19GT5026Q0054 - GTM - Prefabricated Modular Housing Unit.pdf

U.S. Embassy Guatemala July 10, 2026

Subject: Request for Quotation number 19GT5026Q0054 – Guatemala – Prefab Modular Steel Units

Dear Prospective Quoter:

Enclosed is a Request for Quotation (RFQ) for 19GT5026Q0054 – Guatemala – Prefab Modular Steel Units. If you would like to submit quotation, follow the instructions in Section 3 of the solicitation, complete the required portions of the attached document, and submit it to the address shown on the Standard Form 1449 that follows this letter.

The U.S. Government intends to award a contract to the responsible company submitting an acceptable offer at the lowest price. We intend to award a contract based on initial quotations, without holding discussions, although we may hold discussions with companies in the competitive range if there is a need to do so.

Due date to receive questions for this solicitation is July 29, 2026, by 10:00 hours. Submit your questions via email to SerechZA@state.gov

Quotations are due August 20, 2026 by COB 17:00 hours. No quotations will be accepted after this time.

Proposals must be in English and incomplete proposals will not be accepted.

Your quotation must be submitted electronically to GuatemalaBids@state.gov It is important to make sure the submission is made in specific size and format; in MS-Word 2007/2010 or MS-Excel 2007/2010 or Adobe Acrobat (pdf) file format. The file size must not exceed 30MB. If the file size should exceed the 30MB, the submission must be made in separate files and attached to separate emails with less than 30MB each.

In order for a quotation to be considered, you must also complete and submit the following:

1. SF-1449

2. Section I, Pricing

3. Section 5 Representations and Certifications

4. Additional information as required in Section 3

5. The Offeror should submit a completed IRS Form W-14, found at www.irs.gov/w14, to ensure compliance with

FAR 52.229-11;

6. Proof of SAM Registration

Offerors shall be registered in the SAM (System for Award Management) database at https://www.sam.gov prior to submittal of their offer/proposal as prescribed under FAR 4.1102. Failure to be registered at time of proposal submission may deem the offeror’s proposal to be considered non-responsible and no further consideration will be given. Therefore, offerors are highly encouraged to register immediately if they are interested in submitting a response to this requirement. The guidelines for registration in SAM are also available at: https://www.fsd.gov/fsd-gov/learning-centersystem.do?sysparm_system=SAM“

Sincerely, Beau Garrett Contracting Officer mailto:SerechZA@state.gov mailto:GuatemalaBids@state.gov http://www.irs.gov/w14 https://www.sam.gov/ https://www.fsd.gov/fsd-gov/learning-centersystem.do?sysparm_system=SAM https://www.fsd.gov/fsd-gov/learning-centersystem.do?sysparm_system=SAM

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER

PR16117229

PAGE 1 OF 50 PAGES

2. CONTRACT NO.

3. AWARD/ EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER

19GT5026Q0054

6. SOLICITATION ISSUE

DATE

07/10/2026

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME Zayda A Serech

b. TELEPHONE NUMBER(No collect calls)

(502)30316838

8. OFFER DUE DATE/

LOCAL TIME

08/20/2026 / 17:009. ISSUED BY CODE GT500 10. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR:

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS

HUBZONE SMALL

BUSINESS

(WOSB) ELLIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM NAICS:

EDWOSB EMERGING SMALL BUSINESS

AMERICAN EMBASSY GUATEMALA CITY

Boulevard Austriaco 11-51, Zona 16, ATTN: GSO -

PROCUREMENT SECTION

Guatemala

GUATEMALA SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8 (A) SIZE STANDARD:

13b. RATING11. DELIVERY FOR FOB DESTINAT-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700) 14. METHOD OF SOLICITATION

x RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

AMERICAN EMBASSY GUATEMALA CITY

1a. Avenida 7-59, Zona 10, ATTN: NAS

WAREHOUSE

GUATEMALA

GUATEMALA

AMERICAN EMBASSY GUATEMALA CITY

Boulevard Austriaco 11-51, Zona 16, ATTN: GSO - PROCUREMENT SECTION

Guatemala

GUATEMALA

CODE FACILITY

CODE

17a. CONTRACTOR/

OFFERER

TELEPHONE NO.

