B08_-_Attachment_1_-_Specifications_for_Hardware_rev3_0001.pdf
PDF 167 KB Posted
- Attached to
- GLAC: LOG GUARDRAIL HARDWARE - ACME STUDS AND HEX Federal contract opportunity
- Solicitation number
- 140P1424Q0071
About this file
This document is a set of specifications for hardware required for a federal contract opportunity related to the Going-to-the-Sun Road (GTTSR) guard railing project at Glacier National Park.
The key details are:
- The National Park Service is seeking 2000 double-threaded 1" x 4" studs and 2000 1" ACME threaded nuts with washer face for the GTTSR guard railing project.
- The studs have 8 threads per inch on one end with a 5/8" tapered end, and 8 ACME general purpose threads on the other end.
- The delivery address is 61 Scoyen Circle, West Glacier, MT 59936, with a delivery deadline of August 12, 2024.
- The related federal contract opportunity is Solicitation Number 140P1424Q0071 for "GLAC: LOG GUARDRAIL HARDWARE - ACME STUDS AND HEX" issued by the Department of the Interior National Park Service Intermountain Region.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140P1424Q0071_Amd_0002.pdf | ||
| RFIs_for_GLAC_Guardrail_Hardware_w_Answers_0002.pdf | ||
| B08_-_UPDATED_INSTRUCTIONS_-_20JUNE24_-_Solicitation_-_GLAC_Guardrail_Hardware_0002.pdf | ||
| Sol_140P1424Q0071_Amd_0001.pdf | ||
| B08_-_Attachment_2_-_Example_Illustration_-_GTSR_Guardrail_Retrofit_Detail_rev1_0001.pdf | ||
| Sol_140P1424Q0071.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
National Park Service
Park: Glacier National Park
Project: Hardware for Going to the Sun Road (GTTSR) Guard Railing
Date: 17 January 2024
Deliver to Address: 61 Scoyen Circle, West Glacier, MT 59936
Deliver by: 12 August 2024
Specifications for Studs/Nuts
Quantity 2000 – 1"x 4” A193 B7 Double threaded studs. Double ended studs will be 1.25" Of 8-Thrd/In.
UNC-2A Standard Thread on one side and 8-Thrd/In. ACME General Purpose Thread on other side.
ACME thread will have a 5/8” tapered end.
Quantity 2000 – 1” ACME threaded nut with washer face.
Prototype Example:
***NOTE: This prototype sample is for illustrative purposes only. All measurements must match the specifications outlined above.
Details regarding sizes/dimensions:
Length of taper: 1/2" tapered 1" down to 1/2" circumference in 1/2 inch length
Length of ACME Thread: 1 3/4"
Length of non-threaded section: 3/4"
Standard thread: 1"
1"-8 ACME Thread for stud and nuts.
Blank Page
File details come from the government source that posted it. Updated .