C05_04__Attachment_3_-_Asbestos_Report_0001.pdf

PDF 2 MB Posted

Attached to
SRF Building Asbestos Abatement Federal contract opportunity
Solicitation number
140R2026Q0010
Issued by
Department of the Interior Bureau of Reclamation

About this file

This document is a laboratory asbestos analysis report from Mountain Laboratories for bulk samples submitted by the U.S. Bureau of Reclamation (USBR) - California on February 7, 2025. The analysis was performed for the Shasta Maintenance Center External Sample Project (Project #1) at 16349 Shasta Dam Boulevard, Shasta Lake, CA 96019. The testing method employed was 40 CFR, Part 763, Subpart E, Appendix E using Polarized Light Microscopy (PLM) supplemented by Dispersion Staining (PLM/DS). Mountain Laboratories holds NVLAP accreditation (Lab Code 101890-0) and is located in Spokane Valley, WA.

The report documents analysis results for 69 bulk samples (plus three sub-samples) collected from the Shasta Maintenance Center. Of the samples analyzed, asbestos was detected in 11 samples: samples 6, 7, 10, 11, 30, 32, 33, 34, 41, and 42 contained chrysotile asbestos at 3-5% concentration in gray layers, while sample 6 also showed 3-5% chrysotile. The remaining 58 samples tested negative for asbestos (N.D. - Not Detected). All samples were treated through teasing, crushing, and/or heating processes. The report includes detailed composition data for each sample, noting the presence of non-fibrous materials such as quartz, paint, aggregate, and other mineral content. Chain of custody documentation is provided, with all samples received and analyzed on February 7, 2025 by Laboratory Manager Heidi L. Porret. Mountain Laboratories disclaims responsibility for sample procurement and notes that negative or minimal PLM results should be confirmed with SEM or TEM analysis for greater certainty.

View the file

Other files for this federal contract opportunity

Other files attached to SRF Building Asbestos Abatement, newest first.
File Type Posted
Sol_140R2026Q0010_Amd_0001.pdf PDF
Sol_140R2026Q0010.pdf PDF
C05_04_140R2026Q0010_-_Solicitation_SRF_Bldg_Asbestos_Abatement.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

9922 East Montgomery Suite 13 TESTING

Spokane Valley, WA 99206 NVLAP LAB CODE 101890-0

(509) 922-1365 ● Fax (509) 922-1380

Polarized Light Microscopy, NVLAP Accreditation

February 7, 2025

USBR-California Project Name: Shasta Maintenance Center External Sample Project

Kelly DeLange Project #: 1

16349 Shasta Dam Boulevard

Shasta Lake, CA 96019

Dear Mr. DeLange, The enclosed report details results for the analysis of the bulk sample(s) submitted to Mountain

Laboratories on February 7, 2025. Sample analysis was performed to determine asbestos type and content using Polarized Light Microscopy, supplemented by Dispersion Staining (PLM/DS).

This report includes a summary of the analytical results and chain of custody. Analytical results are only reflective of the samples, which were tested and presented in this report. Mountain Laboratories limits warranty to proper analysis methods and takes no responsibility for sample procurement.

It has been our pleasure providing you with these analytical services. If you have any questions regarding this report, please do not hesitate to call us at (509) 922-1365.

Sincerely, Heidi L. Porret

Laboratory Manager

Mountain Laboratories

Mountain Laboratories NW, Inc.

Enclosure: 5084.4116.4184H

MOUNTAIN LABORATORIES

BULK SAMPLE ANALYSIS FOR ASBESTOS

Test Method: 40 CFR, Part 763, Subpart E, Appendix E Customer #: 5084

Laboratory No. B25-4116 B25-4117 B25-4118

Sample ID No. 1 2 3

Sample Description N/S N/S N/S

Sample Treatment Teased/Heated Teased/Heated Teased/Heated

Homogeneous Yes Yes Yes

Layered No No No

Fibrous No No No

Sample Color Gold/Off White Yellow/Gray Gray/Tan

Brown

Asbestos Present No No No

Asbestos Type and

Percentage

N.D. N.D. N.D.

Total % Asbestos None None None

Other Fibrous Material

In Sample

Non-Fibrous Material Other 100% Other 100% Other 100%

Date Analyzed: February 7, 2025 Analyzed By: Heidi L. Porret

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written approval by Mountain Laboratories. Soil/Dust samples are not covered under NVLAP Accreditation.

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4119 B25-4120 B25-4121

Sample ID No. 4 5 6

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated Teased

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No Yes Yes

Sample Color Beige/White Gray/Pale Yellow Pale Green/Brown

Gray

Asbestos Present No No Yes

Asbestos Type and

Percentage

N.D. Gray Layer N.D.

Pale Yellow Layer N.D.

