Granite Reef Improvements Final.pdf
PDF 5 MB Posted
- Solicitation number
- 127EAX25R0001
About this file
These are design and construction drawings for the Granite Reef Recreation Area site improvements project in the Tonto National Forest, Mesa Ranger District, Arizona. The 14-sheet drawing set details comprehensive site renovation including demolition of existing infrastructure, construction of new parking areas, accessible pathways, picnic areas, vault toilets, and associated site amenities. Specific improvements include:
Key project elements encompass constructing approximately 120 passenger vehicle parking spaces with curb and gutter, installing 8 single-family accessible picnic units with concrete pads and grills, creating concrete pathways conforming to accessibility requirements, adding three dumpsters, two pre-cast concrete vault toilet buildings, an information kiosk, and relocating existing site features. The project involves removing existing pavement, drives, and some vegetation, with careful coordination required with the Contracting Officer's Representative regarding tree removal. Construction details specify 3" asphalt on 6" aggregate base course, concrete sidewalks, accessible ramps, gate installations, and specific site grading and drainage specifications.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Granite Reef QAs.docx | DOCX document | |
| 127EAX25R0001 Amendment 0002.pdf | ||
| Updated CAD.pdf | ||
| 127EAX25R0001 Amendment.pdf | ||
| 127EAX25R0001.pdf | ||
| Granite Reef Improvements Specifications.pdf | ||
| Updated Presolicitation Notice.pdf | ||
| Presolicitation Notice.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
United States Department of Agriculture Forest Service
GRANITE REEF RECREATION AREA
FROM THE TONTO SUPERVISORS OFFICE, TRAVEL EAST ON HIGHWAY 202. EXIT ONTO POWER ROAD.
TURN LEFT ON POWER ROAD. TRAVEL FOR 2.7 MILES UNTIL YOU REACH THE PROJECT AND TURN
LEFT INTO THE SITE..
SITE IMPROVEMENTS
RECOMMENDED BY:
APPROVED:
FOREST ENGINEER
DISTRICT RANGER DATE
DATE
FOREST SUPERVISOR DATE
DEPUTY DIRECTOR OF RECREATION DATE
8/6 /24
:4
9 L
RO
LL
IN
S C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M-
W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
C
OV
ER
C -0
1.D W
G;
ARIZONA
MARICOPA COUNTY
(R03) SOUTHWESTERN REGION
TONTO NATIONAL FOREST
MESA RANGER DISTRICT
INDEX OF SHEETS
SHEET SHEET TITLE DATE
C-01 COVER SHEET 06/26/24
C-02 GENERAL NOTES 06/26/24
C-03 DEMOLITION PLAN 06/26/24
C-04 DEMOLITION PLAN 06/26/24
C-05 SITE PLAN 06/26/24
C-06 SITE IMPROVEMENT PLAN 06/26/24
C-07 SITE IMPROVEMENT PLAN 06/26/24
C-08 SIGNING & STRIPING PLAN 06/26/24
C-09 SIGNING AND STRIPING PLAN 06/26/24
C-10 TOILET DETAILS 06/26/24
C-11 GATE DETAILS 06/26/24
C-12 SITEWORK DETAILS 06/26/24
C-13 SITEWORK DETAILS 06/26/24
C-14 SIGNING & STRIPING DETAILS 06/26/24
PROJECT LOCATION MAP
VICINITY MAP
TRAVEL DIRECTIONS:
SHEET OF
TONTO SUPERVISORS OFFICE:
2324 E MCDOWELL ROAD
PHOENIX, AZ 85006
DIRECTOR OF ENGINEERING
AND RECREATION
DATE
DRAWN
DESIGNER
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
GENERAL NOTES
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-02 2 14
GENERAL NOTES (CONT'D) GENERAL NOTES (CONT'D)GENERAL NOTES (CONT'D) GENERAL NOTES (CONT'D)
G1. DEFINITIONS
THE "CONTRACTING OFFICER" AS
REFERENCED HERIN REFERS TO THE
GOVERNMENT CONTRACTING OFFICER
OVERSEEING THE CONTRACT. THE
"CONTRACTOR" AS REFERENCED HEREIN
REFERS TO THE COMPANY OR PERSON
PERFORMING THE INSTRUCTED WORK.
G2. SCOPE
THE NOTES ON THIS SHEET AND THE
STANDARD DETAILS ARE GENERAL AND
APPLY TO THE ENTIRE PROJECT WHETHER
SPECIFICALLY CALLED OUT OR NOT, EXCEPT
WHERE THERE ARE SPECIFIC INDICATIONS
TO THE CONTRARY ON THE DRAWING
SHEETS. IF THERE ARE QUESTIONS, THEY
SHALL BE SUBMITTED TO THE CONTRACTING
OFFICER AND ANSWERED IN WRITING PRIOR
TO CONSTRUCTION.
G3. STANDARD DETAILS
THE STANDARD DETAILS DEPICT TYPICAL
DETAILING TO BE USED ON THIS PROJECT. IF
CONDITIONS ARE NOT EXPLICITLY SHOWN ON
THE DRAWINGS THEY SHALL BE MADE
SIMILAR TO THE STANDARD DETAILS. OBTAIN
APPROVAL OF CONTRACTING OFFICER IN
WRITING FOR SIMILAR CONDITIONS PRIOR TO
CONSTRUCTION.
G4. APPLICABLE SPECIFICATIONS AND CODES
CONSTRUCTION SHALL BE PER THE LATEST
VERSION OF THE APPLICABLE ENERGY,
ELECTRICAL, PLUMBING, MECHANICAL, AND
BUILDING CODES, OR THE CONSTRUCTION
PLANS, WHICHEVER IS MORE STRINGENT.
G5. COMPLETE & OPERABLE SYTEMS
FURNSH AND INSTALL COMPLETE AND
OPERABLE SYSTEMS AND FEATURES OF
WORK. IF THERE IS AN OMISSION ON THE
PLANS, SUCH OMISSION SHALL NOT BE
CONSTRUED TO MEAN THAT THE
CONTRACTOR IS NOT REQUIRED TO FURNISH
OR PROVIDE ALL THAT IS NECESSARY FOR
COMPLETE AND OPERABLE SYSTEMS AND
FEATURES OF WORK.
G6. ANY CHANGES TO THE DESIGN AS SHOWN
MUST BE REVIEWED AND APPROVED BY THE
CONTRACTING OFFICER BEFORE CHANGES
ARE MADE. THIS INCLUDES CHANGES
REQUESTED BY THE CONTRACTOR AND
SUBCONTRACTORS.
G7. THE CONTRACTOR SHALL CONTACT THE
APPROPRIATE BLUE STAKE TO MARK AND
IDENTIFY UNDERGROUND UTILITIES PRIOR TO
EXCAVATION.
G8. THE CONTRACTOR SHALL FIELD VERIFY ALL
DIMENSIONS AND ELEVATIONS OF EXISTING
CONSTRUCTION AS REQUIRED TO
COORDINATE NEW CONSTRUCTION. SUBMIT
REQUIRED CHANGES FOR APPROVAL.
G9. CONTRACTORS WORKING WITHIN THE
PROJECT BOUNDARIES ARE RESPONSIBLE
FOR COMPLIANCE WITH ALL JURISDICTIONAL
SAFETY LAWS AND REGULATIONS.
G10. THE CONTRACTOR SHALL OBTAIN ANY
NECESSARY PERMITS AND ASSOCIATED
FEES, AS REQUIRED, TO PERFORM THE
WORK.
