Attachment 6 Part Numbers for Smoke Detectors.pdf

This is a Bill of Materials document for a Fire Alarm Panel Upgrade project at USDA-ARS-MWA in Morris, Minnesota.

The project involves upgrading fire alarm system components and installing replacement smoke detection equipment. Sheet 1 details the primary Fire Alarm Panel Upgrade per Detail #1, which includes a comprehensive list of materials such as a Central Processor Module, Network Communication Card, Signature Dual Driver Controller, modem communicator, 95-watt zoned amplifier, Liquid Crystal Display Module, audio source unit, primary power supply, battery, chassis assembly, blank LRM filler, filler plates, back box, door assembly, battery cabinet, LCD annunciator, surface box, remote booster power supply, batteries, signal module-split amp, and replacement batteries. The scope of work includes re-terminating new panels, re-testing the system, re-programming new panels, and reusing all existing field devices including sensors and notification devices. Sheet 2 presents an alternate option to replace two smoke sensors per Detail #2, specifying a photoelectric smoke detector, standard detector base for 4-inch square box, SuperDuct air sample tube, SuperDuct remote test/reset station with key, and SuperDuct smoke detector housing and shutdown relay. For both details, an electrical contractor is responsible for providing all wire, conduit, and connections, mounting field devices and equipment cabinets, with Ban-Koe handling head-end connections, programming, testing, and training.