24-136-IFB_Attachment_A_-_Specifications.pdf

CARPET PREAMBLE • SECTION 1-8

329 west 18th street ste. 600 - chicago, il 60616 • ph. (312) 226-2500 • info@andersonmiller.com • page 1 of 3

PROPERTY

HYATT REGENCY ORLANDO, FL PUBLIC SPACE #21903

ISSUE DATE / REVISION DATE

ISSUE DATE: NOVEMBER 2, 2023 REVISION DATE:

1. GENERAL CONDITIONS

1.1. Refer to section 1-0 General Conditions for further information.

2. CERTIFICATES AND CODES

2.1. Flammability/Radiant panel: ASTM E-648 Class 1

2.2. Smoke density: ASTM E-662-09/NFPA 258

2.3. Lightfastness: AATCC 16-E

2.4. Color fastness to light: BS 1006/EN ISO 105B2 sunlight minimum 5, AATCC cooled Xenon light minimum 4 (additional

UV protection should be evaluated on a per project basis)

2.5. Color fastness to water: AATCC 107

2.6. Color fastness to rubbing: AATCC 165

2.7. Water resistance: ASTM D5252

2.8. Appearance retention: ASTM D5252

2.9. Tuft anchorage: ASTM D1335

2.10. Static electricity/Stroll test: AAATCC 134 < 3.0 KV

2.11. TARR (Texture Appearance Retention Rating) of 2.5 - 3.0 or higher

2.12. Green Label Plus approved through CRI

2.13. VOC: ASTM D5116, Total VOC < 0.05

2.14. Compression Recovery: BS 4098

2.15. Dynamic Load: BS 4052

2.16. Static Load: BS 4939

2.17. Tuft Bind (tufted carpet only): ASTM D-1335

3. GENERAL INFORMATION

3.1. Standard of Work: All workmanship shall be of the highest grade and shall contain all structural and artistic details exemplified by the best standard of carpet craftsmanship.

3.2. Carpet padding must be replaced at the same time as the carpet.

3.3. Printed carpet is not allowed.

3.4. Must not contain formaldehyde.

3.5. All carpet must be moth resistant.

3.6. Carpet must be first quality goods from a single dye lot in the largest roll size feasible.

4. WOVEN AXMINSTER CARPET

4.1. General Construction:

4.1.1. Wool/Nylon Blend (80/20). Wool must be woolen spun yarn. Semi-worsted is not permitted.

4.1.2. 100% Nylon must only be used in pre-approved conditions/applications. Must be 100% Solution Dyed.

4.1.3. Dye Method: Skein dyed

4.1.4. Yarn Origin: New Zealand and/or British

4.1.5. Yarn Ply: 3/40 Dewsbury

4.1.6. Pitch: 7 - 8 per inch

4.1.7. Finished Pile Height: .250 to .281

4.1.8. Primary Backing: Synthetic

4.1.9. Minimum Row Counts/Face Weights by Area:

4.1.9.1. Guestrooms: 8 row, 32 - 36 oz/sy

4.1.9.2. Corridor: 9 - 10 row, 39 - 41 oz/sy

4.1.9.3. Public Area(s), Meeting Area(s), Dining Area(s): 9 - 10 row, 39 - 41 oz/sy

5. MACHINE TUFTED/HAND TUFTED WOOL CARPETING

5.1. General Construction:

5.1.1. 100% Skein Dyed Wool

5.1.2. Weight: 72 oz. per square yard min.

5.1.3. Construction: Cut and loop

329 west 18th street ste. 600 - chicago, il 60616 • ph. (312) 226-2500 • info@andersonmiller.com • page 2 of 3

5.1.4. Backing: Jute or synthetic, or equal

5.1.5. Rows per inch: 5.5 min.

6. TUFTED BROADLOOM CARPET

6.1. General Construction:

6.1.1. 100% Solution Dyed Nylon

6.1.2. Primary Backing: Synthetic Woven Polypropylene

6.1.3. Secondary Backing: Action Bac or equal

6.1.4. Finish Pile Height: .1875” to .5”

6.1.5. Gauge: 1/10 min.

6.1.6. Stitches per inch: 10

6.1.7. Yarn twist per inch: 4 min.

6.1.8. Must be impervious to chlorine bleach.

6.1.9. All nylon carpet must be stain treated with foam/spray and heat set method.

6.1.10. All carpet must be warrantied for wear at 10 percent fiber loss over 10 years.

6.1.11. Minimum Weight by Area:

6.1.11.1. Guestrooms: 32 oz

6.1.11.2. Public Areas: 40 oz.

7. CYP

7.1. General Construction:

7.1.1. Refer to Tufted Broadloom Carpet guidelines above. All apply, except the following, which are more stringent:

7.1.1.1. Weight: 42 oz min.

7.1.1.2. Construction: Multi-level cut and loop

7.1.1.3. Pile Height: .281” average

7.1.1.4. Gauge: 1/11

7.1.1.5. Stitches per inch: 11

8. CARPET TILE

8.1. 100% Solution Dyed Nylon

8.2. Weight: 18 oz/sy min.

8.3. Primary Backing: Synthetic

8.4. Secondary Backing: Attached Cushion

8.5. Pile Height: .123” min.

8.6. Gauge: 1/10” min.

8.7. Stitches per inch: 7 min.

9. WALK-OFF MAT/CARPET

9.1. Must be suitable for high-traffic, commercial, interior vestibule conditions.

9.2. Selected walk-off mat/carpet should provide sufficient soil removal before guests enter the main flooring finish.

9.3. Must be dimensionally stable and should not shrink or curl.

9.4. Material should not absorb moisture or emit odor when wet.

9.5. Material must resist staining.

9.6. Material must be UV stabilized.

10. CARPET PAD

10.1. Guestrooms and Suites:

10.1.1. Class II, Commercial Grade

10.1.2. Synthetic fiber pad must be minimum 32 oz. weight, and 5/16” thickness.

10.1.3. 100 percent SBR rubber cushion must be a textured flat construction with a minimum 64 oz. weight.