G11. CONTRACTOR SHALL PROVIDE ADEQUATE
SIGNING, BARRICADES, FLAGGING, ETC. AND
TAKE NECESSARY SAFETY MEASURES TO
PROTECT THE PUBLIC DURING
CONSTRUCTION, PER MUTCD AND OSHA.
G12: CONTRACTOR EQUIPMENT
EQUIPMENT SHALL BE OF THE APPROPRIATE
SIZE, TYPE, AND MODEL, AND IN GOOD
WORKING CONDITION, SUITABLE FOR THE
WORK REQUIRED. OPERATORS SHALL BE
COMPETENT, EXPERIENCED, AND CERTIFIED
IN THE OPERATION OF EQUIPMENT.
EQUIPMENT SHALL HAVE SAFETY SIGNING
AND APPURTENANCES REQUIRED BY OSHA,
SUCH AS ROLLOVER PROTECTION (ROPS),
FIRE SUPPRESSION DEVICES, LIGHTS, AND
SLOW MOVING VEHICLE SIGNS. GRADING
EQUIPMENT MUST BY CAPABLE OF CUTTING,
CROWNING, AND SHAPING MATERIAL TO
PERFORM THE TASKS OUTLINED IN THE
PROJECT. EQUIPMENT SHALL BE MADE
AVAILABLE FOR INSPECTION PRIOR TO
NOTICE TO PROCEED. IF, AT ANY TIME
DURING THE CONTRACT, THE EQUIPMENT IS
DEEMED UNSATISFACTORY OR UNSAFE, THE
CONTRACTING OFFICER MAY REQUIRE
REMOVAL AND REPLACEMENT AT NO
EXPENSE TO THE GOVERNMENT. ANY
MOVEMENT OR TRANSPORTATION OF
EQUIPMENT TO OR FROM WORK AREAS, TO
REPAIR OR REPLACE EQUIPMENT, OR FOR
THE CONTRACTOR'S CONVENIENCE, SHALL
BE AT THE CONTRACTOR'S EXPENSE.
PRIOR TO ENTERING FOREST LANDS, ENSURE
EQUIPMENT IS WASHED, CLEANED, AND
INSPECTED FOR NOXIOUS WEEDS, SOIL,
VEGETATIVE MATTER, AND OTHER DEBRIS.
PARTICULARLY THE EQUIPMENT
UNDERCARRIAGE.
G13. ARCHEOLOGICAL DISCOVERY
IN THE EVENT OF INADVERTENT DISCOVERY
OF POSSIBLE ARCHEOLOGICAL RESOURCES,
STOP WORK IN THE IMMEDIATE VICINITY AND
CONTACT THE CONTRACTING OFFICER.
SECURE THE AREA AND RELOCATE WORK TO
ANOTHER ARE OF THE PROJECT.
G14. ONSITE UTILITIES
THERE IS NO WATER, ELECTRICAL, OR
SANITARY FACILITIES AVAILABLE FOR
CONTRACTOR USE AT THE PROJECT SITE.
G15. PRESERVATION OF NATURAL FEATURES
A. PREVENT DAMAGE TO NATURAL
SURROUNDINGS. RESTORE DAMAGED AREAS,
REPAIRING OR REPLACING DAMAGED TREES
AND PLANTS, AT NO COST TO THE
GOVERNMENT.
B. DO NOT REMOVE, INJURE, OR DESTROY
TREES OR OTHER PLANTS WITHOUT PRIOR
APPROVAL, OR AS INDICATED IN THE
CONTRACT.
C. SUPERVISE EXCAVATING, GRADING,
BACKFILLING, AND OTHER OPERATIONS NEAR
TREES TO PREVENT DAMAGE.
D. INTEGRATE TREE PROTECTION MEASURES
AS DETAIL ON SHEET C-10 / 2 FOR TREES
DIRECTLY ADJACENT TO, OR IN THE
IMMEDIATE VICINITY OF, CLEARING,
GRUBBING, AND EXCAVATION ACTIVITIES.
G16. CONTRACTOR USE OF PREMISES
LIMIT USE OF PREMISES TO WORK WITHIN
THE CONSTRUCTION LIMITS. DO NOT DISTURB
PORTIONS OF THE SITE BEYOND WHERE
CONSTRUCTION LIMITS ARE INDICATED.
G17. WORK SCHEDULING
NORMAL WORKING HOURS FOR
CONSTRUCTION ARE 0700 TO 1800, MONDAY
THROUGH SUNDAY. REQUESTS FOR
ADDITIONAL HOURS REQUIRES WRITTEN
APPROVAL BY THE C.O. WITH SEVEN (7) DAYS
ADVANCED NOTICE.
X1. WHEN THE TERMS "REMOVE", "DISPOSE",
"DEMOLISH", OR "DEMO" ARE USED, DISPOSE
LEGAL OFFSITE IN ACCORDANCE WITH
APPLICABLE LOCAL, COUNTY, STATE, AND
FEDERAL JURISDICTIONS. ANY SALVAGE
VALUE AS A RESULT OF THE WORK SHALL BE
INCLUDED IN THE INITIAL BIDDING
DOCUMENT.
GENERAL NOTES LINE SYMBOLOGY
CONSTRUCTION LIMITS
CENTERLINE / COLUMN GRID
EXISTING FENCE / BARRIER
PROPOSED FENCE / BARRIER
EXISTING - MAJOR CONTOUR
EXISTING - MINOR CONTOUR
EXISTING HIGHWATER
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text E
X
X
X
X
X
X
X
X
X
X
X
X
XX
X
X X
X X
SALT RIVER
BUSH H
IG
HW
AY
EXISTING FENCE TO REMAIN
EXISTING FENCE TO REMAIN
EXISTING FENCE TO REMAIN
END PAVEMENT
AND CURB
REMOVAL
EXISTING DIRT ROAD
EXISTING DIRT ROAD
DRAWN
DESIGNER
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
DEMOLITION
PLAN
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-03 3 14
Feet
20100
1. REMOVE ALL EXISTING PAVEMENT AND
CURBING AND DISPOSE OF OFF FOREST
LANDS.LIMITS OF REMOVAL AS SHOWN.
2. REMOVE ALL EXISTING SIDEWALKS AND
DISPOSE OF OFF FOREST LANDS.
3. REMOVE EXISTING TREES AS MARKED.
REMOVAL INCLUDES THE ROOTS. ALL
TREES WITH THIS NOTE TO BE
REMOVED. TREES TO BE REMOVED WILL
BE FLAGGED BY COR. TREES WITHOUT A
NOTE ARE TO REMAIN IN PLACE.
DISPOSE OF OFF FOREST LANDS.
4. EXISTING CONCRETE PICNIC TABLE TO
BE RELOCATED. REFER TO SITE PLAN
FOR NEW LOCATION. CONCRETE UNDER
TABLE TO BE REMOVED AND DISPOSED
OF OFF FOREST LANDS.
5. CONTRACTOR TO MOVE EXISTING VAULT
TOILET AND TWO EXISTING VAULTS TO
STAGING FOR REINSTALLATION. HOLE
TO BE BACKFILLED AND COMPACTED TO
MEET FP-14 AND FSSS.
DEMOLITION NOTES
MATCH SHEET 04
20 SCALE
0 10' 20'
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
X
X
X
X
X
X
X
X
X
SALT RIVER
BUSH HIG
HWAY
EXISTING FENCE TO REMAIN
END PAVEMENT
AND CURB
REMOVAL
DRAWN
DESIGNER
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
DEMOLITION PLAN
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-04 4 14
MATCH SHEET 03
1. REMOVE ALL EXISTING PAVEMENT AND
CURBING AND DISPOSE OF OFF FOREST
LANDS.LIMITS OF REMOVAL AS SHOWN.
