Section_J_-_Att_No__007_140P8625Q0051_Contractor_Q_A_0001.pdf
PDF 925 KB Posted
- Solicitation number
- 140P8625Q0051
About this file
This document is a Questions and Answers (Q&A) file for a federal contract opportunity to replace electrical and water heaters in park housing. The Q&A addresses specific technical details about electrical and plumbing equipment for multiple housing units, including circuit sizes, water heater specifications, and load center characteristics. Key technical details include:
For units 1057, 1058, 937A, and 937B, the Q&A provides specific information about electrical infrastructure, such as 15-amp circuits, 200-amp subpanels, and load centers. Water heating solutions will transition from a single gas boiler to individual 80-gallon, 120V heat pump hybrid water heaters for each unit. The document references supporting specifications like 23 30 00 (mechanical) and 01 27 00, and includes attachments for cut sheets of disconnect switches and Capehart load center panels, indicating a comprehensive approach to replacing electrical and water heating systems in these park housing units.
View the file
Other files
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Q: What is the Government Furnished Equipment?
A: See SOW
Q: What is the circuit size for the 1057 option?
A: 15-amp. The future equipment will be a heat pump washer/dryer combo.
Q: Is 1057 a crawlspace?
A: Yes
Q: What is the water heater size for 1058?
A: See specification 23 30 00.
Q: Is there a cut sheet for the 1058 disconnect?
A: Yes. Attached. Also attached is the cut sheet for the Capehart load center panels.
Q: What is the size of the 1058 subpanel?
A- 200 amp. See specification Panelboard and Metering 2.8.1
Q: How many water heaters are in 937A and 937 B?
A: Existing set up is a single gas boiler that produces hot water for both units. For the bid option, each unit will have a single 80-gallon, 120V heat pump hybrid water heater.
See updated specification 01 27 00 and 23 30 00.
Q: What size are the new load centers for 937 A and B?
A: 200-amp. See specification Panelboard and Metering 2.8.1
Specifications
Eaton BRP20L200
Catalog Number: BRP20L200
Eaton Eaton BR main lug loadcenter,Main lug only,200 A,X3,Aluminum, NEMA 1,Metallic,10kAIC,CSR2200,NEMA1,40 Circuits,Twenty-four pole,20 Spaces,Two hots,a neutral,and a ground,Single-phase,Type BR 1-inch breakers,120/240V,#1–300 kcmil
General specifications
Eaton BR main lug loadcenter BRP20L200
786689053260 23 in
3.88 in 14.31 in
21 lb 10 year
UL 50
UL 67
Product Name Catalog Number
UPC Product Length/Depth
Product Height Product Width
Product Weight Warranty
Certifications https://www.eaton.com/us/en-us.html
Product specifications
MLO
200 A
Aluminum
Cover included
CSR2200
Single-pole
Single-phase
Type BR 1-inch breakers
120/240V
X3
NEMA 1
Metallic
10 kAIC
NEMA 1
Two hots, neutral and ground
Resources
Loadcenters and Circuit Breakers
Eaton Specification Sheet - BRP20L200
Eaton type BR circuit breaker limited warranty June 2024
Type
Amperage Rating
Bus material
Cover
Main circuit breaker
Number of circuits
Number Of Poles
Number of spaces
Phase
Used with
Voltage rating
Box size
Enclosure
Enclosure material
Interrupt rating
NEMA rating
Number of wires
Brochures
Specifications and datasheets
Warranty guides https://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/vol01_tab01.pdf https://www.eaton.com/us/en-us/skuPage.BRP20L200.pdf https://www.eaton.com/content/dam/eaton/products/low-voltage-power-distribution-controls-systems/circuit-breakers/br-circuit-breakers/eaton-warranty-br-en-us.pdf
Eaton Corporation plc Eaton House 30 Pembroke Road Dublin 4, Ireland Eaton.com
© 2024 Eaton. All Rights Reserved.
Eaton is a registered trademark.
All other trademarks are property of their respective owners.
Eaton.com/socialmedia https://www.eaton.com/us/en-us.html https://www.linkedin.com/company/eaton/ https://twitter.com/eatoncorp/ https://facebook.com/eatoncorporation/ https://www.youtube.com/EatonVideos
4 123
B
C
D
A
B
C
D
3 2
TITLE
SHEET
DRAFTER/DESIGNER DATE (YYYY/MM/DD)
DRAWING
NUMBER
REVISIONSIZE
EATON CORPORATION - CONFIDENTIAL AND PROPRIETARY
UNLESS OTHERWISE SPECIFIED
DIMENSIONS IN
SCALE
OF
THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME. BY TAKING
POSSESSION OF THIS DOCUMENT, THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE
REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE CASE OF CONFLICTING CONTRACTUAL PROVISIONS, THIS
NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT.
NOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION
C Eaton Corporation, All Rights Reserved
A
DSD_AFM_PORT_ACAD_CUSTOMER.DWG
A
2018 2
1=6
INCHES
0398-1189
2018/10/18
M.S.
