A04_0044018312_Amendment_0002_Fence_Specifications_0002.docx
DOCX document 15 KB Posted
- Attached to
- CHIC: REPLACE FENCE Federal contract opportunity
- Solicitation number
- 140P1225Q0052
About this file
This document is a Construction Specification for Chain Link Fence detailing the requirements for a fence replacement project at a National Park Service site. The specification covers 2,200 linear feet of fencing, including one 4' walk-through gate and one 10' drive-through gate, all 6' in height. Material specifications require galvanized 9-gauge chain link fabric with 2-inch mesh, conforming to ASTM standards for heavy industrial fencing, with steel pipe posts set in concrete at 10-foot intervals. The contractor is responsible for removing existing fence and vegetation within a 10-foot corridor on the National Park Service side of the fence line.
The project is part of a solicitation (140P1225Q0052) by the Department of the Interior National Park Service Intermountain Region to replace fencing destroyed by a 2024 tornado. The specification provides detailed installation requirements, including fabric installation on the NPS side of posts, stretching techniques, and fastening methods. Payment will be based on pricing submitted in response to the solicitation and will be made upon satisfactory completion of services in accordance with federal provisions.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140P1225Q0052_Amd_0002.pdf | ||
| B08_Amendment_0002_Solicitation_Atch_3_Updated_Technical-Experience_Questionnaire_0002.pdf | ||
| A04_0044018312_Updated_map_and_site_images_and_clarification__0001.docx | DOCX document | |
| Sol_140P1225Q0052_Amd_0001.pdf | ||
| B08_Solicitation_Atch_3_Technical-Experience_Questionnaire.xls | XLS spreadsheet | |
| Sol_140P1225Q0052.pdf | ||
| A04_0044018312_CHIC_Fence_Spec.pdf | ||
| A04_0044018312_Att_1_Park_Boundary_Fence_and_Maintenance_Fence_Damaged_by_Tornado.docx | DOCX document | |
| B03_0044018312_Wage_Determinations.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Construction Specification 91—Chain Link Fence
1. Scope The work consists of furnishing and installing chain link fencing complete with all posts, braces, gates, and all other appurtenances.
2. Material The material for the chain link fence shall be as follows:
Galvanized Chain link fence fabric shall conform to the requirements of ASTM A 392, 2-inch mesh and 9-gauge galvanized steel wire. Zinc coating shall be class 2.
Posts and fence framework shall conform to the requirements of ASTM F 1043 Group 1A, for Heavy Industrial Fence. Coatings shall be a type A galvanized coating for internal and external surfaces. Steel pipe posts shall conform to the requirements of ASTM F 1043 and F 1083.
Fence fittings shall conform to the requirements of ASTM F 626. Fittings shall be galvanized steel. Wire ties and clips shall be 9-gauge.
Gates, gateposts, and gate accessories shall conform to the requirements of ASTM F 900. Coating shall be the same as selected for adjoining fence and framework.
3. Removal of Fence and Trees The remaining existing fence and vegetation are to be removed by the contractor. The vegetation corridor shall be on the NPS side of the fence and no wider measured from the fence than 10’.
4. Installing fence posts Unless otherwise specified, line posts shall be placed at intervals of 10 feet measured from center to center of adjacent posts. In determining the post spacing, measurement is made parallel with the ground surface.
Posts shall be set in concrete.
All corner posts, end posts, gateposts, and pull posts shall be embedded or braced in accordance with appropriate industry practice.
5. Installing wire fabric Fencing fabric shall not be stretched until at least 7 days after the posts are set in the concrete.
Fencing fabric shall be installed on the NPS side of the posts.
The fabric shall be stretched taut and securely fastened, by means of tie clips, to the posts at intervals not exceeding 15 inches and to the top rails or tension wires at intervals not exceeding 2 feet. Care shall be taken to equalize the fabric tension on each side of each post.
6. Measurement and payment 2200 LF of chain link fence 1 - 4' walk through gates, 1-10' drive through gate 6' in height, 9 Guage wire heavy duty Poles every 10' min
Payment shall be based upon offered pricing in response to the solicitation, and shall be made upon satisfactory completion of the indicated services, in accordance with all applicable federal clauses and provisions
File details come from the government source that posted it. Updated .