2-U46 532-26 Tefft MS HVAC Repl DRAWINGS 100% OTB SET.pdf
PDF 35 MB Posted
- Solicitation number
- 405 - 25/26
- Issued by
- Kane County, Illinois
About this file
This is a technical drawing set for mechanical demolition notes at Tefft Middle School, located at 1100 Shirley Avenue, Streamwood, Illinois 60107, under the purview of School District U-46 (address: 355 East Chicago Street, Elgin, Illinois 60120). Project No. 532-26 is dated February 2, 2026, and represents 100 percent construction documents for HVAC replacement work. The drawings detail mechanical demolition procedures organized in two phases. Phase 1 work encompasses removal of existing air handling units, associated piping and ductwork, installation of owner-purchased rooftop units and related components, ductwork connections, insulation work, control systems integration, and rebalancing of all air and water systems. Phase 1 areas include locker rooms, gymnasium, cafeteria, library, auditorium, band room, main office, second floor office suite, and orchestra room. Phase 2 work includes furnishing and installation of vertical unit ventilators, associated piping and ducting, exterior wall modifications, boiler room equipment removal and replacement, motor control center removal, power panel replacement, and all related cutting, patching, and painting.
The specifications detail comprehensive requirements for contractor responsibilities including mandatory pre-bid site inspections of existing building conditions, notification requirements with minimum three business days advance written notice, maintenance of mechanical building operation during occupied periods, protection of owner property and flooring from damage, and daily site cleanup and debris disposal. The contractor must verify all existing piping and ductwork routing and sizes in the field, adapt work to actual site conditions, coordinate with other trades, isolate and drain all mechanical systems properly, and restore all areas to clean condition upon completion. Work is restricted to off-hours operations at the owner's convenience. All roofing work must be performed by certified roofing contractors approved by the owner. Drawings include a partial first floor mechanical demolition plan at 1/8-inch scale showing equipment locations and piping sizes throughout various facilities including gymnasium, locker rooms, cafeteria, kitchen, offices, and support spaces.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MECHANICAL
DEMOLITION NOTES
Sheet No.:
U46 Project No.:
532-26
Date:
February 2, 2026
Sheet Title:
M
SA
P ro j.
N o.
S.
V irg in ia S tre et
C ry st al L ak e, Il lin oi s
O ffi ce
-7
-8
Fa x
5-
8-w w w
.m sa
-c e.
co m
TO DO SO AT THE OWNER'S CONVENIENCE DURING OFF HOURS. CONTRACTOR
SHALL EXAMINE EXISTING PIPING, CONDUITS, STRUCTURAL SUPPORTING
EXAMINATION OF ALL LOCATIONS WHERE NEW WORK IS TO BE INSTALLED AND
CONTRACTOR SHALL INSPECT THE PREMISES AND MAKE A DETAILED
CONTRACTOR SHALL ADAPT HIS WORK TO MEET ALL ACTUAL CONDITIONS ON
EXISTING DUCTS, PIPES, CONDUITS AND BEAMS NOT SHOWN ON PLANS.
AS POSSIBLE, CONTRACTOR SHALL ADJUST HIS WORK AS REQUIRED TO AVOID
EXISTING BUILDING HAS BEEN INDICATED ON THE DRAWINGS AS ACCURATELY
WHILE THE SIZE AND LOCATION OF NEW WORK AND EQUIPMENT IN THE
MIGHT HAVE BEEN REASONABLY FORESEEN BY AN INSPECTION OF THESE
PRIOR TO BIDDING. NO EXTRAS WILL BE ALLOWED FOR WORK WHICH
SHALL THOROUGHLY FAMILIARIZE THEMSELVES WITH ACTUAL JOB CONDITIONS
THE CONTRACTORS SHALL VISIT AND INSPECT THE EXISTING BUILDING AND
INTERFERED WITH, CONTRACTOR SHALL REROUTE AND RECONNECT ALL SUCH
MECHANICAL EQUIPMENT IN AREA OF EXISTING BUILDING NOT BE ALTERED IS
WHERE THE EXISTING PIPING, CONDUIT OR DUCTWORK SERVING ANY EXISTING
ALL CUTTING AND PATCHING AS REQUIRED FOR WORK TO BE BY THE CONTRACTOR.
COORDINATE WORK WITH OTHER TRADES TO AVOID CONFLICTS AND DELAYS.
THE EXISTING PREMISES.