18a. PAYMENT WILL BE MADE BY

AMERICAN EMBASSY GUATEMALA CITY

1A. AVENIDA 7-41, ZONA 10, ATTN: CASHIER

GUATEMALA

GUATEMALA

CODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA

26. TOTAL AWARD AMOUNT (For Govt. Use Only) x 27a.SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA x ARE ARE NOT ATTACHED

27b.CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN _ __ COPIES

TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS

SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS

SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED HEREIN.

29. AWARD OF CONTRACT: REF. _ _______________ OFFER DATED

_ __________. YOUR OFFER ON SOLICITATION (BLOCK 5), INCLUDING ANY

ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS

TO ITEMS:30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

31c. DATE SIGNED

AUTORIZED FOR LOCAL REPRODUCTION STANDARD FORM 1449 (REV. 02/2012)

PREVIOUS EDITION IS NOT USABLE Computer Generated Prescribed by GSA - FAR (48 CFR) 53.212

ITEM NO. 20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

_______________________________32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

36. PAYMENT 37. CHECK NUMBER

PARTIAL FINAL

COMPLETE PARTIAL FINAL

38. S/R ACCOUNT NO. 39. S/R VOUCHER NO. 40. PAID BY

41.a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 42a. RECEIVED BY (Print) 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41C. DATE

42b. RECEIVED AT (Location)

42c. DATE REC’D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

SBU - CONTRACTING AND ACQUISITIONS

TABLE OF CONTENTS

SECTION 1 - THE SCHEDULE

• SF 1449 cover sheet

• Continuation To SF-1449, RFQ Number 19GT5026Q0054, Prices, Block 23

• Continuation To SF-1449, RFQ Number 19GT5026Q0054, Schedule Of

Supplies/Services, Block 20 Description/Specifications/Work Statement

• Attachment 1 to Description/Specifications/Performance Work Statement, Government Furnished Property

SECTION 2 - CONTRACT CLAUSES

• Contract Clauses

• Addendum to Contract Clauses - FAR and DOSAR Clauses not Prescribed in Part 12

SECTION 3 - SOLICITATION PROVISIONS

• Solicitation Provisions

• Addendum to Solicitation Provisions - FAR and DOSAR Provisions not Prescribed in

Part 12

SECTION 4 - EVALUATION FACTORS

• Evaluation Factors

• Addendum to Evaluation Factors - FAR and DOSAR Provisions not Prescribed in

Part 12

SECTION 5 - REPRESENTATIONS AND CERTIFICATIONS

• Offeror Representations and Certifications

• Addendum to Offeror Representations and Certifications - FAR and DOSAR

Provisions not Prescribed in Part 12

SECTION 1 - THE SCHEDULE

CONTINUATION TO SF-1449

RFQ NUMBER 19GT5026Q0054

PRICES, BLOCK 23

I. SCOPE OF SERVICES

The Bureau of International Narcotics and Law Enforcement Affairs (INL) Section at the U.S.

Embassy in Guatemala is seeking to procure Prefabricated Modular Steel Detention Housing Units to meet the specifications set forth in this Statement of Work.

II. PRICING

The prices listed shall include all costs associated with the contract, including, but not limited to, engineering and design services, design, labor, materials, fabrication, quality assurance, testing, packaging, export preparation, (see FAR 52.228-4 and FAR 52.228-5), overhead, profit, transportation, shipping and handling, and all applicable local and federal taxes, unless otherwise exempt.

Offerors shall provide a detailed cost breakdown for any optional items or separately priced features. Shipping costs shall be quoted separately and shall include the total shipping weight and dimensions of all items included in the quotation.

CLIN DESCRIPTION QTY UNIT

UNIT

PRICE

(NET)

TOTAL

PRICE

(NET)

01 Prefabricated Modular Steel Detention Housing Units 4 EA

Itemized breakdown of any optional items or separately priced features 1 GLOBAL

Shipping & Handling Cost (to Miami) Provide the total weight of all items included in the quotation.

1 GLOBAL

04 Warranty 1 YEAR

GRAND TOTAL (NET)

III. TYPE OF CONTRACT

This requirement will result in the award of a Firm Fixed Price (FFP) contract in accordance with the specifications of this statement of work (SOW). No additional sums will be payable due to any escalation in the cost of materials, equipment, or labor, or because of the Contractor’s failure to properly estimate or accurately predict the prices or difficulty of achieving the results required by this contract. Nor will the contract price be adjusted on account of fluctuations in the currency exchange rates. The firm fixed price shall include the equipment, pre-delivery inspection, certificates of origin, operator’s manuals, warranty certificates and any other documentation mandated by the destination country.