10.1.4. Froth polyurethane cushion must be a minimum ¼” thickness.

10.1.5. Recovery after compression - 75% minimum.

10.1.6. Must include moisture barriers and antimicrobial protection.

10.2. Public Areas:

10.2.1. Class III, Commercial Grade

10.2.2. 100 percent SBR rubber must be a flat construction with a minimum ¼” thickness, 80 oz/sq. yd. minimum.

10.2.3. Recovery after compression - 75% minimum.

10.2.4. Must include moisture barriers and antimicrobial protection.

329 west 18th street ste. 600 - chicago, il 60616 • ph. (312) 226-2500 • info@andersonmiller.com • page 3 of 3

10.3. Attached cushion must be frothed polyurethane with a minimum 3/32” thickness. All attached cushion must be factory applied. A premium seam sealer must be used on all seams. A premium edge sealer must be used on all edges that abut a hard surface.

10.4. All pad specifications are to be reviewed by the contractor and installer. The installer should advise if an alternate pad is recommended for specific installations prior to purchase. Purchasing Agent to confirm all installation methods and carpet pad specifications with carpet installer prior to ordering carpet pad.

11. INSTALLATION:

11.1. Refer to architectural finish plans for carpet locations. CAD plans can be provided to carpet manufacturers and carpet installers upon request.

11.2. All carpet installed over padding must be power stretched, except in glue-down installations.

11.3. Maximum of one seam allowed in each guestroom. Seaming diagrams should be provided for confirmation.

11.4. In general, Guestroom carpet installation method to be stretch-in. 2” commercial tackless strips to be used.

11.5. In general, Public Area carpet installation method to be double glue down/direct glue. Heat melt tape seam sealer to be used.

11.6. Please note the above are recommendations. Each carpet type and carpet installation should be reviewed individually with the contractor/installer to determine the appropriate installation method for each carpet type. All parties should be in agreement prior to execution of installation.

12. QUANTITIES:

12.1. Carpet installer must verify all quantities prior to the Purchasing Agent placing all carpet orders.

13. SUBMITTALS:

13.1. Carpet manufacturer(s) must provide all appropriate submittals, samples, strike-offs, seaming diagrams, etc. to AML for approval prior to the production of all carpet designs, regardless of construction. Running line or stocked carpet requires a sample sign off prior to shipment of the selected product. Carpet manufacturer(s) to coordinate with PA and AML that they have sent all appropriate information to the designer prior to producing and/or shipping the specified carpet(s).

END PREAMBLE

AML #21903 Schedule

3 2 9 w. 1 8 t h s t . s t e . 6 0 0 c h i c a g o , i l 6 0 6 1 6 p h . ( 3 1 2 ) 2 2 6 - 2 5 0 0 i n f o@ande rsonm i l l e r . com

PROPERTY: Hyatt Regency Orlando Airport AREA: Public Space DATE: November 2, 2023

REVISION # DATE:

√ ITEM QUANTITY DESCRIPTION UNIT COST TOTAL COST

CARPET

CPT-1 TBD Carpet @ Lobby and Lobby Flow

CPT-1A TBD Carpet Pad @ Lobby and Lobby Flow

CPT-2 TBD Carpet @ Bar

CPT-2A TBD Carpet Pad @ Bar

CPT-3 TBD Carpet @ Briefing Room

CPT-3A TBD Carpet Pad @ Briefing Room

CPT-4 TBD Carpet @ Ballroom

CPT-4A TBD Carpet Pad @ Ballroom

CPT-5 TBD Carpet @ Briefing Room Prefunction

CPT-5A TBD Carpet Pad @ Briefing Room Prefunction

Vendor responsible for all takeoffs.

****END CARPET****

3 2 9 w. 1 8 t h s t . s t e . 6 0 0 c h i c a g o , i l 6 0 6 1 6 p h . ( 3 1 2 ) 2 2 6 - 2 5 0 0 i n f o@ande rsonm i l l e r . com

HYATT REGENCY ORLANDO AIRPORT – #21903 Specification

ITEM: Carpet @ Lobby and Lobby Flow REFERENCE NUMBER: CPT-1

QUANTITY: TBD (See Exhibits) DETAIL NUMBER: CPT-1X

AREA: Public Space REVISION NUMBER:

ISSUE DATE: November 2, 2023 REVISION DATE:

SOURCE: To Bid

INSTRUCTIONS: TAG/LABEL-REFERENCE NUMBER, ITEM, QUANTITY and AREA.

DESCRIPTION Carpet @ Lobby and Lobby Flow

1. Manufacturer: To Bid

2. Pattern: Custom – To be developed with AML. Based on pattern inspiration provided.

3. Colors: TBD – up to 24 color poms, but no less than 16. Vendor to confirm capacity.

4. Construction: Woven Axminister

5. Rows: 10 Pitch: 7 per inch

6. Fiber: 80% Wool, 20% Nylon

7. Pattern Repeat: Approx. 25’-0” W x 50’-0” L. Note: Designer may be open to minor scale changes in repeat to maximize loom size.

8. Pile Weight: 1500 gm/sm or 42.2 oz/sy. Manufacturer to advise if varies.

9. Pile Height: 6.4mm / 0.250 inch. Manufacturer to advise if varies.

10. Backing: Polyester/ Polypropylene. Manufacturer to advise if varies.

11. Installation: Double-Stick, Tred-Mor or Equal.

12. Carpet must meet the standards for the Carpet & Rug Institute’s Indoor Air Quality Green Label Carpet Testing Program.

