20260428-RFQ-VGCC-HospitalSimLab-CArm.pdf

PDF 665 KB Posted

Attached to
C-Arm Imaging Solution for Hospital Simulation Lab
Solicitation number
129-129-04282026
Issued by
Vance County, North Carolina

About this file

This is a Request for Quotation (RFQ) issued by Vance-Granville Community College (VGCC) in Henderson, North Carolina for the procurement of a mobile C-Arm fluoroscopic imaging system. The C-Arm will support simulation-based surgical and procedural training at VGCC's Health Sciences Simulation Academy (HSSA), an interdisciplinary clinical training initiative funded through the North Carolina Community College System (NCCCS) High-Cost Healthcare Workforce Programs grant. The system will be used by faculty and students in Nursing, Radiography, and Medical Assisting programs to simulate intraoperative imaging scenarios in a controlled, low-risk educational setting. VGCC seeks one refurbished mobile C-Arm unit meeting specified clinical-grade standards, including a high-resolution 1K x 1K CCD camera, rotating anode X-ray tube with dual focal spots (0.3mm and 0.6mm), continuous fluoroscopy up to 20 mA, and digital spot imaging up to 75 mA. The RFQ was issued on April 29, 2026, with written questions due by May 11, 2026, and quotes due on May 13, 2026 at 12:00 PM ET. Contract award is targeted for May 15, 2026. The vendor must complete delivery and installation within 30 consecutive calendar days of purchase order receipt at VGCC's main campus location in Henderson, North Carolina. No site visits or bidders' conferences are mentioned in the solicitation.

Pricing shall be quoted as a total all-inclusive cost to the state covering delivery, handling, installation, and all applicable fees, with FOB Destination to the specified North Carolina location. Vendors may request a temporary tariff surcharge separate from the base contract price, subject to negotiation and mutual agreement, though the state is not obligated to accept any proposed surcharge. The RFQ specifies manufacturer's standard warranty coverage and requires vendors to provide complete descriptive literature, certifications, and technical specifications. Award will be made to the responsive vendor offering the lowest price meeting specifications and requirements, with the state reserving the right to make separate awards to different vendors, waive minor informalities, or cancel the RFQ without award. No specific budget range or funding amount is disclosed. The procurement is open to all qualified vendors without set-aside designations or restrictions on organizational types. Vendors must be registered with the North Carolina eVP (Electronic Vendor Portal) and the NC Secretary of State prior to contract award. Responses must include completed HUB Supplemental Vendor Information and Location of Workers Utilized by Vendor forms, demonstrating commitment to utilizing small, minority, women-owned, and physically handicapped contractors at a 10 percent utilization goal. Quotes must be submitted electronically to the purchasing agent, Priscilla Lewis, at lewisp@vgcc.edu, with pricing details, product specifications, warranty information, and all required attachments.

View the file

Other files

File Type Posted
129-04282026 RFQ-VGCC-HospitalSimLab-CArm-.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

STATE OF NORTH CAROLINA

Vance-Granville Community College

Request for Quote #: 129-04282026

C-Arm Imaging Solution for Hospital Simulation Lab

Date Issued: 4/28/2026

Quote Due Date: 5/13/2026

At 12:00 PM ET

Direct all inquiries concerning this RFQ to:

Priscilla Lewis

Purchasing Agent

Email: lewisp@vgcc.edu

Phone: 252-738-3221

Ver. 11/2025

Request for Quote #

129-04282026

For internal State agency processing, including tabulation of Quotes, provide your company’s eVP (Electronic

Vendor Portal) Number. Pursuant to G.S. 132-1.10(b) this identification number shall not be released to the public.

This page will be removed and shredded, or otherwise kept confidential, before the procurement file is made available for public inspection.

This page shall be filled out and returned with your Quote.

Failure to do so shall be sufficient cause to reject your Quote.

Vendor Name

Vendor eVP #

Note: For a contract to be awarded to you, your company (you) must be a North Carolina registered

Vendor in good standing. You must enter the Vendor number assigned through eVP (Electronic Vendor

Portal). If you do not have a Vendor number, register at https://evp.nc.gov/SignIn

Electronic responses ONLY will be accepted for this solicitation.

https://evp.nc.gov/SignIn

Ver: 11/2025 1

EXECUTION

In compliance with this Request for Quote (RFQ), and subject to all the conditions herein, the undersigned Vendor offers and agrees to furnish and deliver any or all items upon which prices are Quote, at the prices set opposite each item within the time specified herein.

By executing this Quote, the undersigned Vendor understands that false certification is a Class I felony and certifies that:

▪ this Quote is submitted competitively and without collusion (G.S. 143-54),

▪ that none of its officers, directors, or owners of an unincorporated business entity has been convicted of any violations of Chapter

78A of the General Statutes, the Securities Act of 1933, or the Securities Exchange Act of 1934 (G.S. 143-59.2), and

▪ it is not an ineligible Vendor as set forth in G.S. 143-59.1.

Furthermore, by executing this Quote, the undersigned certifies to the best of Vendor’s knowledge and belief, that:

▪ it and its principals are not presently debarred, suspended, proposed for debarment, declared ineligible or voluntarily excluded from covered transactions by any Federal or State department or agency.