2. REMOVE ALL EXISTING SIDEWALKS AND
DISPOSE OF OFF FOREST LANDS.
3. REMOVE EXISTING TREES AS MARKED.
REMOVAL INCLUDES THE ROOTS. ALL
TREES WITH THIS NOTE TO BE
REMOVED.TREES TO BE REMOVED WILL
BE FLAGGED BY COR. TREES WITHOUT A
NOTE ARE TO REMAIN IN PLACE.
DISPOSE OF OFF FOREST LANDS..
4. EXISTING CONCRETE PICNIC TABLE TO
BE RELOCATED. REFER TO SITE PLAN
FOR NEW LOCATION. CONCRETE UNDER
TABLE TO BE REMOVED AND DISPOSED
OF OFF FOREST LANDS.
DEMOLITION NOTES
20 SCALE
0 10' 20'
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
X
X
X
X
X
X
X
X
X
X
X
X X
X X
X
24 SPACES
DBL VAULT TOILET
DBL VAULT TOILET
DBL VAULT TOILET
CABLED CONCRETE MAT
CABLED CONCRETE
KIOSK
MARICOPA TRAIL
DUMPSTER
DUMPSTER
BUSH H
IG
HW
AY
SALT RIVER
EXISTING BUILDING
RELOCATED
16 SPACES - 1
ACCESSIBLE
20 SPACES
19 SPACES
17 SPACES - 2
ACCESSIBLE (1 VAN)
6 SPACES
1 ACCESSIBLE
4 SPACES
1 ACCESSIBLE
PICNIC TABLE (TYP)
EXISTING ROW FENCE
TO REMAIN
PERMITEE ACCESS POINT
PUBLIC USE
MAT
GABION WALL TO DIVERT
OFFSITE FLOWS TO THE WEST
EXISTING FENCE
TO REMAIN
SINGLE GATE TO ALLOW
THIS PART TO BE CLOSED
IN EMERGENCY SITUATIONS
EXISTING 100-YEAR FLOOD PLAIN
EXISTING GUARDRAIL
TO REMAIN
EXISTING GUARDRAIL
TO REMAIN
KIOSK
AND PAD
CABLED CONCRETE
PUBLIC USE
MAT
SINGLE GATE TO ALLOW
THIS PART TO BE CLOSED
IN EMERGENCY SITUATIONS
NO
P
AR
KI
NG
NO PARKING
DUMPSTER
SINGLE GATE TO ALLOW
THIS RAMP TO BE CLOSED
FOR USE BY PERMITTEES
BUILDING #1
BUILDING #2
BUILDING #3
EXISTING 100-YEAR
FLOODPLAIN
DRAWN
DESIGNER
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
SITE PLAN
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-05 5 14
30 SCALE
0 15' 30'
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
X
X
X
X
X
X
X
X
X
X
X
XX
X
X X
X X
BUSH H
IG
HW
AY
SALT RIVER
EXISTING ROW FENCE
TO REMAIN
EXISTING FENCE TO REMAIN
EXISTING FENCE TO REMAIN
100-YEAR FLOOD
PLAIN LINE
C=20.00
C=21.08
C=22.04
C=21.11
C=21.53
C=21.72
C=22.11
P=21.73
P=21.96
C=21.97 C=22.01
C=22.31
P=21.33
P=21.18 C=21.18
C=21.56 C=21.32
C=21.22
C=20.83
C=21.48
P=21.96
C=22.35
C=28.37
C=26.52
C=29.01
C=26.73
C=24.52C=24.73
15%
8.9%
8.9%
C=22.55
C=22.55
C=22.14
C=21.94
C=21.76
C=21.76
C=21.94
C=20.74
C=20.55C=21.14
C=20.21
C=20.50
C=19.48 C=19.90
FF=22.61
FF=22.90
C=22.35
C=21.76
C=21.97 C=22.12
C=21.93
C=22.11C=20.22
C=20.66
C=20.90
C=22.26
C=22.42
C=22.26
C=19.48
P=18.60
C=20.50
P=18.92
C=19.34
C=19.97
C=19.67
C=19.37
P=19.50
P=17.82
P=17.60
C=20.42
C=20.60
P=20.92
P=21.56
NO
P
AR
KI
NG
NO PARKING
C=22.35
C=19.00
C=22.46
11 11
18 20' O.C.
18 END
18 START
18 END
18 20' O.C
18 START
18 19
TYP
TYP
C=21.445
FF=21.70
BM TOP OF
CULVERT
1330.52
DRAWN
DESIGNER
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
SITE IMPROVEMENTS
PLAN
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-06 6 14
Feet
20100
MATCH SHEET 07
20 SCALE
0 10' 20'
1. CONSTRUCT 3" ASPHALT ON 6" ABC PER FP-14 AND
SUPPLEMENTAL SPECIFICATIONS.
2. CONSTRUCT 6" CURB & GUTTER, CATCH. SEE DETAIL ON
SHEET 12.
3. CONSTRUCT 6" CURB & GUTTER, RELEASE. SEE DETAIL
ON SHEET 12.
4. CONSTRUCT 2' VALLEY GUTTER. SEE DETAIL ON SHEET
12.
5. CONSTRUCT 5' CONCRETE SIDEWALK ADJACENT TO
CURBING. REFER TO DETAIL ON SHEET 13.
6. CONSTRUCT 8' CONCRETE SIDEWALK ADJACENT TO
CURBING. REFER TO DETAIL ON SHEET 13.
7. CONSTRUCT FREESTANDING CONCRETE SIDEWALK.
REFER TO DETAIL ON SHEET 13.
8. INSTALL ACCESSIBLE RAMP TYPE 1. SEE DETAIL ON
SHEET 12.
9. INSTALL ACCESSIBLE RAMP TYPE 2. SEE DETAIL ON
SHEET 12.
10. INSTALL ACCESSIBLE RAMP TYPE 3. SEE DETAIL ON
SHEET 12.
11. CONSTRUCT CONCRETE PICNIC TABLE PAD FOR
RELOCATED PICNIC TABLE. SEE DETAIL ON SHEET 12.
12. INSTALL DOUBLE VAULT TOILET WITH CHASE. SEE
DETAILS ON SHEET 10.
13. CONSTRUCT GABION WALL AS SHOWN. SEE DETAILS ON
SHEET 13.
14. CONSTRUCT DUMPSTER PAD. SEE DETAILS ON SHEET
13.
15. INSTALL CONCRETE CABLE MAT RAMP. SEE DETAILS ON
SHEET 13.
16. RELOCATE EXISTING DOUBLE VAULT TOILET AT THE
LOCATION SHOWN. SEE DETAILS ON SHEET 10.
17. INSTALL SINGLE GATE. SEE DETAILS ON SHEET 11.
18. CONSTRUCT CURB OPENINGS AS SHOWN. SEE DETAIL
ON SHEET 12.
19. INSTALL WHEEL STOP. SEE DETAIL ON SHEET 12.
20. INSTALL THREE-PANEL KIOSK. SEE DETAIL PAGE 13.
21. RELOCATE EXISTING GRILL AS SHOWN. ADD 2 FOOT
CONCRETE SECTION DOWELED INTO EXISTING PAD. USE
THICKENED EDGE FOR NEW SECTION.