13. Must be contract quality. Must pass ASTM E-648 Class 1

14. Contractor to verify all yardage requirements and full scale sims.

15. Vendor to advise loom size and maximize efficiency for the least amount of waste.

16. Vendor to include site visit to field verify conditions.

17. Warranty: Minimum of 2 years.

18. Manufacturer must submit strike-off sample for AML review & approval prior to production.

19. Manufacturer to coordinate all details of specified item(s) with AML prior to production.

20. Refer to CPT-1A for carpet pad information.

21. Refer to CPT-1X for detail.

Notes:

● Vendor/Manufacturer responsible for reviewing specification(s) fully and carefully prior to submitting pricing quotation to any involved party (Anderson/Miller, Ltd., Purchasing Agent, Ownership, etc.) Vendor/Manufacturer to submit any/all questions, concerns, comments, suggestions, substitutions, changes, etc. in writing to AML prior to submitting quotation.

Vendor/Manufacturer must notify AML and Purchasing Agent in writing of any quoted deviations from AML specification(s).

● Must be contract quality.

● Refer to finish plan and schedule in construction documents for carpet locations.

● Installer to verify yardage requirements prior to carpet order being placed.

● Refer to the carpet preamble and general conditions for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items. Purchasing agent to supply preambles with specification when bidding out and pricing job. It is the manufacturer’s responsibility to review and guarantee compliance. It is the Vendor/ Manufacturer’s responsibility to request from the Purchasing Agent if not received.

● Vendor/Manufacturer must submit detailed shop drawings, seaming diagrams and all strike-off samples to AML for review and approval prior to production. If the Vendor/Manufacturer moves forward with the production of any items without such approvals, the Vendor/Manufacturer is solely responsible for remaking/adjusting anything that was done/completed without AML’s written approval.

● Vendor/Manufacturer to coordinate all details of specified items with AML prior to production. Refer to drawings and/or included imagery for additional information.

● Vendor/Manufacturer to coordinate installation instructions with AML on shop drawings. GC and FF&E installer to refer to approved manufacturer’s shop drawings for more information.

Refer to FF&E plans for placement. Ensure pieces will fit on/in necessary elevators, corridors, doorways, etc. Coordinate all dimensions with AML prior to production.

● All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only. Do not use items as a final submittal.

● Anderson/Miller, Ltd. retains ownership of the worldwide copyright, patent and/or trademark and all other intellectual property rights whatsoever in all products and materials designed by

AML.

32 9 w. 18 t h s t . s t e . 6 00 c h i cag o , i l 6061 6 ph . (31 2 ) 2 26 -2500 i n fo@ande rsonmi l l e r . com

TITLE__________________________________

NO_____________ DATE__________________

REV NO_________ REV DATE______________

Pattern Inspiration

Carpet @ Lobby and Lobby Flow

CPT-1X 11/02/2023

HYATT REGENCY ORLANDO AIRPORT – #21903

3 2 9 w. 1 8 t h s t . s t e . 6 0 0 c h i c a g o , i l 6 0 6 1 6 p h . ( 3 1 2 ) 2 2 6 - 2 5 0 0 i n f o@ande rsonm i l l e r . com

HYATT REGENCY ORLANDO AIRPORT – #21903 Specification

ITEM: Carpet Pad @ Lobby and Lobby Flow REFERENCE NUMBER: CPT-1A

QUANTITY: TBD DETAIL NUMBER:

AREA: Public Space REVISION NUMBER:

ISSUE DATE: November 2, 2023 REVISION DATE:

SOURCE: Andrew Bell Leggett & Platt

Email:

Phone:

andrewbell@leggett.com (847)-626-5531

DESCRIPTION Carpet Pad @ Lobby and Lobby Flow

Dimensions: 54” W x 60’ L per roll

1. Manufacturer: Sponge Cushion Inc.

2. Style: TredMOR BV0180 Dbl-Stick 2580

3. Description: Carpet Pad

4. Content: 100% Styrene Rubber cushion

5. Width: Roll – 4’-6” W x 60’-0” L

6. Thickness: 0.25”

7. Weight: 80 oz.

8. Finish: Guardian Antimicrobial

9. Ratings: Pill Test (DOC-FF, 1-70)

10. Color: Black

11. Backing Top: Poly-tek

12. Backing Bottom: Spun bonded

13. Content: 100% Synthetic Rubber

14. Warranty: Commercial: Limited-Life of Carpet

15. Installation: Per manufacturer’s specification and recommendations. Must use Tred-Mor adhesive.

16. Must pass all state and local fire codes.

17. Must be contract quality.

18. Contractor to verify all yardage requirements.

19. Refer to CPT-1 for all carpet information.

● Vendor/Manufacturer responsible for reviewing specification(s) fully and carefully prior to submitting pricing quotation to any involved party (Anderson/Miller, Ltd., Purchasing Agent, Ownership, etc.) Vendor/Manufacturer to submit any/all questions, concerns, comments, suggestions, substitutions, changes, etc. in writing to AML prior to submitting quotation.

Vendor/Manufacturer must notify AML and Purchasing Agent in writing of any quoted deviations from AML specification(s).

● Must be contract quality.

● Refer to finish plan and schedule in construction documents for carpet locations.

● Installer to verify yardage requirements prior to carpet pad order being placed.

● Refer to the carpet preamble and general conditions for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items. Purchasing agent to supply preambles with specification when bidding out and pricing job. It is the manufacturer’s responsibility to review and guarantee compliance. It is the Vendor/ Manufacturer’s responsibility to request from the Purchasing Agent if not received.

● Vendor/Manufacturer to coordinate all details of specified items with AML prior to production. Refer to drawings and/or included imagery for additional information.

● All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only. Do not use items as a final submittal.