As required by G.S. 143-48.5, the undersigned Vendor certifies that it, and each of its sub-Contractors for any Contract awarded as a result of this RFQ, complies with the requirements of Article 2 of Chapter 64 of the NC General Statutes, including the requirement for each employer with more than 25 employees in North Carolina to verify the work authorization of its employees through the federal E-Verify system.

As required by Executive Order 24 (2017), the undersigned Vendor certifies will comply with all Federal and State requirements concerning fair employment and that it does not and will not discriminate, harass, or retaliate against any employee in connection with performance of any Contract arising from this solicitation.

G.S. 133-32 and Executive Order 24 (2009) prohibit the offer to, or acceptance by, any State Employee associated with the preparing plans, specifications, estimates for public Contract; or awarding or administering public Contracts; or inspecting or supervising delivery of the public

Contract of any gift from anyone with a Contract with the State, or from any person seeking to do business with the State. By execution of this Quote response to the RFQ, the undersigned certifies, for Vendor’s entire organization and its employees or agents, that Vendor are not aware that any such gift has been offered, accepted, or promised by any employees or agents of Vendor’s organization.

By executing this Quote, Vendor certifies that it has read and agreed to the INSTRUCTION TO VENDORS and the NORTH CAROLINA GENERAL

TERMS AND CONDITIONS incorporated herein. These documents can be accessed from the ATTACHMENTS page within this document.

Failure to execute/sign quote prior to submittal may render quote invalid and it MAY BE REJECTED. Late quotes cannot be accepted.

COMPLETE/FORMAL NAME OF VENDOR:

STREET ADDRESS: P.O. BOX: ZIP:

CITY & STATE & ZIP: TELEPHONE NUMBER: TOLL FREE TEL. NO:

PRINCIPAL PLACE OF BUSINESS ADDRESS IF DIFFERENT FROM ABOVE (SEE INSTRUCTIONS TO VENDORS ITEM #21):

PRINT NAME & TITLE OF PERSON SIGNING ON BEHALF OF VENDOR:

VENDOR’S AUTHORIZED SIGNATURE: DATE: E-MAIL:

Vance-Granville Community College

Refer ALL Inquiries regarding this RFQ to:

Priscilla Lewis, Purchasing Agent lewisp@vgcc.edu

252-738-3221

Request for Quote # 129-04282026

Quotes will be opened: Wednesday, May 13, 2026 at 12:00pm

Using Agency: Health Sciences Commodity No. and Description: 422018 – Medical Diagnostic X-Ray

Products Requisition No.:

mailto:lewisp@vgcc.edu

Quote Number: 129-04282026 Vendor: ____________________________________

Ver: 11/2025 2

Ver: 11/2025 3

FOR STATE USE ONLY: Offer accepted and Contract awarded this ____ day of _______________, 20____, as indicated on the attached certification, by ______________________________________________________

VALIDITY PERIOD

Offer shall be valid for at least sixty (60) days from date of quote due date, unless otherwise stated here: ______ days, or if extended by mutual agreement of the parties. Any withdrawal of this offer shall be made in writing, effective upon receipt by the agency issuing this

RFQ.

QUOTE ACCEPTANCE

If your quote is accepted, all provisions of this RFQ, along with the written results of any negotiations, shall constitute the written agreement between the parties (“Contract”). The NORTH CAROLINA GENERAL TERMS AND CONDITIONS are incorporated herein and shall apply.

Depending upon the Goods or Services being offered, other terms and conditions may apply, as mutually agreed.

(Authorized Representative of Vance-Granville Community College)

Ver: 11/2025 4

1.0 PURPOSE AND BACKGROUND

2.0 GENERAL INFORMATION

2.1 REQUEST FOR QUOTE DOCUMENT

2.2 E-PROCUREMENT FEE

2.3 NOTICE TO VENDORS REGARDING RFQ TERMS AND CONDITIONS

2.4 RFQ SCHEDULE

2.6 QUESTIONS ABOUT QUOTE

2.7 QUOTE SUBMITTAL

2.8 QUOTE CONTENTS

2.9 ALTERNATE QUOTES

2.10 DEFINITIONS, ACRONYMS, AND ABBREVIATIONS

3.0 METHOD OF AWARD AND QUOTE EVALUATION PROCESS

3.1 METHOD OF AWARD

3.2 CONFIDENTIALITY AND PROHIBITED COMMUNICATIONS DURING EVALUATION

3.3 QUOTE EVALUATION PROCESS

3.4 PERFORMANCE OUTSIDE THE UNITED STATES

3.5 INTERPRETATION OF TERMS AND PHRASES

4.0 REQUIREMENTS

4.1 PRICING

4.2 PRODUCT IDENTIFICATION

4.4 TRANSPORTATION AND IDENTIFICATION

4.5 DELIVERY AND INSTALLATION

4.7 WARRANTY

4.9 DESCRIPTIVE LITERATURE/CERTIFICATION

4.10 HUB PARTICIPATION

4.12 VENDOR’S REPRESENTATIONS

4.14 AGENCY INSURANCE REQUIREMENTS MODIFICATION

4.15 SUBCONTRACTORS

4.16 SECRETARY OF STATE REGISTRATION

4.18 SUSTAINIBILITY EFFORTS

5.0 PRODUCT SPECIFICATIONS

SPECIFICATIONS

5.2 CERTIFICATION AND SAFETY LABELS

5.3 DEVIATIONS

6.0 CONTRACT ADMINISTRATION

6.1 CONTINUOUS IMPROVEMENT

6.2 INVOICES

6.3 DISPUTE RESOLUTION

6.9 CONTRACT CHANGES

7.0 ATTACHMENTS

ATTACHMENT A: PRICING

Ver: 11/2025 5

ATTACHMENT B: INSTRUCTIONS TO VENDORS

The Instructions to Vendors, which are incorporated herein by this reference, may be found here:

https://www.doa.nc.gov/pandc/north-carolina-instructions-vendors-1-2025/open

ATTACHMENT C: NORTH CAROLINA GENERAL TERMS & CONDITIONS

ATTACHMENT D: HUB SUPPLEMENTAL VENDOR INFORMATION

https://www.doa.nc.gov/pandc/onlineforms/pc-hub-supplemental-vendor-information-92021-pdf/openATTACHMENT E: CUSTOMER REFERENCE FORM

ATTACHMENT F: LOCATION OF WORKERS UTILIZED BY VENDOR

https://www.doa.nc.gov/pandc/onlineforms/pc-worker-location-92021-pdf/open

Ver: 11/2025 6

1.0 PURPOSE AND BACKGROUND

Vance-Granville Community College (VGCC) is expanding its Health Sciences Simulation Academy (HSSA), an interdisciplinary clinical training initiative funded through the North Carolina Community College System (NCCCS) High-Cost Healthcare Workforce Programs grant. The HSSA is designed to address the critical shortage of skilled healthcare workers in rural North Carolina by providing high-fidelity, simulation-based clinical training that mirrors real-world healthcare settings.

VGCC is repurposing an existing room within the Nursing Simulation Lab on the main campus in Henderson, North Carolina to house the expanded simulation environment. This space will support procedural and surgical scenario training across multiple Health Sciences programs including Nursing, Radiography, and Medical Assisting.

VGCC seeks to procure a mobile C-Arm fluoroscopic imaging system to support simulation-based surgical and procedural training within this environment. The C-Arm will be used by faculty and students to simulate intraoperative imaging scenarios, reinforcing clinical competency and procedural judgment in a controlled, low-risk setting prior to clinical placement.

2.0 GENERAL INFORMATION

2.1 REQUEST FOR QUOTE DOCUMENT

The RFQ is comprised of the base RFQ document, any attachments, and any addenda released before Contract award, which are incorporated herein by reference.

2.2 E-PROCUREMENT FEE

ATTENTION: The E-Procurement fee may apply to this solicitation. See paragraph entitled ELECTRONIC PROCUREMENT of the North Carolina General Terms and Conditions.

General information on the E-Procurement Services can be found at: http://eprocurement.nc.gov/.

2.3 NOTICE TO VENDORS REGARDING RFQ TERMS AND CONDITIONS

It shall be the Vendor’s responsibility to read the Instructions to Vendors, the North Carolina General Terms and Conditions, all relevant exhibits and attachments, and any other components made a part of this RFQ and comply with all requirements and specifications herein. Vendors also are responsible for obtaining and complying with all Addenda and other changes that may be issued in connection with this RFQ.

If Vendors have questions or issues, or exceptions regarding any component within this RFQ, those must be submitted as questions in accordance with the instructions in the QUOTE QUESTIONS Section. If the State determines that any changes will be made as a result of the questions asked, then such decisions will be communicated in the form of an RFQ addendum. The

State may also elect to leave open the possibility for later negotiation of specific provisions of the Contract that have been addressed during the question-and-answer period, prior to contact award.

Other than through this process or negotiation under 01 NCAC 05B.0503, the State rejects and will not be required to evaluate or consider any additional or modified terms and conditions submitted with Vendor’s quote. This applies to any language appearing in or attached to the document as part of the Vendor’s quote that purports to vary any terms and conditions or

Vendors’ instructions herein or to render the quote non-binding or subject to further negotiation. Vendor’s quote shall constitute a firm offer that shall be held open for the period required herein (“Validity Period” above).

The State may exercise its discretion to consider Vendor proposed modifications. By execution and delivery of this RFQ

Response, the Vendor agrees that any additional or modified terms and conditions, whether submitted purposely or inadvertently, shall have no force or effect, and will be disregarded unless expressly agreed upon through negotiations and incorporated by way of a Best and Final Offer (BAFO). Noncompliance with, or any attempt to alter or delete, this paragraph shall constitute sufficient grounds to reject Vendor’s quote as nonresponsive.

2.4 RFQ SCHEDULE

The table below shows the intended schedule for this RFQ. The State will make every effort to adhere to this schedule.

http://eprocurement.nc.gov/

Ver: 11/2025 7

Event Responsibility Date and Time

Issue RFQ State Wednesday, 4/29/2026

Submit Written Questions Vendor Monday, 5/112026

Provide Responses to Questions State Tuesday, 5/12/2026

Submit Quotes Vendor Thursday, 5/13/2026 by 12:00 PM ET

Contract Award State By Friday, 5/15/2026 at 12:00 PM ET

Contract Effective Date State When order is placed

2.6 QUESTIONS ABOUT QUOTE

Upon review of the RFQ documents, Vendors may have questions to clarify or interpret the RFQ in order to submit the best quote possible. To accommodate the Quote Questions process, Vendors shall submit any such questions by the “Submit

Written Questions” date and time provided in the RFQ SCHEDULE Section above.