BEAMS, ETC.
PREMISES.
3.
2.
NOTES RE: INSPECTING EXISTING BUILDING
PIPES OR DUCTWORK WITH PRIOR APPROVAL FROM ENGINEER.
SHALL PROVIDE OWNER ADVANCE NOTICE IN WRITING MINIMUM 3 BUSINESS DAYS
1.
8.
REFER TO SPECIFICATIONS.
6.
7.
VERIFY EXISTING CONDITIONS AND LOCATIONS IN FIELD PRIOR TO
IT SHALL BE THE CONTRACTOR'S RESPONSIBILITY TO MAINTAIN THE EXISTING
RECONNECT SUCH ITEMS IN PROPER OPERATING CONDITION AT NEW LOCATIONS.
INTERFERED WITH, OBSTRUCT OR ARE OBSTRUCTED BY THESE ALTERATIONS.
MATERIALS, AND ALL OTHER MECHANICAL ITEMS WHICH INTERFERE OR ARE
DISCONNECT, REMOVE OR RELOCATE EXISTING MECHANICAL EQUIPMENT,
OBSOLETE BY THESE ALTERATIONS AND ADDITIONS. THESE ARE THE PROPERTY
EQUIPMENT AND ALL OTHER MECHANICAL ITEMS WHICH ARE RENDERED
DISCONNECT AT SOURCE AND REMOVE EXISTING ELECTRICAL MATERIALS AND
AND ELECTRICAL ITEMS AND EQUIPMENT, BOTH NEW AND EXISTING, AS MAY
MAKE NECESSARY MODIFICATIONS AND ADJUSTMENTS TO ALL MECHANICAL
FROM PERFORMING THE WORK REQUIRED UNDER THIS CONTRACT.
BIDDING. FAILURE TO DO SO SHALL NOT RELIEVE CONTRACTOR
THE CONTRACTOR SHALL CONSULT WITH THE OWNER AND MAKE ARRANGEMENTS
IF IT IS ABSOLUTELY NECESSARY TO SHUT DOWN THE FACILITY AT ANY TIME,
BUILDING IN MECHANICAL OPERATION AT ALL TIMES DURING OCCUPIED PERIOD.
NOTES RE: EXISTING CONDITIONS
BE REQUIRED BY THESE ALTERATIONS AND ADDITIONS.
5.
4.
2.
3.
1.
PRIOR TO SHUT DOWN.
INDICATES EXISTING TO REMAIN.
INDICATES EXISTING TO BE DISCONNECTED
AND REMOVED.
EXISTING TO REMAIN.E.T.R.
IN WORKING CONDITION TO THE OWNER'S STOCK AT THE DISCRETION OF THE
OF THE OWNER AND SHALL EITHER BE REMOVED FROM THE SITE OR RETURNED
OWNER.
WITH OWNER.
OF ALL SYSTEMS REQUIRED FOR EXECUTION OF WORK. COORDINATE PROCEDURES
CONTRACTOR IS RESPONSIBLE FOR ISOLATING, DRAINING, REFILLING & VENTING 9.
CLEARANCE REQUIRED PRIOR TO BIDDING. CONTRACTOR SHALL BE RESPONSIBLE
TO THE ATTENTION OF THE ARCHITECT ANY LACK OF ANY NECESSARY SPACE OR
CONTRACTOR AFTER INSPECTING THE PREMISES AND THE DRAWINGS SHALL CALL
FOR ALL NECESSARY CHANGES IF HE NEGLECTS TO DO SO.
4.
DISCONNECT & REMOVE ALL EXISTING SUPPLY AIR DIFFUSERS AND RETURN AIR GRILLES. DISCONNECT & REMOVE EXISTING FLEX DUCTWORK AND PORTION OF DUCTWORK BACK TO RECONNECTION POINT.
VERIFY EXISTING DUCTWORK ROUTING & SIZES IN FIELD. THOROUGHLY CLEAN DUCTWORK AND MODIFY FOR RECONNECTION TO NEW DIFFUSERS. ANY PORTION OF INSULATION DAMAGED SHALL BE REPLACED WITH NEW
PER SPECIFICATION.
DISCONNECT & REMOVE ALL EXISTING HOT/CHILLED WATER SUPPLY & RETURN PIPING IN THE ENTIRE BUILDING, VALVES, HANGERS, RISERS UP FROM FLOOR BELOW & RELATED APPURTENANCES COMPLETE. VERIFY ALL PIPING
ROUTING IN FIELD. SEAL & PATCH OPENINGS TO MATCH EXISTING.
