B09_Attch_07_CAHA_158701_LHR_Trail_Interpretive_Bid_Package_0001.pdf

Cape Hatteras

NATIONAL SEASHORE

CAHA 158701

LIGHTHOUSE ROAD TRAIL

BID DOCUMENTS

JULY 17, 2023

5207 Georgia Ave.

Washington, DC 20011 T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits Cover Page and Index X0.00

Noted

Bid Documents

DRAWING INDEX: EXHIBIT DESIGN

OVERALL

X0.00 Cover Page and Index X0.01 Notes and Finish Schedule

SITE PLAN

X0.10 Site Plan: Overall X0.11 Site Plan: Detail Views X0.12 Site Plan: Detail Views X0.13 Site Plan: Detail Views X0.14 Lighthouse Move Path

WAYSIDES, TYP.

X1.20 Typ. Wayside Elevation X1.30 Typ. Wayside Details

WAYSIDES G-04 w/ Roller X2.20 Wayside w/ Roller Elevation X2.30 Wayside w/ Roller Details

WAYSIDES G-05 w/ Viewer X3.20 Wayside w/ Viewer Elevation X3.30 Wayside w/ Viewer Details

TRAILHEAD

X4.20 Typ. Trailhead Elevation X4.30 Typ. Trailhead Details X4.31 Typ. Trailhead Details X4.32 Typ. Trailhead Details

SURFBOARD BENCH

X5.20 Surfboard Bench Elevation X5.30 Surfboard Bench Details

GRAPHICS

G.1 - G.13 Graphic Layouts

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

Issued: July 17th, 2023

T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits Notes and Finish Schedule X0.01

Noted

X1.100

1. Contractor shall acquaint themselves with the following:

- Conditions of the contract.

- Requirements of local labor.

- Character and accessibility of the construction site.

2. Contractor shall perform work in accordance with applicable federal, state and local regulations.

3. Contractor must understand the nature, extent, difficulties, and restrictions of the work. Contractor shall verify and coordinate all "by others" and shall immediately report proceeding with the work and shall immediately report any discrepancies to the contracting officer.

4. Contractor shall verify dimensions, grades, levels, boundaries and construction indicated on drawings before proceeding with the work and shall immediately report any discrepancies.

5. Contractor shall submit dimensioned shop drawings with all existing walls and "As-Built" conditions noted for review and approval of work prior to installation.

6. Dimensions, notes, finishes, and fixtures shown on typical plans, sections, or details shall apply to similar, symmetrical, or opposite plans, sections or details.

7. Dimensions noted "clr" are not adjustable without approval of the client.

8. Contractor shall not make, cause to be made, or permit a subcontractor to make any change to what is specified in the contract documents without specific authorization of the client.

9. Schedule information contained in these contract document drawings are for reference purposes only. Verify all information with specifications and schedules; however, dimensions in drawings supercede dimensions in schedule.

X1.100

X1.100

PT 01

Drawing Identification Marker

Drawing Reference Marker

Detail Drawing Reference Marker

Finish Note

Graphic Number

Case Number

AV Number

Column Marker

Center Line

Break Line

Hidden Line

Revision Marker

And &

Angle <

At @

Center Line C

Number #

Perpendicular

Round

Square

Greater Than >

B

GX.XX

Fabricator Notes The exhibit design and requirements shown are noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit making any modifications necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to Contracting Officer and Exhibit Designer for review and approval prior to fabrication. These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The fabricator hereby acknowledges and accepts the following terms and conditions:

1. These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference for the preparation of shop drawing submittals on the subject project.

2. These drawings shall not modify the Fabricator's obligation and responsibility to review the construction documents, including without limitation , the need to check, confirm, and coordinate the work required of this fabricator with the work provided by other contractors.

3. The fabricator accepts full liability for their use and consequences of such use. The fabricator agrees to defend, indemnify, and hold harmless HealyKohler Design and its employees and contractors from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

L

CX-XX

A0-00

General Notes Symbol Key All aluminum surfaces to be painted, unless otherwise noted.