Written questions shall be e-mailed to lewisp@vgcc.edu by the date and time specified above. Vendors will enter “RFQ # 129-

04282026: Questions” as the subject for the email. Question submittals will include a reference to the applicable RFQ section and be submitted in a format shown below:

Reference Vendor Question

RFQ Section, Page Number Vendor question …?

No information, instruction or advice provided orally or informally by any State personnel, whether made in response to a question or otherwise in connection with this RFQ, shall be considered authoritative or binding. Vendors shall rely only on written material contained in an addendum to this RFQ.

2.7 QUOTE SUBMITTAL

IMPORTANT NOTE: This is an absolute requirement. Vendor shall bear the risk of late submission due to unintended or unanticipated delay. It is the Vendor’s sole responsibility to ensure its quote has been received as described in this RFQ by the specified time and date of opening. The date and time of receipt will be marked on each quote when received. Any quote or portion thereof received after the quote submission deadline will be rejected.

Quotes may be submitted via electronic means, including but not limited to email, in response to this Request for Quote:

lewisp@vgcc.edu. Submission by any means shall include this RFQ, as provided in section 2.8.

If confidential and proprietary information is included in the proposal, also submit one (1) signed, REDACTED copy of the proposal. Such information may include trade secrets defined by N.C. Gen. Stat. § 66-152 and other information exempted from the Public Records Act pursuant to N.C. Gen. Stat. §132- 1.2. Vendor may designate information, Products, Services or appropriate portions of its response as confidential, consistent with and to the extent permitted under the statutes and rules set forth above. By so redacting any page, or portion of a page, the Vendor warrants that it has formed a good faith opinion, having received such necessary or proper review by counsel and other knowledgeable advisors, that the portions determined to be confidential and proprietary and redacted as such, meet the requirements of the Rules and Statutes set forth above.

However, under no circumstances shall price information be designated as confidential.

If the Vendor does not provide a redacted version of the proposal with its proposal submission, the Department may release an unredacted version if a record request is received.

IMPORTANT NOTE: It is the responsibility of the Vendor to have the signed quote physically in this Office by the specified time and date of opening, regardless of the method of delivery. This is an absolute requirement. The time of delivery will be marked on each quote when received, and any quote received after the submission deadline will not be accepted or evaluated. Quotes, subject to the conditions made a part hereof, will be received at the address indicated in the table in this Section, for furnishing and delivering the commodity as described herein.

Ver: 11/2025 8

2.8 QUOTE CONTENTS

Vendors shall populate all attachments of this RFQ that require the Vendor to provide information and include an authorized signature where requested. Failure to provide all required items, or Vendor’s submission of incomplete items, may result in the

State rejecting Vendor’s quote, in the State’s sole discretion

Vendor RFQ responses shall include the following items and attachments, which shall be arranged in the following order:

a) Cover Letter, which must contain all of the following; (i) a statement that confirms that the Vendor has read the RFQ in its entirety, including all links, and all Addenda released in conjunction with the RFQ; (ii) a statement that the Vendor agrees to perform in accordance with the scope of work, requirements, and specifications contained herein; and (iii)

Vendor’s agreement to comply with all instructions, terms and conditions, and attachments.

b) Title Page: Include the company name, address, phone number and authorized representative along with the Quote

Number.

c) Completed and signed version of EXECUTION PAGES, along with the body of the RFQ.

d) Signed receipt pages of any addenda released in conjunction with this RFQ, if required to be returned.

e) Vendor Response [Indicate relative section references as a guide to responding to sections requiring additional responses outside of the solicitation document. If not required, delete.]

f) Completed version of ATTACHMENT A: PRICING

g) Completed version of ATTACHMENT D: HUB SUPPLEMENTAL VENDOR INFORMATION

h) Completed version of ATTACHMENT F: LOCATION OF WORKERS UTILIZED BY VENDOR

2.9 ALTERNATE QUOTES

Unless provided otherwise in this RFQ, Vendor may submit alternate quotes for comparable Goods, various methods or levels of Service(s), or that propose different options. Alternate quotes must specifically identify the RFQ requirements and advantage(s) addressed by the alternate quote. Any alternate quote, in addition to the marking described above, must be clearly marked with the legend: “Alternate Quote #___”. Each quote must be for a specific set of Goods and Services and must include specific pricing. If a Vendor chooses to respond with various offerings, each must be offered with a separate price and be contained in a separate quote. Each quote must be complete and independent of other quotes offered.

2.10 DEFINITIONS, ACRONYMS, AND ABBREVIATIONS

Relevant definitions for this RFQ are provided in 01 NCAC 05A .0112 and in the Instructions to Vendors referenced below which are incorporated herein by this reference.

3.0 METHOD OF AWARD AND QUOTE EVALUATION PROCESS

3.1 METHOD OF AWARD

North Carolina G.S. 143-52 provides a general list of criteria the State shall use to award contracts, as supplemented by the additional criteria herein. The Goods or Services being procured shall dictate the application and order of criteria; however, all award decisions shall be in the State’s best interest.

