1173V310 PORTABLE ENCLOSURE DMD 281 TC Attachment 1.docx

CONTRACT __________________

PRINTED 7 JULY 2021 PAGE _______

ATTACHMENT 1 TO EXHIBIT A (DD FORM 1423)

REQ DOC NO. - 1173V310 ATTACHMENT ____1_____

CONTINUATION SHEET CONTRACT NO. - _______________ PAGE ___ OF ___

NAME OF OFFER OR/CONTRACTOR

______________________________________________________________________________ITEM # SUPPLIES/SERVICES QTY U/I

PORTABLE ENCLOSURE 1 EA

C. DESCRIPTION/SPECIFICATIONS

C.1 PORTABLE ENCLOSURE; FABRIC WITH DOORS, METAL FRAME, 22 FT WIDE X 64 FT LONG X 22 FT HIGH.

C.1.1 THE END WALLS OF THE ENCLOSURE SHALL HAVE A 14 FOOT WIDE (MINIMUM) BY 15 FOOT TALL CLEAR OPENING (MINIMUM) ACCESS PANEL.

C.1.1 ALL HARDWARE, WINCHES, TROLLEYS, PULLEYS, ETC ASSOCIATED WITH THE ACCESS PANEL SHALL BE PROVIDED.

C.1.2 ALL PERSONNEL DOORS SHALL BE EQUIPPED WITH COMMERCIAL, STAINLESS STEEL, “FREEZER DOOR” STYLE HANDLES WITH AN INTERIOR CRASH/RELEASE KNOB/HANDLE/BAR/LATCH FOR FAST EXIT DURING AN EMERGENCY.

C.1.2.1 PERSONNEL DOORS SHALL BE STEEL, ALUMINUM OR FIVERGLASS IN CONSTRCTION. STEEL OR FIBERGLASS SHALL BE COATED TO PRVENT DEGRADATION IN A MARINE ENVIROMENT.

C.1.2.2 SEE STATEMENT OF WORK FOR ADDITIONAL INFORMATION.

C.2 PROVIDE A COMPLETE, INTEGRATED SET OF MUTUALLY DEPENDENT COMPONENTS AND ASSEMBLIES THAT FORM A BILDING SYSTEM CAPABLE OF WITHSTANDING STRUCTURAL AND OTHER LOADS, THERMALLY INDUCED MOVEMENT, AND EXPOSURE TO WEATHER WITHOUT FAILRE OR INFILTRATION OF WATER INTO BUILDING INTERIOR.

C.2.1 PROVIDE BUILDING SYSTEM OF SIZE, AND SPANS INDICATED.

C.2.2 PORTSMOUTH TO REVIEW AND APPROVE COMPLETED DESIGN DRAWING/DIAGRAMS OF ENCLOSURE PRIOR TO START OF FABRICATION.

C.3 THE ASSEMBLED ENCLOSURE SHALL BE DESIGNED TO BE SUFFICIENTLY STRUCTURALLY RIGID TO WITHSTAND A MINIMM WIND LOAD SPEED OF 80 MPH, ROOF LOAD OF 30 PSF (GROUND SNOW LOAD).

C.4 THE BUILDING SHALL BE PROVIDED WITH TIE-DOWN LOCATIONS SUCH THAT THE BUILDING CAN BE TIED DOWN IT WEIGHTS (JERSEY BARRIERS, ECO BLOCKS, KEEL BLOCKS OR SIMILAR) TO MEET LOADING REQUIREMENTS.

C.4.1 SEE STATEMENT OF WORK FOR ADDITIONAL SPECIFICATIONS CONCERNING TIE-DOWN LOCATIONS.

C.5 SEE STATEMENT OF WORK FOR INFORMATION PERTAINING TO LIGHTING AND ELECTRICAL DISTRIBUTION SYSTEM.

C.6 DETAILED INSTALLATION AND USER MANUALS CONTAINING COMPLETE INSTRUCTIONS FOR FIELD HANDLING, ERECTION AND DISMANTLING OF THE BUILDING SHALL BE PROVIDED WITH THE SHIPMENTS.

C.6.1 THE INSTRUCTIONS SHALL PROVIDE AT A MINIMUM, THE REACTION LOADS REQUIRED TO SECURE THE BUILDING DOWN UTILIZING EQUIPMENT PROVIDED BY PORTSMOUTH NAVAL SHIPYARD.

C.7 VENDOR SHALL PROVIDE STRUCTURAL STAMPED DRAWINGS AND CALCULATIONS TO VERIFY THE ENCLOSURE MEETS THE WIND AND SNOW LOADS.

C.8 DATA REQUIREMENTS PER EXHIBIT A (DD-1423) & ATTCHMENT #1.

C.8.1 CERTIFICATE OF STAMPED DRAWINGS AND CALCULATIONS; EXHIBIT A SEQUENCE A001.

(ADP DD FORM 1423 (MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)

CONTRACT DATA REQUIREMENTS LIST

SEQ. NO. A001

CONTRACT __________________

PRINTED 7 JULY 2021 PAGE _______

EXHIBIT A

CONTRACT/SOLICITATION ________________________________________________________________ ITEM ___________________________________________ (DATE FOR ITEM) ___________________

REQUIRED CERTIFICATION

A. CERTIFICATION SHALL BE SUPPLIED WITH EACH SHIPMENT OF MATERIAL. CERTIFICATION (CERTIFICATE OF COMPLIANCE) SHALL BE SUPPLIED AS OUTLINED IN PARAGRAPH B. THE VENDOR IS LIABLE FOR CONDUCTING ALL TESTS, ANALYSES, INSPECTIONS, AND EXAMINATIONS, ETC., AS SPECIFIED BY THE CONTRACT AND SPECIFICATIONS WHETHER CERTIFICATIONS ARE REQUIRED OR NOT.

CERTIFICATE OF COMPLIANCE (PROVIDE THE FOLLOWING VERBATIM STATEMENT OR COMPLETE THE OPTIONAL FORM AT THE END OF THIS PART)

"I ATTEST ALL ITEMS FURNISHED ON THIS CONTRACT ARE IN FULL COMPLIANCE WITH ALL CONTRACT REQUIREMENTS".

B. CERTIFICATION SHALL BE SUPPLIED PER THE FOLLOWING INSTRUCTIONS:

1. THE CERTIFICATION OF COMPLIANCE SHALL CONTAIN THE SIGNATURE AND TITLE OF THE VENDOR OFFICIAL DESIGNATED RESPONSIBLE FOR QUALITY ASSURANCE.

2. THE MATERIAL IDENTIFICATION (E.G. LOT, BATCH, PART #, ETC.) SHALL BE INCLUDED ON THE CERTIFICATE OF COMPLIANCE.

CERTIFICATE OF COMPLIANCE

COMPANY NAME

MATERIL IDENTIFICATION (COMPLETE APPLICABLE ITEMS)

CONTRACT NO. ______________ ORDER NO. ________________ ITEM NO. ____________________ NATIONAL/LOCAL STOCK NO. NSN/LSN ____________________________________________________ MANUFACTURER’S PART NO. _____________________________________________________________ MANUFACTURER’S SERIAL NO. ___________________________________________________________ DRAWING AND PIECE NO. _________________________________________________________________

MANUFACTURER’S LOT/HEAT NOS. AS MARKED ON THE MATERIAL _________________________

ALL INSPECTIONS AND TEST REPORTS REQUIRED BY ATTACHMENT I TO EXHIBIT A (DD FORM 1423) FOR TRACEABILITY TO EACH CONTRACT ITEM MUST ACCOMPANY THIS SIGNED STATEMENT:

THE INSPECTION AND TEST REPORTS (AS APPLICABLE) PROVIDED REPRESENT THE ACTUAL ATTRIBUTES OF THE ITEMS FURNISHED ON THIS CONTRACT AND INDICATE FULL COMPLIANCE WITH ALL CONTRACT REQUIREMENTS. I ATTEST ALL ITEMS FURNISHED ON THIS CONTRACT ARE IN FULL COMPLIANCE WITH ALL CONTRACT REQUIREMENTS.