A07_Attachment 1 - Updated Statement of Work.pdf
PDF 299 KB Posted
- Attached to
- 12441923Q0174_Micro Motion Meter Frames RFQ Federal contract opportunity
- Solicitation number
- 12441923Q0174
- Issued by
- Department of Agriculture Forest Service
About this file
This statement of work outlines requirements for thirteen mass flow meter stands to be provided to the U.S. Forest Service. The stands will support mass flow meters used to monitor retardant weight and density during air tanker loading. The custom welded stands must be powder coated red and support meters weighing up to 180 pounds in a horizontal configuration. Horizontal brackets will bolt a 20"x20"x12" metal enclosure to the frame, within which the meter transmitter/display and other components will be housed. Delivery is required to the U.S. Forest Service National Technology and Development Center in San Dimas, California. The related federal contract opportunity posted by the Department of Agriculture Forest Service seeks quotes for the thirteen mass flow meter frames specified in the statement of work.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 12441923Q0174_Micro Motion Meter Stands_Amendment 01.pdf | ||
| 12441923Q0174_Micro Motion Meter Stands_Combined SS_RFQ.pdf | ||
| A06_Attachment 2 - Specifications.pdf | ||
| A06_Attachment 1 - Statement of Work.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
1. INTRODUCTION: This requirement will provide needed Mass Flow Meter Stands for the U.S. Forest Service, National Technology and Development Center located at 444 E. Bonita Avenue, San Dimas, CA 91773-3101.
2. BACKGROUND: The U.S. Forest Service has a need for Mass Flow Meter Stands to use in conjunction with Mass Flow Meters currently in the U.S. Forest Service inventory. The Mass Flow Meters monitor the weight and density of the retardant as it is loaded into air tankers. The Flow Meters consist of a sensor and a display/transmitter. The sensor component is unable to stay upright on its own and requires a stand. The Mass Flow Meter Stand is a necessary part of the functionality of the equipment.
3. DESCRIPTION: The contractor shall provide all supervision, labor, tools, and supplies to provide Thirteen
(13) Flow Meter Stands as indicated in section 4 of this document and attached “Specifications”
4. GENERAL REQUIREMENTS: The Mass Flow Meter Stands shall be:
a. Custom welded (MIG Weld), surface prep is sandblast, primed and then Powder coated Red. Color:
Tiger Drylac# 38-30034. Painted frame with the ability to securely hold a large metal sensor weighing a minimum 180lbs.
b. Bolts shall support the sensor flanged ends to flanged connectors. The stand shall support the full weight of the sensor.
c. The sensor is mounted in a horizontal configuration on the frame.
d. Forklift boxes shall be included on the bottom of the stand.
e. The stand shall have horizontal brackets to bolt a 20”x20”x12” metal enclosure. Within this metal enclosure is the transmitter/display for the sensor and other components. Figure 1
f. horizontal brackets shall have 8 holes, older design had slots, Figure 2.
5. DELIVERY LOCATION: U.S. Forest Service, National Technology and Development Center located at 444 E. Bonita Avenue, San Dimas, CA 91773-3101.
6. Statement of Work Attachment:
a. Specifications
Figure 2. Drawing illustrating change from slots to holes
Figure 1. Dimensional Drawing of enclosure to be mounted to the frame
File details come from the government source that posted it. Updated .