● Anderson/Miller, Ltd. retains ownership of the worldwide copyright, patent and/or trademark and all other intellectual property rights whatsoever in all products and materials designed by

3 2 9 w. 1 8 t h s t . s t e . 6 0 0 c h i c a g o , i l 6 0 6 1 6 p h . ( 3 1 2 ) 2 2 6 - 2 5 0 0 i n f o@ande rsonm i l l e r . com

HYATT REGENCY ORLANDO AIRPORT – #21903 Specification

ITEM: Carpet @ Bar REFERENCE NUMBER: CPT-2

QUANTITY: TBD (See Exhibits) DETAIL NUMBER: CPT-2X

AREA: Public Space REVISION NUMBER:

ISSUE DATE: November 2, 2023 REVISION DATE:

SOURCE: To Bid

DESCRIPTION Carpet @ Bar

3. Colors: TBD – up to 24 color poms, but no less than 16. Vendor to confirm capacity.

4. Construction: Woven Axminister

5. Rows: 10 Pitch: 7 per inch

6. Fiber: 80% Wool, 20% Nylon

7. Pattern Repeat: Approx. 20’-0 W x 18”-0” L. Note: Designer may be open to minor scale changes in repeat to maximize loom size.

8. Pile Weight: 1500 gm/sm or 42.2 oz/sy. Manufacturer to advise if varies.

9. Pile Height: 6.4mm / 0.250 inch. Manufacturer to advise if varies.

10. Backing: Polyester/ Polypropylene. Manufacturer to advise if varies.

11. Installation: Double-Stick, Tred-Mor or Equal.

12. Carpet must meet the standards for the Carpet & Rug Institute’s Indoor Air Quality Green Label Carpet Testing Program.

13. Must be contract quality. Must pass ASTM E-648 Class 1

14. Contractor to verify all yardage requirements and full scale sims.

15. Vendor to advise loom size and maximize efficiency for the least amount of waste.

16. Vendor to include site visit to field verify conditions

17. Warranty: Minimum of 2 years.

18. Manufacturer must submit strike-off sample for AML review & approval prior to production.

19. Manufacturer to coordinate all details of specified item(s) with AML prior to production.

20. Refer to CPT-2A for carpet pad information.

21. Refer to CPT-2X for detail.

● Vendor/Manufacturer responsible for reviewing specification(s) fully and carefully prior to submitting pricing quotation to any involved party (Anderson/Miller, Ltd., Purchasing Agent, Ownership, etc.) Vendor/Manufacturer to submit any/all questions, concerns, comments, suggestions, substitutions, changes, etc. in writing to AML prior to submitting quotation.

Vendor/Manufacturer must notify AML and Purchasing Agent in writing of any quoted deviations from AML specification(s).

● Must be contract quality.

● Refer to finish plan and schedule in construction documents for carpet locations.

● Installer to verify yardage requirements prior to carpet order being placed.

● Refer to the carpet preamble and general conditions for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items. Purchasing agent to supply preambles with specification when bidding out and pricing job. It is the manufacturer’s responsibility to review and guarantee compliance. It is the Vendor/ Manufacturer’s responsibility to request from the Purchasing Agent if not received.

● Vendor/Manufacturer must submit detailed shop drawings, seaming diagrams and all strike-off samples to AML for review and approval prior to production. If the Vendor/Manufacturer moves forward with the production of any items without such approvals, the Vendor/Manufacturer is solely responsible for remaking/adjusting anything that was done/completed without AML’s written approval.

● Vendor/Manufacturer to coordinate all details of specified items with AML prior to production. Refer to drawings and/or included imagery for additional information.

● Vendor/Manufacturer to coordinate installation instructions with AML on shop drawings. GC and FF&E installer to refer to approved manufacturer’s shop drawings for more information.

Refer to FF&E plans for placement. Ensure pieces will fit on/in necessary elevators, corridors, doorways, etc. Coordinate all dimensions with AML prior to production.

● All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only. Do not use items as a final submittal.

● Anderson/Miller, Ltd. retains ownership of the worldwide copyright, patent and/or trademark and all other intellectual property rights whatsoever in all products and materials designed by

32 9 w. 18 t h s t . s t e . 6 00 c h i cag o , i l 6061 6 ph . (31 2 ) 2 26 -2500 i n fo@ande rsonmi l l e r . com

NO_____________ DATE__________________

TBD

CUSTOM PATTERN

DESIGN TO BE

DEVELOPED WITH

CARPET VENDOR

Carpet @ Bar

CPT-2X 11/02/2023

3 2 9 w. 1 8 t h s t . s t e . 6 0 0 c h i c a g o , i l 6 0 6 1 6 p h . ( 3 1 2 ) 2 2 6 - 2 5 0 0 i n f o@ande rsonm i l l e r . com

HYATT REGENCY ORLANDO AIRPORT – #21903 Specification

ITEM: Carpet Pad @ Bar REFERENCE NUMBER: CPT-2A

QUANTITY: TBD DETAIL NUMBER:

AREA: Public Space REVISION NUMBER:

ISSUE DATE: November 2, 2023 REVISION DATE:

SOURCE: Andrew Bell Leggett & Platt

Email:

Phone:

DESCRIPTION Carpet Pad @ Bar

Dimensions: 54” W x 60’ L per roll

1. Manufacturer: Sponge Cushion Inc.

2. Style: TredMOR BV0180 Dbl-Stick 2580

3. Description: Carpet Pad

4. Content: 100% Styrene Rubber cushion

5. Width: Roll – 4’-6” W x 60’-0” L

6. Thickness: 0.25”

7. Weight: 80 oz.

8. Finish: Guardian Antimicrobial

9. Ratings: Pill Test (DOC-FF, 1-70)

10. Color: Black

11. Backing Top: Poly-tek

12. Backing Bottom: Spun bonded

13. Content: 100% Synthetic Rubber

14. Warranty: Commercial: Limited-Life of Carpet

15. Installation: Per manufacturer’s specification and recommendations. Must use Tred-Mor adhesive.

16. Must pass all state and local fire codes.

17. Must be contract quality.

19. Refer to CPT-2 for all carpet information.

● Vendor/Manufacturer responsible for reviewing specification(s) fully and carefully prior to submitting pricing quotation to any involved party (Anderson/Miller, Ltd., Purchasing Agent, Ownership, etc.) Vendor/Manufacturer to submit any/all questions, concerns, comments, suggestions, substitutions, changes, etc. in writing to AML prior to submitting quotation.

