2026-QQ-835_Attachment_A_Specifications_Cattlemen_Monument_Signs.pdf
PDF 1 MB Posted
- Attached to
- Cattlemen Monument Signs
- Solicitation number
- 2026-QQ-835
- Issued by
- Sarasota County, Florida
About this file
This specification document outlines monument sign requirements for Sarasota County, Florida, for the design, engineering, permitting, fabrication, site preparation, and installation of two double-sided monument signs located at 1301 Cattlemen Road in Sarasota. The project requires contractors to deliver all-inclusive quotes covering labor, permits, materials, equipment, setup, delivery, and project completion. The monument signs must comply with local zoning requirements, Sarasota County Branding Guidelines, and withstand Category 4 hurricane force winds. The contractor is responsible for obtaining all necessary permits, locating and marking underground utilities, conducting field measurements, site cleanup, and scheduling work hours with the project manager in advance.
The structure specifications require 8-inch concrete masonry unit block construction with bond beams and rebar, supported by a concrete and rebar foundation base. The exterior finish must be Dryvit DPR with a sandblast application in two colors: Sherwin Williams 7029 Agreeable Gray for shaded areas and SW 9154 Perle Noir for non-shaded areas. Signage elements include a pin-mounted anodized cast aluminum black logo with isolation space equal to the size of the "S," pin-mounted black address numbers in Bookman Old Style font on the monument side, and white building and address verbiage in Myriad Bold font inside a box. Sarasota County retains final design approval authority. The contractor must remove all project debris and maintain clean work sites, with no materials placed in County trash containers.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
August 12, 2026
MONUMENT SIGN SPECIFICATIONS
Sarasota County is seeking qualified, experienced contractors for designing, engineering, permitting, fabricating, site preparation and installation of two monument signs per attached drawing and following specifications. Monuments are double sided. Two locations are shown in specifications. All signage shall conform to Sarasota County Branding Guidelines.
Sarasota County 1301 Cattlemen Road Sarasota, FL 34232
General Notes
1. Comply with local zoning requirements per governing authority.
2. Monument shall be durable, weather resistant, and withstand Category 4 hurricane force winds.
3. Sarasota County will have final sign design approval.
4. Obtain necessary permits (i.e. building, sign, etc.).
5. Locate and mark underground utilities prior to any digging to avoid damage.
6. Site shall be marked according to property lines and setback requirements.
7. The Contractor quote shall be all-inclusive, covering the cost of labor, permits, materials, equipment, setup, delivery, and all costs necessary to complete the project as specified herein.
8. The Contractor shall be responsible for all field measurements.
9. The Contractor shall collect and haul all debris from said project location. No project materials shall be placed in County trash container. All areas shall be cleaned of any and all project materials.
10. Work hours will be scheduled with the project manager in advance.
Structure
1. Monument signs must be double sided
2. Foundation Base - Concrete & Rebar
3. Foundation to Sign Connection – Rebar
4. Sign – 8” CMU Block - Bond Beams with Rebar
Dryvit
1. DPR Finish – Sandblast
2. Color 1 – SW 7029 Agreeable Gray – Shaded area on drawing
3. Color 2 – SW 9154 Perle Noir – Non shaded area on drawing
Logo
1. Isolation Area around entire logo is at least the size of the “S” in the logo
2. Pin mounted anodized cast aluminum
3. Color – Black
4. Font – Bookman Old Style
Address Number - Side of Monument
1. Pin mounted anodized cast aluminum
2. Color – Black
3. Font – Bookman Old Style
Building and Address Verbiage - Inside Box
1. Pin mounted anodized cast aluminum
2. Color – White
3. Font – Myriad Bold
A B M
A
B
File details come from the government source that posted it. Updated .