All responsive bids will be reviewed, and award or awards will be based on the responsive bid(s) offering the lowest price that meets the specifications provided herein, to include any required verifications set out herein such as but not limited to past performance, references, and financial documents.

While the intent of this RFQ is to award a Contract(s) to a single Vendor for all line, the State reserves the right to make separate awards to different Vendors for one or more line items, to not award one or more line items or to cancel this RFQ in its entirety without awarding a Contract, if it is considered to be most advantageous to the State to do so.

Ver: 11/2025 9

If a Vendor selected for award is determined by the State to be a non-resident of North Carolina, all responsive bids will be reviewed to determine if any of them were submitted by a North Carolina resident Vendor who requested an opportunity to match the price of the winning bid, pursuant to Executive Order #50 and G.S. 143-59 (for more information, please refer to

ATTACHMENT H: VENDOR REQUEST FOR EXECUTIVE ORDER #50 PRICE MATCHING. If such bid(s) are identified, the State will then determine whether any such bid falls within the price-match range, and, if so, make a Contract award in accordance with the process that implements G.S. 143-59 and Executive Order #50.

The State reserves the right to waive any minor informality or technicality in quotes received.

3.2 CONFIDENTIALITY AND PROHIBITED COMMUNICATIONS DURING EVALUATION

While this RFQ is under evaluation, the responding Vendor, including any subcontractors and suppliers, is prohibited from engaging in conversations intended to influence the outcome of the evaluation. See Paragraph 29 of the Instructions To

Vendors entitled COMMUNICATIONS BY VENDORS.

Each Vendor submitting a quote to this RFQ, including its employees, agents, subcontractors, suppliers, subsidiaries and affiliates, is prohibited from having any communications with any person inside or outside the using agency; issuing agency;

other government agency office or body (including the procurement lead named above, any department secretary, agency head, members of the General Assembly and Governor’s office); or private entity, if the communication refers to the content of Vendor’s quote or qualifications, the content of another Vendor’s proposal, another Vendor’s qualifications or ability to perform a resulting contract, and/or the transmittal of any other communication of information that could be reasonably considered to have the effect of directly or indirectly influencing the evaluation of proposals, the award of a contract, or both.

Any Vendor not in compliance with this provision shall be disqualified from evaluation and award. A Vendor’s proposal may be disqualified if its subcontractor and/or supplier engage in any of the foregoing communications during the time that the procurement is active (i.e., the issuance date of the procurement until the date of contract award or cancellation of the procurement). Only those discussions, communications or transmittals of information authorized or initiated by the issuing agency for this RFQ or inquiries directed to the procurement lead named in this RFQ regarding requirements of the RFQ (prior to proposal submission) or the status of the award (after submission) are excepted from this provision.

3.3 QUOTE EVALUATION PROCESS

a) Quotes are requested for the items as specified, or item(s) equivalent in design, function, and performance. The

State reserves the right to reject any quote on the basis of fit, form and/or function, as well as cost.

b) The State shall review the responses to this RFQ to confirm that they meet the specifications and requirements. The

State reserves the right to waive any minor informality or technicality.

c) For all responses that pass the initial review process, the State will review and assess the Vendors’ pricing. The State may request additional formal responses or submissions from any or all Vendors for the purpose of clarification or to amplify the materials presented in any part of the quote. Vendors are cautioned, however, that the State is not required to request clarification, and often does not. Therefore, all quotes should be complete and reflect the most favorable terms available from the Vendor. Prices quoted cannot be altered or modified as part of a clarification.

d) Quotes will be evaluated, based on the award criteria identified in Section 3.1 METHOD OF AWARD.

Award of a Contract to one Vendor does not mean that the other quotes lacked merit, but that, all factors considered, the selected quote was deemed most advantageous and represented the best value to the State.

Vendors are cautioned that this is a request for quote, not a request or an offer to contract, and the State reserves the unqualified right to reject any and all offers at any time if such rejection is deemed to be in the best interest of the State.

3.4 PERFORMANCE OUTSIDE THE UNITED STATES

Vendor shall complete ATTACHMENT F: LOCATION OF WORKERS UTILIZED BY VENDOR. In addition to any other evaluation criteria identified in this RFQ, the State may also consider, for purposes of evaluating proposed or actual contract performance

Ver: 11/2025 10 outside of the United States, how that performance may affect the following factors to ensure that any award will be in the best interest of the State:

a) Total cost to the State

b) Level of quality provided by the Vendor

c) Process and performance capability across multiple jurisdictions

d) Protection of the State’s information and intellectual property

e) Availability of pertinent skills

f) Ability to understand the State’s business requirements and internal operational culture

g) Particular risk factors such as the security of the State’s information technology

h) Relations with citizens and employees

i) Contract enforcement jurisdictional issues

3.5 INTERPRETATION OF TERMS AND PHRASES

This RFQ serves two functions: (1) to advise potential Vendors of the parameters of the solution being sought by the State; and

(2) to provide (together with other specified documents) the terms of the Contract resulting from this procurement. The use of phrases such as “shall,” “must,” and “requirements” are intended to create enforceable contract conditions. In determining whether quotes should be evaluated or rejected, the State will take into consideration the degree to which Vendors have proposed or failed to propose solutions that will satisfy the State’s needs as described in the RFQ. Except as specifically stated in the RFQ, no one requirement shall automatically disqualify a Vendor from consideration. However, failure to comply with any single requirement may result in the State exercising its discretion to reject a quote in its entirety.