CONSTRUCTION NOTES
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
X
X
X
X
X
X
X
X
X
BUSH HIG
HWAY
SALT RIVER
EXISTING ROW FENCE
TO REMAIN
EXISTING GUARDRAIL
TO REMAIN
EXISTING 100-YEAR
FLOODPLAIN
LIMITS
C=20.00
C=21.08
P=21.73
C=21.97 C=22.01
P=21.33
P=21.18 C=21.18
C=21.56 C=21.32
C=21.22
C=20.83
C=20.66
C=22.00
C=22.38
C=22.08
C=21.48
P=22.17
P=21.96
C=22.35
C=24.59
C=25.02
C=22.93
C=23.42
C=24.36
C=22.90
C=23.14
C=23.34
C=24.18
C=20.42
C=20.60
P=20.92
P=21.563
18 END
C=21.44
18 START
18 20' O.C.
18 END
FF=21.70
DRAWN
DESIGNER
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
SITE IMPROVEMENTS
PLAN
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-07 7 14
MATCH SHEET 06
20 SCALE
0 10' 20'
1. CONSTRUCT 3" ASPHALT ON 6" ABC PER FP-14 AND
SUPPLEMENTAL SPECIFICATIONS.
2. CONSTRUCT 6" CURB & GUTTER, CATCH. SEE DETAIL ON
SHEET 12.
3. CONSTRUCT 6" CURB & GUTTER, RELEASE. SEE DETAIL
ON SHEET 12.
4. CONSTRUCT 2' VALLEY GUTTER. SEE DETAIL ON SHEET
12.
5. CONSTRUCT 5' CONCRETE SIDEWALK ADJACENT TO
CURBING. REFER TO DETAIL ON SHEET 13.
6. CONSTRUCT 8' CONCRETE SIDEWALK ADJACENT TO
CURBING. REFER TO DETAIL ON SHEET 13.
7. CONSTRUCT CONCRETE SIDEWALK. REFER TO DETAIL
ON SHEET 13.
8. INSTALL ACCESSIBLE RAMP TYPE 1. SEE DETAIL ON
SHEET 12.
9. INSTALL ACCESSIBLE RAMP TYPE 2. SEE DETAIL ON
SHEET 12.
10. INSTALL ACCESSIBLE RAMP TYPE 3. SEE DETAIL ON
SHEET 12.
11. CONSTRUCT CONCRETE PICNIC TABLE PAD FOR
RELOCATED PICNIC TABLE. SEE DETAIL ON SHEET 12.
12. INSTALL DOUBLE VAULT TOILET WITH CHASE. SEE
DETAILS ON SHEET 10.
13. CONSTRUCT GABION WALL AS SHOWN. SEE DETAILS ON
SHEET 13
14. CONSTRUCT DUMPSTER PAD. SEE DETAILS ON SHEET
13.
15. INSTALL CONCRETE CABLE MAT RAMP. SEE DETAILS ON
SHEET 13..
16. RELOCATE EXISTING DOUBLE VAULT TOILET AT THE
LOCATION SHOWN. SEE DETAILS ON SHEET 10.
17. INSTALL SINGLE GATE. SEE DETAILS ON SHEET 11.
18. CONSTRUCT CURB OPENINGS AS SHOWN. SEE DETAIL
ON SHEET 12.
19. INSTALL WHEEL STOP. SEE DETAIL ON SHEET 12.
20. INSTALL THREE-PANEL KIOSK. SEE DETAIL PAGE 13.
21. RELOCATE EXISTING GRILL AS SHOWN. ADD 2 FOOT
CONCRETE SECTION DOWELED INTO EXISTING PAD. USE
THICKENED EDGE FOR NEW SECTION.
CONSTRUCTION NOTES
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
X
X
X
X
X
X
X
X
X
X
X
XX
X
X X
X X
NO
P
AR
KI
NG
NO PARKING
1 2
26.75'
62'
18'
12.00'
5'
12'
62'
5.29'
40'
18'
13.61'
22'
DRAWN
DESIGNER
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
SIGNING AND STRIPING
PLAN
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-08 8 14
Feet
20100
20 SCALE
0 10' 20'
R7-01L 12"x18"
NO
PARKING
LOADING
ZONE
R7-01R 12"x18"
R7-06R 12"x18"
PARKING
NO
LOADING
ZONE
R7-06 12"x18"
NO
PARKING
LOADING
ZONE
R7-06L 12"x18"
R7-08
NO
ARROW
12"x18"
NO
PARKING
LOADING
ZONE
R7-06R 12"x18"
R7-06L 12"x18"
RESERVED
PARKING
RESERVED
PARKING
VAN
ACCESSIBLER3-06R
30"x36"
EAST
DO NOT
ENTER
R5-01 30"x30"
WEST
ONLY
DO NOT
ENTER
R5-01 30"x30"
EAST
R3-05A 30"x36"
EAST
DO NOT
ENTER
R5-01 30"x30"
NORTH
R3-06R 30"x36"
SOUTH
EXISTING
SITE
SIGN (TO
REMAIN
IN
PLACE)
FLOOD
HAZARD
WARNING
SIGN
GOV
FURNISHED
MATCH SHEET 09
NO
PARKING
ANY
TIME
NO
PARKING
ANY
TIME
R7-08
NO
ARROW
12"x18"
R7-08
NO
ARROW
12"x18"
NO
PARKING
LOADING
ZONE
RESERVED
PARKING
RESERVED
PARKING
R7-08
NO
ARROW
12"x18" R7-08P 12"x6"
NO
PARKING
ANY
TIME
R7-01 12"x18"
1. APPLY 4" RED CHEVRON STRIPES AND RED "NO
PARKING" LETTERING AS SHOWN. SEE SHEET 14 FOR
DETAIL ON CHEVRONS..
2. APPLY 4" YELLOW CHEVRON IN LOADING ZONES AS
SHOWN. SEE SHEET 14 FOR DETAIL ON CHEVRONS.
3. APPLY ARROWS AS SHOWN. SEE SHEET 14 FOR DETAILS
ON THE ARROWS .
4. APPLY ACCESSIBLE PARKING STRIPING AS SHOWN. SEE
SHEET 14 FOR DETAILS.
5. APPLY 4" WHITE STRIPING FOR PARKING SPACES.
6. APPLY 4" YELLOW CHEVRON IN CROSSWALKS AS
SHOWN. SEE SHEET 14 FOR DETAIL ON CHEVRONS.
CONSTRUCTION NOTES
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
X
X
X
X
X
X
X
X
X
40'
18'
DRAWN
DESIGNER
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
SIGNING AND STRIPING
PLAN
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-09 9 14
MATCH SHEET 08
20 SCALE
0 10' 20'
PARKING
NO
LOADING
ZONE
R7-06 12"x18"
NO
PARKING
LOADING
ZONE
R7-06L 12"x18"
NO
PARKING
LOADING
ZONE
R7-06R 12"x18"
RESERVED
PARKING
R7-08 12"x18"
1. APPLY RED CHEVRON STRIPES AND RED "NO PARKING"
LETTERING AS SHOWN. SEE SHEET 14 FOR DETAIL ON
CHEVRONS.
2. APPLY YELLOW CHEVRON IN LOADING ZONES AS
SHOWN. SEE SHEET 14 FOR DETAIL ON CHEVRONS.
3. APPLY ARROWS AS SHOWN. SEE SHEET 14 FOR DETAILS
ON THE ARROWS .
4. APPLY ACCESSIBLE PARKING STRIPING AS SHOWN. SEE
SHEET 14 FOR DETAILS.