Gray Layer

Chrysotile 3-5%

Total % Asbestos None None 3-5%

Other Fibrous Material

In Sample

Gray Layer:

Cellulose 35%

Synthetic 5%

Glass Fibers 3%

Non-Fibrous Material

Quartz 15%

Other 84%

Paint <1%

Gray Layer:

Other 60%

Pale Yellow Layer:

Other 100%

Other 92-94%

Paint not analyzed.

Thin Layer.

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4122 B25-4123 B25-4124

Sample ID No. 7 8 9

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated Teased/Heated

Teased/Crushed

Heated

Homogeneous No Yes No

Layered Yes No Yes

Fibrous Yes No No

Sample Color Pale Green/Brown

Gray Brown/Beige

Pale Green/Gray

Tan

Asbestos Present Yes No No

Asbestos Type and

Percentage

Gray Layer

Chrysotile 3-5%

N.D. N.D.

Total % Asbestos 3-5% None None

Other Fibrous Material

In Sample

Glass Fibers 3%

Non-Fibrous Material

Other 92-94%

Paint not analyzed.

Thin Layer.

Other 100% Quartz 15%

Other 75%

Aggregate 5%

Paint 5%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4125 B25-4126 B25-4127

Sample ID No. 10 11 12

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated Teased/Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous Yes Yes No

Sample Color Pale Green/Brown

Gray

Pale Green/Brown

Gray

Pale Green/Beige

Brown

Asbestos Present Yes Yes No

Asbestos Type and

Percentage

Gray Layer

Chrysotile 3-5%

Gray Layer

Chrysotile 3-5%

N.D.

Total % Asbestos 3-5% 3-5% None

Other Fibrous Material

In Sample

Glass Fibers 3% Glass Fibers 3%

Non-Fibrous Material

Other 92-94%

Paint not analyzed.

Thin Layer.

Other 92-94%

Paint not analyzed.

Other 100%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4128 B25-4129 B25-4130

Sample ID No. 13 14 15

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous Yes No No

Sample Color Pale Green/Gray

Beige

Pale Green/Gray

Beige White/Gray/Beige

Asbestos Present No No No

Asbestos Type and

N.D. N.D. White Layer N.D.

Gray Layer N.D.

Total % Asbestos None None None

Other Fibrous Material

In Sample

Wood <1%

Non-Fibrous Material

Quartz 10%

Other 29%

Aggregate 55%

Paint 5%

Quartz 5%

Other 24%

Aggregate 70%

Paint <1%

White Layer:

Quartz 20%

Other 75%

Quartz 65%

Other 34%

Paint <1%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4131 B25-4132 B25-4133

Sample ID No. 16 17 18

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated Teased/Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No No No

Sample Color Pale Green/Gray

Beige

Pale Green/Beige

Gray

Pale Green/Gray

Beige

Asbestos Present No No No

Asbestos Type and

Percentage

N.D. N.D. N.D.

Total % Asbestos None None None

Non-Fibrous Material

Quartz 20%

Other 64%

Aggregate 15%

Paint <1%

Other 100% Quartz 20%

Other 75%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4134 B25-101496 B25-4135

Sample ID No. 19 19-A 20

Sample Description N/S Sub Sample of 19

Top Layer N/S

Sample Treatment Teased/Crushed

Heated Teased/Heated Teased/Crushed

Homogeneous No No Yes

Layered Yes Yes No

Fibrous No Yes No

Sample Color Pale Green/Gray

Beige Beige/Off White Brown/Tan

Asbestos Present No No No

Asbestos Type and

Percentage

Gray Layer N.D. Top Layer N.D. N.D.

Total % Asbestos None None None

Other Fibrous Material

In Sample

Cellulose 5%

Non-Fibrous Material

Quartz 20%

Other 75%

Paint 5%

Other 85%

Paint 10%

Aggregate 99%

Other <1%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4136 B25-4137 B25-4138

Sample ID No. 21 22 23

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated Teased/Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No Yes No

Sample Color Pale Green/Gray

Beige

Pale Green/Beige

Gray/Silver

Pale Green/Gray

Beige

Asbestos Present No No No

Asbestos Type and

Percentage

N.D. N.D. N.D.