DISCONNECT & REMOVE EXISTING FLOOR MOUNTED UNIT VENTILATOR, CONTROLS, T-STAT, WIRING, O.A. LOUVER, CONDENSATE DRAIN PIPING, ALL BRANCH HOT/CHILLED WATER SUPPLY & RETURN PIPING, VALVES & RELATED APPURTENANCES COMPLETE. REMOVE HOT/CHILLED WATER BRANCH PIPING BACK TO MAINS AND CAP.
SEAL, PATCH AND IN-FILL OPENINGS WEATHER TIGHT TO MATCH EXISTING.
DISCONNECT & REMOVE EXISTING AIR HANDLING UNIT, CONTROLS, T-STAT, WIRING, PORTION OF SUPPLY & RETURN AIR DUCTWORK UP TO RECONNECTION POINTS, DAMPERS, ALL BRANCH HOT/CHILLED WATER PIPING, VALVES, HANGERS & RELATED APPURTENANCES COMPLETE. VERIFY ALL DUCTWORK AND PIPING ROUTING, SIZES & TYPES IN FIELD. DISCONNECT & REMOVE ALL FRESH AIR INTAKE DUCTWORK, DAMPERS, GOOSENECK, INTAKE AIR HOOD ON ROOF & ROOF CURB COMPLETE. SEAL & PATCH FLOOR AND ROOF OPENINGS WEATHER TIGHT TO MATCH EXISTING. ALL ROOFING WORK MUST BE PERFORMED BY CERTIFIED ROOFING CONTRACTOR
APPROVED BY THE OWNER.
DISCONNECT & REMOVE EXISTING CABINET HEATER, CONTROLS, T-STAT, WIRING & RELATED APPURTENANCES COMPLETE. BRANCH HOT WATER SUPPLY & RETURN PIPING & VALVES TO REMAIN FOR RECONNECTION TO NEW CABINET HEATER. MODIFY PIPING AS REQUIRED FOR NEW CONNECTION. SEAL, PATCH & PAINT OPENINGS TO
MATCH EXISTING.
TEFFT
MIDDLE SCHOOL PHASING OF WORK
PHASE 1 WORK:
· WORK TO INCLUDE ALL WORK ASSOCIATED WITH THE REMOVAL OF EXISTING
AIR HANDLING UNITS, ASSOCIATED PIPING AND DUCTWORK TO BE REMOVED
BACK TO MAINS AND CAPPED, OR TO POINT OF RECONNECTION.
· RECEIVING, UNLOADING AND INSTALLATION OF ALL EQUIPMENT
PRE-PURCHASED BY THE OWNER. THIS EQUIPMENT INCLUDES ROOFTOP UNITS,
CURBS, ARCHITECTURAL SCREENS, ELECTRICAL DISTRIBUTION PANELS.
· INSTALLATION OF ALL ROOFTOP UNITS, ROOF CUTTING AND PATCHING,
DUCTWORK CONNECTIONS, INSULATION, FLOOR CUTTING AND PATCHING FOR
DUCTWORK PENETRATIONS, CONTROLS ASSOCIATED WITH ROOFTOP UNIT
OPERATION, BMS INTEGRATION, GAS PIPING WORK, GENERAL TRADES WORK
ASSOCIATED WITH WALL OPENINGS, FLOOR OPENINGS AND CHASE
CONSTRUCTION AS REQUIRED.
· THE AREAS INCLUDED IN THIS PHASE ARE LOCKER ROOMS, GYMNASIUM,
CAFETERIA, LIBRARY, AUDITORIUM, BAND, MAIN OFFICE, SECOND FLOOR
OFFICE SUITE, ORCHESTRA.
· CEILING DEMOLITION AND RECONSTRUCTION ASSOCIATED WITH WORK AND
ALL REQUIRED CUTTING/PATCHING AND PAINTING.
· REBALANCING OF ALL AIR AND WATER SYSTEMS AS REQUIRED RESULTING
FROM THE WORK INCLUDED IN PHASE 1.
· ALL ASSOCIATED ELECTRICAL WORK INCLUDING ELECTRICAL ROOF
CURBS/PULL BOXES, FEEDERS, FIRE ALARM, POWER PANELS AND LIGHTING
REPLACEMENT RESULTING FROM WORK INCLUDED IN PHASE 1.