5. APPLY 4" WIDE WHITE STRIPING FOR PARKING SPACES.
6. APPLY 4" YELLOW CHEVRON IN CROSSWALKS AS
SHOWN. SEE SHEET 14 FOR DETAIL ON CHEVRONS.
CONSTRUCTION NOTES
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
TOILET BUILIDNG
DETAILS AND SECTIONS
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-10 10 14
AutoCAD SHX Text
1% SLOPE
AutoCAD SHX Text
COMPACTED ABC
AutoCAD SHX Text
COMPACTED SUBGRADE
AutoCAD SHX Text
VENT PIPE
AutoCAD SHX Text
VENT PIPE
AutoCAD SHX Text
4" COMPACTED ABC
AutoCAD SHX Text
COMPACTED SUBGRADE
AutoCAD SHX Text
VENT PIPE
AutoCAD SHX Text
1.5% SLOPE
AutoCAD SHX Text
0% SLOPE
AutoCAD SHX Text
RESTROOM
AutoCAD SHX Text
RESTROOM
AutoCAD SHX Text
VENT PIPE
AutoCAD SHX Text
VENT PIPE
AutoCAD SHX Text
ROOF LINE ABOVE
AutoCAD SHX Text B
AutoCAD SHX Text B
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text
NOTE: CONCRETE PLAZA NOT SHOWN
AutoCAD SHX Text
1.5% SLOPE
AutoCAD SHX Text
TO DRAIN
AutoCAD SHX Text
1.5% SLOPE
AutoCAD SHX Text
TO DRAIN
AutoCAD SHX Text
VAULT
AutoCAD SHX Text
CONCRETE FLOOR SLAB
AutoCAD SHX Text
1/2" EXPANSION JOINT
AutoCAD SHX Text
4" CONCRETE WITH FIBER MESH AT MID-DEPTH
AutoCAD SHX Text
4" ABC
AutoCAD SHX Text 3:1
AutoCAD SHX Text 3:1
AutoCAD SHX Text
TYPICAL CUT DETAIL
AutoCAD SHX Text 3:1
AutoCAD SHX Text
SECTION A-A GRADING DETAILS
AutoCAD SHX Text
CONCRETE FLOOR SLAB
AutoCAD SHX Text 2%
AutoCAD SHX Text
NATURAL GROUND
AutoCAD SHX Text
CONCRETE FLOOR SLAB
AutoCAD SHX Text
NATURAL
AutoCAD SHX Text
VAULT
AutoCAD SHX Text
VAULT
AutoCAD SHX Text
TYPICAL FILL DETAIL
AutoCAD SHX Text
GROUND
AutoCAD SHX Text 2%
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text
SIDE ELEVATION
AutoCAD SHX Text
GENERAL NOTES
AutoCAD SHX Text
NOTE: CONCRETE PLAZA NOT SHOWN.
AutoCAD SHX Text
1. EXCAVATION FOR TOILET VAULTS SHALL BE MADE LARGE ENOUGH TO FACILITATE COMPACTION EQUIPMENT, AND SHALL ALLOW FOR 4" COMPACTED ABC LEVELING COURSE. LEVELING COURSE SHALL BE SLOPED AS SHOWN.
AutoCAD SHX Text
NOTE: CONCRETE PLAZA NOT SHOWN.
AutoCAD SHX Text
REAR ELEVATION
AutoCAD SHX Text
NOTE: CONCRETE PLAZA NOT SHOWN.
AutoCAD SHX Text
FRONT ELEVATION
AutoCAD SHX Text
PLAN VIEW
SECTION B-B GRADING DETAILS
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
GATE DETAILS
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-11 11 14
AutoCAD SHX Text
%%U GENERAL NOTES:
AutoCAD SHX Text
1/4" X 4-1/2" ROUND CAP
AutoCAD SHX Text
PLACE POST SO THAT
AutoCAD SHX Text
HOLES ARE PARALLEL
AutoCAD SHX Text
3" SCHEDULE 40 PIPE
AutoCAD SHX Text
METHOD B CONCRETE
AutoCAD SHX Text
WELD STOP AFTER HEIGHT
AutoCAD SHX Text
ADJUSTMENT IN FIELD
AutoCAD SHX Text
STEEL TUBING
AutoCAD SHX Text
TO ROAD
AutoCAD SHX Text
SEE HINGE DETAIL
AutoCAD SHX Text
THIS SHEET
AutoCAD SHX Text
%%UHINGE POST
AutoCAD SHX Text
3" SCHEDULE
AutoCAD SHX Text
CONCRETE
AutoCAD SHX Text
SET TOP OF LOCKING POST B LEVEL WITH SECOND LOCKING POST B
AutoCAD SHX Text
40 PIPE
AutoCAD SHX Text
METHOD B
AutoCAD SHX Text B
AutoCAD SHX Text
SIDE VIEW
AutoCAD SHX Text
%%ULOCKING POST
AutoCAD SHX Text 3/16"
AutoCAD SHX Text
(ALL AROUND)
AutoCAD SHX Text
(ALL AROUND)
AutoCAD SHX Text 1/8"
AutoCAD SHX Text
12" I.D. PIPE
AutoCAD SHX Text
1/4" X 13" DIA.
AutoCAD SHX Text L
AutoCAD SHX Text P
AutoCAD SHX Text
CUT 1-5/8" X 3" OPENING IN TOP OF 2" X 2" TUBE TO RECEIVE MASTER LOCKING PIN
AutoCAD SHX Text
SLOT BOTTOM TUBE 3/8" X 1-1/2"
AutoCAD SHX Text
%%U LOCKING POST DETAILS
AutoCAD SHX Text
1/4" X 13" DIA.
AutoCAD SHX Text L
AutoCAD SHX Text P
AutoCAD SHX Text
%%USINGLE LANE GATE INSTALLATION DETAIL%%U
AutoCAD SHX Text
LOCKING POST B
AutoCAD SHX Text
HINGE POST A SEE DETAILS THIS SHEET
AutoCAD SHX Text
LOCKING POST B
AutoCAD SHX Text
SEE DETAILS
AutoCAD SHX Text
THIS SHEET
AutoCAD SHX Text
%%U GATE CLOSURE SIGN DETAIL
AutoCAD SHX Text 4" x 12" TYPE 2 (MUTCD) OBJECT MARKER EACH SIDE, EACH POS, BOTH SIDES.
AutoCAD SHX Text
RED & WHITE RETROREFLECTIVE TAPE AT 16" INTERVALS
AutoCAD SHX Text 1/8"
AutoCAD SHX Text
LOCK BARS
AutoCAD SHX Text
LOCK OR MULTIPLE
AutoCAD SHX Text
SLOT FOR SINGLE
AutoCAD SHX Text 1/2" X 1-3/4"
AutoCAD SHX Text
1/4" BARS
AutoCAD SHX Text
(INSIDE & OUTSIDE ONLY,GRIND OUTSIDE SMOOTH) TYP.
AutoCAD SHX Text
%%UMASTER LOCKING PIN
AutoCAD SHX Text
%%UMULTIPLE LOCKING SYSTEM
AutoCAD SHX Text
1/4" SQUARE BARS
AutoCAD SHX Text
EACH PIN 1" X 2-3/4"
AutoCAD SHX Text
OUTSIDE DIMENSIONS
AutoCAD SHX Text
PROVIDE MASTER PIN AND
AutoCAD SHX Text
2 MULTIPLE LOCK BARS W/
AutoCAD SHX Text
GATE
AutoCAD SHX Text
MASTER PIN
AutoCAD SHX Text
3" SCHEDULE
AutoCAD SHX Text
40 PIPE
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text
SECTION A-A
AutoCAD SHX Text
%%UHINGE DETAILS
AutoCAD SHX Text
1/4" X 5" DIA. X 3-1/2" DIA. STOP
AutoCAD SHX Text 1/4 "X 2"X 2"
AutoCAD SHX Text
HINGE TAB
AutoCAD SHX Text
GUSSET
AutoCAD SHX Text
(ALL AROUND)
AutoCAD SHX Text 3/16"
AutoCAD SHX Text 1/4 "X 2"X 2"
AutoCAD SHX Text
GUSSET
AutoCAD SHX Text
HINGE TAB
AutoCAD SHX Text
3-3/4" DIA.
AutoCAD SHX Text
3" SCHEDULE
AutoCAD SHX Text
40 PIPE
AutoCAD SHX Text 3/16"
AutoCAD SHX Text
AT BOTTOM ONLY
AutoCAD SHX Text
STEEL TUBING
AutoCAD SHX Text
1. PAINT ALL EXPOSED METAL WITH ONE COAT PRIMER AND TWO COATS OF FINISH PER SPECIFICATION 09900. 2. GATE INCLUDES ALL SIGNING SHOWN. 3. FINAL GATE LOCATIONS SHALL BE STAKED BY THE COR. 4. ALL HARDWARE SHALL BE VANDAL RESISTANT.
AutoCAD SHX Text
FINISHED ROAD SURFACE
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text B
AutoCAD SHX Text
SECTION B-B
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
TYPE 1 ACCESSIBLE RAMP DETAIL
TYPE 1 - SECTION A
TYPE 1 - SECTION B
TYPE 2 ACCESSIBLE RAMP DETAIL
TYPE 2 - SECTION C
TYPE 2 - SECTION C
TYPE 3 ACCESSIBLE RAMP DETAIL
TYPE 3 - SECTION E
TYPE 3 - SECTION F
WHEEL STOP DETAIL
SECTION
PICNIC TABLE PAD DETAIL
CURB AND GUTTER DETAIL (CATCH)
CURB AND GUTTER DETAIL (RELEASE)
CURB OPENING DETAIL
VALLEY GUTTER DETAIL
PAD TO BE SLOPED WITH 1.5% MAX SLOPE TO ONE EDGE FOR
DRAINAGE. EDGE TO BE DETERMINED IN THE FIELD BY CONTRACTOR
AND COR.
DRAWN
DESIGNER
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
SITEWORK
DETAILS AND SECTIONS
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-12 12 14
AutoCAD SHX Text
TROWEL 3/8"
AutoCAD SHX Text
EVERY 1"
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text
CURB AND GUTTER
AutoCAD SHX Text
BACK EDGE OF RAMP
AutoCAD SHX Text
FINISHED PARKING LOT SURFACE
AutoCAD SHX Text
TOP OF SIDEWALK AND CURB
AutoCAD SHX Text
BACK EDGE OF
AutoCAD SHX Text
RAMP
AutoCAD SHX Text
FINISHED PARKING LOT SURFACE
AutoCAD SHX Text
CURB AND GUTTER
AutoCAD SHX Text
4" CONCRETE WALK REINFORCED WITH FIBER MESH
AutoCAD SHX Text
4" ABC
AutoCAD SHX Text
BACK EDGE OF RAMP
AutoCAD SHX Text
8.33% MAX.
AutoCAD SHX Text
8.33% MAX.
AutoCAD SHX Text
TROWEL 3/8" DEEP
AutoCAD SHX Text
GROOVES EVERY 1"
AutoCAD SHX Text A
AutoCAD SHX Text
CURB AND GUTTER
AutoCAD SHX Text
DRIVEWAY ORIENTATION VARIES
AutoCAD SHX Text
LOCATION AS SHOWN ON THE DRAWINGS
AutoCAD SHX Text
FINISHED PARKING LOT SURFACE
AutoCAD SHX Text
TOP OF SIDEWALK
AutoCAD SHX Text
LOCATION AS SHOWN ON THE DRAWINGS
AutoCAD SHX Text
BACK EDGE OF
AutoCAD SHX Text
RAMP AND CURB
AutoCAD SHX Text
FINISHED PARKING LOT SURFACE
AutoCAD SHX Text
CURB AND GUTTER/ VALLEY GUTTER
AutoCAD SHX Text
4" CONCRETE WALK REINFORCED WITH FIBER MESH
AutoCAD SHX Text
4" ABC
AutoCAD SHX Text
BACK EDGE OF RAMP
AutoCAD SHX Text
8.33% MAX.
AutoCAD SHX Text
SIDEWALK
AutoCAD SHX Text
1% SLOPE
AutoCAD SHX Text
SINGLE CURB SEE DETAIL THIS SHEET
AutoCAD SHX Text
SINGLE CURB SEE DETAIL THIS SHEET
AutoCAD SHX Text
CURB
AutoCAD SHX Text B
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text
BACK EDGE OF RAMP
AutoCAD SHX Text
LOCATION AS SHOWN ON THE DRAWINGS
AutoCAD SHX Text
FINISHED PARKING LOT SURFACE
AutoCAD SHX Text
TOP OF CURB
AutoCAD SHX Text
LOCATION AS SHOWN ON THE DRAWINGS
AutoCAD SHX Text
BACK EDGE
AutoCAD SHX Text
OF RAMP
AutoCAD SHX Text
FINISHED PARKING LOT SURFACE
AutoCAD SHX Text
CURB AND GUTTER
AutoCAD SHX Text
4" CONCRETE WALK REINFORCED WITH FIBER MESH
AutoCAD SHX Text
4" ABC
AutoCAD SHX Text
BACK EDGE OF RAMP
AutoCAD SHX Text
CURB AND GUTTER
AutoCAD SHX Text
CURB
AutoCAD SHX Text
TOP OF CURB
AutoCAD SHX Text
8.33% MAX.
AutoCAD SHX Text
SIDEWALK OR PATH
AutoCAD SHX Text
DEEP GROOVES
AutoCAD SHX Text
TROWEL 3/8"
AutoCAD SHX Text
EVERY 1"
AutoCAD SHX Text
DEEP GROOVES
AutoCAD SHX Text
1/2" RADIUS, TYP.
AutoCAD SHX Text
PARKING LOT FINISHED SURFACE
AutoCAD SHX Text
SIDEWALK
AutoCAD SHX Text
GUTTER LINE
AutoCAD SHX Text
CURB OPENING WHERE
AutoCAD SHX Text
CURB OPENING WHERE SHOWN ON PLANS
AutoCAD SHX Text
FINISHED PARKING LOT SURFACE
AutoCAD SHX Text
CONCRETE
AutoCAD SHX Text
CONTINUOUS
AutoCAD SHX Text
#4 REBAR
AutoCAD SHX Text
#4 REBAR @ 18" LONG, TYP.
AutoCAD SHX Text
ANCHOR HOLES
AutoCAD SHX Text
5/8" DIA.
AutoCAD SHX Text
NOTE: CONSTRUCT AN EXPANSION JOINT EVERY 50',
AutoCAD SHX Text
WHEEL STOP
AutoCAD SHX Text B
AutoCAD SHX Text B
AutoCAD SHX Text
1/2" RADIUS, TYP.
