A001.pdf

(x)

2032H326R00017 x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT

THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

WASHINGTON DC 20220

SUITE 2100

TDP

MAIL STOP: 1425 NEW YORK AVE, NW

1500 PENNSYLVANIA AVENUE, NW

PROCUREMENT SERVICES DIVISIONS

DEPARTMENT OF THE TREASURY

26PR-SSP-023807/30/2026

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

07/30/2026

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not, is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The purpose of AMENDMENT A001

1) Change the proposal due date from 8/31/2026 to 09/11/2026 @ 1:00PM EST

SUBMIT PROPOSALS TO (ARLENE.DAVIS@TREASURY.GOV)

Delivery: 365 Days After Award

Delivery Location Code: SSP

SSP

US DEPARTMENT OF THE TREASURY-DEPAR

FINANCIAL MANAGEMENT, ATTN:MET SQUA

1500 PENNSYLVANIA AVE., NW

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

ARLENE Y. DAVIS

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

NSN 7540-01-152-8070

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

TEL: EMAIL: (202)286-9646 ARLENE.DAVIS@TREASURY.GOV

A001

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 4

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

2032H326R00017

WASHINGTON DC 20220 US

FOB: Destination

0001 1. BACKGROUND

This is a firm fixed price competitive bid contract under GSA Small Business.

2. SCOPE OF WORK

The contractor shall provide all labor, tools, equipment, management, supplies and any other items deemed necessary to complete the following:

a) Remove and install the CRAC units in Vault 9 and remove, modify and install two new doors in

Vault 9 as outlined in: a) MT Vault 9 M&E drawings dated 3-19-26 and b) MT Vault 9

Installation of New Doors dated 6-6-26.

The work is outlined in the documents under

“ADDITIONAL DOCUMENTS.” The scope of work includes, but is not limited to, the items identified therein.

A. Mechanical Phase 1

a. Remove the existing doors in V9E and V9D and enlarge wall opening. Forty-four-inch door to be installed in each opening. LAN room door will be

STC 50 Level 4. Both doors will be equipped with hardware including X-10 lock as per the drawings.

Existing card reader to be reused.

b. Shut off existing CRAG 9-1 and make it safe for removal.

c. Disconnect all power and water connections.

d. Rigg, remove and dispose of the existing CRAG 9-1.

e. Provide and install (1) floor stands to match footprint of the new Liebert unit.

f. Modify raised floor tiles and supports around new floor stands.

g. Provide and install new CRAC-9-1 as shown.

h. Provide and install all required pipes, valves and fittings as per the drawings.

i. Fabricate and install ductwork and damper as per the drawings.

j. Provide and install pipe insulation on all new pipes.

k. Perform certified air and water balancing.

l. Provide factory start-up and training for CRAG 9-1.

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

3 4

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

2032H326R00017

B. Mechanical Phase 2

a. Shut off existing CRAG 9-1A and make it safe for removal.

b. Disconnect all power and water connections.

c. Rigg, remove and dispose of the existing CRAG 9-1A.

d. Provide and install (1) floor stands to match footprint of the new Liebert unit.

e. Modify raised floor tiles and supports around new floor stands.

f. Provide and install new CRAC-9-1A as shown.

g. Provide and install all required pipes, valves and fittings as per the drawings.

h. Provide and install pipe insulation on all new pipes.

i. Perform certified air and water balancing.

j. Provide factory start-up and training for CRAG 9-1.

k. Repair wall openings and reinstall existing doors that had been previously removed.

Electrical Scope:

a. Provide and install all electrical circuits, raceways, wire and devices per the drawings.

b. Demolish existing power to CRAG unit to be removed.

c. Furnish and install new conduit, wiring, and circuit breakers, and disconnects to CRAG units

9-1 and 9-1A.

d. Furnish and install new conduit, wiring, and devices for two new receptacles by CRAG units.

Each receptacle is a dedicated circuit to panels.

e. Furnish and install conduit connection to CRAG unit one for Low Voltage Control.

Scope of Work Siemens Controls

a. Demo and make safe (1 CRAG) of control connection prior to the demolition by others.

b. Controls for CRAG units (Qty-2) per the below:

a. BACnet interface to (2) units. Furnish control communication wiring to (2) units' manufacturer on board controllers.

b. Mount and wire Space Temp/Humidity

c. Provide labor to assist in integration of the units onto the BAS system.

c. Update point names/ signal as needed in Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

4 4

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

2032H326R00017

Siemens programming database and graphics on the front end.

ADDITIONAL DOCUMENTS:

b) MT Vault 9 M&E drawings dated 3-19-26

c) MT Vault 9 Installation of New Doors dated 6-6-26

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)