IV. VALUE ADDED TAX

VALUE ADDED TAX. Value Added Tax (VAT) is not included in the CLIN rates. Instead, it will be priced as a separate Line Item in the proposal.

CONTINUATION TO SF-1449,

RFQ NUMBER 19GT5026Q0054

SCHEDULE OF SUPPLIES/SERVICES, BLOCK 20

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

1. TECHNICAL SPECIFICATIONS

The Contractor shall deliver four (4) prefabricated modular steel detention housing units suitable for maximum-security correctional or detention environments to the U.S. Government. Each unit shall be designed for two-person occupancy and shall include, at minimum, detention-grade sleeping, sanitation, seating, writing, lighting, plumbing, door and security hardware, utility access provisions, HVAC interface preparation, and fire sprinkler/fire suppression interface preparation.

1.1 SCOPE BOUNDARIES

In the event of non-compliance with the specifications or delivery of damaged or incorrect supplies, the U.S. Government reserves the right to reject the non-compliant items and require replacement at no additional cost.

The Contractor's scope of work is limited to fabrication, factory preparation, packaging, and delivery to the designated Miami, Florida delivery location. The following are expressly outside the Contractor's scope:

• Export from the United States

• Ocean freight and international shipping

• Import into Guatemala, including customs clearance

• Inland transportation within Guatemala

• Site preparation and foundation work

• Unit installation and anchoring

• Final utility connections (plumbing, electrical, HVAC, fire suppression)

• Final commissioning and operational testing

These activities will be managed separately through other Government-directed mechanisms.

Any equipment provided under this offer shall be new, not refurbished.

2. QUANTITY AND UNIT CONFIGURATION

2.1 QUANTITY

The Contractor shall provide four (4) complete prefabricated modular steel detention housing units.

2.2 UNIFORMITY

The Contractor shall provide four (4) complete prefabricated modular steel detention housing units.

2.3 OCCUPANCY

Each unit shall be designed and documented for two-person occupancy in a maximum-security detention environment.

3. DELIVERY REQUIREMENTS

3.1 DELIVERY LOCATION

The Contractor shall deliver all four units to a designated port, warehouse, or freight-forwarding facility in Miami, Florida. The specific delivery address will be provided to the Contractor by the COR no later than ten (10) calendar days after contract award.

3.2 DELIVERY TIMELINE

The Contractor shall deliver all four units to the designated Miami delivery location within 30 calendar days after contract award.

3.3 DELIVERY SCHEDULE SUBMISSION

Within five (5) calendar days after award, the Contractor shall submit a production (if needed) and delivery schedule to the COR identifying:

• Fabrication start date (if needed)

• Fabrication completion date (if needed)

• Quality control inspection date

• Packaging and preparation date

• Estimated ship date to Miami

• Estimated delivery date to Miami

The COR shall review and acknowledge the schedule within five (5) business days. Schedule deviations of more than five (5) calendar days shall be reported to the COR immediately with a written explanation and revised schedule.

3.4 DELIVERY COSTS

The quoted price shall include all costs associated with fabrication, factory preparation, packaging, handling, loading, and delivery to the designated Miami location. Costs beyond the Miami delivery point are not the Contractor's responsibility under this contract.

3.5 DELIVERY NOTIFICATION

The Contractor shall provide the COR with written advance notice of delivery no later than five

(5) business days prior to the scheduled delivery date, including the carrier name, tracking information, estimated arrival time, and unit count.

4. MINIMUN UNIT CONFIGURATION

Each unit shall include, at minimum, the following components. All components shall be detention-grade, tamper-resistant, and suitable for maximum-security correctional use:

Item Requirement Sleeping Two (2) fixed detention-grade bunks Sanitation One (1) detention-grade toilet/sink combination fixture Seating Two (2) fixed wall-mounted or securely anchored detention-grade seats Writing Surface One (1) fixed wall-mounted detention-grade desk or writing surface Door Assembly One (1) reinforced detention-grade door and frame assembly Locking Hardware Detention-grade locking hardware suitable for maximum-security use Observation Panel Observation panel with security glazing or equivalent impact-resistant transparent material Interior Lighting Detention-grade interior lighting fixtures Plumbing Provisions Internal plumbing provisions for water supply, waste, and vent connection HVAC Preparation Interface provisions for future HVAC or ventilation connection Fire Suppression Preparation