Paint Color TBD.

ALL MATERIALS, FINISHES, AND GRAPHICS ARE TO BE EXTERIOR, MARINE GRADE.

Finishes

VIS Weld and Rivets Chart

Sample Submittals Submit (2) sets of 6” x 6” samples of all materials and finishes noted in drawings.

Submit (2) sets of samples showing each unique graphic output method, overlaminate, and finish.

Samples will not be returned to the Contractor, so produce in-house copies as needed for internal use.

Day 10

Highway 12 Trailhead T-01 Scale: 1/64" = 1'-0"A

Trailhead T-01

Wayside G-04

Wayside G-03

Wayside G-05Trailhead T-03 Location in Trail Plans CLIN Option #5

5207 Georgia Ave.

Washington, DC 20011 T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits

Wayside G-04 Scale: 1/64" = 1'-0"

Lighthouse Trailhead T-03 Scale: 1/64" = 1'-0"

Wayside G-03 Scale: 1/64" = 1'-0"

N

B

A

E F

D

E

F

Wayside G-02

Site Plan Overall X0.10

Noted

Surfboard Exhibit

Lighthouse Move Path

(Approx.)

Interpretive Plaza Scale: 1/64" = 1'-0"C

Wayside G-05 Scale: 1/64" = 1'-0"D

Wayside G-01

Trailhead T-02

C

B

Trailhead T-03 Location in Trail Plans Base Bid

T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits

Highway 12 Trailhead T-01 Scale: 1/32" = 1'-0"

Trailhead T-01

N

A Wayside G-03 Scale: 1/32" = 1'-0"

N

B

Wayside G-03

Site Plan Detail Views X0.11

Noted

Day 10

Day 11

5207 Georgia Ave.

Washington, DC 20011 T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits

Trailhead T-02

Wayside G-05

Wayside G-01

Site Plan Detail Views X0.12

Noted

Wayside G-02

Surfboard Exhibit

Wayside G-05 Scale: 1/32" = 1'-0"DInterpretive Plaza

Scale: 1/32" = 1'-0"C

N N

Lighthouse Move Path (A pprox.)

T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits

Lighthouse Trailhead T-03 Scale: 1/32" = 1'-0"

Trailhead T-03 Location in Trail Plans CLIN Option #5

N

FWayside G-04 Scale: 1/32" = 1'-0"

Wayside G-04

N

E

Site Plan Detail Views X0.13

Noted

Trailhead T-03 Location in Trail Plans Base Bid

Original Lighthouse Location (Approx) Day 0

Day 1

Day 2

Day 3

Day 4

Day 5

Day 6

Day 7

Day 8

Day 9

Day 10

Day 11

Day 12

Day 13

Day 14

Day 15

Day 16

Day 17, 18

Day 19

Day 20

Day 21, 22

Current Lighthouse Location (Approx) Day 23

2000' Moved

5207 Georgia Ave.

Washington, DC 20011 T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits Site Plan Lighthouse Move Path X0.14

N

Day 0

Day 1 Day 3

Day 5

Day 16

Day 21+22

Day 2

Day 4 Day 6

Day 7

Day 8

Day 9

Medallion Location

Day 19

Day 20

Day 15

Day 12 Day 11

Day 10

Medallion Location Medallion Location

Medallion Location

Medallion Location

Medallion Location

Medallion Location

Day 17+18 Day 14

Day 23

Day 13

Ø6"

EQ

EQ

144"

Medallion Site Detail Scale: 3/16" = 1'-0"

Medallion Photo Reference Not to Scale

Medallion Section Scale: 6" = 1'-0"

1/8"

1/16"

1/32"

Bronze medallion

(4) 1/8" x 1 1/2" Stainless steel lugs

Epoxy layer

Noted

Medallion Design Draft Scale: 6" = 1'-0"

6" dia.

