Attachment_0008_Updated_Drawing_0001.pdf

This is a technical drawing specification for end and corner panels used in steel pipe fence installations for the United States Department of the Interior, Bureau of Land Management.

The drawing provides detailed specifications for three fence panel configurations: a three-post corner panel, a two-post end panel, and a stress panel. All panels utilize galvanized pipe construction with specific dimensions and material requirements. Key components include brace clamps (Detail A), space clamps (Details B and C), brace rails, and posts constructed from galvanized steel pipe. The drawing specifies that wires shall be tied to each post using 1/2-gauge wire twisted tight, and all fittings and wire must be galvanized. The panels are designed with precise measurements including post spacing of approximately 7 feet and brace configurations that maintain structural integrity. Detail D illustrates a bar stock brace rail connector measuring 5/8 inches. The document includes notes regarding installation procedures, such as requiring the contracting officer to determine hole locations for rock installations and that other materials may be substituted for clamps with approval. The drawing is dated January 28, 2018, and serves as sheet 3 of 4 in the technical specification set (Drawing No. FOR-CHG-13), indicating it is part of a larger fence construction specification package for Bureau of Land Management facilities.