Section_J_-_Att_No__007_Updated_SOW_Gates_0002.pdf

Enhance 4 Park-wide Entrance Gates at SAMO SOW, Rev 1 - 5/19/2025

The Santa Monica Mountains NRA has the need to enhance four (4) remote site park entrance gates at Solstice Canyon, Zuma Bonsall, Rancho Sierra Vista and Cheseboro Canyon. These gates vary in enhancements, see below for each site requirement:

Solstice Canyon currently has a single sliding vehicle gate with solar power. We are keeping this gate, and would like to switch from solar power to electric power:

1. Remove existing solar package from operator

2. Connect to main power (power by others)

3. Install new loop (1) (currently exists but is too close to gate)

4. Set goose neck post in concrete with wireless keypad (ADD)

5. Install and program Cellgate Watchman W482 or like model which includes a high-resolution touch screen, built in HID key fob reader, and a high-resolution video camera entry code tracking, requires a monthly fee TBD per plan chosen. REMOVE.

6. Run and test for proper operation

7. Have SCE power to meter box next to (ADD) gate operator and install meter

(REMOVE).

Zuma Bonsall currently has a manual single swing gate with no power. We would like to keep this gate, add electrical power to a new operator unit:

1. Dig and form one 24" x 26" x 16" concrete pad for operator.

2. Pour concrete pad, mount operator.

3. Dig and set loops (2) free exit & safety or provide other means of free exit. (ADD)

4. Install loop detectors in operator (2)

5. Wire in main power to operator (power by others)

6. Install a timer (times TBD)

7. Install photo safety eye required.

8. Install gooseneck with wireless keypad. (ADD)

9. Install wireless edge kit required. Install Cellgate Watchman W482 or like model which includes a high-resolution touch screen, built in HID key fob reader, and a high-resolution video camera entry code tracking, requires a monthly fee TBD per plan chosen. REMOVE.

10. Install L.A.C.F.D Knox box with key switch (required)

11. Run and test for proper operation.

12. Have SCE run power from pole to meter box next to operator. (ADD)

Rancho Sierra Vista currently has a double swing arm manual gate, replace with double sliding gate with solar power:

1. Custom 6' tall x 30' wide bi sliding steel gate

2. Excavate 60' long by 14" wide by 18" deep v track pad.

3. Form and pour concrete for track, install 60' of steel v track.

4. Dig and form (2) 24" x 26" x 16" concrete pads for operators Pour concrete pad, mount operators.

5. Dig and set guide roller posts (2)

6. Dig and set loops free exit & safety (2)

7. Hang gates Mount 85-watt solar panel to guide roller posts (2)

8. Install solar package in operators (2)

9. Install loop detectors in operators (2)

10. Wire in solar power to operators Install a timer (times TBD)

11. Install photo safety eyes (2) required

12. Install wireless edge kit (2) required

13. Install wireless keypads (2) inside & outside (REMOVE), (and add) (1) outside with gooseneck. (ADD)

14. Install V.C.F.D Knox box with key switch (required)

15. Run and test for proper operation

Cheseboro Canyon currently has a double manual swing gate, to include solar power operation:

1. Dig and form (2) 24" x 26" x 16" concrete pads for operators

2. Pour concrete pads and mount operators.

3. Fabricate brackets and weld to existing gates

4. Connect operator arms to existing gates

5. Dig and set loops (2) free exit & safety

6. Dig and set post for solar Mount 85-watt solar panel to post

7. Install solar package in operator

8. Install loop detectors in operator (2)

9. Wire in solar power to operator

10. Install Mag Lock

11. Install a timer (times TBD)

12. Install photo safety eye required

13. Install wireless edge kit required

14. Install wireless keypads (2) inside & outside (REMOVE) (and ADD) (1) outside with gooseneck. (ADD)

15. Install L.A.C.F.D Knox box with key switch (required)

16. Run and test for proper operation