18Q0111_-_Attachment_1_-_Revision_01.pdf

19AQMM18Q0111 – ATTACHMENT 1 – 9 AUGUST 2018 – 9 AUGUST 2018

SOLICITATION 19AQMM18Q0111

ATTACHMENT 1 – REVISION 01 – 9 AUGUST 2018

STATEMENT OF WORK (SOW) / SPECIFICATIONS

1. BACKGROUND

The mission of the Bureau of International Narcotics and Law Enforcement (INL) is to minimize the impact of international crime and illegal drugs on the United States, its citizens, and partner nations by providing effective foreign assistance and by fostering global cooperation. A key component of this mission in Colombia is assisting the Colombian Navy (COLNAV) establish capable and effective maritime and riverine drug interdiction operations. INL has identified a need to re-equip and re-supply the COLNAV 4th Marine Brigade’s riverine interdiction assets. The 4th Marine Brigade is currently providing riverine operational support to joint TF Hercules in the Narino Department.

2. TECHNICAL SPECIFICATIONS

Line # Description QTY

EVINRUDE OUTBOARD ENGINE E-TEC C175PX G2,

MODEL: 2018 - C175PX

Motor Generation G2 with the following specifications:

1) Power: 175 HP.

2) Engine type: V6 de 66º E-TEC D.I.

3) Bore x Stroke: 3.386 x 3.100 in. (86 x 78.7mm.)

4) Displacement: 2744cc (2.7 liters)

5) Gear Ratio: 2, 17:1.

6) Full Throttle rpm range: 5000-6000rpm.

7) Weight: 507lbs (230kg.)

8) Starting: Electronic

9) Controls: Integrated digital shift & throttle Ref: ICOM II

10) Fuel Induction – E-TEC direct injection w/stratified low rpm, combustion mode

11) Alternator Output – 133Amps total/50 net dedicated/14Amps

@ IDLE

12) Steering – Remote

13) Trim range: -6º to 15º

14) Tilt range: 75º

15) Shaft length: 25” (635mm)

16) Lubrication: Multi-point targeted oiling

17) Emissions Compliance: EPA 2013/carb 3 star/European union.

18) Mounting Centers: Minimum 26 in (660 mm)

32 EA

19) Steering Angle - +/- 30º

20) Integrated Features: Dual axis rigging, i-trim

21) Color: Camouflage vegetation EVINRUDE

Every two engines shall be delivered with a kit containing the following items:

1) Two (2) Stainless steel propeller: 15 ½ X 17 RH. 0763986

2) Two (2) Fuel hose: REF: EPA-NAT-LEAP II 3/8” HP 900 – 100517 – SAE J30R9. Dimensions: 3/8” Diameter X 10FT Length.

3) Two (2) Operating manual

4) Two (2) Warranty certificate

5) Two (2) Anchorage kit (Composed by four transom mounting bolts. Dimensions: ½” Diameter X 5” Length).

6) One (1) Kit hydraulic steering system Ref SEASTAR.

7) One (1) Tie bar kits

8) One (1) Icon digital display 7.0 inch 0769942

9) One (1) “Y” harness 0587230

10) One (1) Kit, off/on-2 eng. 0768748

11) One (1) Dual binnacle mount remote control 5010513

12) One (1) Fuel tank sender

13) One (1) Cable extension 10ft. 0587179

14) One (1) Cable ay, batt 20ft- 0587302

15) Two (2) External 10-gallon oil tank

NOTE: The engines will be installed as twins. That is to say, two engines will be installed per boat.

EVINRUDE OUTBOARD ENGINE E-TEC E90DPX,

MODEL: 2017 or 2018 – E90DPX G1

Motor Generation G1 with the following specifications:

1) Power 90 HP

2) Engine type in-line cylinder , two – clycle.

3) Shaft length 25 inch

4) Weight 152 kg.

5) Full throttle rpm range: 4500-5500rpm.

6) Electrical starting.

7) Remote control.

8) Full inyección directa e-tec.

9) Alternator output 25amps fully regulated.

10) Steering system hydraulic.

11) Breaker FastTrack.

12) Gear ratio 2,25:1

16 EA

13) Monitoring system. Ref: ICOM

14) Color: White

Every two engines shall be delivered with a kit containing the following items:

1) Two (2) Stainless steel propeller: 14 ¾” X 17” 0763914

2) One (1) Dual engine key and stop switch. Kit AY 2IGN&C/O

SW 0176410

3) One (1) Dual lever binnacle. RC AY BIN-2LVR WT 5006184

4) One (1) Hydraulic steering kit Ref SEASTAR 6400A-3.

5) One (1) Tie bar kit

6) One (1) Control cables xtreme CCX20524

7) One (1) Control cables xtreme CCX20522

8) Two (2) Fuel hose: P/N 5008585. REF: EPA-NAT-LEAP II 3/8” HP 900 – 100517 – SAE J30R9. Dimensions: 3/8” Diameter X 10FT Length

9) Two (2) operating manual

10) Two (2) Warranty certificate

11) Two (2) Anchorage kit (Composed by four transom mounting bolts. Dimensions: ½” Diameter X 5” Length).

12) One (1) Kit TACH 4” PROWHT. 0768008

13) One (1) Kit speed 80mph-wt. 0768056

14) One (1) Fluid level converter, one fuel tank. 0768452

15) One (1) Speed / fuel economy kit 0764315

16) One (1) Terminator kit. 0764155

17) One (1) 25-foot network buss extension cable 0764163

18) One (1) Multiple engine power supply kit. 0764159

19) Two (2) 15-foot harness kit 0766026

20) One (1) Ignition/ TNT harness two engines 25 foot. 0763549.

NOTE: The engines will be installed as twins. That is to say, two engines will be installed per boat.

003 Refer to Description in SF-1449 3 EA

3. DELIVERY TERMS

FOB Destination. Contractor shall be solely responsible to deliver all items described in this purchase order to the delivery location identified in block 15 of SF-1149. Colombian Navy (COLNAV) will provide transportation from INL Warehouse Bogota to Tumaco 4th Marine Brigade HQ (BRIM4) and will make the installation on the riverine interdiction boats.

Contractor shall package and transport outboard motors and accessories to prevent damage. The Contractor shall promptly replace, at no additional cost to the Government, any damaged or non-conforming items.

All shipments must be marked as follows:

INL Bogota – Outboard Motors PO Number: TDB ATTN: Jose Zuniga / Hugo Ortiz

All items must be delivered no later than seventy-five (75) calendar days after receipt of order.

Partial shipments are authorized and highly preferred.

4. WARRANTY

(a) The Contractor shall provide a warranty that is valid throughout Colombia.

(b) For warranty process, COLNAV will send to the Contractor, and copy the INL COR, a manufacturing defect report indicating the defective items and/or performance issues encountered.

The contractor shall pick-up, at no additional cost to the Government, the defective items covered udner warranty in the city of Tumaco, at the 4th Marine Brigade headquarters. The contractor shall replace or repair defective items and ship said items to the 4th Marine Brigade headquarters , at no additional cost to the Government, within forty (40) calendar days from receipt of COLNAV’s written notification of a defect(s). The contractor shall deliver replacement items to 4th Marine Brigade HQ in the city of Tumaco. The contractor shall be solely responsible for all costs (including but not limited to parts, labor, and shipping) incurred in complying with the terms of the warranty.

(c) Warranty Period

Line Item 001: Three (3) years or five hundred (500) hours of operation at first, whichever occurs first.

Line Item 002: One (1) year or three hundred and fifty (350) hours of operation, whichever occurs first.