08 - DSE7320 MKII (3).pdf

dse7310/20 MKII

AUTO START & AUTO MAINS FAILURE

CONTROL MODULES

dseGenset

8 6

PC

USB

PORT

DC OUTPUTS ANALOGUE

INPUT

EMERGENCY

STOP

DC POWER

SUPPLY 8-35V

DSE2130

DSE2157

DSE2548

DSE2510/20

232 485

MODBUSMODEM

RS232 AND

RS485

1ph 2ph 3ph N

1ph 2ph 3ph N

VOLTS

1 1

DEUTZ

ISUZU

PERKINS

CATERPILLAR

MTU

VOLVO

CUMMINS

SCANIA

D + W/L

GENERATOR

SENSING

VOLTS

ELECTRONIC

ENGINES &

MAGNETIC PICK-UP

FUEL & CRANK

OUTPUTS

(Flexible with CAN)

CHARGE

ALTERNATOR

N/O VOLT

FREE OUTPUT

N/C VOLT FREE

OUTPUT

MAINS (UTILITY)

SENSING

DSE7320 MKII ONLY

ISSUE 6

COMPREHENSIVE FEATURE LIST TO SUIT A

WIDE VARIETY OF GEN-SET APPLICATIONS

OTHER

DSE7310/20 MKII

CONFIGURABLE

INPUTS

DSENET®

EXPANSION

The DSE7310 MKII is an Auto Start Control Module and the DSE7320 MKII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications.

Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).

The DSE7320 MKII will also monitor the mains (utility) supply. The modules include USB, RS232 and RS485 ports as well as dedicated DSENet® terminals for system expansion.

Both modules are compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offer an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements.

The extensive list of features includes enhanced event and performance monitoring, remote communications & PLC functionality. Dual mutual standby is now available on both the DSE7310 MKII & DSE7320 MKII using RS232 or RS485 communications. This provides for a simpler and more convenient installation with more advanced features such as true engine hours balancing.

The modules can be easily configured using the DSE Configuration Suite PC software.

Selected front panel editing is also available.

ENVIRONMENTAL TESTING STANDARDS

ELECTRO-MAGNETIC COMPATIBILITY

BS EN 61000-6-2

EMC Generic Immunity Standard for the Industrial Environment

BS EN 61000-6-4

EMC Generic Emission Standard for the Industrial Environment

ELECTRICAL SAFETY

BS EN 60950

Safety of Information Technology Equipment, including Electrical Business Equipment

TEMPERATURE

BS EN 60068-2-1

Ab/Ae Cold Test -30 oC

BS EN 60068-2-2

Bb/Be Dry Heat +70 oC

VIBRATION

BS EN 60068-2-6

Ten sweeps in each of three major axes 5 Hz to 8 Hz at +/-7.5 mm, 8 Hz to 500 Hz at 2 gn

HUMIDITY

BS EN 60068-2-30

Db Damp Heat Cyclic 20/55 oC at 95% RH 48 Hours

BS EN 60068-2-78

Cab Damp Heat Static 40 oC at 93% RH 48 Hours

SHOCK

BS EN 60068-2-27

Three shocks in each of three major axes 15 gn in 11 mS

DEGREES OF PROTECTION

PROVIDED BY ENCLOSURES

BS EN 60529

IP65 - Front of module when installed into the control panel with the supplied sealing gasket.

FEATURES

1ph 2ph 3ph E/N

GENERATOR /

LOAD CURRENT

DEEP SEA ELECTRONICS PLC UK

Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH

TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303

EMAIL sales@deepseaplc.com WEBSITE www.deepseaplc.com

DEEP SEA ELECTRONICS INC USA

3230 Williams Avenue, Rockford, IL 61101-2668 USA

TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708

EMAIL sales@deepseausa.com WEBSITE www.deepseausa.com

055-203/09/15 (1)

RELATED MATERIALS

TITLE PART NO’S

DSE7310 MKII & DSE7320 MKII Installation Instructions 053-181 DSE7310 MKII & DSE7320 MKII Operator Manual 057-253 DSE7310 MKII & DSE7320 MKII Configuration Suite PC Manual 057-243 dse7310/20 MKII

AUTO START & AUTO MAINS FAILURE

CONTROL MODULES

dseGenset

FEATURES

Registered in England & Wales No.01319649 VAT No.316923457

Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only.

