1-Park-ID-Sign-Dwgs -260126.pdf
PDF 3 MB Posted
- Solicitation number
- CIZ26-PKR-3219
- Issued by
- Dallas County, Dallas City, Texas
About this file
This is a technical drawing specification document for the Dallas Park and Recreation Department pertaining to standard park identification signage to be installed at ten park locations. The project involves the fabrication and installation of monument-style identification signs featuring a 1/4" aluminum face with a perimeter frame constructed from 1.5"x3" steel channel and internal support systems using 3" steel square tubing. The signs will incorporate cast metal or epoxy seals with tamper-resistant fasteners, mounted on standard 8" Schedule 40 steel pipe posts. Specifications include detailed paint requirements using Benjamin Moore products for various sign components, including the exterior border, interior border, field, mask, stripes, and support hardware. The Request for Bids documents became available beginning January 28, 2026 at 8:00 AM, with a pre-bid conference scheduled for February 5, 2026 from 3:00 PM to 4:00 PM (CDT) at Dallas City Hall, Conference Room L1EN-D, offered in both hybrid virtual and in-person formats.
The sign specifications call for satin acrylic polyurethane paint by Mathews Paint with a super satin clear cover coat applied per manufacturer recommendations. All seams are to be continuous welded and ground smooth, with internal cross supports notched at ends to slip onto post stubs. The weld cap and band secure to posts with recessed screws that are tack welded and touched up with matching paint. Engineering design must withstand wind loads and the weight of the cabinet. Prospective bidders are strongly encouraged to register for the pre-bid meeting through Park and Recreation Project Manager Bruktawit Kebede at Bruktawit.kebede@dallas.gov to receive the MS Teams virtual meeting invitation and ensure receipt of any project updates or addendums.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 2-Project Manual Park-ID-Sign FINAL.pdf | ||
| 3-OPS-FRM-627 Workforce Composition Form.doc | DOC document | |
| 4-OPS-FRM-640 -Team Make-Up and Local Workforce Form.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
71 1/2”
1/
2”
1/
2”
PROVIDE SEAL TO MATCH SAMPLE (AVAILABLE UPON REQUEST)
PAINT OUTSIDE BORDER BEN. MOORE HC-172 REVERE PEWTER PAINT INSIDE BORDER
BEN. MOORE HC-49 MAYFLOWER RED.
1/4” ALUMINUM FACE.
PAINT FIELD BEN. MOORE 460 BASE 3/C.
PAINT MASK PARK NAME BEN. MOORE SUPER WHITE 02.
PAINT STRIPES, ADDRESS, EST. BEN. MOORE ESSEX GREEN 43.
PAINT SUPPORTS & HARDWARE BEN. MOORE ESSEX GREEN 43.
TYPICAL MONUMENT ELEVATION SCALE 1”=1’-0”
Park Name 000 Park Address
A
E s t . 1 9 0 0 stefan.kesler Line stefan.kesler Typewritten Text Font: Garamond Book Italic stefan.kesler Line stefan.kesler Line stefan.kesler Typewritten Text Font: Frutiger 67 Bold Condensed stefan.kesler Text Box Color paint: Satin Acrylic Polyurethane by Mathews Paint Clear cover coat: 290228-1/KT, 290228-4/KT Super Satin Clear Kit by Mathews Paint Apply per manufacturer recommendations
1"
INTERNAL CROSS
SUPPORTS-3"X.25" SQ.
STEEL ANGLE NOTCHED
ONLY ON THE ENDS TO SLIP
ONTO POSTS STUBS
C CHANNEL FRAME
ALL SEAMS ARE CONTINUOUS
WELDED AND GROUND
SMOOTH
WELD CAP AND BAND SECURES
TO POST WITH RECESSED
SCREWS TACK WELDED AND TOUCHED
UP WITH PAINT TO MATCH
WELD CAP AND BAND
STANDARD 8" SCHEDULE 40
STEEL WELD CAP W/1" BAND
SEAM WELDED AND GROUND
SMOOTH
SIGNS FASTENS TO POST
W/ .75 INTERNAL NON CORROSIVE
CONCEALED FASTENERS BEFORE
CAP IS SCREWED AND WELDED IN
PLACE
.75" NUT TO WELDED
TO INTERNAL PLATE
POST STANDARD 8"
SCHEDULE 40 STEEL
PIPE W/8.625" OD.
PERIMETER FRAME
1.5"X3" STEEL CHANNEL
.25" THICK
CROSS SUPPORTS
3" STEEL SQUARE TUBING
.25" THICK WALL; ENGINEER TO
WITHSTAND WIND LOADS AND
WEIGHT OF CABINET
POST STUBS
FABRICATED FROM
.25" THICK STOCK
OR TUBING TO FIT SNUGLY
WITHIN STEEL. CROSS
SUPPORTS
ALL SEAMS ARE
CONTINUOUS WELDED
AND GROUND SMOOTH
DETAIL ELEVATION DETAIL ELEVATION
N.T.S. N.T.S.B C
8'0" Panel/18" s eal 10'0" Panel/21" seal
Material Seal: Cast metal or epoxy
Color A.s sl1own
Finish match sample
Installation Seal secured lo pa.nel with tamper resistant fasteners and glu e around per imeter.
Seal Supplier
TBD
Seal Color and Profile Detail l'?"""'•--t--f--- TAMPER RESISTANT FASTENERS.
HOLES IN PANEL MUST BE SLOTTED
SLIGHTLY (LEFT TO RIGHT) TO
ALLOW FOR EXPANSION
stefan.kesler Text Box stefan.kesler Text Box stefan.kesler Text Box stefan.kesler Text Box
Stefan Kesler Stamp
File details come from the government source that posted it. Updated .