Interface provisions for future fire sprinkler or fire suppression connection

Utility Maintenance Access

Secure maintenance access without requiring entry into the occupant area

Stackable Design Engineered and documented for stackable or multi-level modular deployment

Warranty Minimum one (1) year warranty covering defects in materials and workmanship

Factory Documentation Complete handling, lifting, anchoring, installation, utility connection, and O&M documentation

4.1 PERFORMANCE STANDARD

• Quality Standards: All supplies must be brand new, factory-sealed, and original from the manufacturer. Refurbished, open-box, or third-party modified supplies will be rejected in its entirety.

• All supplies meet the specifications are free from defects or damage.

5. MANDATORY TECHNICAL REQUIREMENTS

5.1 MAXIMUN-SECURITY SUITABILITY

Each unit shall be suitable for maximum-security detention use. The unit design shall actively resist:

• Tampering and forced abuse by occupants

• Corrosion and moisture degradation

• Intensive cleaning and disinfection chemical exposure

• Contraband concealment through seams, gaps, voids, or removable components

• Unauthorized removal of fixtures, furnishings, or hardware

• Ligature attachment points on all interior surfaces, fixtures, and hardware

The Contractor shall provide technical documentation — such as product specifications, prior installation references, certifications, or equivalent evidence — demonstrating that the proposed units have been designed for, or are suitable for, correctional, detention, custodial, jail, prison, or secure holding environments.

5.2 CONSTRUCTION AND MATERIALS

Each unit shall be constructed primarily of steel or equivalent detention-grade metal materials suitable for secure custodial use.

The Contractor shall identify and document:

• Primary materials for walls, ceiling, floor, structural frame, and door

• Corrosion-protection method and coating system

• Interior finish system (see Section 5.11)

• Unit weight (empty, fully equipped)

• Exterior dimensions (length × width × height)

• Interior usable dimensions (length × width × clear height)

• Lifting and anchoring requirements

Minimum Interior Dimension Guidance: Each unit shall provide sufficient interior usable space to accommodate two-person occupancy with the required furnishings and fixtures in a manner consistent with humane detention standards. Offerors shall clearly document interior usable dimensions for Government review.

5.3 STACKABLE DESIGN

Each unit shall be designed and structurally engineered to support stackable installation or multi-level modular deployment.

The Contractor shall provide documentation identifying:

• Maximum stacking configuration (number of levels)

• Required support conditions (slab, platform, grade beam, or equivalent)

• Lifting and rigging point locations and rated capacities

• Anchoring or inter-unit connection requirements

• Structural load ratings and limitations

• Any support structure, intermediate framing, or platform required to be provided by others

5.4 BUNKS, DESK AND SEATING

Each unit shall include two (2) fixed detention-grade bunks, one (1) fixed desk or writing surface, and two (2) fixed seats.

All furnishings shall be:

• Tamper-resistant and securely mounted to the unit structure

• Suitable for high-abuse detention environments

• Free of unnecessary sharp edges, removable components, ligature attachment points, and contraband concealment areas

• Constructed of steel or equivalent detention-grade material consistent with the unit's overall construction

5.5 TOILET/SINK COMBINATION FIXTURE

Each unit shall include one (1) detention-grade toilet/sink combination fixture.

The fixture shall be:

• Corrosion-resistant and tamper-resistant

• Suitable for maximum-security detention use

• Constructed of stainless steel or equivalent detention-grade material

• Equipped with internal plumbing provisions necessary for connection to water supply, waste, and vent systems by others

The Contractor shall identify connection point locations, pipe sizes, and any field work required by others for final utility connection.

5.6 DOOR, FRAME, LOCKING HARDWARE AND OBSERVATION PANEL

Each unit shall include a complete detention-grade door and frame assembly suitable for maximum-security correctional use.

