CompleteSolicitation 37.pdf
PDF 738 KB Posted
- Attached to
- Lower Foley Seed Orchard Fence Replacement Federal contract opportunity
- Solicitation number
- 1240BH25R0003
About this file
This document details technical specifications for fence products in Section 3.3 of the solicitation for the Lower Foley Seed Orchard Fence Replacement project. The specifications outline precise requirements for multiple fence components, including woven wire fence (minimum Bekaert® #1478-6, 6'-6" high tensile galvanized), barbless wire (12½ gauge, 2 strand), and various steel tube posts with specific dimensional and strength characteristics.
The technical details include precise measurements and material specifications for gate posts, corner posts, interim (line) posts, and horizontal/cross compression members. All posts are specified as galvanized commercial grade steel tubes with requirements for outer diameter, wall thickness, gauge, yield strength, and compliance with ASTM F10043 and RR-F-191/3 standards. Each post type must include a galvanized steel wire arm for barbless wire connection, with variations in arm angle depending on post type. The document provides comprehensive technical guidance for constructing a fence system with exacting material and structural standards.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RevisedCompleteSolicitation.pdf | ||
| Amendment3.pdf | ||
| Amendment2.pdf | ||
| CompleteSolicitation 3.pdf | ||
| Amendment1.pdf | ||
| CompleteSolicitation 4.pdf | ||
| CompleteSolicitation 36.pdf | ||
| QandAs.pdf | ||
| CompleteSolicitation.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
3.3 Products
A. General
• These products shall apply to the entire project.
B. Woven Wire Fence
• Minimum: Bekaert® #1478-6. 6’-6” High Tensile woven wire, galvanized or approved equal.
C. Barbless Wire
• 12½ gauge, 2 Strand, galvanized.
D. Posts
• Gate Posts (Gate attaches to this post) o Galvanized Commercial Grade Steel Tube
4” O.D. 0.160” Wall Thickness 8 Gauge x10 feet long (minimum). Length per gate manufacturer requirements.
1 5/8” O.D. 0.111” Wall Thickness 12 Gauge Horizontal/Cross Rail (Compression Members)
50,000 PSI Minimum Yield Strength
ASTM F10043
RR-F-191/3, Class 1, Grade B Provide with galvanized steel wire arm on each post top, no angle, for barbless wire connection. Size to match post diameter.
• Corner Posts/ Corner Panel Posts/ Gate Panel Posts/ Stress Panel Posts o Galvanized Commercial Grade Steel Tube 3” O.D. 0.160” Wall Thickness 9 Gauge x 10 feet long (minimum) 1 5/8” O.D. 0.111” Wall Thickness 12 Gauge Horizontal/ Cross Rail (Compression
Members).
50,000 PSI Minimum Yield Strength
ASTM F10043
RR-F-191/3, Class 1, Grade B Provide with galvanized steel wire arm on each post top, 45 degrees, for barbless wire connection. Size to match post diameter
• Interim (Line) Posts o Galvanized Commercial Grade Steel Tube 2 3/8” O.D. 0.130” Wall thickness 10 Gauge x 9 feet long (minimum) 50,000 PSI Minimum Yield Strength
ASTM F10043
RR-F-191/3, Class 1, Grade B Provide with galvanized steel wire arm on each post top, 45 degrees, for barbless wire connection. Size to match post diameter.
E. Horizontal. Cross/Compression Members (Rails)
• Galvanized Commercial Grade Steel Tube o 1 5/8” O.D. 0.111” Wall Thickness 12 Gauge o 50,000 PSI Minimum Yield Strength o ASTM F10043 o RR-F-191/3, Class 1, Grade B
F. Metal Double Swing Gate
1240BH25R0003
Amendment 1 djrapoza Highlight
File details come from the government source that posted it. Updated .