Total % Asbestos None None None

Other Fibrous Material

In Sample

Synthetic 5%

Non-Fibrous Material

Quartz 20%

Other 70%

Paint 10%

Other 95% Quartz 5%

Other 90%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4139 B25-4140 B25-4141

Sample ID No. 24 25 26

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No No No

Sample Color Pale Green/Gray

Beige

Pale Green/Gray

Beige White/Gray/Beige

Asbestos Present No No No

Asbestos Type and

Other 75%

Paint 5%

Quartz 5%

Other 65%

Aggregate 25%

Paint 5%

White Layer:

Quartz 20%

Other 75%

Quartz 40%

Other 55%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4142 B25-4143 B25-4144

Sample ID No. 27 28 29

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No No No

Sample Color Pale Green/Gray

Beige

Pale Green/Gray

Beige White/Gray/Beige

Asbestos Present No No No

Asbestos Type and

Quartz 10%

Other 40%

Aggregate 40%

Paint 10%

Quartz 10%

Other 85%

Paint 5%

White Layer:

Quartz 25%

Other 74%

Paint <1%

Aggregate 75%

Other 25%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4145 B25-101497 B25-4146

Sample ID No. 30 30-A 31

Sample Description N/S Sub Sample of 30

Gray Layer N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous Yes No No

Sample Color Pale Green/Brown

Gray

Pale Green/Gray

Beige

Pale Green/Gray

Beige

Asbestos Present Yes No No

Asbestos Type and

Percentage

Gray Layer

Chrysotile 3-5%

Gray Layer N.D. N.D.

Total % Asbestos 3-5% None None

Other 95-97%

Paint not analyzed.

Thin Layer.

Quartz 10%

Other 40%

Aggregate 40%

Paint 10%

Quartz 20%

Other 75%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4147 B25-101498 B25-4148

Sample ID No. 32 32-A 33

Sample Description N/S Sub Sample of 32

Gray Layer N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous Yes No Yes

Sample Color Pale Green/Brown

Gray

Pale Green/Gray

Beige

Pale Green/Brown

Gray

Asbestos Present Yes No Yes

Asbestos Type and

Percentage

Gray Layer

Chrysotile 3-5%

Gray Layer N.D. Gray Layer

Chrysotile 3-5%

Total % Asbestos 3-5% None 3-5%

Other Fibrous Material

In Sample

Glass Fibers 3%

Non-Fibrous Material

Other 95-97%

Paint not analyzed.

Thin Layer.

Quartz 10%

Other 40%

Aggregate 40%

Paint 10%

Other 92-94%

Paint not analyzed.

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4149 B25-4150 B25-4151

Sample ID No. 34 35 36

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous Yes Yes No

Sample Color Pale Green/Brown

Gray

Pale Green/Gray

Beige/Silver

Pale Green/Gray

Beige

Asbestos Present Yes No No

Asbestos Type and

Percentage

Gray Layer

Chrysotile 3-5%

N.D. N.D.

Total % Asbestos 3-5% None None

Other Fibrous Material

In Sample

Glass Fibers 3% Synthetic <1%

Non-Fibrous Material

Other 92-94%

Other 50%

Aggregate 20%

Paint 9%

Quartz 20%

Other 70%

Paint 10%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4152 B25-4153 B25-4154

Sample ID No. 37 38 39

Sample Description N/S N/S N/S

Sample Treatment Teased/Heated Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No No Yes

Sample Color Pale Green/Beige

Gray

Pale Green/Gray

Beige

Pale Green/Gray

Beige/Silver

Asbestos Present No No No

Asbestos Type and

Percentage

N.D. N.D. N.D.

Total % Asbestos None None None

Other Fibrous Material

In Sample

Synthetic <1%

Non-Fibrous Material

Other 100% Quartz 20%

Other 70%

Paint 10%

Quartz 10%

Other 74%

Paint 15%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4155 B25-4156 B25-4157

Sample ID No. 40 41 42

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No Yes Yes

Sample Color Pale Green/Gray

Beige

Pale Green/Brown

Gray

Pale Green/Brown

Gray

Asbestos Present No Yes Yes

Asbestos Type and

Percentage

N.D. Gray Layer

Chrysotile 3-5%

Gray Layer

Chrysotile 3-5%

Total % Asbestos None 3-5% 3-5%

Other Fibrous Material

In Sample

Glass Fibers 3% Glass Fibers 5%

Non-Fibrous Material

Quartz 10%

Other 80%

Paint 10%

Other 92-94%

Other 90-92%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4158 B25-4159 B25-4160

Sample ID No. 43 44 45

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous Yes No No

Sample Color Pale Green/Gray

Beige

Pale Green/Gray

Beige

Pale Green/Gray

Beige

Asbestos Present No No No

Asbestos Type and

Percentage

N.D. N.D. N.D.

Total % Asbestos None None None

Other 75%

Paint 15%

Quartz 20%

Other 70%

Paint 10%

Quartz 20%

Other 70%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4161 B25-4162 B25-4163

Sample ID No. 46 47 48

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated Teased/Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No No No

Sample Color Pale Green/Gray

Beige Pale Green/Beige

Pale Green/Gray

Beige

Asbestos Present No No No

Asbestos Type and

Percentage

N.D. N.D. N.D.