The door assembly shall include, at minimum:

• Reinforced detention-grade door panel

• Reinforced door frame with appropriate anchorage provisions

• Detention-grade locking hardware

• Observation panel with security glazing or equivalent impact-resistant transparent material

• Hinges, strike plate, frame reinforcement, and all hardware required for a complete, functional detention-grade door assembly

The Contractor shall clearly identify:

• Locking hardware type and manufacturer

• Operation method (manual, key, remote-ready, or equivalent)

• Keying and control requirements

• Any field work required by others for final door hardware installation or integration

All door hardware shall be ligature-resistant to the maximum extent practicable consistent with maximum-security detention design standards.

5.7 UTILITY ACCESS AND MANTENANCE

Each unit shall provide a secure, readily accessible method for maintenance personnel to access plumbing and utility connections without requiring unnecessary entry into the secure occupant area.

Acceptable configurations include, but are not limited to:

• Rear utility chase

• Side utility chase

• Secure service panel accessible from outside the occupant area

• External utility compartment

• Service corridor interface

• Equivalent manufacturer-standard maintenance-accessible design

The Contractor shall document the maintenance access configuration, access point locations, and any tools or procedures required for routine maintenance access.

5.8 ELECTRICAL AND LIGHTING

Each unit shall include detention-grade interior lighting.

Electrical systems shall be compatible with U.S. electrical standards (120V/60Hz).

The Contractor shall identify and document:

• Voltage and amperage requirements

• Lighting fixture type and lumen output

• Fixture protection method (tamper-resistant cover, recessed, security-grade housing, or equivalent)

• Electrical connection point locations

• Any field work required by others for final electrical connection

All lighting fixtures shall be tamper-resistant and ligature-resistant, recessed or flush-mounted where practicable, and suitable for high-abuse detention environments.

5.9 HVAC PREPARATION

HVAC or mechanical ventilation equipment is not required to be included in the unit.

Each unit shall be prepared for future HVAC or ventilation interface through grilles, sleeves, duct openings, penetrations, connection points, or equivalent manufacturer-standard provisions.

The Contractor shall identify:

• HVAC interface provision locations

• Opening or penetration sizes

• Assumptions regarding HVAC system type

• Any field work required by others for final HVAC connection

5.10 FIRE SPRINKLER / FIRE SUPPRESSION PREPARATION

Fire sprinkler or fire suppression equipment is not required to be fully installed within the unit.

Each unit shall be prepared for future connection to a fire sprinkler or fire suppression system.

The Contractor shall identify:

• Connection point locations and pipe sizes

• Penetration locations and sizes

• Assumptions regarding fire suppression system type

• Any field work required by others for final fire suppression connection

5.11 INTERIOR FINISH

Interior surfaces shall be durable, cleanable, moisture-resistant, corrosion-resistant, and suitable for high-abuse detention environments.

The finish system shall demonstrably resist:

• Abrasion and impact damage

• Moisture infiltration and standing water exposure

• Cleaning chemicals and institutional disinfectants

• Mold and bacterial growth

• Peeling, delamination, and corrosion

• Contraband concealment through seams, gaps, cracks, or pick points

Acceptable finish systems include, but are not limited to: polyurea coating, epoxy coating, powder coating, galvannealed steel with protective coating, stainless steel, or equivalent systems. Offerors shall document the proposed finish system and provide evidence of suitability for detention or high-abuse institutional environments.

5.12 WARRANTY

The Contractor shall provide a minimum one (1) year warranty covering defects in materials and workmanship for all four units.

The warranty period shall commence upon Government acceptance at the Miami delivery location, as documented by a signed Delivery Acceptance Record (see Section 7).

The Contractor shall provide written warranty documentation identifying:

• Warranty coverage scope

• Warranty period start and end dates

• Warranty claim procedures

• Contractor point of contact for warranty claims

• Any warranty exclusions or limitations

6. DOCUMENTATION REQUIREMENTS

The Contractor shall deliver the following documentation with each unit (or as a single package covering all four units where applicable):

Document Requirement Technical Drawings Plan, elevation, and section drawings showing exterior dimensions, interior layout, structural framing, and component locations Materials and Finish Specifications

Complete material specifications for all structural, finish, fixture, and hardware components

Lifting and Rigging Instructions

Rigging point locations, rated capacities, and recommended lifting procedures

Anchoring and Installation Instructions

Anchoring requirements, connection details, and installation sequence guidance

Utility Connection Details

Plumbing, electrical, HVAC, and fire suppression connection point locations, sizes, and field work requirements

Stackability Documentation

Maximum stacking configuration, structural requirements, and inter-unit connection details

Operations and Maintenance (O&M) Manual

Routine maintenance procedures, recommended maintenance intervals, and spare parts identification

Warranty Documentation

Written warranty terms per Section 5.12

Export Compliance Documentation

Contractor shall identify any export control classifications (EAR/ITAR) applicable to the units or components and provide relevant documentation to support U.S. Government export processing

All documentation shall be provided in English. Spanish translations, if provided, are supplementary and do not supersede English documentation.

