Atch_1_to_Amd_1_QandAs_0001.pdf

PDF 195 KB Posted

Attached to
Mill & Overlay Roadway-CANA Federal contract opportunity
Solicitation number
140P5424R0016
Issued by
Department of the Interior National Park Service Southeast Region

About this file

This document is an attachment containing questions and answers related to Amendment 1 of Solicitation 140P5424R0016 for the "Mill & Overlay Roadway-CANA" contract opportunity, issued by the Department of the Interior National Park Service Southeast Region.

The key details are:

  • The work area extends up to and 3 feet beyond the easternmost speed bump.
  • The demolished speed bumps will not be reinstalled, but the contractor should include new asphalt speed bumps in their proposal.
  • The striping must be thermoplastic, not standard traffic marking paint.
  • Any changes to the Statement of Work from these Q&As will be incorporated before award.
  • Acknowledgement of these answers demonstrates the offeror's receipt of the updated information.

View the file

Other files for this federal contract opportunity

Other files attached to Mill & Overlay Roadway-CANA, newest first.
File Type Posted
Sol_140P5424R0016_Amd_0001.pdf PDF
Sol_140P5424R0016.pdf PDF
Atch_2_DBA_WD-Brevard_County.pdf PDF
Atch_1_SOW.pdf PDF
Atch_4_Area_Layout_and_Photos.pdf PDF
Atch_3-Site_Visit_Info.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

140P5424R0016 Amendment 1 Attachment 1

Question #1: Does the work area extend up to or beyond the eastern most speed bump?

Answer: Yes, mill and overlay will end three feet beyond the eastern most side of the existing speed bump (see redline on photo below)

Question #2: Will the demo'd speed bumps be reinstalled? If so, is asphalt acceptable?

Answer: The demolished speed bumps will not be re-installed, please include asphalt speed bump on your proposal.

Question #3: Is the striping to be thermoplastic or standard traffic marking paint?

Answer: Yes, striping will need to be thermoplastic.

Note: Any answers or clarifications that add to or change any information currently in the statement of work (SOW) will be incorporated before award. Acknowledgement of these answers demonstrates offeror’s receipt of updated info.

File details come from the government source that posted it. Updated .