PHASE 2 WORK:
· WORK TO INCLUDE ALL FURNISHING AND INSTALLATION OF VERTICAL UNIT
VENTILATORS, ALL ASSOCIATED PIPING, DUCTING AND CONTROLS WORK.
· EXTERIOR WALL CUTTING, PATCHING AND INFILL. INSTALLATION OF ALL WALL
LOUVERS AND ASSOCIATED WORK.
· ALL HOT WATER AND CHILLED WATER INSTALLATION AND INSULATION
INCLUDING ALL REQUIRED WALL CUTTING AND PATCHING, SLEEVES, HANGERS.
· ALL BOILER ROOM EQUIPMENT AND PIPING REMOVAL AND REPLACEMENT
INCLUDING ALL FLUES, GAS PIPING, PUMPS, BOILERS, CONTROLS, INSULATION
AND ALL REQUIRED CUTTING AND PATCHING.
· REMOVAL OF MOTOR CONTROL CENTERS AND ASSOCIATED TC CONTROLS AND
FIRE ALARM CONTROLS.
· REMOVAL AND REPLACEMENT OF POWER PANELS SERVING UNIT VENTILATORS
AT LOCATIONS NOTED ON THE DRAWINGS, INCLUDING ALL ASSOCIATED
CUTTING, PATCHING AND PAINTING.
· ALL GENERAL TRADES WORK ASSOCIATED WITH EQUIPMENT, PIPING AND
ELECTRICAL WORK ASSOCIATED WITH WORK INCLUDED IN THIS PHASE.
· ALL CEILING REMOVAL/REPLACEMENT AS WELL AS ALL REQUIRED LIGHTING
REPLACEMENT WITH THE INSTALLATION OF UNIT VENTILATORS AND PIPING.
DISCONNECT & REMOVE EXISTING CEILING MOUNTED UNIT VENTILATOR, SUPPORTS, HANGERS, CONTROLS, T-STAT, WIRING, O.A. LOUVER, CONDENSATE DRAIN PIPING, ALL DUCTWORK, DIFFUSERS, REGISTERS, ALL BRANCH HOT/CHILLED WATER SUPPLY & RETURN PIPING, VALVES & RELATED APPURTENANCES COMPLETE.
REMOVE HOT/CHILLED WATER BRANCH PIPING BACK TO MAINS AND CAP. SEAL, PATCH AND IN-FILL OPENINGS
WEATHER TIGHT TO MATCH EXISTING.
· COVER AND PROTECT ALL OWNER FURNITURE AND ELECTRONICS FROM
DEBRIS DURING CONSTRUCTION PROJECT. PROTECT AND COVER ALL
FLOORING AS REQUIRED TO AVOID DAMAGE DUE TO USE OF LADDERS, LIFTS,
ETC. PROVIDE MASONITE TO COVER FLOORING IN ALL AREAS INCLUDING
GYMNASIUMS, MULTI-PURPOSE ROOMS, CAFETERIAS, ETC., TO PREVENT
DAMAGE/SCRATCHES TO SPECIAL SURFACES. THOROUGHLY CLEAN AND
VACUUM ALL AREAS THAT WORK HAS BEEN COMPLETED IN.
· PROTECT THE MATERIALS AND WORK OF OTHER TRADES FROM DAMAGE
DURING INSTALLATION OF THE WORK PROVIDED UNDER DIVISIONS 26, 27
AND 28.
· PAY PARTICULAR ATTENTION TO THE LIMITED SPACE AVAILABLE IN CERTAIN
LOCATIONS OF THE PROJECT SO THAT EQUIPMENT MAY BE INSTALLED
WITHOUT ANY INTERFERENCE.
· CONTRACTOR SHALL CLEANUP SITE ON A DAILY BASIS. REMOVE ALL
RUBBISH, DEBRIS, ETC. ACCUMULATED FROM THIS OPERATION DURING THE
COURSE OF THE WORK. LEGALLY DISPOSE OF SAME OFF-THE-SITE.
· CONTRACTOR RESPONSIBLE FOR MOVING OWNER'S FURNITURE AS NEEDED
TO ACCOMPLISH WORK.