7. INSPECTION AND ACCEPTANCE

7.1 DELIVERY INSPECTION

Upon delivery to the Miami location, the Government or its designated representative shall conduct a delivery inspection to verify:

• Quantity (four units delivered)

• Visible condition (no shipping damage, missing components, or visible defects)

• Documentation package completeness

7.2 DELIVERY ACCEPTANCE RECORD

Upon satisfactory delivery inspection, the COR or designated Government representative shall execute a Delivery Acceptance Record documenting:

• Date of delivery

• Unit serial numbers or identification markings

• Condition at delivery

• Documentation received

• Warranty commencement date

7.3 PREPARATION FOR DELIVERY

• All materials shall be new, unused, and in good condition.

• Materials shall be properly packaged and secured for international shipment.

• All pallets and wooden packing materials shall comply with ISPM 15 international shipping standards.

Cargo not following these instructions, may be refused. The U.S. Government shall not be liable for re-delivery, re-shipping, re-stocking, or related costs.

7.4 GENERAL DELIVERY CONDITIONS

• Contractor shall provide the total weight of all items included in the quotation

• All materials shall be delivered in new, unused, and undamaged condition.

• The Contractor shall coordinate delivery scheduling with the designated COR.

• Delivery receipts or packing lists shall be provided for all shipments.

• The Contractor shall be responsible for all transportation, handling, and delivery costs to the designated delivery point.

7.3 REJECTION

If any unit fails the delivery inspection due to damage, missing components, or non-conformance with the SOW, the Government shall notify the Contractor in writing within five (5) business days.

The Contractor shall propose a corrective action plan within five (5) business days of notification.

8. CUSTOMS CLEARANCE AND TAX EXEMPTIONS

The Contractor shall comply with all shipping and delivery instructions outlined in No. 7.2 Delivery Acceptance Record.

SECTION 2 - CONTRACT CLAUSES

52.212-4 CONTRACT TERMS AND CONDITIONS – COMMERCIAL ITEMS

(NOV 2023) IS INCORPORATED BY REFERENCE. (SEE SF-1449,

BLOCK 27A)

FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services (JAN 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

__ (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

_X_ (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (6) [Reserved].

__ (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

https://www.acquisition.gov/far/52.203-19#FAR_52_203_19 https://www.acquisition.gov/far/52.204-23#FAR_52_204_23 https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.acquisition.gov/far/52.209-10#FAR_52_209_10 https://www.acquisition.gov/far/52.232-40#FAR_52_232_40 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section3903&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section3903&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title10-section3801&num=0&edition=prelim https://www.acquisition.gov/far/52.233-3#FAR_52_233_3 https://www.acquisition.gov/far/52.233-4#FAR_52_233_4 https://www.acquisition.gov/far/52.203-6#FAR_52_203_6 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title10-section4655&num=0&edition=prelim https://www.acquisition.gov/far/52.203-13#FAR_52_203_13 https://www.acquisition.gov/far/52.203-15#FAR_52_203_15 https://www.acquisition.gov/far/52.203-17#FAR_52_203_17 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section4712&num=0&edition=prelim https://www.acquisition.gov/far/3.900#FAR_3_900 https://www.acquisition.gov/far/52.204-10#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.204-14#FAR_52_204_14

__ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

_X_ (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

__ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) ( Pub. L. 115–390, title II).

_X_ (11) (i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders— Prohibition. (Dec 2023) ( Pub. L. 115–390, title II).

__ (ii) Alternate I (Dec 2023) of 52.204-30.

_X_ (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Jan 2025) ( 31 U.S.C. 6101 note).

__ (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) ( 41 U.S.C. 2313).

__ (14) [Reserved].

__ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) ( 15 U.S.C. 657a).

__ (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (17) [Reserved] __ (18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-6.

__ (19) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-7.

__ (20) 52.219-8, Utilization of Small Business Concerns (Jan 2025)( 15 U.S.C. 637(d)(2) and (3)).

__ (21) (i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) ( 15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Nov 2016) of 52.219-9.