4.0 REQUIREMENTS

This Section lists the requirements related to this RFQ. By submitting a quote, the Vendor agrees to meet all stated requirements in this Section, as well as any other specifications, requirements, and terms and conditions stated in this RFQ. If a Vendor is unclear about a requirement or specification or believes a change in a requirement would allow for the State to receive a better quote, the Vendor is encouraged to submit these items in the form of a question during the question-and-answer period in accordance with the Quote Questions Section above.

4.1 PRICING

Quote price shall constitute the total cost to the State for delivery fully assembled and ready for use, including all applicable charges for shipping, delivery, handling, administrative and other similar fees. Complete ATTACHMENT A: PRICING FORM and include in Vendor’s response.

INVOICES MAY NOT BE PAID UNTIL AN INSPECTION HAS OCCURRED AND THE GOODS OR SERVICES ACCEPTED.

4.1.1 Import Tariff Temporary Surcharge

Pricing shall be exclusive of any pending tariffs or temporary tariff surcharge. Vendor may request a temporary tariff surcharge in ATTACHMENT A: PRICING SUBMITTAL WORKBOOK as a charge separate from the contract price. Any temporary tariff surcharge(s) associated with purchases shall be provided by way of a percentage tariff surcharge. All tariff surcharges proposed are intended to be temporary and based on current tariff implications specific to related commodities with evidence of submitted documentation of affected MSRP products. Vendor understands that the agency may request additional justification. Any temporary tariff surcharge percentage will be negotiated and mutually agreed upon. The state is not obligated to accept any proposed import tariff surcharge. Proposed tariff surcharges may be used as a factor for evaluation and award

4.2 PRODUCT IDENTIFICATION

SUITABILITY FOR INTENDED USE

Vendors are requested to offer only items directly complying with the specifications herein or comparable items which will provide the equivalent capabilities, features and diversity called for herein. The State reserves the right to evaluate all quotes for suitability for the required use and to award the one best meeting requirements and considered to be in the State’s best interest.

Ver: 11/2025 11

4.4 TRANSPORTATION AND IDENTIFICATION

The Vendor shall deliver Free-On-Board (FOB) Destination to any requested location within the State of North Carolina with all transportation costs and fees included in the total quote price.

When an order is placed using a purchase order, the purchase order number shall be shown on all packages and shipping manifests to ensure proper identification and payment of invoices. If an order is placed without using a purchase order, such as via phone, the Buyer’s name shall be shown on all packages. A complete packing list shall accompany each shipment. Vendors shall not ship any products until they have received an order.

4.5 DELIVERY AND INSTALLATION

The Vendor shall deliver Free-On-Board (FOB) Destination to the following location(s):

Vance-Granville Community College

200 Community College Road

Henderson, NC 27537

Vendor shall complete delivery within 30 consecutive calendar days after receipt of purchase order.

Delivery shall not be considered to have occurred until installation has been completed. Upon completion of the installation, the Vendor shall remove and properly dispose of all waste and debris from the installation site. The Vendor shall be responsible for leaving the installation area clean and ready to use.

4.7 WARRANTY

Manufacturer’s standard warranty shall apply. Vendors shall include a copy of the manufacturer’s standard warranty with the quote response.

The report of a problem does not presuppose that every call must result in an “on-site” visit for service/repair. The Vendor and/or service sub-contractor shall utilize best efforts to resolve problems in a timely fashion by using acceptable servicing methods to include, but not limited to, verbal problem analysis and remote diagnosis. The warranty requirement does not impose any additional duty on the State to make other than normal and good faith problem resolution efforts or expenditures of time. Vendor shall be responsible for compliance with warranty terms by any third-party service provider. Vendor shall provide contact information for warranty service provider, below.

Vendor is authorized by manufacturer to repair equipment offered during the warranty period? YES NO

Will the Vendor provide warranty service? YES NO, a manufacturer-authorized third party will perform warranty service.

Contact information for warranty service provider:

Company Name: _______________________________________________

Company Address: _____________________________________________

Contact Person (name): _________________________________________

Contact Person (phone number): __________________________________

Contact Person (email): _________________________________________

4.9 DESCRIPTIVE LITERATURE/CERTIFICATION

Each quote shall be accompanied by complete descriptive literature, specifications, certifications, and all other pertinent data necessary for thorough evaluation of the item(s) offered and sufficient to determine compliance of the item(s) with the specifications. Failure to include such information shall be a sufficient basis for rejection of the quote.

Ver: 11/2025 12

4.10 HUB PARTICIPATION

Pursuant to North Carolina General Statute G.S. 143-48, it is State policy to encourage and promote the use of small, minority, physically handicapped, and women contractors in purchasing Goods and Services. As such, this RFQ will serve to identify those

Vendors that are minority owned or have a strategic plan to support the State’s Historically Underutilized Business program by meeting or exceeding the goal of 10% utilization of diverse firms as 1st or 2nd tier subcontractors. Vendor shall complete

ATTACHMENT D: HUB SUPPLEMENTAL VENDOR INFORMATION.

