1305M223QNWWG0217.pdf

RFQ IFB RFP

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODEFACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF.

DATED . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

OFFER

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

17a CONTRACTOR/

OFFEROR.

CODE

8 (A)

SIZE STANDARD:

NAICS:

% FOR:SET ASIDE:UNRESTRICTED OR

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

10. THIS ACQUISITION IS

EDWOSB

SMALL BUSINESS PROGRAM

NW-WG1000-23-00923

1305M223QNWWG0217

HOLLY FERGUSON

HOLLY.FERGUSON@NOAA.GOV 757-441-3436

12:00 PM ET

AJ830023

NOAA/AGO/EAD

601 E 12TH STREET

ROOM 1734

KANSAS CITY MO 64106

561621

$25.0M

WG100001

RADAR OPERATIONS CENTER /W/OBS1

1200 WESTHEIMER DRIVE

NORMAN OK 73069-7902

see continuation page for line item details.

See Schedule

SEP 07, 2023

Please

STANDARD FORM 1449 (REV. 2/2012) BACK

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

40. PAID BY

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELPHONE NUMBER OF AUTHORZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

PARTIAL FINAL

37. CHECK NUMBER

38. S/R ACCOUNT NO. 39. S/R VOUCHER NUMBER

36. PAYMENT

COMPLETE PARTIAL FINAL

1305M223QNWWG0217

SCHEDULE Continued

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Offers in response to this solicitation shall be submitted electronically via email by the date listed in the solicitation to the following Government representatives:

Holly Ferguson at Holly.Ferguson@noaa.gov and Jackie Shewmaker at Jackie.A.Shewmaker@noaa.gov. It is the offeror's responsibility to ensure that any submission transmitted to the specified Government representatives is received prior to the due date specified. Offerors are highly encouraged to contact the Government representative prior to the stated time and date in the solicitation for receipt of offers to ensure the Government has received the submission. Offers received after the date and time specified may be excluded from consideration.

The Government intends to establish a single award contract for installation and maintenance in accordance with Federal Acquisition Regulation (FAR) Part 12.

For pricing purposes, period of performance (POP) should be quoted as October 1, 2023 - September 30, 2024 and include options.

0001 Facility access card readers including equipment, parts, materials, installation, and licenses, if applicable.

1.00 JB

0002 Video surveillance including equipment, parts, materials, installation, and licenses, if applicable.

1.00 JB

0003 Spares - one (1) of each type of equipment

1.00 LO

0004 Monthly preventative maintenance/maintenance of entire system and off-site security monitoring.

Period of Performance: 10/01/2023 to 09/30/2024

12.00 MO

OPT

1001 Option Period 1: Monthly preventative maintenance/ maintenance of entire system and off-site security monitoring.

Period of Performance: 10/01/2024 to 09/30/2025

12.00 MO

OPT

2001 Option Period 2: Monthly preventative maintenance/ maintenance of entire system and off-site security monitoring.

Period of Performance: 10/01/2025 to 09/30/2026

12.00 MO

OPT

3001 Option Period 3: Monthly preventative maintenance/ maintenance of entire system and off-site security monitoring.

Period of Performance: 10/01/2026 to 09/30/2027

12.00 MO

OPT

4001 Option Period 4: Monthly preventative maintenance/ maintenance of entire system and off-site security monitoring.

Period of Performance: 10/01/2027 to 09/30/2028

12.00 MO

PAGE 3 OF 58 1305M223QNWWG0217

Table of Contents

Statement of Objectives

Addendum 52.212-1

Addendum 52.212-2

WAGE DETERMINATION 2015-5315, REVISION 21

52.203-3 GRATUITIES (APR 1984)

52.203-17CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER

RIGHTS (JUN 2020)

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON POSTCONSUMER FIBER CONTENT PAPER (MAY 2011)

52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2018)

52.204-9 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (JAN 2011)

52.204-13SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018)

52.204-16COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (AUG 2020)

52.204-18COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (AUG 2020)

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014)

52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS (OCT 2018)

52.212-4CONTRACT TERMS AND CONDITIONS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC 2022)

52.223-5 POLLUTION PREVENTION AND RIGHT-TO-KNOW INFORMATION (MAY 2011)

52.223-18ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (JUN 2020)

52.223-20 AEROSOLS (JUN 2016)

52.228-5 INSURANCE--WORK ON A GOVERNMENT INSTALLATION (JAN 1997)

52.232-1 PAYMENTS (APR 1984)

52.232-18 AVAILABILITY OF FUNDS (APR 1984)

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUNE 2013)

52.232-40PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (MAR 2023)

52.233-1 DISPUTES (MAY 2014)

52.237-2 PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT, AND VEGETATION (APR 1984)

52.242-13 BANKRUPTCY (JUL 1995)

52.242-15 STOP-WORK ORDER (AUG 1989)

52.245-9 USE AND CHARGES (APR 2012)

1352.209-72 RESTRICTIONS AGAINST DISCLOSURE (APR 2010)

1352.209-73 COMPLIANCE WITH THE LAWS (APR 2010)

1352.209-74 ORGANIZATIONAL CONFLICT OF INTEREST (APR 2010)

52.204-24REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT

(NOV 2021)

52.204-27PROHIBITION ON A BYTEDANCE COVERED APPLICATION (JUNE 2023)

52.212-3OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC

2022)

52.212-5CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES (JUN 2023)

52.216-1 TYPE OF CONTRACT (APR 1984)

52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

1352.201-70 CONTRACTING OFFICER´s AUTHORITY (APR 2010)

1352.228-70 INSURANCE COVERAGE (APR 2010)

1352.233-70 AGENCY PROTESTS (APR 2010)

1352.246-70 PLACE OF ACCEPTANCE (APR 2010)

