2-Fencing Specification Sheet.docx
DOCX document 709 KB Posted
- Attached to
- AM27-4 Price BLM Spring Fencing
- Solicitation number
- AM27-4
- Issued by
- Utah
About this file
This is a Fencing Specification Sheet for a Request for Quotes issued by the State of Utah Division of Purchasing on behalf of Wildlife Resources. The project involves the procurement of jack-leg fencing materials for delivery to 125 S 600 W Price, UT 84501. The specifications detail steel pipe jack fencing components including jack legs (2 3/8" OD with .090 wall thickness, 54" long with six welded stubs), 12-foot steel rails (1 7/8" OD with .090 wall thickness), and three-piece hinged corner sets in graduated sizes (12"x14", 16"x18", and 19"x22"). The requested quantities are 228 steel jacks, 600 12-foot steel rails, and 12 three-piece corner sets. The RFQ evaluation will be based on responsiveness and lowest cost, with quotes required to comply fully with the stated specifications.
Quotes will be evaluated according to the Utah Procurement Code's objective criteria, and vendors are permitted to submit only one primary bid; multiple or alternate bids will not be accepted. Any exceptions or deviations from the RFQ specifications must be protested in writing to the Division of Purchasing prior to the closing date. The State reserves the right to solicit additional quotes via email, phone, or other methods as permitted by applicable rules. No pricing terms, set-asides, incumbency information, funding sources, or contract term details are specified in the provided documentation.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 1-Vendor Prerequisites - Quotes Part 8 PS SP.pdf | ||
| 3-Attachment A-PO Terms and Conditions.docx | DOCX document | |
| 4-Attachment B-Scope of Work.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Fencing Specification Sheet
Steel Pipe Jack Fence Specs
Jack Legs: 2 3/8” OD X .090 wall thickness new bare pipe.
Top of Jack is capped.
12’ Rail: 1 7/8” OD X .090 wall thickness new bare pipe.
Jacks
· Jack Legs shall have an outside diameter of 2 3/8” and a wall thickness of .090.
· Top of the lack shall be capped.
· Jacks overall finished height shall be 50 inches tall
· The long lack leg shall measure 54” long
· The 54” jack leg shall comprise six stubs (3 either side of the jack leg). The stubs shall measure 6 inches in length. The stub diameter shall fit inside the 12’ Rails
· Stubs shall measure 17” from the ground, 30” from the ground, and 42” from the ground.
· Jack legs comprising the welded stubs shall be welded to a supporting leg.
· The distance between the bottom of the Jack leg (comprising the welded stubs) and the bottom supporting leg shall measure 35” Rails
· The rails shall measure 1-7/8” outside diameter with a wall thickness of .090
· The rails shall measure 12 feet in length
· The rails shall fit over the 6-inch-long stubs on the jack Corner sets
· Corner sets shall be hinged pipe that fits inside the 12’ rails
· Each corner shall consist of 3 corners with the following measurements 12”x14”, 16”x18”, 19”x22”.
Quantity
| Item Description |
| Quantity |
| Steel Jack |
| 228 |
| 12’ Steel Rails |
| 600 |
| Steel Corner Set (3-piece set) |
| 12 |
Pipe jack fence examples and hinged corner sets examples can be found below.
Figure 1 Pipe Jack Fence Example 1
Figure 2 Pipe Jack Fence Example 2
Figure 3 Pipe Jack Fence Example 3
Figure 4 Pipe Jack Fence Corner Set Example 1 image1.JPG image2.JPG image3.JPG image4.JPG image5.JPG
File details come from the government source that posted it. Updated .