4.12 VENDOR’S REPRESENTATIONS

If the quote results in an award, Vendor agrees that it will not enter any agreement with a third party that may abridge any rights of the State under the Contract. If any Services, deliverables, functions, or responsibilities not specifically described in this solicitation are required for Vendor’s proper performance, provision and delivery of the Service and deliverables under a resulting Contract, or are an inherent part of or necessary sub-task included within such service, they will be deemed to be implied by and included within the scope of the contract to the same extent and in the same manner as if specifically described in the Contract. Unless otherwise expressly provided herein, Vendor will furnish all of its own necessary management, supervision, labor, facilities, furniture, computer and telecommunications equipment, software, supplies and materials necessary for the Vendor to provide and deliver the Services and/or other Deliverables.

4.14 AGENCY INSURANCE REQUIREMENTS MODIFICATION

A. Default Insurance Coverage from the General Terms and Conditions applicable to this Solicitation:

☐ Small Purchases

☒ Contract value in excess of the Small Purchase threshold, but up to $1,000,000.00

☐ Contract value in excess of $1,000,000.00

4.15 SUBCONTRACTORS

No portion of the work shall be subcontracted without prior written consent of the State. In the event that the Vendor desires to subcontract some part of the work specified herein, the Vendor shall furnish with their bid the names, qualifications, and experience of their proposed subcontractors. The Vendor shall, however, remain solely and fully liable and responsible for the work done by its subcontractor(s) and shall assure compliance with all the requirements and specifications of the contract.

4.16 SECRETARY OF STATE REGISTRATION

Prior to entering into a contract with the State, the awarded Vendor(s) must complete registration with the NC Secretary of State. Upon notification of award, the selected Vendor(s) must furnish evidence of filing within 10 business days. Failure to provide this documentation may result in the disqualification of the Vendor(s) bid from further consideration for the award.

A contract award under the above-referenced solicitation, and the resulting purchase orders, will produce repeated orders and transactions in North Carolina and will constitute “transacting business” in the State, which requires a certificate of authority from the North Carolina Secretary of State as provided in G.S. §55-15-01 (corporations) or §57D-7-01 (LLCs). Please go to: https://www.sosnc.gov/ to register.

Vendor registered with the North Carolina Secretary of State: Yes☐ No ☐

4.18 SUSTAINIBILITY EFFORTS

According to G.S. 143-58.2, it is the policy of this State to encourage and promote the purchase of products with recycled content and to purchase items that are reusable, refillable, repairable, more durable, and less toxic to the extent that the purchase or use is practicable and cost effective. The bid must describe how environmental requirements which relate to clear labeling of the environmental/sustainability attributes (e.g. environmental certifications, total and post-consumer recycled content, etc.) of products in the proposed product catalogs, demonstrating the ability to run usage reports that include information about each product’s environmental/sustainability attributes, packaging and recycling of spent products.

https://www.sosnc.gov/

Ver: 11/2025 13

5.0 PRODUCT SPECIFICATIONS

Vance-Granville Community College (VGCC) seeks to furnish and deliver one (1) mobile C-Arm fluoroscopic imaging system to support simulation-based clinical training at the Nursing Simulation Lab located on the main campus at 200 Community College Road, Henderson, North Carolina 27537.

SPECIFICATIONS

Item # Specifications

Product/Service Offered Meets Specification

1 C-Arm fluoroscopic imaging system meeting (at a minimum) the following specifications:

- High resolution 1k x 1k CCD Camera

- Rotating Anode X-Ray Tube, Patient directory with image scroll

- Anatomical marker

- Continuous high level fluoro up to 20 mA, digital spot up to 75 mA, Digital Imaging Processing and Workstation

- 1K x 1K x 16 bit digital image processing, brightness stabilization, nose filter with on-screen indicator, real-time motion artifact and noise reduction system, real-time variable edge enhancement, negate mode, automatic and manual contrast and brightness control, Multi-LED X-ray on indicator

- X-ray Dose Summary X-Ray Tube

- Focal spots: 0.3mm and 0.6mm

- Anode heat capacity: 300,000 HU

- Housing heat capacity: 1,600.000 HU

- 1 Year Parts Warranty

YES NO

5.2 CERTIFICATION AND SAFETY LABELS

All manufactured items and/or fabricated assemblies subject to operation under pressure, operation by connection to an electric source, or operation involving a connection to a manufactured, natural, or LP gas source shall be constructed and approved in a manner acceptable to the appropriate state inspector which customarily requires the label or re-examination listing or identification marking of the appropriate safety standard organization; such as the American Society of Mechanical

Engineers for pressure vessels; the Underwriters Laboratories and /or National Electrical Manufacturers’ Association for electrically operated assemblies; or the American Gas Association for gas operated assemblies, where such approvals of listings have been established for the type of device offered and furnished. Further, all items furnished shall meet all requirements of the Occupational Safety and Health Act (OSHA), and state and federal requirements relating to clean air and water pollution.

