Attachment 8_ Specs of Current Dish.pdf

TYPE 243: 2.4m C-Band Linear RT/TX Class III Antenna System

S a t c o m s o l u t i o n s f o r t h e l o n g h a u l

All designs, specification and availabilities of products and services presented in this bulletin are subject to change without notice. ©2014 Skyware Global 1315 Outlet Center Drive, Smithfield, NC 27577 T + 1 919 934 9711 F + 1 919 989 2274 Sales @ Skyware Global.com

REV 03/15-01

P R O D U C T

S P E C I F I C A T I O N S

The Skyware Global Type 243 2.4 m

Class III Rx/Tx Antenna is a rugged commercial grade product suitable for the most demanding applications. The two-piece reflector is thermoset-molded for strength and surface accuracy. Molded into the rear of each reflector half is a network of support ribs which not only strengthens the antenna, but also helps to sustain the critical parabolic shape necessary for transmit performance.

The Az/El mount is constructed from heavy-gauge steel to provide a rigid sup-port to the reflector and feed support arm.

Heavy-duty lockdown bolts secure the mount to any 168 mm (6.63”) O.D. mast and prevent slippage in high winds.

Hot-dip galvanizing is standard on this model for maximum environmental protection.

• All materials comply with EU directive No. 2002/95/EC (RoHS).

• Two-piece precision offset thermoset-molded reflector.

• Heavy-duty galvanized Az/El mount.

• Fine Azimuth and elevation adjustments.

• Galvanized support arm and alignment struts.

• Factory pre-assembled mount.

• RF tested feed assembly.

• Heavy-duty Class III mount for 11 kg (25 lb) RF electronics (LNB & BUC)

Detail Photos

(on right from top to bottom)

Heavy-duty galvanized Az/El Mount

Fine azimuth and elevation adjustments

RF tested C-band Linear Polarized feed assembly

The two-piece reflector is thermoset-molded for strength and surface accuracy.

2.4 m C-band Linear Rx/Tx Class III Antenna System • P R O D U C T S P E C I F I C A T I O N S

RF Performance

Efffective Aperture . . . . . . . . . . . . . . . . . . . . . 2.4m (96 in)

Operating Frequency TX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.850 - 6.725 GHz RX. . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 3.400 - 4.200 GHz

Polarization . . . . . . . . . . . . . . . . . . . . .Linear, Orthogonal

Gain (±0.3 dB) TX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.0 dBi @ 6.1GHz RX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38.0 dBi @ 3.9GHz

3 dB Beamwidth TX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3° @ 6.1 GHz RX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.1° @ 3.9 GHz

Sidelobe Envelope (Tx, Co-Pol dBi) 2.5°< q <20° . . . . . . . . . . . . . . . . . . . . . . . . 29-25 log q 20° < q< 26.3° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -3.5 26.3°< q <48° . . . . . . . . . . . . . . . . . . . . . . . 32-25 log q 48°< q <180° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-3.5

Antenna Cross-Polarization. . . . . . . . . . 30 db (On Axis)

Antenna Noise Temperature 10° EL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40K° 20° EL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35K° 30° EL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32K°

VSWR

Tx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3:1 Rx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5:1

Isolation(Port to Port) Tx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 dB Rx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 dB

Feed Interface Tx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type N or CPR-137 Rx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CPR-229

(All specifications typical)

Mechanical Performance

Reflector Material. . . . . . . .Glass Fiber Reinforced Polyester

Antenna Optics . . . . . . . .Two-Piece Offset Feed Prime Focus

Mount Type . . . . . . . . . . . . . . . . . . . . . Elevation Over Azimuth

Elevation Adjustment Range . . . . . . . . . 10° - 90° Continuous Fine Adjustment

Azimuth Adjustment Range . . . . . . 360° Continuous; ± 12° Fine Adjustment

Mast Pipe Interface. . . . . . . . . . . .6.63 in (168 mm) Diameter

Enviromental Performance

Wind Loading

Operational . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 mph (80 km/h)

Survival . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 mph (200 km/h)

Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -50°C to +80°C

Humidity. . . . . . . . . . . . . . . . . . . . . . . . .0 to 100% (Condensing)

Atmosphere. . . . . . . . . . . . . . .Standard Hardware Meets 500 Hrs SST Requirements (ASTM B-117)

Solar Radiation . . . . . . . . . . . . . . . . . . . . . . . . . . . .360 BTU/h/ ft2

Shock and Vibration. . . . . . . . . . . . . . . As Encountered during Shipping and handling

All designs, specification and availabilities of products and services presented in this bulletin are subject to change without notice. ©2014 Skyware Global 1315 Outlet Center Drive, Smithfield, NC 27577 T + 1 919 934 9711 F + 1 919 989 2274 Sales @ Skyware Global.com

S a t c o m s o l u t i o n s f o r t h e l o n g h a u l

REV 03/15-01