__ (iii) Alternate II (Nov 2016) of 52.219-9.

__ (iv) Alternate III (Jun 2020) of 52.219-9.

__ (v) Alternate IV (Jan 2025) of 52.219-9.

__ (22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

__ (ii) Alternate I (Mar 2020) of 52.219-13.

__ (23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 657s).

__ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

__ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran- Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657f).

__ (26) (i) 52.219-28, Postaward Small Business Program Representation (Jan 2025) (15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (Mar 2020) of 52.219-28.

__ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

https://www.acquisition.gov/far/52.204-15#FAR_52_204_15 https://www.acquisition.gov/far/52.204-27#FAR_52_204_27 https://www.acquisition.gov/far/52.204-28#FAR_52_204_28 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.acquisition.gov/far/52.209-6#FAR_52_209_6 https://www.govinfo.gov/link/uscode/31/6101 https://www.acquisition.gov/far/52.209-9#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/52.219-3#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/52.219-4#FAR_52_219_4 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 https://www.acquisition.gov/far/52.219-8#FAR_52_219_8 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637&num=0&edition=prelim https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637&num=0&edition=prelim https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 https://www.acquisition.gov/far/52.219-14#FAR_52_219_14 https://www.acquisition.gov/far/52.219-16#FAR_52_219_16 https://www.acquisition.gov/far/52.219-27#FAR_52_219_27 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 https://www.acquisition.gov/far/52.219-29#FAR_52_219_29

__ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

__ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) ( 15 U.S.C. 644(r)).

__ (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) ( 15 U.S.C. 637(a)(17)).

__ (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

_X_ (32) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2025)( E.O.

13126).

_X_ (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X_ (34) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

__ (ii) Alternate I (Feb 1999) of 52.222-26.

__ (35) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) ( 38 U.S.C. 4212).

__ (ii) Alternate I (Jul 2014) of 52.222-35.

__ (36) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) ( 29 U.S.C. 793).

__ (ii) Alternate I (Jul 2014) of 52.222-36.

__ (37) 52.222-37, Employment Reports on Veterans (Jun 2020) ( 38 U.S.C. 4212).

__ (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

_X_ (39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (40) 52.222-54, Employment Eligibility Verification (Jan 2025) ( Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

__ (41) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) ( 42 U.S.C. 7671, et seq.).

__ (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) ( 42 U.S.C. 7671, et seq.).

__ (44) 52.223-20, Aerosols (May 2024) ( 42 U.S.C. 7671, et seq.).

__ (45) 52.223-21, Foams (May 2024) ( 42 U.S.C. 7671, et seq.).

__ (46) 52.223-23, Sustainable Products and Services (May 2024) ( E.O. 14057, 7 U.S.C.

8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

__ (47) (i) 52.224-3 Privacy Training (Jan 2017) ( 5 U.S.C. 552 a).

__ (ii) Alternate I (Jan 2017) of 52.224-3.

__ (48) (i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

__ (ii) Alternate I (Oct 2022) of 52.225-1.

__ (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) ( 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C.

https://www.acquisition.gov/far/52.219-30#FAR_52_219_30 https://www.acquisition.gov/far/52.219-32#FAR_52_219_32 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section644&num=0&edition=prelim https://www.acquisition.gov/far/52.219-33#FAR_52_219_33 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637&num=0&edition=prelim https://www.acquisition.gov/far/52.222-3#FAR_52_222_3 https://www.acquisition.gov/far/52.222-19#FAR_52_222_19 https://www.federalregister.gov/executive-order/13126 https://www.federalregister.gov/executive-order/13126 https://www.acquisition.gov/far/52.222-21#FAR_52_222_21 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 https://www.acquisition.gov/far/52.222-37#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-40#FAR_52_222_40 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 https://www.acquisition.gov/far/52.222-54#FAR_52_222_54 https://www.federalregister.gov/executive-order/12989 https://www.acquisition.gov/far/22.1803#FAR_22_1803 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 https://www.acquisition.gov/far/52.223-11#FAR_52_223_11 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section7671&num=0&edition=prelim https://www.acquisition.gov/far/52.223-12#FAR_52_223_12 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section7671&num=0&edition=prelim https://www.acquisition.gov/far/52.223-20#FAR_52_223_20 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section7671&num=0&edition=prelim https://www.acquisition.gov/far/52.223-21#FAR_52_223_21 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section7671&num=0&edition=prelim https://www.acquisition.gov/far/52.223-23#FAR_52_223_23 https://www.federalregister.gov/executive-order/14057 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title7-section8102&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title7-section8102&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section6962&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section8259&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section7671&num=0&edition=prelim https://www.acquisition.gov/far/52.224-3#FAR_52_224_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title5-section552&num=0&edition=prelim https://www.acquisition.gov/far/52.224-3#FAR_52_224_3 https://www.acquisition.gov/far/52.225-1#FAR_52_225_1 https://www.acquisition.gov/far/52.225-1#FAR_52_225_1 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section3301&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section3301&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section2112&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section3805&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section4001&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title19-chapter29&saved=%7CZ3JhbnVsZWlkOlVTQy1wcmVsaW0tdGl0bGU0MC1jaGFwdGVyMzctZnJvbnQ%3D%7C%7C%7C0%7Cfalse%7Cprelim&edition=prelim chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109- 53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I [Reserved].

