Revised Puncheon Board Dimensions.pdf
PDF 2 MB Posted
- Attached to
- Cedar Shake Roofing and Siding for Pack Creek
- Solicitation number
- 1240BF21Q0071
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Puncheon Board Dimensions
Needed: .5 mile of linear trail boards
Yellow or Red Cedar
Dimensions 3 inch depth by 12 inch width by 24 inch length which equals 6 board feet per unit.
The top sides in this photo have been milled with grooves. Previously used material was rough split on the top, giving more traction and meeting historical standards.
Either method is fine. Ultimately, any material quoted should be cut on 1 side. Untreated/Rustic in nature.
No bark.
3 inches in depth
12 inches width
24 inches length
In bundles of four for ease hauling into job site via pack boards.
The tops sides in this photo have been milled with grooves vs. the previous material purchased which was rough split on the top giving more traction and meeting historical standards.
Either method is fine. Ultimately, any material quoted should be cut on 1 side. Untreated/Rustic in nature, with NO bark.
The following are pictures of the boards previously purchased and after they were installed. Notice the width (12”) is actually the distance each board covers of linear trail and the length(24”) is the width of our trail tread. Therefore, it is important that the rough top side runs parallel along the 24” dimension(perpendicular to the trail).
File details come from the government source that posted it. Updated .