· WHEN WORKING AFTER-SCHOOL HOURS, CONTRACTOR SHALL PROTECT ALL
OWNER'S FURNITURE, ELECTRONICS, ETC., IN CLASSROOMS AND OFFICES,
AND RETURN THESE LOCATIONS TO THE SAME CONDITION AS ORIGINALLY
FOUND SO AS TO PREPARE BUILDING FOR THE FOLLOWING SCHOOL DAY.
· AFTER THE COMPLETION OF INSTALLATION, ALL SYSTEMS SHALL BE
THOROUGHLY CLEANED. CLEAN ALL FOREIGN MATTER FROM ALL FIXTURES,
EQUIPMENT, AND EXTERIOR OF CONDUITS.
DISCONNECT & REMOVE ALL DUCTWORK WITHIN CHASE COMPLETE. REMOVE ROOF INTAKE AIR HOOD. SEAL & PATCH WEATHER TIGHT. ALL ROOFING WORK MUST BE PERFORMED BY APPROVED ROOFING CONTRACTOR
LISTED ON SHEET MTE-M2.3.
DISCONNECT & REMOVE EXISTING AIR HANDLING UNIT, CONTROLS, T-STAT, WIRING, ALL SUPPLY & RETURN AIR DUCTWORK, DAMPERS, GRILLES, DIFFUSERS, REGISTERS, ALL BRANCH HOT/CHILLED WATER PIPING, VALVES, HANGERS & RELATED APPURTENANCES COMPLETE. VERIFY ALL DUCTWORK AND PIPING ROUTING, SIZES & TYPES IN FIELD. DISCONNECT & REMOVE ALL FRESH AIR INTAKE DUCTWORK, DAMPERS, GOOSENECK, INTAKE AIR HOOD ON ROOF & ROOF CURB COMPLETE. SEAL & PATCH FLOOR AND ROOF OPENINGS WEATHER TIGHT TO MATCH EXISTING. ALL ROOFING WORK MUST BE PERFORMED BY CERTIFIED ROOFING CONTRACTOR
APPROVED BY THE OWNER.
AutoCAD SHX Text
MTE- MD0.0
AutoCAD SHX Text
HVAC REPLACEMENT AT:
AutoCAD SHX Text
TEFFT MIDDLE SCHOOL 1100 SHIRLEY AVE., STREAMWOOD, IL. 60107
AutoCAD SHX Text
ELGIN, ILLINOIS 60120
AutoCAD SHX Text
SCHOOL DISTRICT U-46
AutoCAD SHX Text
355 EAST CHICAGO STREET
AutoCAD SHX Text U-46 P.N. 532-26
AutoCAD SHX Text Revisions:
AutoCAD SHX Text
%%UGENERAL MECHANICAL
AutoCAD SHX Text
%%UDEMOLITION NOTES:
AutoCAD SHX Text
%%ULEGENDS:
AutoCAD SHX Text
%%UMECHANICAL DEMOLITION PLAN NOTES
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
%%UDAILY CLEANING OF JOB SITE:
AutoCAD SHX Text
PROTECTION AND
AutoCAD SHX Text
AutoCAD SHX Text
PARTIAL FIRST FLOOR
PLAN - MECHANICAL
DEMOLITION
Sheet No.:
U46 Project No.:
532-26
Date:
February 2, 2026
Sheet Title:
M
SA
P ro j.
N o.
S.
V irg in ia S tre et
C ry st al L ak e, Il lin oi s
O ffi ce
-7
-8
Fa x
5-
8-w w w
.m sa
-c e.
co m
UPUP
UP UP
RFEC
FERFEC
R
FE
C
AED
R
R
RFEC
FE
RFEC
FE
FE
C
RFEC
RFEC
RFEC
RFEC
FE
C
W
COOLER
FREEZER
CAFETERIA
TOILET
WORK ROOM
STAIRS
WOMEN
MEN
G130
STORAGE
G127
OFFICE
NURSE
CONFERENCE 124
PRINCIPAL
OFFICE
G113
OFFICE
OFFICE
G122
STORAGE
G106
STORAGE
G104
STORAGE
G105
STORAGE
ELEC/
STORAGE
G103
STORAGE
G108
STORAGE
G116
STORAGE
DRY
STORAGE
STAIRS
STAIRS
STAIRS
G109
TOILET
G129
GIRL'S LOCKER ROOM
G115
BOY'S LOCKER ROOM
G101
GYMNASIUM
G111 J.C.
KITCHEN
MAIN
OFFICE
G125 J.C.
J.C.