Vendor/Manufacturer must notify AML and Purchasing Agent in writing of any quoted deviations from AML specification(s).

● Must be contract quality.

● Refer to finish plan and schedule in construction documents for carpet locations.

● Installer to verify yardage requirements prior to carpet pad order being placed.

● Refer to the carpet preamble and general conditions for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items. Purchasing agent to supply preambles with specification when bidding out and pricing job. It is the manufacturer’s responsibility to review and guarantee compliance. It is the Vendor/ Manufacturer’s responsibility to request from the Purchasing Agent if not received.

● Vendor/Manufacturer to coordinate all details of specified items with AML prior to production. Refer to drawings and/or included imagery for additional information.

● All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only. Do not use items as a final submittal.

● Anderson/Miller, Ltd. retains ownership of the worldwide copyright, patent and/or trademark and all other intellectual property rights whatsoever in all products and materials designed by

3 2 9 w. 1 8 t h s t . s t e . 6 0 0 c h i c a g o , i l 6 0 6 1 6 p h . ( 3 1 2 ) 2 2 6 - 2 5 0 0 i n f o@ande rsonm i l l e r . com

HYATT REGENCY ORLANDO AIRPORT – #21903 Specification

ITEM: Carpet @ Briefing Room REFERENCE NUMBER: CPT-3

QUANTITY: TBD (See Exhibits) DETAIL NUMBER: CPT-3X

AREA: Public Space REVISION NUMBER:

ISSUE DATE: November 2, 2023 REVISION DATE:

SOURCE: To Bid

DESCRIPTION Carpet @ Briefing Room

3. Colors: TBD – up to 24 color poms, but no less than 16. Vendor to confirm capacity.

4. Construction: Woven Axminister

5. Rows: 10 Pitch: 7 per inch

6. Fiber: 80% Wool, 20% Nylon

7. Pattern Repeat: Approx. 70’-0” W x 52’-0” L. Note: Designer may be open to minor scale changes in repeat to maximize loom size.

8. Pile Weight: 1500 gm/sm or 42.2 oz/sy. Manufacturer to advise if varies.

9. Pile Height: 6.4mm / 0.250 inch. Manufacturer to advise if varies.

10. Backing: Polyester/ Polypropylene. Manufacturer to advise if varies.

11. Installation: Double-Stick, Tred-Mor or Equal.

12. Carpet must meet the standards for the Carpet & Rug Institute’s Indoor Air Quality Green Label Carpet Testing Program.

13. Must be contract quality. Must pass ASTM E-648 Class 1

14. Contractor to verify all yardage requirements and full scale sims.

15. Vendor to advise loom size and maximize efficiency for the least amount of waste.

16. Vendor to include site visit to field verify conditions.

17. Warranty: Minimum of 2 years.

18. Manufacturer must submit strike-off sample for AML review & approval prior to production.

19. Manufacturer to coordinate all details of specified item(s) with AML prior to production.

20. Refer to CPT-3A for carpet pad information.

21. Refer to CPT-3X for detail.

● Vendor/Manufacturer responsible for reviewing specification(s) fully and carefully prior to submitting pricing quotation to any involved party (Anderson/Miller, Ltd., Purchasing Agent, Ownership, etc.) Vendor/Manufacturer to submit any/all questions, concerns, comments, suggestions, substitutions, changes, etc. in writing to AML prior to submitting quotation.

Vendor/Manufacturer must notify AML and Purchasing Agent in writing of any quoted deviations from AML specification(s).

● Must be contract quality.

● Refer to finish plan and schedule in construction documents for carpet locations.

● Installer to verify yardage requirements prior to carpet order being placed.

● Refer to the carpet preamble and general conditions for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items. Purchasing agent to supply preambles with specification when bidding out and pricing job. It is the manufacturer’s responsibility to review and guarantee compliance. It is the Vendor/ Manufacturer’s responsibility to request from the Purchasing Agent if not received.

● Vendor/Manufacturer must submit detailed shop drawings, seaming diagrams and all strike-off samples to AML for review and approval prior to production. If the Vendor/Manufacturer moves forward with the production of any items without such approvals, the Vendor/Manufacturer is solely responsible for remaking/adjusting anything that was done/completed without AML’s written approval.

● Vendor/Manufacturer to coordinate all details of specified items with AML prior to production. Refer to drawings and/or included imagery for additional information.

● Vendor/Manufacturer to coordinate installation instructions with AML on shop drawings. GC and FF&E installer to refer to approved manufacturer’s shop drawings for more information.

Refer to FF&E plans for placement. Ensure pieces will fit on/in necessary elevators, corridors, doorways, etc. Coordinate all dimensions with AML prior to production.

● All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only. Do not use items as a final submittal.

● Anderson/Miller, Ltd. retains ownership of the worldwide copyright, patent and/or trademark and all other intellectual property rights whatsoever in all products and materials designed by

32 9 w. 18 t h s t . s t e . 6 00 c h i cag o , i l 6061 6 ph . (31 2 ) 2 26 -2500 i n fo@ande rsonmi l l e r . com

NO_____________ DATE__________________

TBD

CUSTOM PATTERN

DESIGN TO BE

DEVELOPED WITH

CARPET VENDOR

Carpet @ Briefing Room

CPT-3X 11/02/2023

3 2 9 w. 1 8 t h s t . s t e . 6 0 0 c h i c a g o , i l 6 0 6 1 6 p h . ( 3 1 2 ) 2 2 6 - 2 5 0 0 i n f o@ande rsonm i l l e r . com

HYATT REGENCY ORLANDO AIRPORT – #21903 Specification

ITEM: Carpet Pad @ Briefing Room REFERENCE NUMBER: CPT-3A

QUANTITY: TBD DETAIL NUMBER:

AREA: Public Space REVISION NUMBER:

ISSUE DATE: November 2, 2023 REVISION DATE:

SOURCE: Andrew Bell Leggett & Platt

Email:

Phone:

DESCRIPTION Carpet Pad @ Briefing Room

Dimensions: 54” W x 60’ L per roll

1. Manufacturer: Sponge Cushion Inc.

2. Style: TredMOR BV0180 Dbl-Stick 2580

3. Description: Carpet Pad

4. Content: 100% Styrene Rubber cushion

5. Width: Roll – 4’-6” W x 60’-0” L

6. Thickness: 0.25”

7. Weight: 80 oz.

8. Finish: Guardian Antimicrobial

9. Ratings: Pill Test (DOC-FF, 1-70)

10. Color: Black

11. Backing Top: Poly-tek

12. Backing Bottom: Spun bonded

13. Content: 100% Synthetic Rubber

14. Warranty: Commercial: Limited-Life of Carpet

15. Installation: Per manufacturer’s specification and recommendations. Must use Tred-Mor adhesive.

16. Must pass all state and local fire codes.

17. Must be contract quality.

19. Refer to CPT-3 for all carpet information.

● Vendor/Manufacturer responsible for reviewing specification(s) fully and carefully prior to submitting pricing quotation to any involved party (Anderson/Miller, Ltd., Purchasing Agent, Ownership, etc.) Vendor/Manufacturer to submit any/all questions, concerns, comments, suggestions, substitutions, changes, etc. in writing to AML prior to submitting quotation.

Vendor/Manufacturer must notify AML and Purchasing Agent in writing of any quoted deviations from AML specification(s).

● Must be contract quality.

● Refer to finish plan and schedule in construction documents for carpet locations.

● Installer to verify yardage requirements prior to carpet pad order being placed.

● Refer to the carpet preamble and general conditions for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items. Purchasing agent to supply preambles with specification when bidding out and pricing job. It is the manufacturer’s responsibility to review and guarantee compliance. It is the Vendor/ Manufacturer’s responsibility to request from the Purchasing Agent if not received.

● Vendor/Manufacturer to coordinate all details of specified items with AML prior to production. Refer to drawings and/or included imagery for additional information.

● All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only. Do not use items as a final submittal.

● Anderson/Miller, Ltd. retains ownership of the worldwide copyright, patent and/or trademark and all other intellectual property rights whatsoever in all products and materials designed by

3 2 9 w. 1 8 t h s t . s t e . 6 0 0 c h i c a g o , i l 6 0 6 1 6 p h . ( 3 1 2 ) 2 2 6 - 2 5 0 0 i n f o@ande rsonm i l l e r . com

HYATT REGENCY ORLANDO AIRPORT – #21903 Specification

ITEM: Carpet @ Ballroom REFERENCE NUMBER: CPT-4

QUANTITY: TBD (See Exhibits) DETAIL NUMBER: CPT-4X

AREA: Public Space REVISION NUMBER:

ISSUE DATE: November 2, 2023 REVISION DATE:

SOURCE: To Bid

DESCRIPTION Carpet @ Ballroom

3. Colors: TBD – up to 24 color poms, but no less than 16. Vendor to confirm capacity.

4. Construction: Woven Axminister, EJ

5. Rows: 10 Pitch: 7 per inch

6. Fiber: 80% Wool, 20% Nylon

7. Pattern Repeat: See flooded plan for Electronic Jacquard construction

8. Pile Weight: 1500 gm/sm or 42.2 oz/sy. Manufacturer to advise if varies.

9. Pile Height: 6.4mm / 0.250 inch. Manufacturer to advise if varies.

10. Backing: Polyester/ Polypropylene. Manufacturer to advise if varies.

11. Installation: Double-Stick, Tred-Mor or Equal.

12. Carpet must meet the standards for the Carpet & Rug Institute’s Indoor Air Quality Green Label Carpet Testing Program.

13. Must be contract quality. Must pass ASTM E-648 Class 1

14. Contractor to verify all yardage requirements and full scale sims.

15. Vendor to advise loom size and maximize efficiency for the least amount of waste.

16. Vendor to include site visit to field verify conditions.

17. Warranty: Minimum of 2 years.

18. Manufacturer must submit strike-off sample for AML review & approval prior to production.

19. Manufacturer to coordinate all details of specified item(s) with AML prior to production.

20. Refer to CPT-4A for carpet pad information.

21. Refer to CPT-4X for detail.

● Vendor/Manufacturer responsible for reviewing specification(s) fully and carefully prior to submitting pricing quotation to any involved party (Anderson/Miller, Ltd., Purchasing Agent, Ownership, etc.) Vendor/Manufacturer to submit any/all questions, concerns, comments, suggestions, substitutions, changes, etc. in writing to AML prior to submitting quotation.

Vendor/Manufacturer must notify AML and Purchasing Agent in writing of any quoted deviations from AML specification(s).

● Must be contract quality.

● Refer to finish plan and schedule in construction documents for carpet locations.

● Installer to verify yardage requirements prior to carpet order being placed.

● Refer to the carpet preamble and general conditions for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items. Purchasing agent to supply preambles with specification when bidding out and pricing job. It is the manufacturer’s responsibility to review and guarantee compliance. It is the Vendor/ Manufacturer’s responsibility to request from the Purchasing Agent if not received.

● Vendor/Manufacturer must submit detailed shop drawings, seaming diagrams and all strike-off samples to AML for review and approval prior to production. If the Vendor/Manufacturer moves forward with the production of any items without such approvals, the Vendor/Manufacturer is solely responsible for remaking/adjusting anything that was done/completed without AML’s written approval.

● Vendor/Manufacturer to coordinate all details of specified items with AML prior to production. Refer to drawings and/or included imagery for additional information.

● Vendor/Manufacturer to coordinate installation instructions with AML on shop drawings. GC and FF&E installer to refer to approved manufacturer’s shop drawings for more information.

Refer to FF&E plans for placement. Ensure pieces will fit on/in necessary elevators, corridors, doorways, etc. Coordinate all dimensions with AML prior to production.

● All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only. Do not use items as a final submittal.

● Anderson/Miller, Ltd. retains ownership of the worldwide copyright, patent and/or trademark and all other intellectual property rights whatsoever in all products and materials designed by

32 9 w. 18 t h s t . s t e . 6 00 c h i cag o , i l 6061 6 ph . (31 2 ) 2 26 -2500 i n fo@ande rsonmi l l e r . com

NO_____________ DATE__________________

REV NO_________ REV DATE______________

Pattern Inspiration Pattern to be EJ

Option 1 Option 2

Note: Pattern identical in both options. Designer exploring application of added color in option 2. Only one design will be produced.

Carpet @ Ballroom

CPT-4X 11/02/2023

3 2 9 w. 1 8 t h s t . s t e . 6 0 0 c h i c a g o , i l 6 0 6 1 6 p h . ( 3 1 2 ) 2 2 6 - 2 5 0 0 i n f o@ande rsonm i l l e r . com

HYATT REGENCY ORLANDO AIRPORT – #21903 Specification

ITEM: Carpet Pad @ Ballroom REFERENCE NUMBER: CPT-4A

QUANTITY: TBD DETAIL NUMBER:

AREA: Public Space REVISION NUMBER:

ISSUE DATE: November 2, 2023 REVISION DATE:

SOURCE: Andrew Bell Leggett & Platt

Email:

Phone:

DESCRIPTION Carpet Pad @ Ballroom

Dimensions: 54” W x 60’ L per roll

1. Manufacturer: Sponge Cushion Inc.

2. Style: TredMOR BV0180 Dbl-Stick 2580

3. Description: Carpet Pad

4. Content: 100% Styrene Rubber cushion

5. Width: Roll – 4’-6” W x 60’-0” L

6. Thickness: 0.25”

7. Weight: 80 oz.

8. Finish: Guardian Antimicrobial

9. Ratings: Pill Test (DOC-FF, 1-70)

10. Color: Black

11. Backing Top: Poly-tek

12. Backing Bottom: Spun bonded

13. Content: 100% Synthetic Rubber

14. Warranty: Commercial: Limited-Life of Carpet

15. Installation: Per manufacturer’s specification and recommendations. Must use Tred-Mor adhesive.

16. Must pass all state and local fire codes.

17. Must be contract quality.

19. Refer to CPT-4 for all carpet information.

● Vendor/Manufacturer responsible for reviewing specification(s) fully and carefully prior to submitting pricing quotation to any involved party (Anderson/Miller, Ltd., Purchasing Agent, Ownership, etc.) Vendor/Manufacturer to submit any/all questions, concerns, comments, suggestions, substitutions, changes, etc. in writing to AML prior to submitting quotation.

Vendor/Manufacturer must notify AML and Purchasing Agent in writing of any quoted deviations from AML specification(s).

● Must be contract quality.

● Refer to finish plan and schedule in construction documents for carpet locations.

● Installer to verify yardage requirements prior to carpet pad order being placed.

● Refer to the carpet preamble and general conditions for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items. Purchasing agent to supply preambles with specification when bidding out and pricing job. It is the manufacturer’s responsibility to review and guarantee compliance. It is the Vendor/ Manufacturer’s responsibility to request from the Purchasing Agent if not received.

● Vendor/Manufacturer to coordinate all details of specified items with AML prior to production. Refer to drawings and/or included imagery for additional information.

● All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only. Do not use items as a final submittal.

● Anderson/Miller, Ltd. retains ownership of the worldwide copyright, patent and/or trademark and all other intellectual property rights whatsoever in all products and materials designed by

3 2 9 w. 1 8 t h s t . s t e . 6 0 0 c h i c a g o , i l 6 0 6 1 6 p h . ( 3 1 2 ) 2 2 6 - 2 5 0 0 i n f o@ande rsonm i l l e r . com

HYATT REGENCY ORLANDO AIRPORT – #21903 Specification

ITEM: Carpet @ Briefing Room Prefunction REFERENCE NUMBER: CPT-5

QUANTITY: TBD (See Exhibits) DETAIL NUMBER: CPT-5X

AREA: Public Space REVISION NUMBER:

ISSUE DATE: November 2, 2023 REVISION DATE:

SOURCE: To Bid

DESCRIPTION Carpet @ Briefing Room Prefunction

3. Colors: TBD – up to 24 color poms, but no less than 16. Vendor to confirm capacity.

4. Construction: Woven Axminister, EJ

5. Rows: 10 Pitch: 7 per inch

6. Fiber: 80% Wool, 20% Nylon

7. Pattern Repeat: See flooded plan Electronic Jacquard Construction.

8. Pile Weight: 1500 gm/sm or 42.2 oz/sy. Manufacturer to advise if varies.

9. Pile Height: 6.4mm / 0.250 inch. Manufacturer to advise if varies.

10. Backing: Polyester/ Polypropylene. Manufacturer to advise if varies.

11. Installation: Double-Stick, Tred-Mor or Equal.

12. Carpet must meet the standards for the Carpet & Rug Institute’s Indoor Air Quality Green Label Carpet Testing Program.

13. Must be contract quality. Must pass ASTM E-648 Class 1

14. Contractor to verify all yardage requirements and full scale sims.

15. Vendor to advise loom size and maximize efficiency for the least amount of waste.

16. Vendor to include site visit to field verify conditions.

17. Warranty: Minimum of 2 years.

18. Manufacturer must submit strike-off sample for AML review & approval prior to production.

19. Manufacturer to coordinate all details of specified item(s) with AML prior to production.

20. Refer to CPT-5A for carpet pad information.

21. Refer to CPT-5X for detail.

● Vendor/Manufacturer responsible for reviewing specification(s) fully and carefully prior to submitting pricing quotation to any involved party (Anderson/Miller, Ltd., Purchasing Agent, Ownership, etc.) Vendor/Manufacturer to submit any/all questions, concerns, comments, suggestions, substitutions, changes, etc. in writing to AML prior to submitting quotation.

Vendor/Manufacturer must notify AML and Purchasing Agent in writing of any quoted deviations from AML specification(s).

● Must be contract quality.

● Refer to finish plan and schedule in construction documents for carpet locations.

● Installer to verify yardage requirements prior to carpet order being placed.

● Refer to the carpet preamble and general conditions for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items. Purchasing agent to supply preambles with specification when bidding out and pricing job. It is the manufacturer’s responsibility to review and guarantee compliance. It is the Vendor/ Manufacturer’s responsibility to request from the Purchasing Agent if not received.

● Vendor/Manufacturer must submit detailed shop drawings, seaming diagrams and all strike-off samples to AML for review and approval prior to production. If the Vendor/Manufacturer moves forward with the production of any items without such approvals, the Vendor/Manufacturer is solely responsible for remaking/adjusting anything that was done/completed without AML’s written approval.

● Vendor/Manufacturer to coordinate all details of specified items with AML prior to production. Refer to drawings and/or included imagery for additional information.

● Vendor/Manufacturer to coordinate installation instructions with AML on shop drawings. GC and FF&E installer to refer to approved manufacturer’s shop drawings for more information.

Refer to FF&E plans for placement. Ensure pieces will fit on/in necessary elevators, corridors, doorways, etc. Coordinate all dimensions with AML prior to production.

● All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only. Do not use items as a final submittal.

● Anderson/Miller, Ltd. retains ownership of the worldwide copyright, patent and/or trademark and all other intellectual property rights whatsoever in all products and materials designed by

32 9 w. 18 t h s t . s t e . 6 00 c h i cag o , i l 6061 6 ph . (31 2 ) 2 26 -2500 i n fo@ande rsonmi l l e r . com

NO_____________ DATE__________________

REV NO_________ REV DATE______________

Pattern to be EJ

Carpet @ Briefing Room Prefunction

CPT-5X 11/02/2023

3 2 9 w. 1 8 t h s t . s t e . 6 0 0 c h i c a g o , i l 6 0 6 1 6 p h . ( 3 1 2 ) 2 2 6 - 2 5 0 0 i n f o@ande rsonm i l l e r . com

HYATT REGENCY ORLANDO AIRPORT – #21903 Specification

ITEM: Carpet Pad @ Briefing Room Prefunction REFERENCE NUMBER: CPT-5A

QUANTITY: TBD DETAIL NUMBER:

AREA: Public Space REVISION NUMBER:

ISSUE DATE: November 2, 2023 REVISION DATE:

SOURCE: Andrew Bell Leggett & Platt

Email:

Phone:

DESCRIPTION Carpet Pad @ Briefing Room Prefunction

Dimensions: 54” W x 60’ L per roll

1. Manufacturer: Sponge Cushion Inc.

2. Style: TredMOR BV0180 Dbl-Stick 2580

3. Description: Carpet Pad

4. Content: 100% Styrene Rubber cushion

5. Width: Roll – 4’-6” W x 60’-0” L

6. Thickness: 0.25”

7. Weight: 80 oz.

8. Finish: Guardian Antimicrobial

9. Ratings: Pill Test (DOC-FF, 1-70)

10. Color: Black

11. Backing Top: Poly-tek

12. Backing Bottom: Spun bonded

13. Content: 100% Synthetic Rubber

14. Warranty: Commercial: Limited-Life of Carpet

15. Installation: Per manufacturer’s specification and recommendations. Must use Tred-Mor adhesive.

16. Must pass all state and local fire codes.

17. Must be contract quality.

19. Refer to CPT-5 for all carpet information.

● Vendor/Manufacturer responsible for reviewing specification(s) fully and carefully prior to submitting pricing quotation to any involved party (Anderson/Miller, Ltd., Purchasing Agent, Ownership, etc.) Vendor/Manufacturer to submit any/all questions, concerns, comments, suggestions, substitutions, changes, etc. in writing to AML prior to submitting quotation.

Vendor/Manufacturer must notify AML and Purchasing Agent in writing of any quoted deviations from AML specification(s).

● Must be contract quality.

● Refer to finish plan and schedule in construction documents for carpet locations.

● Installer to verify yardage requirements prior to carpet pad order being placed.

● Refer to the carpet preamble and general conditions for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items. Purchasing agent to supply preambles with specification when bidding out and pricing job. It is the manufacturer’s responsibility to review and guarantee compliance. It is the Vendor/ Manufacturer’s responsibility to request from the Purchasing Agent if not received.

● Vendor/Manufacturer to coordinate all details of specified items with AML prior to production. Refer to drawings and/or included imagery for additional information.

● All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only. Do not use items as a final submittal.

● Anderson/Miller, Ltd. retains ownership of the worldwide copyright, patent and/or trademark and all other intellectual property rights whatsoever in all products and materials designed by