Li g h th ou se Move Path

FULL SIZE

Day 10

DAY

June 26, 1999

1825 FEET TO GO

MOVED 174 FEET

T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits

Painted Aluminum Structure

Typ. Wayside Scale: 3/4" = 1'-0"

X1.20

49"

24"

32"

135°

40"

2" 36" 2"

3"

Wayside, Typical Elevation X1.20

Noted

X1.30

X1.30

X1.30

X1.30

36"x24" Angled Panel ImageLOC Sign by Gopher

Signs or eq.

T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits Typ. Wayside Details X1.30

Noted

Typical Wayside - Vertical Section Scale: 6" = 1'-0"

X1.30

Typical Wayside - Plan Detail Scale: 6" = 1'-0"

X1.30

Typical Wayside - Horizontal Section Scale: 6" = 1'-0"

X1.30

Typical Post Mounting Detail Scale: 1" = 1'-0"

X1.30

6"

30"

Backfill

Concrete Footer

2" x 3" Post

Gravel Layer (for Drainage)

12"

2" x 3" x 1/8" Tubular Aluminum Post

1/8" Drilled Weep Hole Note: See Weep Hole Chart

NPS Standard 3/16" Aluminum "F" Extrusion

.125 Graphic Panel

3/16" Aluminum Core Panel Welded to "F" Extrusion

1" x 1" x 3/16" Breakformed Aluminum Angle

1-3/4" x 3/4" x 3/16" Breakformed Aluminum Angle

1/4" - 20 x 1/2" Long, 18-8 Stainless Steel, Countersunk Flat Head, Phillips

Machine Screw Note: Top of Frame is Connected by Screws and is

Removable

Post Cap Welded to Top of Post

1/4" - 20, 6061-T6 Machine Screw Nut

Welded to Aluminum Angle

3/8" Diameter, Aluminum Drive Rivets

Note: Refer to Rivet Chart for Quantity per

Frame

3/4"

3/8"

1 3/4"

3/4"

45°

2" x 3" x 1/8" Tubular Aluminum Post

Line of 1/8" Undercut Graphic Panel

Line of 3/16" Aluminum Frame

Post Cap

3/4"

3/4" 1/16"

Standard NPS 3/16" Aluminum "F" Extrusion

1/16" Gap for Panel Expansion

3/8" Diameter, Aluminum Drive Rivets Note: Refer to Rivet Chart for Quantity per Frame

Standard NPS 3/16" Aluminum

"F" Extrusion

2" x 3" x 1/8" Tubular Aluminum

Posts

3/16" Aluminum Core Panel Welded to Aluminum Angle

1/16" Gap For Panel Expansion

.125 Graphic Panel

1 3/4"

3/8"

1/16"

1,500 feet

2,900 fe et

YOU ARE HERE

At lan tic O ce an

OLD

LIGHTHOUSE

LOCATION

NEW LIGHTHOUSE

LOCATION

Inching Inland Starting June 17, 1999, engineers began a monumental job: to move the nation’s tallest brick lighthouse away from the shore. First, workers lifted the 4,830-ton structure from its foundation. Then they eased the lighthouse onto a platform atop a 700-foot rail system. Push jacks moved the frame five feet at a time, with each push taking about one minute. As they inched inland, workers dismantled and rebuilt the rail system, creating a smooth path for the lighthouse’s journey. On the lighthouse, 60 sensors tracked load, vibration, and tilt.

On July 9, the lighthouse reached its destination, 2,900 feet from its original location and safe from the sea for decades to come.

You are standing on the lighthouse move path. Workers cleared and graded a path over a half-mile long and 100 feet wide. They then maneuvered the lighthouse onto a platform that rolled down the rail system.

Rolling Along Engineers attached 100 rollers to steel beams that supported the moving lighthouse. Placed upside down from how you see them now, these rollers served as the lighthouse’s “wheels.”

Cape Hatteras National Seashore National Park Service U.S. Department of the Interior

1,500 feet

2,900 fe et

YOU ARE HERE

At lan tic O ce an

OLD

LIGHTHOUSE

LOCATION

NEW LIGHTHOUSE

LOCATION

Inching Inland Starting June 17, 1999, engineers began a monumental job: to move the nation’s tallest brick lighthouse away from the shore. First, workers lifted the 4,830-ton structure from its foundation. Then they eased the lighthouse onto a platform atop a 700-foot rail system. Push jacks moved the frame five feet at a time, with each push taking about one minute. As they inched inland, workers dismantled and rebuilt the rail system, creating a smooth path for the lighthouse’s journey. On the lighthouse, 60 sensors tracked load, vibration, and tilt.

On July 9, the lighthouse reached its destination, 2,900 feet from its original location and safe from the sea for decades to come.

You are standing on the lighthouse move path. Workers cleared and graded a path over a half-mile long and 100 feet wide. They then maneuvered the lighthouse onto a platform that rolled down the rail system.

Rolling Along Engineers attached 100 rollers to steel beams that supported the moving lighthouse. Placed upside down from how you see them now, these rollers served as the lighthouse’s “wheels.”

Cape Hatteras National Seashore National Park Service U.S. Department of the Interior

5207 Georgia Ave.

Washington, DC 20011 T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits

Painted Aluminum Structure

Wayside G-04 Scale: 3/4" = 1'-0"

X2.20

Typ. Wayside 12"

54"

2"

3"

32"

24"

Wayside G-04 Elevation X2.20

Noted

Hilman Narrow Top 8T Rollers, 11-3/4" L x 3-1/8" H x 5" W, Weight: 24 Ibs

Wayside G-04 Scale: 1-1/2" = 1'-0"

X2.20

EQ

EQ

11 3/4"

5"

X2.30

X2.20

G-04 36"x24" Angled Panel ImageLOC Sign by Gopher Signs or eq.

EQ

EQ

T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits Wayside G-04 - Rollers Details X2.30

Noted

3 1/8"

Tactile Wayside - Section Scale: 6" = 1'-0"

X2.30

Mechanically Fastened to Wayside

Hilman Narrow Top 8T Rollers, Existing Product

FPO

A Shifting Shoreline, An Imperiled Lighthouse Look toward the ocean and you will see where the Cape Hatteras Lighthouse used to be. When it was built in 1870, the lighthouse was 1,500 feet from the ocean. Over the years, wind and water moved sands and shifted Hatteras Island slowly westward. By 1970, the ocean was 120 feet away.

The National Park Service wanted to protect the lighthouse long-term. After years of engineering studies and outside review, the park opted to relocate the structure more than a half-mile inland. But the plan stirred controversy.

Many people feared destruction of the iconic lighthouse. With the world watching, the high-stakes move began in June 1999.

For decades, people worked to protect the lighthouse, but sea walls and sandbags could not stop the encroaching ocean. In 1999, the park began planning for the lighthouse’s relocation.

Cape Hatteras National Seashore National Park Service U.S. Department of the Interior

FPO

A Shifting Shoreline, An Imperiled Lighthouse Look toward the ocean and you will see where the Cape Hatteras Lighthouse used to be. When it was built in 1870, the lighthouse was 1,500 feet from the ocean. Over the years, wind and water moved sands and shifted Hatteras Island slowly westward. By 1970, the ocean was 120 feet away.

The National Park Service wanted to protect the lighthouse long-term. After years of engineering studies and outside review, the park opted to relocate the structure more than a half-mile inland. But the plan stirred controversy.

Many people feared destruction of the iconic lighthouse. With the world watching, the high-stakes move began in June 1999.

For decades, people worked to protect the lighthouse, but sea walls and sandbags could not stop the encroaching ocean. In 1999, the park began planning for the lighthouse’s relocation.