G118
SHOWERS
G117
DRYING G119
RINSE
G120
TOWEL
G132
SHOWERS
G131
DRYING G133
RINSE
G134
TOWEL
G124
ISOL.
G110
ISOL.
G112
DRESSING
G126
DRESSING
G123
TOILET
G135
TOWEL
G121
TOWEL
TICKET
I.D. OFFICE
SERVICE
164A
TOILET
JC/
TRASH
PROJ.
VAULT
LOCKER
3" 2-1/2" 1-1/2"
1-1/2"
2-1/2"
1-1/4"
1-1/4" UP 1-1/4" UP 1-1/4" UP
1-1/4" UP
2-1/2" UP
3-1/2" UP
4" UP
1-1/4" UP 3-1/2" 4" 4"
1-1/2" 1-1/2"
1-1/4"
1-1/4"
1-1/2"
1-1/4"
1-1/4"
1-1/2" 2"
1-1/4" UP 1-1/2" UP
5"
1"
EA
EA
EA
REFER TO MTE-MD0.0
FOR NOTES
2" UP
1"
1"
3/4"
1"
1"
1"
1-1/4"
1"
1-1/4" UP
1"
1" UP
1"
1-1/2"
1-1/4"
1-1/4"
CUT & REMOVE EXISTING PIPING AT
THIS POINT. EXISTING PIPING ABOVE
SOFFIT TO BE CAPPED AND
ABANDONED IN PLACE.
AutoCAD SHX Text
%%UPARTIAL FIRST FLOOR PLAN - MECHANICAL DEMOLITION
AutoCAD SHX Text
SCALE: 1/8"=1'-0"
AutoCAD SHX Text
MTE- MD1.1
AutoCAD SHX Text
%%UKEY PLAN
AutoCAD SHX Text
NO SCALE
AutoCAD SHX Text
AutoCAD SHX Text N
AutoCAD SHX Text N
AutoCAD SHX Text
HVAC REPLACEMENT AT:
AutoCAD SHX Text
TEFFT MIDDLE SCHOOL 1100 SHIRLEY AVE., STREAMWOOD, IL. 60107
AutoCAD SHX Text
ELGIN, ILLINOIS 60120
AutoCAD SHX Text
SCHOOL DISTRICT U-46
AutoCAD SHX Text
355 EAST CHICAGO STREET
AutoCAD SHX Text U-46 P.N. 532-26
AutoCAD SHX Text Revisions:
http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=GR3SDH-27D&R=HT&TID=&VC=13&AL=True&VER=4:9:7&P=hatco_gr3sd_spec_sheet.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text S http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text D http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text C http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text S http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text D http://www.kclcad.com/emailstaging.asp?M=24CGP10&R=CA&TID=&VC=13&AL=True&VER=4:9:7&P=24CGP10+0612.pdf AutoCAD SHX Text C http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=ZEPHAIRE+G+Dbl&R=BG&TID=&VC=13&AL=True&VER=4:9:7&P=zephaire-g-spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf AutoCAD SHX Text D http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf AutoCAD SHX Text D http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf AutoCAD SHX Text D http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=FN2860-3-30-14/3&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG20.34.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=4339&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG60.32.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=PHTT-12&R=FW&TID=&VC=13&AL=True&VER=4:9:7&P=ClymateIQ_PHTT_Spec.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=HSA-10-1FK&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=EG8174.pdf http://www.kclcad.com/emailstaging.asp?M=SMPT30120&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=eg10.34.pdf http://www.kclcad.com/emailstaging.asp?M=SMPT30120&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=eg10.34.pdf http://www.kclcad.com/emailstaging.asp?M=SMPT30120&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=eg10.34.pdf http://www.kclcad.com/emailstaging.asp?M=SMPT30120&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=eg10.34.pdf http://www.kclcad.com/emailstaging.asp?M=SMPT30120&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=eg10.34.pdf http://www.kclcad.com/emailstaging.asp?M=SMPT30120&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=eg10.34.pdf http://www.kclcad.com/emailstaging.asp?M=SMPT30120&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=eg10.34.pdf http://www.kclcad.com/emailstaging.asp?M=SMPT30120&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=eg10.34.pdf http://www.kclcad.com/emailstaging.asp?M=SMPT30120&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=eg10.34.pdf http://www.kclcad.com/emailstaging.asp?M=SMPT30120&R=ME&TID=&VC=13&AL=True&VER=4:9:7&P=eg10.34.pdf…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .