Rpt_1712662_Chichiltah_N_N_IOC_Cn_Na_F_0002.pdf
PDF 236 KB Posted
- Attached to
- CHICHILTAH BS LANDFILL CLEAN CLOSURE
- Solicitation number
- 140A0922Q0049
About this file
This document contains an analytical report from Hall Environmental Analysis Laboratory regarding water quality testing of two wells, Well 646 and Well 647, located at the Chichiltah BS Landfill in New Mexico. The report provides results of tests conducted on samples from the two wells for compounds including nitrites, nitrates, metals, and anions. Testing was performed using EPA methods 200.7, 200.8, 245.1 and 300.0. The report also includes quality control sample results. Accompanying the analytical report is a related federal contract opportunity notice for clean closure of the Chichiltah BS Landfill located in New Mexico. The solicitation is identified as number 140A0922Q0049 and is issued by the Department of the Interior Bureau of Indian Affairs Navajo Region.
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
January 17, 2018
Division of Env. Cultural & Safety Mgmt.
Genevieve Henry
Dear Genevieve Henry:
RE: Chichiltah BS 093534005 OrderNo.: 1712662
FAX (505) 863-8369
TEL: (505) 863-8330
PO Box 1060 Room 130 Gallup, NM 87305
Hall Environmental Analysis Laboratory 4901 Hawkins NE
Albuquerque, NM 87109
Website: www.hallenvironmental.com
TEL: 505-345-3975 FAX: 505-345-4107
Hall Environmental Analysis Laboratory received 2 sample(s) on 12/12/2017 for the analyses presented in the following report.
Andy Freeman
These were analyzed according to EPA procedures or equivalent. To access our accredited tests please go to www.hallenvironmental.com or the state specific web sites. In order to properly interpret your results, it is imperative that you review this report in its entirety.
See the sample checklist and/or the Chain of Custody for information regarding the sample receipt temperature and preservation. Data qualifiers or a narrative will be provided if the sample analysis or analytical quality control parameters require a flag.
When necessary, data qualifiers are provided on both the sample analysis report and the QC summary report, both sections should be reviewed. All samples are reported, as received, unless otherwise indicated. Lab measurement of analytes considered field parameters that require analysis within 15 minutes of sampling such as pH and residual chlorine are qualified as being analyzed outside of the recommended holding time.
Please don't hesitate to contact HEAL for any additional information or clarifications.
ADHS Cert #AZ0682 -- NMED-DWB Cert #NM9425 -- NMED-Micro Cert #NM0190
Sincerely, Laboratory Manager 4901 Hawkins NE Albuquerque, NM 87109 http://www.hallenvironmental.com http://www.hallenvironmental.com
Location:
Matrix: Aqueous
Collection Date: 12/11/2017 11:00:00 AMFacility: CHICHILT
Analyses Result Qual Units
CLIENT: Division of Env. Cultural & Safety
Lab ID: 1712662-001A
Client Sample ID: Well 646
1/17/2018
Analytical Report 1712662
Date Reported:
Lab Order:
Received Date: 12/12/2017 12:55:00 PM Compliance Safe:
RL MCL DF
Hall Environmental Analysis Laboratory, Inc.
EPA METHOD 300.0: ANIONS Analyst: MRA SDWIS Date Analyzed
Nitrogen, Nitrite (As N) 12/12/2017 8:03:40 PM0.10 mg/L 11.0ND1041 Nitrogen, Nitrate (As N) 12/12/2017 8:03:40 PM0.10 mg/L 110ND1037
Qualifiers: * Value exceeds Maximum Contaminant Level. B Analyte detected in the associated Method Blank D Sample Diluted Due to Matrix E Value above quantitation range H Holding times for preparation or analysis exceeded J Analyte detected below quantitation limits
ND Not Detected at the Reporting Limit P Sample pH Not In Range PQL Practical Quanitative Limit RL Reporting Detection Limit
S % Recovery outside of range due to dilution or matrix W Sample container temperature is out of limit as specified
Collection Date: 12/11/2017 11:00:00 AMFacility: CHICHILT
Analyses Result Qual Units
CLIENT: Division of Env. Cultural & Safety
Lab ID: 1712662-001B
Client Sample ID: Well 646
1/17/2018
Analytical Report 1712662
Date Reported:
Lab Order:
Received Date: 12/12/2017 12:55:00 PM Compliance Safe:
RL MCL DF
Hall Environmental Analysis Laboratory, Inc.
EPA METHOD 200.7: METALS Analyst: pmf SDWIS Date Analyzed
Barium 1/2/2018 8:17:49 PM0.0020 mg/L 12.00.291010 Beryllium 1/2/2018 8:17:49 PM0.0020 mg/L 10.0040ND1075 Cadmium 1/2/2018 8:17:49 PM0.0020 mg/L 10.0050ND1015 Chromium 1/2/2018 8:17:49 PM0.0060 mg/L 10.10ND1020 Sodium 1/2/2018 8:17:49 PM1.0 mg/L 1241052
EPA 200.8: METALS Analyst: JLF SDWIS Date Analyzed
Antimony 1/5/2018 2:47:49 PM0.0010 mg/L 10.0060ND1074 Arsenic 1/5/2018 2:47:49 PM0.0010 mg/L 10.0100.00191005 Selenium 1/12/2018 5:03:39 PM0.0050 mg/L 50.050ND1045 Thallium 12/28/2017 8:05:34 PM0.00050 mg/L 10.0020ND1085
EPA METHOD 245.1: MERCURY Analyst: MED SDWIS Date Analyzed
Mercury 1/5/2018 11:51:30 AM0.00020 mg/L 10.0020ND1035
Qualifiers: * Value exceeds Maximum Contaminant Level. B Analyte detected in the associated Method Blank D Sample Diluted Due to Matrix E Value above quantitation range H Holding times for preparation or analysis exceeded J Analyte detected below quantitation limits
ND Not Detected at the Reporting Limit P Sample pH Not In Range
S % Recovery outside of range due to dilution or matrix W Sample container temperature is out of limit as specified
Collection Date: 12/11/2017 11:00:00 AMFacility: CHICHILT
Analyses Result Qual Units
CLIENT: Division of Env. Cultural & Safety
Lab ID: 1712662-001C
Client Sample ID: Well 646
1/17/2018
Analytical Report 1712662
Date Reported:
Lab Order:
Received Date: 12/12/2017 12:55:00 PM Compliance Safe:
RL MCL DF
Hall Environmental Analysis Laboratory, Inc.
EPA METHOD 300.0: ANIONS Analyst: MRA SDWIS Date Analyzed
Fluoride 12/15/2017 1:53:33 AM0.10 mg/L 14.00.111025
Qualifiers: * Value exceeds Maximum Contaminant Level. B Analyte detected in the associated Method Blank D Sample Diluted Due to Matrix E Value above quantitation range H Holding times for preparation or analysis exceeded J Analyte detected below quantitation limits
ND Not Detected at the Reporting Limit P Sample pH Not In Range
S % Recovery outside of range due to dilution or matrix W Sample container temperature is out of limit as specified
Collection Date: 12/11/2017 11:15:00 AMFacility: CHICHILT
Analyses Result Qual Units
CLIENT: Division of Env. Cultural & Safety
Lab ID: 1712662-002A
Client Sample ID: Well 647
1/17/2018
Analytical Report 1712662
Date Reported:
Lab Order:
Received Date: 12/12/2017 12:55:00 PM Compliance Safe:
RL MCL DF
Hall Environmental Analysis Laboratory, Inc.
EPA METHOD 300.0: ANIONS Analyst: MRA SDWIS Date Analyzed
Nitrogen, Nitrite (As N) 12/12/2017 8:28:31 PM0.10 mg/L 11.0ND1041 Nitrogen, Nitrate (As N) 12/12/2017 8:28:31 PM0.10 mg/L 110ND1037
Qualifiers: * Value exceeds Maximum Contaminant Level. B Analyte detected in the associated Method Blank D Sample Diluted Due to Matrix E Value above quantitation range H Holding times for preparation or analysis exceeded J Analyte detected below quantitation limits
ND Not Detected at the Reporting Limit P Sample pH Not In Range
S % Recovery outside of range due to dilution or matrix W Sample container temperature is out of limit as specified
Collection Date: 12/11/2017 11:15:00 AMFacility: CHICHILT
Analyses Result Qual Units
CLIENT: Division of Env. Cultural & Safety
Lab ID: 1712662-002B
Client Sample ID: Well 647
1/17/2018
Analytical Report 1712662
Date Reported:
Lab Order:
Received Date: 12/12/2017 12:55:00 PM Compliance Safe:
RL MCL DF
Hall Environmental Analysis Laboratory, Inc.
EPA METHOD 200.7: METALS Analyst: pmf SDWIS Date Analyzed
Barium 1/2/2018 8:25:46 PM0.0020 mg/L 12.00.391010 Beryllium 1/2/2018 8:25:46 PM0.0020 mg/L 10.0040ND1075 Cadmium 1/2/2018 8:25:46 PM0.0020 mg/L 10.0050ND1015 Chromium 1/2/2018 8:25:46 PM0.0060 mg/L 10.10ND1020 Sodium 1/2/2018 8:25:46 PM1.0 mg/L 1401052
EPA 200.8: METALS Analyst: JLF SDWIS Date Analyzed
Antimony 1/5/2018 2:54:22 PM0.0010 mg/L 10.0060ND1074 Arsenic 1/5/2018 3:00:56 PM0.0050 mg/L 50.010ND1005 Selenium 1/12/2018 5:08:33 PM0.010 mg/L 100.050ND1045 Thallium 12/28/2017 8:12:08 PM0.00050 mg/L 10.0020ND1085
EPA METHOD 245.1: MERCURY Analyst: MED SDWIS Date Analyzed
Mercury 1/5/2018 11:53:31 AM0.00020 mg/L 10.0020ND1035
Qualifiers: * Value exceeds Maximum Contaminant Level. B Analyte detected in the associated Method Blank D Sample Diluted Due to Matrix E Value above quantitation range H Holding times for preparation or analysis exceeded J Analyte detected below quantitation limits
ND Not Detected at the Reporting Limit P Sample pH Not In Range
S % Recovery outside of range due to dilution or matrix W Sample container temperature is out of limit as specified
Collection Date: 12/11/2017 11:15:00 AMFacility: CHICHILT
Analyses Result Qual Units
CLIENT: Division of Env. Cultural & Safety
Lab ID: 1712662-002C
Client Sample ID: Well 647
1/17/2018
Analytical Report 1712662
Date Reported:
Lab Order:
Received Date: 12/12/2017 12:55:00 PM Compliance Safe:
RL MCL DF
Hall Environmental Analysis Laboratory, Inc.
EPA METHOD 300.0: ANIONS Analyst: MRA SDWIS Date Analyzed
Fluoride 12/15/2017 2:18:21 AM0.10 mg/L 14.00.121025
Qualifiers: * Value exceeds Maximum Contaminant Level. B Analyte detected in the associated Method Blank D Sample Diluted Due to Matrix E Value above quantitation range H Holding times for preparation or analysis exceeded J Analyte detected below quantitation limits
ND Not Detected at the Reporting Limit P Sample pH Not In Range
S % Recovery outside of range due to dilution or matrix W Sample container temperature is out of limit as specified
Project: Chichiltah BS 093534005 Client: Division of Env. Cultural & Safety Mgmt.
17-Jan-18
QC SUMMARY REPORT 1712662WO#:
Hall Environmental Analysis Laboratory, Inc.
Sample ID MB-B
Batch ID: B48123
Analysis Date: 1/2/2018Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: PBW RunNo: 48123
SeqNo: 1544026
MBLKSampType: TestCode: EPA Method 200.7: Metals
Barium 0.0020ND Beryllium 0.0020ND Cadmium 0.0020ND Chromium 0.0060ND Sodium 1.0ND
Sample ID LCS-B
Batch ID: B48123
Analysis Date: 1/2/2018Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: LCSW RunNo: 48123
SeqNo: 1544030
LCSSampType: TestCode: EPA Method 200.7: Metals
Barium 0.5000 97.4 85 1150.0020 00.49 Beryllium 0.5000 104 85 1150.0020 00.52 Cadmium 0.5000 99.1 85 1150.0020 00.50 Chromium 0.5000 101 85 1150.0060 00.51 Sodium 50.00 101 85 1151.0 050
Qualifiers:
* Value exceeds Maximum Contaminant Level. B Analyte detected in the associated Method Blank D Sample Diluted Due to Matrix E Value above quantitation range H Holding times for preparation or analysis exceeded J Analyte detected below quantitation limits
ND Not Detected at the Reporting Limit P Sample pH Not In Range
S % Recovery outside of range due to dilution or matrix W Sample container temperature is out of limit as specified
17-Jan-18
QC SUMMARY REPORT 1712662WO#:
Hall Environmental Analysis Laboratory, Inc.
Sample ID LCS
Batch ID: A48088
Analysis Date: 12/28/2017Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: LCSW RunNo: 48088
SeqNo: 1541519
LCSSampType: TestCode: EPA 200.8: Metals
Thallium 0.01250 96.2 85 1150.00050 00.012
Sample ID MB
Batch ID: A48088
Analysis Date: 12/28/2017Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: PBW RunNo: 48088
SeqNo: 1541521
MBLKSampType: TestCode: EPA 200.8: Metals
Thallium 0.00050ND
Sample ID MB
Batch ID: B48247
Analysis Date: 1/5/2018Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: PBW RunNo: 48247
SeqNo: 1549248
MBLKSampType: TestCode: EPA 200.8: Metals
Antimony 0.0010ND Arsenic 0.0010ND
Sample ID LCS
Batch ID: B48247
Analysis Date: 1/5/2018Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: LCSW RunNo: 48247
SeqNo: 1549250
LCSSampType: TestCode: EPA 200.8: Metals
Antimony 0.02500 98.9 85 1150.0010 00.025 Arsenic 0.02500 98.7 85 1150.0010 00.025
Sample ID MB
Batch ID: B48432
Analysis Date: 1/12/2018Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: PBW RunNo: 48432
SeqNo: 1557035
MBLKSampType: TestCode: EPA 200.8: Metals
Selenium 0.0010ND
Sample ID LCS
Batch ID: B48432
Analysis Date: 1/12/2018Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: LCSW RunNo: 48432
SeqNo: 1557037
LCSSampType: TestCode: EPA 200.8: Metals
Selenium 0.02500 95.3 85 1150.0010 00.024
Qualifiers:
* Value exceeds Maximum Contaminant Level. B Analyte detected in the associated Method Blank D Sample Diluted Due to Matrix E Value above quantitation range H Holding times for preparation or analysis exceeded J Analyte detected below quantitation limits
ND Not Detected at the Reporting Limit P Sample pH Not In Range
S % Recovery outside of range due to dilution or matrix W Sample container temperature is out of limit as specified
17-Jan-18
QC SUMMARY REPORT 1712662WO#:
Hall Environmental Analysis Laboratory, Inc.
Sample ID MB-35848
Batch ID: 35848
Analysis Date: 1/5/2018Prep Date: 1/4/2018
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: PBW RunNo: 48223
SeqNo: 1548379
MBLKSampType: TestCode: EPA Method 245.1: Mercury
Mercury 0.00020ND
Sample ID LCS-35848
Batch ID: 35848
Analysis Date: 1/5/2018Prep Date: 1/4/2018
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: LCSW RunNo: 48223
SeqNo: 1548380
LCSSampType: TestCode: EPA Method 245.1: Mercury
Mercury 0.005000 99.8 80 1200.00020 00.0050
Qualifiers:
* Value exceeds Maximum Contaminant Level. B Analyte detected in the associated Method Blank D Sample Diluted Due to Matrix E Value above quantitation range H Holding times for preparation or analysis exceeded J Analyte detected below quantitation limits
ND Not Detected at the Reporting Limit P Sample pH Not In Range
S % Recovery outside of range due to dilution or matrix W Sample container temperature is out of limit as specified
17-Jan-18
QC SUMMARY REPORT 1712662WO#:
Hall Environmental Analysis Laboratory, Inc.
Sample ID MB
Batch ID: R47752
Analysis Date: 12/12/2017Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: PBW RunNo: 47752
SeqNo: 1526658 mblkSampType: TestCode: EPA Method 300.0: Anions
Nitrogen, Nitrite (As N) 0.10ND Nitrogen, Nitrate (As N) 0.10ND
Sample ID LCS
Batch ID: R47752
Analysis Date: 12/12/2017Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: LCSW RunNo: 47752
SeqNo: 1526659 lcsSampType: TestCode: EPA Method 300.0: Anions
Nitrogen, Nitrite (As N) 1.000 96.7 90 1100.10 00.97 Nitrogen, Nitrate (As N) 2.500 98.5 90 1100.10 02.5
Sample ID MB
Batch ID: A47810
Analysis Date: 12/15/2017Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: PBW RunNo: 47810
SeqNo: 1529397 mblkSampType: TestCode: EPA Method 300.0: Anions
Fluoride 0.10ND
Sample ID LCS
Batch ID: A47810
Analysis Date: 12/15/2017Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: LCSW RunNo: 47810
SeqNo: 1529398 lcsSampType: TestCode: EPA Method 300.0: Anions
Fluoride 0.5000 105 90 1100.10 00.53
Sample ID 1712662-002CMS
Batch ID: A47810
Analysis Date: 12/15/2017Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: Well 647 RunNo: 47810
SeqNo: 1529408 msSampType: TestCode: EPA Method 300.0: Anions
Fluoride 0.5000 98.8 68.4 1120.10 0.12120.62
Sample ID 1712662-002CMSD
Batch ID: A47810
Analysis Date: 12/15/2017Prep Date:
Analyte Result SPK value SPK Ref Val %REC %RPDLowLimit HighLimit RPDLimit Qual
Units: mg/L
PQL
Client ID: Well 647 RunNo: 47810
SeqNo: 1529409 msdSampType: TestCode: EPA Method 300.0: Anions
Fluoride 0.5000 99.9 68.4 112 200.10 0.1212 0.8490.62
Qualifiers:
* Value exceeds Maximum Contaminant Level. B Analyte detected in the associated Method Blank D Sample Diluted Due to Matrix E Value above quantitation range H Holding times for preparation or analysis exceeded J Analyte detected below quantitation limits
ND Not Detected at the Reporting Limit P Sample pH Not In Range
S % Recovery outside of range due to dilution or matrix W Sample container temperature is out of limit as specified
| HALL-CoverLetter_Ext |
| BaseRpt-Hall-Chem-DW |
| SubContractor_1712662_DOC011718-002_v1.pdf |
| HALL - QC_ByTestCodeRpt_Ext |
| COC_1712662_1712662_v1.pdf |
File details come from the government source that posted it. Updated .