AutoCAD SHX Text
PARKING LOT FINISHED SURFACE
AutoCAD SHX Text
SIDEWALK
AutoCAD SHX Text
NOTE: CONSTRUCT AN EXPANSION JOINT EVERY 50',
AutoCAD SHX Text
FINISHED PARKING LOT SURFACE
AutoCAD SHX Text
CURB AND GUTTER
AutoCAD SHX Text
4" CONCRETE VALLEY GUTTER REINFORCED WITH FIBER MESH
AutoCAD SHX Text
FLOW LINE
AutoCAD SHX Text
FINISHED PARKING LOT SURFACE
AutoCAD SHX Text
4" AB
AutoCAD SHX Text
4" AB
AutoCAD SHX Text
4" AB
AutoCAD SHX Text
SHOWN ON PLANS
AutoCAD SHX Text
REFER TO SPECIFICATIONS FOR RIPRAP SIZE.
AutoCAD SHX Text
7'X5' RIPRAP MAT WITH 18" DEPTH.
AutoCAD SHX Text
REFERENCE POINT
AutoCAD SHX Text
REFERENCE POINT
AutoCAD SHX Text
BROOM FINISH
AutoCAD SHX Text
4" CONCRETE SLAB REINFORCED WITH FIBER MESH
AutoCAD SHX Text
4" AGGREGATE BASE
AutoCAD SHX Text
NOTE: ALL CONCRETE SLABS SHALL HAVE A TURNDOWN ON ALL EDGES.
AutoCAD SHX Text
3/4" RADIUS, TYP.
AutoCAD SHX Text
3/4" RADIUS, TYP.
AutoCAD SHX Text
NATURAL GROUND
AutoCAD SHX Text 4:1
AutoCAD SHX Text 4:1
AutoCAD SHX Text 4:1
AutoCAD SHX Text
NATURAL GROUND
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
DUMPSTER PAD SECTION
PICNIC PAD LAYOUT DETAIL (PLAN VIEW)
THREE-PANEL KIOSK DETAIL
GABION BASKET WALL DETAIL
PERMITTEE RAMP DETAILS
PUBLIC-USE RAMP DETAILS
FREESTANDING SIDEWALK DETAIL
3'X3' GABION BASKETS. TIED
TOGTHER AT ALL CONTACT POINTS
PER INDUSTRY STANDARDS. FILLED
WITH ANGULAR RIPRAP CLASS 2.
2' SET BOTTOM ROW 2-FOOT
BELOW EXISTING GRADE.
PLACE LOOSE RIP RAP
ALONG FACE OF EXPOSED
BASKETS AT A DEPTH OF 8"
TONTO NATIONAL FOREST
TAMPER
RESISTANT
FASTENERS
INFORMATION
4" TACKBOARD ONLY
(NO COVER)
RIGHT RAIL REMOVABLE.
SECURED WITH TAMPER
RESISTANT FASTENERS
4" TACKBOARD ONLY
(NO COVER)
4" TACKBOARDWITH 3
16"
CLEAR POLYCARBONATE
COVER
LEFT RAIL PERMANENTLY
SECURED
COMPACTED NATIVE
SURFACE
CONCRETE
FOOTING (TYP)24"
6"
RAMP PLAN DETAIL
RAMP PLAN DETAIL
RAMP SECTION DETAIL
RAMP SECTION DETAILSIDEWALK TO BE SLOPED WITH 1.5% MAX SLOPE TO ONE EDGE FOR
DRAINAGE. EDGE TO BE DETERMINED IN THE FIELD BY CONTRACTOR
AND COR. ALL FREESTANDING SIDEWALK TO BE SET 1" ABOVE
GRADE ON THE LOWSIDE.
SIDEWALK TRANSITION TO TRAIL DETAIL
DRAWN
DESIGNER
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
SITEWORK
DETAILS AND SECTIONS
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-13 13 14
16.83'
EXISTING GRILL TO
BE RELOCATED
HERE (CENTERED)
EXISTING TABLE TO
BE PLACED HERE
5.7'
4' M
IN
4.
2'
DESIGN PARAMETERS FOR BOTH RAMPS
1. SLOPE RAMPS AT 8.33% MAXIMUM.
2. CONCRETE CABLED MATS WILL BE
USED FOR THE RAMP SURFACE AND
STRUCTURE.
3. END OF MAT ON WATER SIDE TO BE
ANCHORED WITH A PREFAB
CONCRETE ANCHOR TO PREVENT
DISPLACEMENT DURING HIGH RIVER
FLOWS. ANCHOR TO BE 300 POUND
MINIMUM AT EACH RIVER SIDE
CORNER.
4. RAMP TO EXTEND 15 FEET PAST
THE TOE OF SLOPE.
5. PUBLIC USE RAMP TO HAVE
BOULDERS TO ACCOUNT FOR
GRADE CHANGES.
6. BEGINNING OF RAMPS TO BE
ANCHORED INTO CONCRETE
SIDEWALK WITH THICKENED EDGE
OR THICKENED EDGE OF NEW
PAVEMENT.
CONCRETE CABLE
MAT OR APPROVED
EQUAL
CONCRETE CABLE
MAT OR APPROVED
EQUAL
BOULDERS TO STABILIZE
SLOPE UNTIL NATURAL
GRADE CAN MATCH AT A
3:1 SLOPE
SLOPE FROM
EXISTING GRADE
AT 3:1 SLOPE TO
MATCH RAMP
NOTE: APPLIES TO BOTH
PUBLIC USE RAMPS.
MIDDLE ONE SHOWN AS
REFERENCE
NOTE: EXISTING CONCRETE PADS TO
BE EXTENDED AS SHOWN TO ACCOUNT
FOR GRILL RELOCATION.
AutoCAD SHX Text
NOTE: CONSTRUCT AN EXPANSION JOINT EVERY 50',
AutoCAD SHX Text
BROOM FINISH
AutoCAD SHX Text
4" CONCRETE
AutoCAD SHX Text
CONTRACTION JOINTS 5' O.C., TYP. WITH 1/4" RADIUS
AutoCAD SHX Text
1/2" PREFORMED BITUMINOUS
AutoCAD SHX Text
EXPANSION JOINT MATERIAL
AutoCAD SHX Text
4" CONCRETE WALK REINFORCED WITH FIBER MESH
AutoCAD SHX Text
CONTINUE THROUGH CURB AND GUTTER.
AutoCAD SHX Text
TURNDOWN
AutoCAD SHX Text
3:1 FILL OR CUT AS REQUIRED
AutoCAD SHX Text
4" AB
AutoCAD SHX Text
CURB AND GUTTER
AutoCAD SHX Text
BROOM FINISH
AutoCAD SHX Text
3/4" RADIUS, TYP.
AutoCAD SHX Text
SLOPE TO DRAIN
AutoCAD SHX Text
SIDEWALK
AutoCAD SHX Text
%%USIDEWALK NEXT TO CURB DETAIL
AutoCAD SHX Text
%%USIDEWALK JOINT DETAIL
AutoCAD SHX Text
1% SLOPE
AutoCAD SHX Text
ASPHALT FINISHED SURFACE
AutoCAD SHX Text
#4 REBAR AT 12" O.C BOTH WAYS
AutoCAD SHX Text
NATURAL GROUND
AutoCAD SHX Text
4" AGGREGATE BASE
AutoCAD SHX Text
BROOM FINISH
AutoCAD SHX Text
4" CONCRETE SLAB REINFORCED WITH FIBER MESH
AutoCAD SHX Text
4" AGGREGATE BASE
AutoCAD SHX Text
NOTE: ALL CONCRETE SLABS SHALL HAVE A TURNDOWN ON ALL EDGES.
AutoCAD SHX Text
3/4" RADIUS, TYP.
AutoCAD SHX Text
3/4" RADIUS, TYP.