BR 1" LOADCENTER, MAIN LUG ONLY, INDOOR NEMA 1, 120/240 VAC, 1 PHASE
TYPE BR LOADCENTER RATINGS:
Enclosure: Indoor NEMA 1 Incoming Main: Main Lug Only Loadcenter Electrical Rating: 120/240 VAC, Single Phase Loadcenter Ampere: 200 Amps Max Number of Spaces & Circuits: See Table on Page 2 Incoming Wire Range: #1-300 kcmil Bus Bar Material: Tin Plated Aluminum (Standard) Trim Type: Combination (Standard) Trim Paint: ANSI 61 Light Gray Short Circuit Rating: See Branch Breaker Ratings Box Dimensions: 14.3"W x 3.9"D x "A" (See Table on page 2)
FEATURES:
Plastic Backpan - For Plug-On Neutral Branch Breakers.
Single keyhole mounting - One keyhole at top and bottom for mounting and leveling.
Inboard Neutral Bar Assembly - For better management of load wires.
Drywall Tabs on Enclosure - Sets mounting depth for flush applications.
Top or bottom feed - Acceptable for either top or or bottom applications.
Warranty - 10 year limited warranty on all BR Loadcenters and Breakers.
OPTIONAL ACCESSORIES:
Catalog Number Description GBKP5 5 POS #14-4 Ground Bar GBKP10 10 POS #14-4 Ground Bar GBKP14 14 POS #14-4 Ground Bar GBKP21 21 POS #14-4 Ground Bar NL20 Neutral/Ground Lug #2/0 max NLP20 Neutral/Ground Lug #2/0 max w/Bonding Tab NL300 Neutral/Ground Lug #300MCM max NLP300 Neutral/Ground Lug #300MCM max w/Bonding Tab BRPFP 1" Filler Plate BRPHD Hold-down kit for Type BR breaker
"A"
14.3 3.9
Page: 1 of 2
Job Name:
Item Number: Catalog Number: Designation:
San Francisco Ca
BRP20L200
Note: Catalog Numbers may have addtional characters at the end which describe alternate details, including but not limited to the following: S, F, W, G, K, L, M, N, P and #s, DG, V and #s. Contact sales for those specific details when necessary.
LOADCENTER DETAILS
Catalog # Dim "A"
Main Lug Amps
Spaces / Circuits
Bus Material
Bus Bar Amps Max.
Wire Size Range Cu/Al 60°C or 75°C Notes
BRP12L200 18.75 200 12/24 Alum. 200 #1-300 kcmil BRP16L150 23 150 16/32 Alum. 200 #1-300 kcmil BRP16L150G 23 150 16/32 Alum. 200 #1-300 kcmil BRP20L150 23 150 20/40 Alum. 200 #1-300 kcmil BRP20L150G 23 150 20/40 Alum. 200 #1-300 kcmil BRP20L200 23 200 20/40 Alum. 200 #1-300 kcmil BRP20L200G 23 200 20/40 Alum. 200 #1-300 kcmil BRP24L200 27 200 24/48 Alum. 200 #1-300 kcmil BRP30L200 29.12 200 30/60 Alum. 200 #1-300 kcmil BRP30L200G 29.12 200 30/60 Alum. 200 #1-300 kcmil BRP30L200GP1 29.12 200 30/60 Alum. 200 #1-300 kcmil BRP30L200GW 29.12 200 30/60 Alum. 200 #1-300 kcmil BRP30L200GWP1 29.12 200 30/60 Alum. 200 #1-300 kcmil BRP30L200V25 29.12 200 30/60 Alum. 200 #1-300 kcmil BRP40L200 34.12 200 40/80 Alum. 200 #1-300 kcmil BRP40L200G 34.12 200 40/80 Alum. 200 #1-300 kcmil
4 123
B
C
D
A
B
C
D
3 2
TITLE
SHEET
DRAFTER/DESIGNER DATE (YYYY/MM/DD)
DRAWING
NUMBER
REVISIONSIZE
EATON CORPORATION - CONFIDENTIAL AND PROPRIETARY
UNLESS OTHERWISE SPECIFIED
DIMENSIONS IN
SCALE
OF
THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTAINED THEREON, IS CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON CORPORATION, AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME. BY TAKING
POSSESSION OF THIS DOCUMENT, THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE
REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE CASE OF CONFLICTING CONTRACTUAL PROVISIONS, THIS
NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT.
NOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION
C Eaton Corporation, All Rights Reserved
A
DSD_AFM_PORT_ACAD_CUSTOMER.DWG
A
2018 2
1=6
INCHES
0398-1189
2018/10/18
M.S.
BR 1" LOADCENTER, MAIN LUG ONLY, INDOOR NEMA 1, 120/240 VAC, 1 PHASE
Page: 2 of 2
Job Name:
Item Number: Catalog Number: Designation:
San Francisco Ca
BRP20L200
penaj Highlight
| Contractor Walk Questions |
| Pages from 014 Electrical Panel Submittals rev2a |
| Pages from 140P8624C0005 Transmittal 03.1 - Electrical Meter Panels Submittal_AAN |
File details come from the government source that posted it. Updated .