1330-52.222-70NOAA SEXUAL ASSAULT AND SEXUAL HARASSMENT PREVENTION AND RESPONSE POLICY (MAY 2018)... 51

1330-52.232-72NOAA Transition to the Invoice Processing Platform Electronic Invoicing System (Feb 2023) 53

1330-52.237-70CONTRACTOR COMMUNICATIONS

PAGE 4 OF 58 1305M223QNWWG0217

Table of Contents

1330-52.237-71NOAA GOVERNMENT-CONTRACTOR RELATIONS - NON-PERSONAL SERVICES CONTRACT (SEPT 2017)

1330-52.237-72CONTRACTOR ACCESS TO NOAA FACILITIES (SEPT 2017)

1330-52.270-304NOAA ACQUISITION AND GRANTS OFFICE OMBUDSMAN (OCT 2022)

1352.270-70 PERIOD OF PERFORMANCE (APR 2010)

1352.233-71 GAO AND COURT OF FEDERAL CLAIMS PROTESTS (APR 2010)

1352.201-72 CONTRACTING OFFICER`S REPRESENTATIVE (COR) (APR 2010)

PAGE 5 OF 58 1305M223QNWWG0217

CLAUSES

Statement of Objectives

PAGE 6 OF 58 1305M223QNWWG0217

Statement of Work

Replacement of Facility Video Surveillance Cameras and Access Control Card Readers, Preventative Maintenance/Maintenance, and Off-Site Monitoring at the ROC

Background

The National Weather Service (NWS) Radar Operations Center (ROC) has a requirement to replace its failing analog facility security video surveillance system and access card readers campus-wide to include the radar shelters, equipment maintenance, and off-site monitoring with option years. The ROC is located at 1200 Westheimer Drive in Norman, Oklahoma. Comprised of multiple buildings and weather-radar testbed shelters, work shall be conducted at Buildings (Bldg.)

375, 600, and 366 the Kansas City Research Institute (KCRI) radar testbed compound located approximately 200 feet north of Bldg. 375. Fiber optic cabling termination boxes and transreceivers are located in Bldg. 375, 600, 366, and the KCRI radar shelter. The location is a Level 2 Federal facility protected under the security guidance of the Department of Homeland Security Federal Protective Services (DHS FPS).

The ROC supports the Next Generator Weather Radar (NEXRAD) program, which is a network of 160 high-resolution S-Band Doppler weather radars jointly operated by the NWS, the Federal Aviation Administration (FAA), and the United States Air Force known as the Tri-Agency. The NEXRAD program provides the NWS with the ability to accurately detect, analyze, and forecast weather events in support of local warning and forecast and safety of flight operations overseen by the Tri-Agency. The NEXRAD program provides essential data needed to achieve Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), and NWS objectives and goals. NEXRAD data underpins NWS forecast/warning services-critical for meeting WeatherReady Nation goal to protect life and property, and reduce disruption from high-impact weather events. The continuous availability of a reliable security and video surveillance system is a critical element supporting the NWS mission. This procurement action supports DOC Office of OSY and DHS FPS security standards by controlling and monitoring the physical security of the ROC.

All video surveillance system and facility access card reader equipment need to be replaced with new technology. Replacement system must be National Defense Authorization Act (NDAA) complaint, (FIPS) compliant, and be compatible with our existing fiber optic cabling. The existing layout and function should not change. Current equipment list will be available upon request.

The Contractor shall provide all permits, materials, equipment, necessary accessories, and labor as necessary to perform all work for this requirement.

All work in performance of this requirement shall be completed by skilled workers and be deemed acceptable by the Facility Manager.

All work and power outages, if necessary, shall be coordinated and scheduled in advance with the Facility Manager.

PAGE 7 OF 58 1305M223QNWWG0217

Contractor shall take precautions to protect existing structures. Damage caused by the Contractor to existing structures and site features shall be repaired and/or replaced by the Contractor at no additional cost to the Government, and shall be repaired and/or replaced to the satisfaction of the Facility Manager.

Contractor must be able to maintain and repair any newly installed equipment for the duration of this contract campus-wide including 1424 Halley Avenue and 1313 Halley Circle as well as the equipment located at the ROC Radar Site. All of these facilities are within approximately 250 feet of each other.

Contractor must maintain Security Software site support agreement for the term of this contract.

Contractor shall provide routine preventative maintenance/inspections, maintenance services, and non-emergency service during regular business hours of 8:00 a.m. to 4:00 p.m. Monday through Friday (excluding Federal Holidays) and Emergency service/repair 24 hours per day/ 365 days per year. Emergency service is defined as any service necessary due to failure of a critical item, thus placing the ROC without adequate security, i.e. unsecured exterior door, major system failure, malfunctioning alarms, etc. Contractor response time to the system site for Nonemergency service is on average within 24 hours. Contractor response time to the system site for Emergency service is on average within 2 hours.

Contractor shall without additional charge to the Government, furnish all necessary service, including labor, parts and materials to maintain against normal wear and tear for the Security System. All necessary repairs caused by other sources, i.e.: vandalism, abuse, outside sources, etc., will be charged to the Government at current standard rates for time and material.

Contractor shall keep spare equipment available in inventory for the exclusive use of the ROC for all major equipment used in any portion of the security system. Any critical equipment component deemed un-repairable on site shall be replaced with a contractor provided loaner unit within 8 hours of the Customers original Emergency service request.

Contractor shall be an authorized reseller and service agent of each manufacturer utilized in the ROC Security System. Contractor shall provide proof of manufacturer’s authorization upon request of the NWS.

Requests for installation of new equipment other than specified above will be negotiated with customer.

Contractor shall test any newly installed equipment upon installation to verify proper functioning.

In addition, contractor shall test equipment twice per year to ensure operations of the system are working properly. All equipment will become the property of the ROC and tagged as government property.