AutoCAD SHX Text
NATURAL GROUND
AutoCAD SHX Text 4:1
AutoCAD SHX Text 4:1
AutoCAD SHX Text 4:1
AutoCAD SHX Text
NATURAL GROUND
AutoCAD SHX Text
SIDEWALK ADJACENT TO TRAIL
AutoCAD SHX Text
4" AGGREGATE BASE
AutoCAD SHX Text
24"X4" TURNDOWN DOWELED INTO TERMINATION OF SIDEWALK
AutoCAD SHX Text
TRAIL
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
60°
TYP
DRAWN
DESIGNER
STAMPS, LOGOS, AND SEALS
PROJECT NAME
DRAWING TITLE
CHECKED
ARCHIVE NO.DATE
PROJECT NO.
DRAWING SHEET NO.
DATENO.
REVISION / ISSUE
OFSHEET
United States Department of Agriculture Forest Service
8/1 6/2
4 1 0:
L
RO
LL
IN
S
C:
\U
SE
RS
\L
RO
LL
IN
S\
BO
X\
RA
MP
CH
AR
TE
RT
EA
M- W
OR
KI
NG
FO
LD
ER
S\
RA
MP
MS
ST
EA
M\
MS
S_
PR
OJ
EC
TS
UP
PO
RT
_W
OR
KI
NG
DO
CS
\T
ON
TO
\G
RA
NI
TE
R
EE
F\
DR
AW
IN
GS
\D
ES
IG
N\
GR
AN
IT
E
RE
EF
IM
PR
OV
EM
EN
TS
.D W
G;
R03
SOUTHWEST REGION
GRANITE REEF
TONTO NATIONAL
FOREST
MESA RANGER DISTRICT
SIGNING & STRIPING
DETAILS
03/08/2024
L.ROLLINS
L.ROLLINS
L.ROLLINS
C-14 14 14
AutoCAD SHX Text
ARROW DETAILS
AutoCAD SHX Text
AutoCAD SHX Text
SOLID WHITE
AutoCAD SHX Text 10"
AutoCAD SHX Text 8"
AutoCAD SHX Text R=2'-2"
AutoCAD SHX Text 1'-4"
AutoCAD SHX Text 11 1/2"
AutoCAD SHX Text
CURVED ARROW DETAILS
AutoCAD SHX Text
CHEVRON STRIPING DETAIL
AutoCAD SHX Text
4" WHITE STRIPE, TYP.
AutoCAD SHX Text R=2'-2"
AutoCAD SHX Text 10"
AutoCAD SHX Text 11 1/2"
AutoCAD SHX Text 8"
AutoCAD SHX Text 5"
AutoCAD SHX Text
%%U PAVEMENT MARKING DETAIL
AutoCAD SHX Text
ACCESSIBLE PARKING SYMBOL
AutoCAD SHX Text
4" SOLID WHITE LINE
AutoCAD SHX Text
NATIVE SURFACE
AutoCAD SHX Text
%%U INSTALLATION DETAILS %%U
AutoCAD SHX Text
U-CHANNEL POST
AutoCAD SHX Text 60"
AutoCAD SHX Text 18"
AutoCAD SHX Text
ACCESSIBLE PARKING POST
AutoCAD SHX Text
PAINTED WHITE SYMBOL
AutoCAD SHX Text
PARKING
AutoCAD SHX Text
RESERVED
AutoCAD SHX Text 5'x 5' HANDICAP SYMBOL PAINTED SOLID HANDICAP BLUE
AutoCAD SHX Text
CONCRETE FOOTING 12" DIA.
AutoCAD SHX Text
FILL MATERIAL OR
AutoCAD SHX Text
CURB & GUTTER EDGE OF PAVEMENT
AutoCAD SHX Text
PAINTED 4" SOLID WHITE LINE STRIPING
AutoCAD SHX Text
ACCESSIBLE PARKING SYMBOL. SEE DETAIL THIS SHEET
AutoCAD SHX Text
2' BEHIND SIDEWALK IN CONCRETE FOOTING
AutoCAD SHX Text
SEE DETAIL THIS SHEET
AutoCAD SHX Text
INSTALL ACCESSIBLE PARKING SIGN
AutoCAD SHX Text
CENTERED ON PARKING STALL
AutoCAD SHX Text
4" WHITE LINES TYP.
AutoCAD SHX Text
%%U ACCESSIBLE PARKING STRIPING DETAIL
AutoCAD SHX Text
%%UGENERAL NOTES:
AutoCAD SHX Text
1. SIGN FACES SHALL MEET THE MINIMUM STANDARDS OF THE USFS SIGN MANUAL. LINK TO MANUAL PROVIDED DURING SOLICITATION. 2. CONTRACTOR SHALL INSTALL ALL SIGNS IN ACCORDANCE WITH THE USFS SIGN MANUAL. 3. ALL SIGN BOARDS AND POSTS ARE CONTRACTOR FURNISHED. 4. FINAL LOCATION OF ALL SIGNS SHALL BE APPROVED BY THE COR. 5. ALL HARDWARE SHALL BE VANDAL RESISTANT. ANY SPECIAL TOOLS REQUIRED FOR REMOVAL OF HARDWARE SHALL BE SUPPLIED BY THE CONTRACTOR.
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
| Granite Reef Improvements Cover C-01 |
| Sheets and Views |
| C-01 COVER SHEET |
| Granite Reef Improvements-General Notes 02 |
| Sheets and Views |
| General Notes 02 |
| OLE1 |
| Granite Reef Improvements-Demo 03 |
| Sheets and Views |
| Demo 03 |
| OLE1 |
| Granite Reef Improvements-Demo 04 |
| Sheets and Views |
| Demo 04 |
| OLE1 |
| Granite Reef Improvements-Siteplan 05 |
| Sheets and Views |
| Siteplan 05 |
| OLE1 |
| Granite Reef Improvements-SIte Improvements 06 |
| Sheets and Views |
| SIte Improvements 06 |
| OLE1 |
| Granite Reef Improvements-Site Improvements 07 |
| Sheets and Views |
| Site Improvements 07 |
| OLE1 |
| Granite Reef Improvements-Signing & Striping 08 |
| Sheets and Views |
| Signing & Striping 08 |
| OLE1 |
| Granite Reef Improvements-Signing & Striping 09 |
| Sheets and Views |
| Signing & Striping 09 |
| OLE1 |
| Granite Reef Improvements-Toilet Details 10 |
| Sheets and Views |
| Toilet Details 10 |
| OLE1 |
| Granite Reef Improvements-Gate Details 11 |
| Sheets and Views |
| Gate Details 11 |
| OLE1 |
| Granite Reef Improvements-Sitework Details 12 |
| Sheets and Views |
| Sitework Details 12 |
| OLE1 |
| Granite Reef Improvements-Sitework Details 13 |
| Sheets and Views |
| Sitework Details 13 |
| OLE1 |
| Granite Reef Improvements-Sign & Stripe Details 14 |
| Sheets and Views |
| Sign & Stripe Details 14 |
| OLE1 |
| 2024-08-19T17:05:06-0700 | |
| MICHELLE TOM |
| FE Date: 8/19/24 | |
| 2024-08-19T13:08:24-0700 | |
| DEVIN QUINTANA |
| DR Date: 8/19/24 | |
| 2024-08-21T10:42:46-0600 | |
| ZACHARY PARSONS |
| DDR Date: 8/21/24 | |
| FS Date: 8/21/2024 | |
| 2024-08-21T11:00:06-0600 | |
| DANNY MONTOYA |
DER Date: 8/21/2024
File details come from the government source that posted it. Updated .