synchronization Lock Control Power Distribution and Battery Control

Snap-on Proprietary Camera Boards 5 Megapixel color camera chip Smart Capabilities Max Resolution 2560 x 512 Frame Rate Control up to 60FPS Image Transfer via Ethernet Minimized Power Consumption Power conditioning / reset circuitry with external control Number of Cameras in unit (36” toolbox contains 4, 54” toolbox contains 6)

For the top drawer, the smallest tool to track is 3/16” dia., pressed into 1/2" thick foam. The size of the tool increases progressively from top to bottom. For the bottom drawer, the smallest tool to track is 1/2” dia., pressed into 1/2" thick foam

All electronics located more than 18” above the bottom of casters

Snap-on Level 5 ATC Mechanicals

Casing for Electronics Painted steel mounting frame fitted on top of the tool box

Finish (2 options) Stainless Steel HR steel with Chemical Resistant Polyurea coating

Physical Security Fort Lock eLatch Electromechanical Lock Module Utilizes Snap-on True fit foam 40,000 + users per box 100,000 + event audit trail.

True Fit Foam:

Standard Thickness = 1/2" Maximum Other thickness configurations by special order only Minimum hole size for 1/2" thick foam = 3/16” for top drawer Minimum hole sizes increase as foam thickness increases Minimum hole sizes increase for the lower drawers Minimum hole size in lower drawer with 1/2 “ thick foam is 1/2" Color = blue foam Plastic Backing color: yellow File for cutouts created with Snap-on proprietary design package Preferred tool orientation in foam is flat or horizontal.

Snap-on Level 5 ATC Tool Storage Dimensions

Base Tool Box configuration

36” x 29” x 41” Single column Stationary or Roll Cab Stealth casters 3 Drawer Configurations (6,7,8) 11 colors

54” x 29” x 41” Single column Stationary or Roll Cab iso-Ride #1700 casters 3 Drawer Configurations (6,7,8) 11 colors

Regulatory

CE Declaration of compliance including

2014/35/EU- Low Voltage Directive 2014/30/EU- EMC Directive 2014/53/EU- Radio Equipment Directive (RED) 2011/65/EU Restriction of certain hazardous substances (RoHS) 2012/19/EU Waste Electrical and Electronic Equipment (WEEE)

IEC 62368-1: 2014

EN 62368-1: 2014

EN 55032:2015/A11:2020

EN 55035:2017/A11:2020

EN 61000-3-2: 2014

EN 61000-3-3: 2013

ETSI EN 301 489-1: 2017

ETSI EN 301 489-17: 2017

CNS-13438:2017

CSA/UL Compliance

UL 62368-1/CSA C22.2 No. 62368-1, Second Edition: Audio/video, information and communication technology equipment – Part 1:

Safety requirements.

Snap-on L5 Connect is the premier Tool Control, Crib Management, and FOD compliance platform. Providing real-time accountability, traceability, and audit reporting. The L5 Connect system works at the speed of work. The L5 Connect ATC Toolbox and Locker come equipped with a custom embedded version of the Windows 10 operating system, allowing seamless integration into current IT environments. These ATC devices also have wired 1GB Ethernet and 802.11ax wireless capabilities. Providing support for the latest in networking technologies.

L5 Connect devices require a connection to an L5 Connect service installed on any Windows 10 computer or server. This service communicates with a Microsoft SQL 2019 Database, which stores the relevant user data of the devices. The L5 Connect Service requires a purchased license to use. Snap-on offers an Administration PC equipped with a SQL database that can be purchased for this installation.

L5 Connect is managed by an administration client providing a graphical user interface (GUI) to interact with the L5 Connect service. This administration program is a windows application that can be installed on any workstation running Windows 10. Customers can use this Administration Client to manage their users and tools and get relevant data on the use of their ATC Devices.

Both the L5 Connect Service and the Administration client are provided as downloads from Snap-on.

ATC Devices are connected via a computer network to the L5 Connect Service, allowing downloading/uploading of database and file information. The network chosen can be wired Ethernet or a wireless network. This choice is up to the customer and depends on site requirements. Many L5 Connect installations are a standalone wireless configuration consisting of a wireless router with a DHCP server built-in, the ATC Devices, and an administrative computer running L5 Connect Service.

Some customers have integrated ATC devices and the Administration Computer into their local networks (wireless or wired). The ATC Devices can be added to customer domains if required. Local security policies can be downloaded to the ATC Devices if needed.

Please consult with Snap-on ATC technical support before joining the ATC Devices to the customer domain.

Anti-virus and anti-malware software can be downloaded to the ATC Devices if required by local security policies. Please consult with Snap-on ATC technical support before installing anti-virus or anti-malware software to the ATC boxes.

Please consult with Snap-on ATC technical support for a detailed explanation of the ATC networking guidelines.

AUTOMATED TOOL CONTROL

NETWORK OVERVIEW

2. CLIN 0002 SHIPPING: DELIVERED, FOB DESTINATION TO:

LRS TMO/GROUND TRANS, B15

161ST AIR REFUELING WING

GOLDWATER AIR NATIONAL GUARD BASE

3200 E OLD TOWER RD

PHOENIX, AZ 85034-7263

WARRANTY SUPPORT