The Contractor shall perform off-site monitoring for the after-hours alarm system and panic alarms. After-hours is considered when the building alarms are set between 6:00 pm – 6:00 am CST. Access to the building after-hours requires a passcode. Multiple zones within the buildings shall monitored for unusual and suspicious activity including, but not limited to glass break points, PAGE 8 OF 58 1305M223QNWWG0217 roof activity, etc. The ROC has an onsite hotline to provide 24/7 support to weather forecast offices throughout the United States as well as internationally. The hotline area is equipped with a panic alarm. Additionally, the guard station is also equipped with a panic alarm. Both panic alarms are active 24/7.

The contract will be awarded as one base and four (4) one-year options for the maintenance and off-site monitoring. Replacement system equipment and installation will be included in the period of performance of the base year.

Base Year: October 1, 2023 – September 30, 2024 Option Year 1: October 1, 2024 – September 30, 2025 Option Year 2: October 1, 2025 – September 30, 2026 Option Year 3: October 1, 2026 – September 30, 2027 Option Year 4: October 1, 2027 – September 30, 2028

Site visits can be scheduled on Wednesday, August 30th; Thursday, August 31st; Friday, September 1st; or Tuesday, September 5, 2023 between 9:00 am – 1:00 pm CST. All site visits must be coordinated through the Facility Manager Janine McKissick. All visitors will be required to sign in and sign out with ROC Security Desk, obtain a visitor’s badge, and be escorted when entering a building, gate-secured, or otherwise enclosed space including KCRI radar testbed shelters. The ROC Security Desk is located at the Adair Building located at 1200 Westheimer Drive, Norman, OK. Details are listed below.

Janine McKissick 1200 Westheimer Dr., Norman, OK 73069

Phone: (405) 573-8821 Email: janine.mckissick@noaa.gov

Equipment Specifications

Overview:

The video surveillance camera and needed components should be Avigilon brand or equivalent.

The facility access card readers and needed components should be HID Global HID multi-class contactless SE or equal, capable of controlling facility access by scanning and authenticating a smart card.

See the salient characteristics below for major characteristics of each component.

1. Facility Access Control Readers and Reader Software Module:

The facility access card readers shall be supported by an included software module designed to read, validate, and authenticate access cards from the readers to the control workstation.

PAGE 9 OF 58 1305M223QNWWG0217

This capability requires a workstation and server to operate. The Government does not have a preference for the server brand and workstation.

1.1. Server: Qty. 1

1.1.1. The server shall be configured to run and support the reader software module for HID

Global Smart Card Software or equivalent.

1.1.2. The server shall support the manufacturer recommended system specifications for the HID iCLASS SE RK40 smart card readers.

1.1.3. The contractor shall provide the rack to mount the server. The rack shall be capable of holding the unit, wall mountable, lockable, with dual fans.

1.2. Workstation: Qty. 1

1.2.1. Workstation shall be able to run and support the reader software module for HID

Global Smart Card Software or equivalent.

1.2.2. Microsoft Windows Server 2016, 2012, 2008 and Microsoft Windows 10, 8.1, 7.

1.2.3. Interoperable with any SQL database supported by the Microsoft .NET

Framework 2.0, including Oracle, Microsoft SQL Server.

1.2.4. CPU: 1.8 GHz.

1.2.5. Hard Disk Space: 1TB.

1.2.6. RAM: 128 GB.

1.3. HID Global Smart Card Software: Qty. 1 - Brand name or equivalent

1.3.1. Software shall integrate with the card readers to authenticate, read, and validate smart cards from the readers.

1.3.2. The contractor shall obtain the required software licenses for software usage.

1.3.3. Microsoft Windows Server 2016, 2012, 2008 and Microsoft Windows 10, 8.1, 7.

1.3.4. Interoperable with any SQL database supported by the Microsoft .NET

Framework 2.0, including Oracle, Microsoft SQL Server.

1.3.5. CPU: 1.8 GHz.

1.3.6. Hard Disk Space: 40 GB.

1.3.7. RAM: 1 GB.

1.4. HID Global iCLASS SE RK40 with numerical keypad. Qty. 27 - Brand name or equivalent

1.4.1. The units shall be 13.56 MHz contactless, proximity smart card readers with numerical keypads.

1.4.2. The units shall support Personal Identification Number (PIN) match at the panel.

1.4.3. The protocol for the units shall be Open Supervised Device Protocol (OSDP) mode and Wiegand or Clock & Data modes.

1.4.4. The units shall be able to mount to interior and exterior surfaces.

1.4.5. The units on the exterior shall use IP65 mounting gaskets for outdoor installation.

1.4.6. The units shall be mounted to the manufactures’ specification.

1.4.7. The units shall have anti-tamper screws and the security tool (Recommend Part

HID 04-0001-03) shall be provided to the COR.

PAGE 10 OF 58 1305M223QNWWG0217

1.4.8. The contractor shall provide all required cables, conductors, linear DC power supply.

1.4.9. The units shall use metal junction boxes.

1.4.10. The units shall have the manufacturer required reader spacers for mounting.

1.4.11. The units shall be installed with the manufacture specified back boxes.

2. Video Surveillance Components and Software:

2.1. Avigilon ACC7-ENT single camera video management software licenses. Qty. 45 - Brand name or equivalent

2.1.1. The unit shall provide all licenses required for camera video management software.

2.1.2. The unit shall provide all licenses that grant permission to utilize software for video surveillance needs.

2.2. Avigilon 4.0C-H5A-BO1-IR 4mp bullet camera with Infrared Radiation (IR). Qty. 15 - Brand name or equivalent

2.2.1. The unit shall have at a minimum a maximum resolution of 4 MP, (16:9) 2560 x 1440 (4:3) 2304 x 1728.

2.2.2. The unit shall have at a minimum a maximum image rate of (50 Hz/60 Hz): 25 fps/30 fps.

2.2.3. The unit shall have at a minimum a Lens and IR Illumination of 50 m (164 ft) full tele, 30 m (98 ft) full wide.

2.2.4. The unit shall have an adjustable white balance with an automatic and manual option.

2.2.5. The unit shall be powered by a POE+ interface.

2.2.6. The unit shall use no more than 13W of power.

2.2.7. The unit shall have an interface of 100baseT or higher and a RJ45 connector.

2.2.8. The unit shall have an iris control with an automatic, open, and close option.

2.2.9. The unit shall have a camera tamper detection capability.

2.2.10. The unit shall be IP66, IP67, and IK10 Complaint.

2.2.11. The unit shall provide the following image compression types: H.264 HDSM

SmartCodec, H.265 HDSM Smart Codec, and Motion JPEG.

2.2.12. The unit shall be capable of video streaming: Multi-stream H.264, Multi-stream

H.265, Motion JPEG.

2.3. Avigilon H4-BO-JBOX1 camera back boxes. Qty. 15 - Brand name or equivalent

2.3.1. The unit shall be compatible with selected camera system.

2.3.2. The unit shall have at least 2 - ¾” NTP entry holes for cable connections.

2.3.3. The unit shall be IP66 complaint.

2.4. Avigilon 4.0C-H5A-DO1-IR 4mp dome camera with IR. Qty. 14 - Brand name or equivalent

PAGE 11 OF 58 1305M223QNWWG0217

2.4.1. The unit shall have at a minimum a maximum resolution of 4 MP, (16:9) 2560 x 1440 (4:3) 2304 x 1728.

2.4.2. The unit shall have at a minimum a maximum image rate of (50 Hz/60 Hz): 25 fps/30 fps.

2.4.3. The unit shall have a lens and IR illumination of 30 m (98 ft) full tele, 15 m (49

ft) full wide.

2.4.4. The unit shall have white balance with automatic and manual options.

2.4.5. The unit shall have iris control with an automatic, open, and close options.

2.4.6. The unit shall have camera tamper detection capability.

2.4.7. The unit shall be IP66, IP67, and IK10 Complaint.

2.4.8. The unit shall have an interface of 100baseT or higher and a RJ45 connector.

2.4.9. The unit shall be powered by a POE+ interface.

2.4.10. The unit shall use no more than 13W of power.

2.4.11. The unit shall provide the following image compression types: H.264 HDSM

SmartCodec, H.265 HDSM Smart Codec, and Motion JPEG.

2.4.12. The unit shall be capable of video streaming: Multi-stream H.264, Multi-stream

H.265, Motion JPEG.

2.5. Avigilon 4.0C-H5A-PTZ-DP36 4mp pan/tilt/zoom (ptz) dome camera with IR. Qty. 16 - Brand name or equivalent

2.5.1. The unit shall be capable of pan viewing 360 degree at 300 degrees per second.

2.5.2. The unit shall be capable of tilt viewing -10 degrees to 90 degrees at 300 degrees per second.

2.5.3. The unit shall have an image rate of up to 30 fps.

2.5.4. The unit shall be capable of a zoom factor of 36x with image stabilization off and

30x with image stabilization on.

2.5.5. The unit shall have white balance with automatic and manual options.

2.5.6. The unit shall have iris control with an automatic, open, and close options.

2.5.7. The unit shall have camera tamper detection capability.

2.5.8. The unit shall be IP66, IP67, and IK10 Complaint.

2.5.9. The unit shall have an interface of 100baseT or higher and a RJ45 connector.

2.5.10. The unit shall be powered by a POE+ interface.

2.5.11. The unit shall use no more than 30W of power.

2.5.12. The unit shall provide the following image compression types: H.264 HDSM

SmartCodec, H.265 HDSM Smart Codec, and Motion JPEG.

2.5.13. The unit shall be capable of video streaming: Multi-stream H.264, Multi-stream

H.265, Motion JPEG.

2.6. Avigilon IRPTZ-MNT-NPTA1 pendant adapters. Qty. 16 - Brand name or equivalent

2.6.1. The unit shall be usable indoors and outdoors.

2.6.2. The unit shall be compatible with selected dome and PTZ cameras.

2.6.3. The unit shall have a ¾” NTP thread Conduit entry on the top of the adapter.

PAGE 12 OF 58 1305M223QNWWG0217

2.7. Avigilon IRPTZ-MNT-WALL1 wall mounts. Qty. 16 - Brand name or equivalent

2.7.1. The unit shall be usable indoors and outdoors.

2.7.2. The unit shall be compatible with selected dome and PTZ cameras.

2.7.3. The unit shall have a ¾” NTP conduit entry on the base of the fall mount.

2.8. Avigilon POE-INJ2-60W-NA 60 watt PoE injectors. Qty. 16 - Brand name or equivalent

2.8.1. The unit shall have a RJ-45 connector that conforms to the EIA 568A and 568B standards.

2.8.2. The unit shall support a maximum pass through data rate of 1GB.

2.8.3. The unit shall supply 55VDC on the (7/8) and (4/5) spare wire pairs.

2.8.4. The unit shall have indicators for AC and channel power.

2.8.5. The unit shall use standard 110VAC as input power.

2.9. Avigilon NVR5-VAL-24TB-NA video server. Qty. 1 - Brand name or equivalent

2.9.1. The unit shall have a minimum of 16 Gb of memory.

2.9.2. The unit shall be capable of Raid 5.

2.9.3. The unit shall have a minimum of up to (4) four 3.5” hard drives.

2.9.4. The unit’s hard drives shall be hot swappable.

2.9.5. The unit shall have 24TB of video storage while using RAID 5.

2.9.6. The unit shall have a 300 Mbps recording rate.

2.9.7. The unit shall have Windows 10 operating system.

2.9.8. The unit shall have (2) two 1Gb Ethernet ports.

2.9.9. The unit shall have a minimum of two (2) USB ports to support a USB keyboard and a mouse.

2.9.10. The unit shall have a minimum of one (1) VGA view port.

2.9.11. The unit shall have software for appearance search and facial recognition capability.

2.9.12. The unit shall be pre-loaded with Avigilon Control Center (ACC) or Equal control center that provides the software needed for camera configuration and search/facial recognition capabilities.

2.9.13. The unit’s Control center software shall support a minimum of 45 cameras.

2.10. Avigilon HD-NVR-ANK2-1 appearance search license. Qty. 1 - Brand name or equivalent

2.10.1. The unit shall be compatible with the chosen NVR server.

2.10.2. The unit shall have the ability to face recognition.

2.10.3. The offer shall deliver all license(s) required to use appearance search software.

2.11. Avigilon RM6-WKS-2MN-NA client workstations. Qty. 1 - Brand name or equivalent

2.11.1. The unit shall have two (2) display ports.

2.11.2. The unit shall have Windows 10 installed.

PAGE 13 OF 58 1305M223QNWWG0217

2.11.3. The unit shall have an operating system hard drive installed and a separate Video data hard drive installed.

2.11.4. The unit’s Video data hard drive shall be a minimum of 4TB.

2.11.5. The unit’s Operating system hard drive shall be a minimum of 250GB.

2.11.6. The unit shall have a minimum of 8 Gb of RAM.

2.11.7. The unit shall have a minimum of 4 USB ports.

2.11.8. The unit shall have a minimum of 1 Gb Ethernet port.

2.11.9. The unit shall have and DVD-RW drive.

2.11.10. The unit shall be pre-loaded with Avigilon Control Center (ACC) or Equal control center that provides the software needed for camera configuration and search/facial recognition capabilities.

2.11.11. The unit shall use standard 120VAC input power.

2.12. Avigilon RM6-WKS-4MN-NA client workstations. Qty. 1 - Brand name or equivalent

2.12.1. The unit shall have four (4) display ports.

2.12.2. The unit shall have Windows 10 installed.

2.12.3. The unit shall have an operating system hard drive installed and a separate Video data hard drive installed.

2.12.4. The unit’s Video data hard drive shall be a minimum of 4TB.

2.12.5. The unit’s Operating system hard drive shall be a minimum of 250GB.

2.12.6. The unit shall have a minimum of 8 Gb of RAM.

2.12.7. The unit shall have a minimum of four (4) USB ports.

2.12.8. The unit shall have a minimum of 1 Gb Ethernet port.

2.12.9. The unit shall have and DVD-RW drive.

2.12.10. The unit shall be pre-loaded with Avigilon Control Center (ACC) or Equal control center that provides the software needed for camera configuration and search/facial recognition capabilities.

2.12.11. The unit shall use standard 120VAC input power.

2.13. Avigilon ACC-USB-JOY-PRO joystick camera controller. Qty. 3 - Brand name or equivalent

2.13.1. The unit shall allow complete control of selected camera from the joystick camera controller.

2.13.2. The unit shall be compatible with video management software.

2.13.3. The unit shall attach to the server’s USB port.

2.14. 19" color HD video monitors. Qty. 7 - Brand name or equivalent

2.14.1. The unit shall be no smaller than a 19" LCD Monitor.

2.14.2. The unit shall be capable of mounting to a wall.

2.14.3. The unit shall have an HDMI port.

2.14.4. The unit shall have a resolution of 1 Megapixel.

2.14.5. The unit shall have a standard aspect ratio of 5:4.

PAGE 14 OF 58 1305M223QNWWG0217

2.14.6. The unit shall use standard 110VAC power.

2.14.7. The units shall be placed in the Bldg. 375 Lobby Counter Workstation (this unit shall have a monitor stand, it will not be mounted to a wall), Bldg. 375_Room 133, Bldg. 375_Room 144, Bldg. 375_Room 145, Bldg. 375_Room 145C, and the KCRI Radar Shelter, Qty. 2.

2.14.8. The units in the KCRI Shelter shall display the interior camera of the radome for the test team to monitor the radar from the shelter.

2.14.9. All of units shall have a split screen display in the existing configuration showing multiple camera.

2.15. 43" color HD video monitors. Qty. 3 - Brand name or equivalent

2.15.1. The unit shall be no smaller than a 43″ LCD Monitor.

2.15.2. The unit shall be mounted on a monitor stand.

2.15.3. The unit shall have a resolution of 4K UHD.

2.15.4. The unit shall have an HDMI port.

2.15.5. The unit shall have a widescreen aspect ratio of 16:9.

2.15.6. The units shall be placed on at the Bldg. 375 Lobby Counter to display the camera.

3. Other infrastructure parts needed

3.1. PSA-RX9401, Receiver Box. Qty. 1 - Brand name or equivalent

3.1.1. The unit shall have an HDMI video port.

3.1.2. The unit shall support H.265/H264 Compression technology.

3.1.3. The unit shall support up to 16 channel IP camera input.

3.1.4. The unit shall support an output of at least 4K resolution.

3.2. PSA-SFP-26A, Fiber Ethernet Connectors. Qty. 8 - Brand name or equivalent

3.2.1. The unit shall be a small form-factor pluggable fiber transceiver.

3.2.2. The unit shall have a transmission medium of multimode fiber.

3.2.3. The unit shall have a transmit wavelength of 1310 nm and receive wavelength of

1550 nm.

3.2.4. The unit shall have a speed of 100 Mbps.

3.3. PSA-SFP-26B, Fiber Ethernet Connectors Qty. 8

3.3.1. The unit shall be a small form-factor pluggable fiber transceiver.

3.3.2. The unit shall have a transmission medium of multimode fiber.

3.3.3. The unit shall have a transmit wavelength of 2550 nm and receive wavelength of

1310 nm.

3.3.4. The unit shall have a speed of 100 Mbps.

3.4. PSA-CWGE26FX2TX24MSPoE+, Ethernet Switch Qty. 3 - Brand name or equivalent

3.4.1. The unit shall have 22 1Gb Base-T Ethernet ports.

PAGE 15 OF 58 1305M223QNWWG0217

3.4.2. The unit shall have 2 1Gb FX SFP ports.

3.4.3. The unit shall have 2 1Gb PoE+.

3.4.4. The unit shall have 1 RS-232 DB9 Console port.

3.4.5. The unit shall use the standard 110VAC for input power.

3.4.6. The unit shall have a switching bandwidth of at least 54Gbps.

3.4.7. The unit shall have a switching latency of no more than 7 micro seconds.

3.4.8. The contractor shall provide the rack to mount the switch. The rack shall be capable of holding the unit, wall mountable, lockable, with dual fans.

3.5. PSA-CNGE24FX12TX12MSPOE, Ethernet Switch, Qty. 1 Brand name or equivalent

3.5.1. The unit shall have 12 1Gb Base-T Ethernet ports.

3.5.2. The unit shall have 12 1Gb FX SFP ports.

3.5.3. The unit shall have 1 USB type B connector Console port.

3.5.4. The unit shall use the standard 110VAC for input power.

3.5.5. The unit shall have a switching bandwidth of at least 54Gbps.

3.5.6. The unit shall have a switching latency of no more than 7 micro seconds.

3.5.7. The contractor shall provide the rack to mount the switch. The rack shall be capable of holding the unit, wall mountable, lockable, with dual fans.

3.6. PSA-CNGE2FE4SMSPoEHO, Ethernet Switch Qty. 2 Brand name or equivalent

3.6.1. The unit shall be a self-managed LAN switch.

3.6.2. The unit shall have 2 x 1GB port that are PoE+ at 60W.

3.6.3. The unit shall have 2 x 1GB port that are PoE+ at 30W.

3.6.4. The unit shall have 2 x 1GB SFP ports.

3.6.5. The unit shall use the standard 110VAC for input power.

3.6.6. The unit shall have a wall mount capability.

3.7. PSA-CNGE5MS, Managed Switch Qty. 1

3.7.1. The unit shall be a self-managed LAN switch.

3.7.2. The unit shall have 3 x 1Gb Port with Auto MDI/MDIX.

3.7.3. The unit shall have 2 x 1 Gb SFP ports.

3.7.4. The unit shall use the standard 110VAC for input power.

3.8. PSA-CMP-00523GS6-6U-01 or industry standard, CAT6 Cable, White, Plenum, 1000 feet, Qty. 9

3.9. PETRA-241365 or industry standard, CAT6 Patch Cable, 25 feet, Qty. 6

3.10. PETRA-241376 or industry standard, CAT6 3 foot, Patch Cable, Qty. 20

3.11. PETRA-RJ45 or industry standard, RJ45 Modular Plug, Qty. 120

PAGE 16 OF 58 1305M223QNWWG0217

4. Scope:

4.1.1. This Statement of Work (SOW) defines the effort required for the contractor to update, replace, install, configure, and test a NDAA-compliant video surveillance system and facility access card readers at the Radar Operations Center.

4.1.2. The installed facility access card reader software shall be compatible with the video surveillance system for the monitoring of alarms from the security desk in the lobby of Bldg. 375. The Bldg. 375 lobby is the main hub for all surveillance. The facility card reader software shall be capable of being monitored, programmed, and controlled from the main hub computer.

4.1.3. This is a standalone system, it shall not be connected to our Local Area Network (LAN). The system shall be able to stand on its own and function with its own capabilities unassisted by the LAN or local information technology (IT) staff.

The system shall not have access to the Internet.

4.1.4. Contractor shall be responsible for configuring the software, workstation, and server to the security standards and protocols as specified by the manufacturer and license.

4.1.5. The contractor shall ensure full system configuration and operability before work is considered completed. A system demonstration and test shall be conducted with the COR to confirm the system conforms to the SOW and all settings, features, and components are functional.

4.1.6. The contractor shall provide initial training to the COR after installation of the video surveillance equipment and facility access card readers on the basic use of both systems and how the record functionality works on the video surveillance system.

4.1.7. The contractor shall uninstall and dispose of existing equipment currently installed to include but not limited to the system recording devices, receiver box, Ethernet switches, cameras, camera weather protectant housing units and mounts, monitors, controls, interfaces, cables, and plugs.

4.1.8. The contractor shall provide all replacement equipment and any new equipment needed to support the new system if not previously installed. Server and equipment racks and mounts, parts, components, and material shall be new except for the existing fiber cabling unless replacement is required for functionality of the system.

4.1.9. Cable management straps, mounting fasteners, mounting hardware, or equivalent shall be used to organize all installed cable with particular emphasis on the cabling under the main security desk counter located in Bldg. 375. Cabling shall be organized for ease of maintenance and repair. Cables shall also be labeled and properly color coded for the system maintenance contractor to be able to identify system wiring.

4.1.10. This scope is intended as a guide for the contractor to understand the overall need and basic design requested, the contractor will need to determine the specific need to be in compliance with industry-specific and local codes for installation.

PAGE 17 OF 58 1305M223QNWWG0217

4.1.11. Contractor shall ensure that all gaps and holes from the removal of the old video surveillance system and card readers, and installation of the new system and card readers are sealed and covered to prevent exposure to the elements and tampering.

4.1.12. All outside wiring shall be placed in metal or other weather-protectant conduit capable of withstanding exposure to the elements and all cameras with a protective done should be replaced with weather-resistant domes and hardware suitable for outdoor installation.

4.1.13. The contractor shall provide all needed lifts, ladders, and equipment needed to remove and replace the video surveillance system and facility access card readers.

4.1.14. Orientation of the camera views shall be done in consultation with the COR to ensure proper surveillance viewing coverage and placement.

4.1.15. The replacement cameras shall be at least 4mp resolution network IP style cameras. A higher digital resolution camera is acceptable if compatible.

4.1.16. The existing system utilizes coaxial video cables, these cables shall be replaced with CAT6 plenum, rated data cable or equivalent.

4.1.17. The existing system monitors shall be replaced with HDMI monitors that shall be 19”minimum size and a minimum 43” units at the main security desk in Bldg. 375.

4.1.18. The existing monitoring and control stations shall be transitioned to network client workstations.

4.1.19. The existing monitoring only stations shall be transitioned to video decoders.

4.1.20. The existing analog video recorders shall be transitioned to a network digital video server/recorder.

4.1.21. The existing fiber optic transmission units shall be changed from analog video to

Ethernet data transceivers.

4.1.22. Contractor shall provide a 1 year warranty on all equipment, parts, and installation upon job acceptable by the Government. If any issues arise during this timeframe, the contractor will be required to replace, fix, and/or correct the issue.

4.1.23. Contractor shall provide the original or a copy of all warranties, user guides, as built drawings, and installation manuals to the COR.

4.1.24. The contractor shall maintain/clean their work area each day.

4.1.25. The contractor shall provide spare equipment as follows for storage as a back-up:

4.1.26. One of each type of Avigilon or equivalent camera (bullet, dome, ptz) and its weather protective housing (if applicable).

Addendum 52.212-1

PAGE 18 OF 58 1305M223QNWWG0217

ADDENDUM TO FAR 52.212-1 INSTRUCTION TO OFFERORS – COMMERCIAL ITEMS

(MAR 2023)

The quoter MUST submit all of the following information with their quote package.

1. Page 1 of this solicitation document: complete blocks 17a, 30a, 30b, and 30c.

2. The “Pricing Schedule” is listed on page 3 of this solicitation document and is to be utilized for your quoted pricing.

3. Offeror Representations and Certifications (complete Federal Acquisition Regulation (FAR) provision 52.212-3, or certify completion in the System for Award Management (SAM) at the following website: https://www.sam.gov/home. Eastern Acquisition Division requires that all contractors doing business with the Federal Government be registered in SAM and have a Unique Entity Identifier (UEI) in order to be considered eligible for an award from this office. To learn more, please visit: https://SAM.gov/content/entity-registration. Note: registration is 100% free of charge.

4. Include your UEI number and your associated Commercial and Government Entity (CAGE) Code.

5. Your response to Commercial Acquisition Regulation (CAR) 1352.209-72, Restrictions Against Disclosure.

6. Your response to CAR 1352.209-74 (c), Organizational Conflict of Interest – Warrant and Disclosures.

7. Note the evaluation factors for the Technical Approach, Past Performance, and Price under

ADDENDUM TO FAR 52.212-2 EVALUATION – COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (NOV 2021).

Addendum 52.212-2

PAGE 19 OF 58 1305M223QNWWG0217

ADDENDUM TO FAR 52.212-2 EVALUATION – COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (NOV 2021).

(a) The Government intends to make an award(s) to the responsive, responsible quoter(s) providing the best value to the Government, price and non-price factors considered. The Government intends to select a “best value” submission utilizing a tradeoff considering non-price factors to be significantly more important than price. The Government will not make an award at a significantly higher overall price to achieve only slightly superior performance capability. As non-price factors approach equality, price, as an evaluation factor, becomes increasingly more important.

The evaluation factors that establish the requirements of acceptability are set forth as follows:

Factor 1 – Technical Approach

Offeror shall provide sufficient detailed information that demonstrates their technical approach to meet the requirements in the Statement of Objectives (SOO). Information will include the offeror’s installation schedule, brand & specifications of recommended equipment, preventative maintenance schedule, and off-site monitoring capabilities.

Factor 2 – Past Performance

To be considered technically acceptable, the offeror shall demonstrate relevant past performance or affirmatively state that it possesses no relevant past performance. Relevant past performance is performance under contracts or efforts, within the past 3 years from the date of this solicitation that is of the same or similar scope, magnitude, and complexity to which is described in the SOO.

The offeror shall provide a list of NO MORE than three (3) current/previous contract performance references that includes: contract number, points of contact with valid telephone numbers and email addresses, periods of performance, role on the contract (prime or subcontractor), and other relevant information.

Evaluation of past performance shall be based on the reference provided, the offeror’s recent and relevant procurement history with the National Oceanic and Atmospheric Administration (NOAA), its affiliates, and other Government agencies, and/or any other source of information available to the Government. A Past Performance Questionnaire may be sent by the Government, at its sole discretion, to the past performance references if deemed necessary. Data from the Contractor Performance Assessment Reporting System (CPARS), and/or any other available source of information, may be used at the Government’s discretion to supplement the references provided.

Past performance of a similar scope, magnitude, and complexity that demonstrates a minimum finding of satisfactory or higher by all considered sources, or past performance to be found neutral, will be found technically acceptable.

PAGE 20 OF 58 1305M223QNWWG0217

In the case of an offeror without a record of relevant past performance or for whom information on past performance is not available, the offeror will receive a neutral past performance rating.

Factor 3 – Price

The offeror shall use the Pricing Schedule on page 3 to quote all pricing. The offeror shall quote all-inclusive firm-fixed pricing including, but not limited to, profit, overhead, General & Administrative, shipping, and travel costs, without exception, to perform the work specified in the

SOO.

WAGE DETERMINATION 2015-5315, REVISION 21

PAGE 21 OF 58 1305M223QNWWG0217

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5315 Daniel W. Simms Division of | Revision No.: 21 Director Wage Determinations| Date Of Last Revision: 08/03/2023

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |Executive Order 14026 generally applies to | |after January 30, 2022, or the |the contract. | |contract is renewed or extended (e.g., |The contractor must pay all covered workers | |an option is exercised) on or after |at least $16.20 per hour (or the applicable | |January 30, 2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2023. | |If the contract was awarded on or |Executive Order 13658 generally applies to | |between January 1, 2015 and January 29,|the contract. | |2022, and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30, |at least $12.15 per hour (or the applicable | |2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2023. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

State: Oklahoma

Area: Oklahoma Counties of Canadian, Cleveland, Grady, Lincoln, Logan, McClain, Oklahoma

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 16.50 01012 - Accounting Clerk II 18.54 01013 - Accounting Clerk III 20.73 01020 - Administrative Assistant 24.84 01035 - Court Reporter 20.31 01041 - Customer Service Representative I 14.11*** 01042 - Customer Service Representative II 15.39*** 01043 - Customer Service Representative III 17.29 01051 - Data Entry Operator I 15.53*** 01052 - Data Entry Operator II 16.94 01060 - Dispatcher, Motor Vehicle 23.11 01070 - Document Preparation Clerk 14.26*** 01090 - Duplicating Machine Operator 14.26*** 01111 - General Clerk I 14.35*** 01112 - General Clerk II 15.66***

PAGE 22 OF 58 1305M223QNWWG0217

01113 - General Clerk III 18.00 01120 - Housing Referral Assistant 21.99 01141 - Messenger Courier 16.42 01191 - Order Clerk I 17.52 01192 - Order Clerk II 19.12 01261 - Personnel Assistant (Employment) I 18.10 01262 - Personnel Assistant (Employment) II 20.25 01263 - Personnel Assistant (Employment) III 22.57 01270 - Production Control Clerk 24.35 01290 - Rental Clerk 14.04*** 01300 - Scheduler, Maintenance 17.64 01311 - Secretary I 17.64 01312 - Secretary II 19.73 01313 - Secretary III 21.99 01320 - Service Order Dispatcher 20.67 01410 - Supply Technician 24.84 01420 - Survey Worker 17.07 01460 - Switchboard Operator/Receptionist 14.31*** 01531 - Travel Clerk I 17.05 01532 - Travel Clerk II 18.16 01533 - Travel Clerk III 18.97 01611 - Word Processor I 15.71*** 01612 - Word Processor II 17.64 01613 - Word Processor III 19.73 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 22.11 05010 - Automotive Electrician 22.11 05040 - Automotive Glass Installer 21.00 05070 - Automotive Worker 21.00 05110 - Mobile Equipment Servicer 18.85 05130 - Motor Equipment Metal Mechanic 23.17 05160 - Motor Equipment Metal Worker 21.00 05190 - Motor Vehicle Mechanic 23.17 05220 - Motor Vehicle Mechanic Helper 17.73 05250 - Motor Vehicle Upholstery Worker 20.01 05280 - Motor Vehicle Wrecker 21.00 05310 - Painter, Automotive 22.11 05340 - Radiator Repair Specialist 21.00 05370 - Tire Repairer 16.13*** 05400 - Transmission Repair Specialist 23.17 07000 - Food Preparation And Service Occupations 07010 - Baker 13.95*** 07041 - Cook I 13.07*** 07042 - Cook II 14.55*** 07070 - Dishwasher 11.34*** 07130 - Food Service Worker 11.74*** 07210 - Meat Cutter 17.13 07260 - Waiter/Waitress 10.09*** 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 18.09 09040 - Furniture Handler 12.55*** 09080 - Furniture Refinisher 17.50 09090 - Furniture Refinisher Helper 14.04*** 09110 - Furniture Repairer, Minor 15.84*** 09130 - Upholsterer 16.16*** 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 13.76*** 11060 - Elevator Operator 13.76*** 11090 - Gardener 18.40 11122 - Housekeeping Aide 12.76*** 11150 - Janitor 12.76*** 11210 - Laborer, Grounds Maintenance 15.47*** 11240 - Maid or Houseman 11.21*** 11260 - Pruner 14.59*** 11270 - Tractor Operator 17.30

PAGE 23 OF 58 1305M223QNWWG0217

11330 - Trail Maintenance Worker 15.47*** 11360 - Window Cleaner 13.54*** 12000 - Health Occupations 12010 - Ambulance Driver 19.13 12011 - Breath Alcohol Technician 20.92 12012 - Certified Occupational Therapist Assistant 29.86 12015 - Certified Physical Therapist Assistant 28.70 12020 - Dental Assistant 20.47 12025 - Dental Hygienist 41.84 12030 - EKG Technician 23.05 12035 - Electroneurodiagnostic Technologist 23.05 12040 - Emergency Medical Technician 19.13 12071 - Licensed Practical Nurse I 18.70 12072 - Licensed Practical Nurse II 20.92 12073 - Licensed Practical Nurse III 23.32 12100 - Medical Assistant 16.78 12130 - Medical Laboratory Technician 23.84 12160 - Medical Record Clerk 20.47 12190 - Medical Record Technician 22.89 12195 - Medical Transcriptionist 20.96 12210 - Nuclear Medicine Technologist 37.93 12221 - Nursing Assistant I 12.14*** 12222 - Nursing Assistant II 13.65*** 12223 - Nursing Assistant III 14.89*** 12224 - Nursing Assistant IV 16.72 12235 - Optical Dispenser 16.72 12236 - Optical Technician 17.58 12250 - Pharmacy Technician 17.47 12280 - Phlebotomist 17.58 12305 - Radiologic Technologist 31.69 12311 - Registered Nurse I 27.48 12312 - Registered Nurse II 31.11 12313 - Registered Nurse II, Specialist 31.11 12314 - Registered Nurse III 37.64 12315 - Registered Nurse…