SPECIFICATION

DC SUPPLY

CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous 5 V for upto 1 minute

CRANKING DROPOUTS

Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.

LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT

510 mA at 12 V, 240 mA at 24 V

MAXIMUM STANDBY CURRENT

330 mA at 12 V, 160 mA at 24 V

CHARGE FAIL/EXCITATION RANGE

0 V to 35 V

GENERATOR & MAINS (UTILITY)

VOLTAGE RANGE

15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE

3.5 Hz to 75 Hz

MAGNETIC PICKUP

VOLTAGE RANGE

+/- 0.5 V to 70 V

FREQUENCY RANGE

10,000 Hz (max)

INPUTS

DIGITAL INPUTS A TO H

Negative switching

ANALOGUE INPUTS A & F

Configurable as:

Negative switching digital input 0 V to 10 V sensor 4 mA to 20 mA sensor Resistive sensor

ANALOGUE INPUTS B, C, D & E

Configurable as:

Negative switching digital input Resistive sensor

OUTPUTS

OUTPUT A & B (FUEL & START)

15 A DC at supply voltage

OUTPUTS C & D

8 A AC at 250 V AC (Volt-free)

AUXILIARY OUTPUTS E, F, G, H, I & J

2 A DC at supply voltage

DIMENSIONS

OVERALL

245 mm x 184 mm x 51 mm 9.6” x 7.2” x 2.0”

PANEL CUT-OUT

220 mm x 160 mm 8.7” x 6.3”

MAXIMUM PANEL THICKNESS

8 mm 0.3”

STORAGE TEMPERATURE RANGE

-40°C to +85°C -40 °F to +185 °F

OPERATING TEMPERATURE RANGE

-30°C to +70°C -22 °F to +158 °F

HEATED DISPLAY VARIANT

-40 °C to +70 °C -40 °F to +158 °F

DSE7310 MKII

DSE7320 MKII

KEY FEATURES

• 4-Line back-lit LCD text display

• Multiple Display Languages

• Five key menu navigation

• LCD alarm indication

• Heated display option available

• Customisable power-up text and images

• DSENet expansion compatibility

• Data logging facility

• Internal PLC editor

• Protections disable feature

• Fully configurable via PC using

USB, RS232 & RS485

communication

• Front panel configuration with PIN protection

• Power save mode

• 3 phase generator sensing and protection

• 3 phase mains (utility) sensing and protection (DSE7320 MKII only)

• Automatic load transfer control (DSE7320 MKII only)

• Generator current and power monitoring (kW, kvar, kVA, pf)

• Mains current and power monitoring (kW, kvar, kVA, pf) (DSE7320 MKII only)

• kW and kvar overload and reverse power alarms

• Over current protection

• Unbalanced load protection

• Independent earth fault protection

• Breaker control via fascia buttons

• Fuel and start outputs configurable when using CAN

• 6 configurable DC outputs

• 2 configurable volt-free relay outputs

• 6 configurable analogue/digital inputs

• Support for 0 V to 10 V & 4 mA to 20 mA sensors

• 8 configurable digital inputs

• Configurable 5 stage dummy load and load shedding outputs

• CAN, MPU and alternator frequency speed sensing in one variant

• Real time clock

• Manual and automatic fuel pump control

• Engine pre-heat and post-heat functions

• Engine run-time scheduler

• Engine idle control for starting & stopping

• Fuel usage monitor and low fuel level alarms

• Simultaneous use of RS232 and RS485 communication ports

• True dual mutual standby using RS232 or RS485 for accurate engine hours balancing.

• MODBUS RTU support with configurable MODBUS pages.

• Advanced SMS messaging (additional external modem required)

• Start & stop capability via SMS messaging

• 3 configurable maintenance alarms

• Compatible with a wide range of CAN engines, including tier 4 engine support

• Uses DSE Configuration Suite PC Software for simplified configuration

• Licence-free PC software

• IP65 rating (with supplied gasket) offers increased resistance to water ingress

• Modules can be integrated into building management systems (BMS) using MODBUS RTU

KEY BENEFITS

• Automatically transfers between mains (utility) and generator (DSE7320 MKll only) for convenience.

• Hours counter provides accurate information for monitoring and maintenance periods

• User-friendly set-up and button layout for ease of use

• Multiple parameters are monitored & displayed simultaneously for full visibility

• The module can be configured to suit a wide range of applications for user flexibility

• PLC editor allows user configurable functions to meet user specific application requirements.