Total % Asbestos None None None

Other 70%

Paint 10%

Other 100% Quartz 20%

Other 70%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4164 B25-4165 B25-4166

Sample ID No. 49 50 51

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No No No

Sample Color Pale Green/Gray

Beige

Pale Green/Gray

Beige

Pale Green/Gray

Beige

Asbestos Present No No No

Asbestos Type and

Percentage

Gray Layer N.D. Gray Layer N.D. N.D.

Total % Asbestos None None None

Other 15%

Aggregate 15%

Paint 60%

Quartz 10%

Other 40%

Aggregate 40%

Paint 10%

Quartz 20%

Other 70%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4167 B25-4168 B25-4169

Sample ID No. 52 53 54

Sample Description N/S N/S N/S

Sample Treatment Teased/Heated Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No No No

Sample Color Pale Green/Beige Pale Green/Gray

Beige

Pale Green/Gray

Beige

Asbestos Present No No No

Asbestos Type and

Percentage

N.D. N.D. N.D.

Total % Asbestos None None None

Other 100% Quartz 20%

Other 70%

Paint 10%

Quartz 20%

Other 70%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4170 B25-4171 B25-4172

Sample ID No. 55 56 57

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No No No

Sample Color Pale Green/Gray

Beige

Pale Green/Gray

Beige

Pale Green/Gray

Beige

Asbestos Present No No No

Asbestos Type and

Percentage

Gray Layer N.D. N.D. N.D.

Total % Asbestos None None None

Other 40%

Aggregate 40%

Paint 10%

Quartz 20%

Other 70%

Paint 10%

Quartz 20%

Other 70%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4173 B25-4174 B25-4175

Sample ID No. 58 59 60

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No No No

Sample Color Pale Green/Gray

Beige

Pale Green/Gray

Beige White/Beige

Asbestos Present No No No

Asbestos Type and

Percentage

N.D. N.D. N.D.

Total % Asbestos None None None

Other 70%

Paint 10%

Quartz 20%

Other 70%

Paint 10%

Quartz 45%

Other 35%

Paint 20%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4176 B25-4177 B25-101499

Sample ID No. 61 62 62-A

Sample Description N/S N/S Sub Sample of 62

Top Layer

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No Yes No

Layered Yes No Yes

Fibrous No No Yes

Sample Color Pale Green/Gray

Beige Gray

Beige/Brown

Pale Green/Off White

Asbestos Present No No No

Asbestos Type and

Percentage

N.D. Gray Layer N.D. Top Layer N.D.

Total % Asbestos None None None

Other Fibrous Material

In Sample

Cellulose 5%

Non-Fibrous Material

Quartz 20%

Other 70%

Paint 10%

Quartz 20%

Other 80%

Other 75%

Paint 20%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4178 B25-4179 B25-4180

Sample ID No. 63 64 65

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No No No

Sample Color Gray/Beige Gray/Beige Pale Green/Gray

Beige

Asbestos Present No No No

Asbestos Type and

Percentage

Gray Layer N.D. Gray Layer N.D. N.D.

Total % Asbestos None None None

Other 64%

Aggregate 25%

Paint <1%

Quartz 10%

Other 64%

Aggregate 25%

Paint <1%

Quartz 20%

Other 70%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4181 B25-4182 B25-4183

Sample ID No. 66 67 68

Sample Description N/S N/S N/S

Sample Treatment Teased/Crushed

Heated

Teased/Crushed

Heated

Teased/Crushed

Heated

Homogeneous No No No

Layered Yes Yes Yes

Fibrous No No No

Sample Color Pale Green/Gray

Beige

Pale Green/Gray

Beige

Pale Green/Gray

Beige

Asbestos Present No No No

Asbestos Type and

Percentage

N.D. N.D. N.D.

Total % Asbestos None None None

Other 70%

Paint 10%

Quartz 20%

Other 70%

Paint 10%

Quartz 20%

Other 70%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Laboratory No. B25-4184

Sample ID No. 69

Sample Description N/S

Sample Treatment Teased/Crushed

Heated

Homogeneous No

Layered Yes

Fibrous No

Sample Color Pale Green/Gray

Beige

Asbestos Present No

Asbestos Type and

Percentage

N.D.

Total % Asbestos None

Other 70%

Mountain Laboratories, Mountain Laboratories NW, Inc. limits warranty to proper analysis methods only and takes no responsibility for sample procurement. Mountain Laboratories, Mountain

Laboratories NW, Inc., 9922 E. Montgomery Suite #13, Spokane Washington 99206 (509) 922-1365 - Fax (509) 922-1380. PLM has been known to miss asbestos in a small percentage of samples. Thus negative or <1% PLM results should be tested with either SEM or TEM. Customer is responsible for sample separation. This report may only be reproduced in full with written

Sample results must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

File details come from the government source that posted it. Updated .