__ (iii) Alternate II (Jan 2025) of 52.225-3.

__ (iv) Alternate III (Feb 2024) of 52.225-3.

__ (v) Alternate IV (Oct 2022) of 52.225-3.

_X_ (50) 52.225-5, Trade Agreements (NOV 2023) ( 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

__ (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

__ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

__ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

_X_ (55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) ( E.O. 13513).

__ (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

_X_ (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

__ (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

_X_ (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) ( 31 U.S.C. 3332).

__ (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

__ (61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

__ (62) 52.239-1, Privacy or Security Safeguards (Aug 1996) ( 5 U.S.C. 552a).

_X_ (63) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L.

118-31, 41 U.S.C. 3901 note prec.).

__ (64) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

__ (65) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) ( 46 U.S.C. 55305 and 10 U.S.C. 2631).

__ (ii) Alternate I (Apr 2003) of 52.247-64.

__ (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

__ (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

__ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title19-chapter29&saved=%7CZ3JhbnVsZWlkOlVTQy1wcmVsaW0tdGl0bGU0MC1jaGFwdGVyMzctZnJvbnQ%3D%7C%7C%7C0%7Cfalse%7Cprelim&edition=prelim https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://www.acquisition.gov/far/52.225-5#FAR_52_225_5 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section2501&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section3301&num=0&edition=prelim https://www.acquisition.gov/far/52.225-13#FAR_52_225_13 https://www.acquisition.gov/far/52.225-26#FAR_52_225_26 https://www.acquisition.gov/far/52.226-4#FAR_52_226_4 https://www.acquisition.gov/far/52.226-5#FAR_52_226_5 https://www.acquisition.gov/far/52.226-8#FAR_52_226_8 https://www.federalregister.gov/executive-order/13513 https://www.acquisition.gov/far/52.229-12#FAR_52_229_12 https://www.acquisition.gov/far/52.232-29#FAR_52_232_29 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title10-section3805&num=0&edition=prelim https://www.acquisition.gov/far/52.232-30#FAR_52_232_30 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title10-section3805&num=0&edition=prelim https://www.acquisition.gov/far/52.232-33#FAR_52_232_33 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section3332&num=0&edition=prelim https://www.acquisition.gov/far/52.232-34#FAR_52_232_34 https://www.acquisition.gov/far/52.232-36#FAR_52_232_36 https://www.acquisition.gov/far/52.239-1#FAR_52_239_1 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title5-section552a&num=0&edition=prelim https://www.acquisition.gov/far/52.240-1#FAR_52_240_1 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section3901&num=0&edition=prelim https://www.acquisition.gov/far/52.242-5#FAR_52_242_5 https://www.acquisition.gov/far/52.247-64#FAR_52_247_64 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title46-section55305&num=0&edition=prelim https://www.acquisition.gov/far/52.247-64#FAR_52_247_64 https://www.acquisition.gov/far/52.247-64#FAR_52_247_64 https://www.acquisition.gov/far/52.222-41#FAR_52_222_41 https://www.acquisition.gov/far/52.222-42#FAR_52_222_42

__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

__ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

__ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

__ (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

__ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

__ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

__ (10) 52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (Jan 2025) ( 49 U.S.C. 40118(g)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make…