Cape Hatteras National Seashore National Park Service U.S. Department of the Interior

5207 Georgia Ave.

Washington, DC 20011 T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits

Painted Aluminum Structure

Wayside G-05, w/ Viewer Scale: 3/4" = 1'-0"

X3.20

80"

48"

32"

5"

3" 3"36"

42" Typical Wayside

Wayside G-05, with Viewer Elevation X3.20

Noted

X3.30

X3.30

G - 05 Typical Wayside

G - 05A

(2) 3/8"tk. 36" x 48" Glass Panels w/ Graphic Print Sandwiched Between, Secured to Structure

T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits Wayside G-05 - Viewer Details X3.30

Noted

Viewer - Horizon Line Study Scale: 1/2" = 1'-0"

X3.30

50"

61"

60"

Avg. adult height eye-line/horizon

Graphic panel eye-line/horizon

Avg. comfortable viewing angle

5"

3" x 5" x 1/8" Tubular Aluminum Post

3" x 5" x 1/8" Tubular Aluminum Post

(2) 3/8" Glass Panels

3/8" Diameter, Aluminum Drive Rivets Note: Refer to Rivet Chart for Quantity per Frame

NPS Standard 3/16" Aluminum "F" Extrusion

1" x 1" x 3/16" Breakformed Aluminum Angle

1-3/4" x 3/4" x 3/16" Breakformed Aluminum Angle

1/4" - 20 x 1/2" Long, 18-8 Stainless Steel, Countersunk Flat Head, Phillips Machine Screw Note: Top of Frame is Connected by Screws and is Removable

1/4" - 20, 6061-T6 Machine Screw Nut Welded to Aluminum Angle

Viewer - Vertical Section Scale: 6" = 1'-0"

X3.30

Standard NPS 3/16" Aluminum "F" Extrusion

3/8" Diameter, Aluminum Drive Rivets Note: Refer to Rivet Chart for Quantity per Frame

3/8"

2 3/16"

Viewer - Horizontal Section Scale: 6" = 1'-0"

X3.30

(2) 3/8" Glass Panels

13/16"

1/8" Drilled Weep Hole Note: See Weep Hole Chart

Cape Hatteras Visitor Center

Cape Point

La br ad or

C ur re nt

Gulf Stream Atla ntic

O ce an

Salvo

Little Kinnakeet

Frisco

Buxton

Avon

Waves

Hatteras

H at te ra s Is la nd

Ocra coke Isla nd

Ocracoke

Pa m lic o

So un d

Alligator River National Wildlife

Refuge

FPO

This paved, multiuse X.X-mile trail connects the village of Buxton to the Cape Hatteras Lighthouse.

Distances

• Highway 12 to Interpretive Plaza = 0.9 miles

• Interpretive Plaza to Cape Hatteras Lighthouse = 0.4 miles

• Interpretive Plaza to Old Lighthouse Beach = 0.2 miles

The Lighthouse Trail

Stay Safe

• Be careful crossing intersections and in parking areas.

• Pay attention to weather conditions and storm alerts.

• Stay hydrated and limit exposure during high heat and humidity.

• Sand, pavement, and walkways get hot in the summer. Always wear sandals or shoes when accessing the beach.

• Be prepared for insects by wearing appropriate clothing and insect repellant. Check for ticks after venturing into grassy areas and maritime forests.

• Always keep a safe distance from wildlife.

• Do not swim alone, at night, or near fishing piers.

Cape Hatteras National Seashore National Park Service U.S. Department of the Interior

As you walk this trail, an iconic Outer Banks landmark may often catch your eye. Since 1870, the Cape Hatteras Lighthouse has helped ships navigate treacherous waters.

The lighthouse has survived beating winds, countless storms, and a high-profile relocation in 1999. A symbol of endurance and ingenuity, the lighthouse stands watch over this beautiful stretch of seashore.