5.3 DEVIATIONS

The nature of all deviations from the Specifications listed herein shall be clearly described by the Vendor. Otherwise, it will be considered that items offered by the Vendor are in strict compliance with the Specifications provided herein, and the successful

Vendor shall be required to supply conforming goods. Deviations shall be explained in detail on an attached sheet. However, no implication is made or intended by the State that any deviation will be acceptable. Do not list objections to the North

Carolina General Terms and Conditions in this section.

VENDOR’S RESPONSE

Ver: 11/2025 14

6.0 CONTRACT ADMINISTRATION

All Contract Administration requirements are conditioned on an award resulting from this solicitation. This information is provided for the Vendor’s planning purposes

6.1 CONTINUOUS IMPROVEMENT

The State encourages the Vendor to identify opportunities to reduce the total cost to the State. A continuous improvement effort consisting of various ideas to enhance business efficiencies as performance progresses.

6.2 INVOICES

Vendor shall invoice the Procurement Entity. The standard format for invoicing shall be Single Invoices meaning that the Vendor shall provide the Procurement Entity with an invoice for each order. Invoices shall include detailed line item information to allow Procurement Entity to verify pricing at point of receipt matches the correct price from the original date of order. At a minimum, the following fields shall be included on all invoices:

Vendor’s Billing Address, Customer Account Number, NC Contract Number, Order Date, Buyer’s Order Number, Manufacturer

Part Numbers, Vendor Part Numbers, Item Descriptions, Price, Quantity, and Unit of Measure.

INVOICES MAY NOT BE PAID UNTIL AN INSPECTION HAS OCCURRED AND THE GOODS ACCEPTED.

6.3 DISPUTE RESOLUTION

During the performance of the Contract, the Parties agree that it is in their mutual interest to resolve disputes informally. Any claims by the Vendor shall be submitted in writing to the State’s Contract Manager for resolution. Any claims by the State shall be submitted in writing to the Vendor’s Project Manager for resolution. The Parties shall agree to negotiate in good faith and use all reasonable efforts to resolve such dispute(s).

During the time the Parties are attempting to resolve any dispute, each shall proceed diligently to perform their respective duties and responsibilities under this Contract. The Parties will agree on a reasonable amount of time to resolve a dispute. If a dispute cannot be resolved between the Parties within the agreed upon period, either Party may elect to exercise any other remedies available under the Contract, or at law. This provision, when agreed in the Contract, shall not constitute an agreement by either party to mediate or arbitrate any dispute.

6.9 CONTRACT CHANGES

Contract changes, if any, over the life of the Contract shall be implemented by contract amendments agreed to in writing by the State and Vendor. Amendments to the contract can only be made through the contract administrator.

The remainder of this page is intentionally left blank

Ver: 11/2025 15

7.0 ATTACHMENTS

**IMPORTANT NOTICE**

RETURN THE REQUIRED ATTACHMENTS WITH YOUR RESPONSE

FOLLOW THE LINKS TO ACCESS EACH ATTACHMENT

ATTACHMENT A: PRICING

Complete and return the Pricing associated with this IFB, which can be found in the table below:

Item # Specifications Unit Cost

2 Shipping / Handling / Installation

ATTACHMENT B: INSTRUCTIONS TO VENDORS

The Instructions to Vendors, which are incorporated herein by this reference, may be found here:

https://www.doa.nc.gov/pandc/north-carolina-instructions-vendors-1-2025/open

ATTACHMENT C: NORTH CAROLINA GENERAL TERMS & CONDITIONS

The North Carolina General Terms and Conditions, which are incorporated herein by this reference, may be found here:

https://www.doa.nc.gov/north-carolina-general-terms-and-conditions-5-2025/open

ATTACHMENT D: HUB SUPPLEMENTAL VENDOR INFORMATION

Complete and return the Historically Underutilized Businesses (HUB) Vendor Information form, which can be found at the following link:

https://www.doa.nc.gov/pandc/onlineforms/pc-hub-supplemental-vendor-information-92021-pdf/openATTACHMENT E:

CUSTOMER REFERENCE FORM

Complete and return the Customer Reference Form, which can be found at the following link:

https://ncadmin.nc.gov/media/15503/open

ATTACHMENT F: LOCATION OF WORKERS UTILIZED BY VENDOR

Complete and return the Location of Workers Utilized by Vendor, which can be found at the following link:

https://www.doa.nc.gov/pandc/onlineforms/pc-worker-location-92021-pdf/open

*** Failure to Return the Required Attachments May Eliminate

Your Response from Further Consideration *** https://www.doa.nc.gov/pandc/north-carolina-instructions-vendors-1-2025/open https://www.doa.nc.gov/north-carolina-general-terms-and-conditions-5-2025/open https://www.doa.nc.gov/pandc/onlineforms/pc-hub-supplemental-vendor-information-92021-pdf/open https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fncadmin.nc.gov%2Fmedia%2F15503%2Fopen&data=05%7C02%7Cjonathan.davis%40doa.nc.gov%7Cf298a5b0a18e4016d32908dc692f5e36%7C7a7681dcb9d0449a85c3ecc26cd7ed19%7C0%7C0%7C638500899363455583%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=Se0VOx%2Fjf4cx8k4yLIIQae7kkNtrpbCiXU4%2F7fCSBNo%3D&reserved=0 https://www.doa.nc.gov/pandc/onlineforms/pc-worker-location-92021-pdf/open

File details come from the government source that posted it. Updated .