B09_Statement_of_Work_Install_Gates_at_Gov_Wash_Area_(Revised)_0001.docx

LAKE – Fabricate and Install Gates at Government Wash Area Lake Mead National Recreation Area

Boulder City, Nevada

SERVICES REQUEST: Fabricate and Install Gates at Government Wash Area

DATED: January 27th, 2025 (Revised September 3rd, 2025)

Prepared By: Trent Martinez, Supervisory Facility Operations Specialist

NATIONAL PARK SERVICE

Lake Mead National Recreation Area A04 statement of work: Fabricate and Install Gates at Government wash area

1. Background Lake Mead National Recreation Area (LAKE) is a U.S. national recreation area in Southeastern Nevada and Northwestern Arizona. Operated by the National Park Service, Lake Mead NRA follows the Colorado River corridor from the westernmost boundary of Grand Canyon National Park to just north of the cities of Laughlin, Nevada and Bullhead City, Arizona. LAKE offers many recreational opportunities including boating, hiking, fishing, and both tent and RV camping. Because of these attractions, dispersed camping of RV’s and campers in unauthorized areas has become a growing concern. Specifically, the Government Wash area of LAKE has become inundated with disperse camping that has resulted in resource damage, littering of trash, and lead to major health and safety concerns.

This project will fabricate and install four metal gates at the area of Government Wash. The gates will be of metal pipe construction and will need to span the entire road to restrict access of vehicles during closures. All gates are of the same construction except for the gate at the “Authorized Vehicles Only” access road nearest to the wash. That gate will only have one swing arm and span roughly 18 feet across the road. NPS staff will be responsible for removing any of the old gates and preparing the road and shoulder surface before installation.

2. project Location:

Project locations:

1. Northshore Road Hwy 167 and 8.0 Mile Road GPS Coordinates 36.157489, -114.808090

2. Northshore Road Hwy 167 and Boxcar Cove Road GPS Coordinates 36.156848, -114.793656.

3. Government Wash Road and Utility Access Road GPS Coordinates 36.143153, -114.847190

4. Northshore Road and Utility Access Road GPS Coordinates 36.148631, -114.846218 – ONE ARM SWING GATE

3. Project Tasks

The following tasks shall be completed by contractor as a part of this contract:

a) Fabricate gates, gate posts, and attachment posts based on drawings attached to document, tasks within this statement of work, and information requested by NPS COR and maintenance staff. All pipe used for construction of the gate will be carbon steel and at a minimum have schedule 40 wall thickness.

b) Gate arms will have a 6” diameter post sleave and 3” diameter arms. Gate post will be made of 5” diameter pipe and pipe hinge to allow gate arms to sleave over post and utilize pipe hinge. Attachment posts will be made of 5” diameter pipe.

c) Gate arms shall lock with a pin to each other when closed and shall lock to attachment posts by chain when kept open. NPS will provide padlocks for locking the gates and other components chains, pins, fasteners, and accessories shall be provided by the contractor.

d) Paint all metal finishes brown (NPS will provide exact color code) with high performance oil-based enamel paint.

e) Excavate and set gate posts and attachment posts in a 3’ x 3’ x 3’ concrete footing just outside of edge of road. Contractor shall set exact location of posts to assure proper opening and closure of the gates and gate elements in the field.

f) Excavate and set gate attachment posts according to the drawings assuring gate arms open with the flow of traffic of each lane and are slightly past parallel to road edge when secured open.

g) Install highway approved reflective tape along the top post of the gate arms and around the top of each gate arm, attachment post, and bollard.

h) Assure gate arms swing fluidly, lock and open without use of force, weight, or additional tools. Pins and locking mechanism are easy to remove and use without hammers or adjustments.

i) Finished gate will be visually plumb and level, paint will be free of chips and scratches, fasteners and pins will be secure, and concrete foundations will be smooth and level.

j) All equipment tracks showing on unpaved surfaces will be raked, debris removed from site, and road swept of debris caused by the construction.

4. Contractor Use of Premises

a) Contractor will keep worksite organized and clean as work allows

b) Designated areas for staging and contractor access will be identified by NPS COR

c) Contractor will be responsible for disposal of all construction debris and waste

d) Contractor will provide temporary traffic control while working in the road and road shoulders in accordance to the Nevada Department of Transportation Guidelines

e) Any government property damaged during this project will be replaced at the contractor’s expense

f) COR has the right to revoke any of the above privileges at any time if cleanliness or unprofessional behavior warrants it image1.wmf