To the Lighthouse

Hit the Beach

Cape Hatteras offers sea, sand, and plenty of fun. The safest way to enjoy the Atlantic Ocean is at a lifeguarded beach.

Lifeguards are on duty at Old Lighthouse Beach from Memorial Day to Labor Day.

Wildlife Watch

Sea turtles make their nests on Cape Hatteras beaches. Shorebirds squawk, crabs skitter across the sand, and lizards hide in tall grass. Out to sea, dolphins and even whales may poke up from the waves. Please give wildlife space and respect their habitats.

Island Habitats

Hatteras Island is very narrow, but many habitats exist between its shores. Beaches, sand dunes, grasslands, shrub thickets, marshes, and woodlands are all part of Cape Hatteras National Seashore. Notice how the vegetation changes along the trail.

Cape Hatteras National Seashore National Park Service U.S. Department of the Interior

Museum of the Sea#4

Original lighthouse location

#1

#2

Cape hatteras Lighthouse

#3 Visitor Center map legend

Lighthouse Trail

Road

#5 Lighthouse Road

Sea

Water

Parking lot

#6 Cape point

#6

#1

#2

#3

#4

#5

Museum of the Sea

Original Lighthouse Location

2 Cape Hatteras Lighthouse

3 Visitor Center

Map Legend

Lighthouse Trail

Road

5 Lighthouse Road

Land

Water

Parking Lot

6 Cape Point

5207 Georgia Ave.

Washington, DC 20011 T: 202.774.5555 F: 202.882.1709 www.healykohlerdesign.com

CONTACT AT HKD

Emily Furman Sennett

PROJECT NO.

21034

DESIGN BY

HKD Team

PHASE

Bid Documents

SCALE

ISSUE DATE

07.17.2023

Sheet is full-size at 11" x 17"

CAHA 158701

Lighthouse Road Trail Interpretive Exhibits Cape Hatteras National Seashore

The exhibit design and requirements shown or noted on this drawing are not for construction and are intended only to establish the visual design concept and intent. The fabricator is responsible for fabricating the exhibit, making any modifications and additions necessary to fulfill the requirements while maintaining the visual design concept. The Fabricator shall prepare detailed shop drawings of all components and submit to HealyKohler Design for review and approval prior to fabrication.

These shall show design, material types and thicknesses, finishes, colors, dimensions, connections to adjacent work, consideration for thermal and moisture movement, anchorage to structure and manufacturer's part numbers.

The Fabricator hereby acknowledges and accepts the following terms and conditions:

These drawings may not be used, duplicated, modified or changed in any manner. Any unauthorized use, duplication, modification or change will subject the Fabricator and its agents to liability for such acts. Use of the drawings is granted only for reference or the preparation of shop drawing submittals on the subject Project.

These drawings shall not modify the Fabricator's obligation and responsibility to review the Construction Documents, including without limitation, the need to check, confirm and coordinate all dimensions and details, take field measurements, verify field conditions and coordinate the Work required of this Fabricator with the Work provided by other Contractors for the Project.

The Fabricator accepts full liability for their use and consequences of such use. The Fabricator agrees to defend, indemnify and hold harmless HealyKohler Design and and its employees from and against all loss, liability, obligation, damage, penalty, cost, claim, change, or expense (including attorney's fees) occurring as a result of use of said drawings for any purpose whatsoever.

NOT FOR

CONSTRUCTION

For Bid Purposes Only

CAHA 158701 Lighthouse Road Trail Interpretive Exhibits

Painted Aluminum Structure

Typ. Trailhead Scale: 3/4" = 1'-0"

X4.20

84"

11 3/8"

32"

5"

81" 3" 36"

1 1/2"

48"

32"

27"

135°

86"

31"

49"

Painted Aluminum Custom-Cut Silhouette Panel, Bolted to Structure

Trailhead, Typical Elevation X4.20

Noted

36"x48" Angled Panel ImageLOC Sign by Gopher

Signs…